1. 11 May, 2015 1 commit
  2. 10 May, 2015 7 commits
  3. 09 May, 2015 12 commits
    • Jason A. Donenfeld's avatar
      usbnet: avoid integer overflow in start_xmit · 3e4336a6
      Jason A. Donenfeld authored
      transfer_buffer_length is of type u32. It's therefore wrong to assign it
      to a signed integer. This patch avoids the overflow.
      
      It's worth noting that entry->length here is a long; perhaps it would be
      beneficial at somepoint to change this to be unsigned as well, if
      nothing else relies on its signedness for error conditions or the like.
      Signed-off-by: default avatarJason A. Donenfeld <Jason@zx2c4.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3e4336a6
    • Tony Camuso's avatar
      netxen_nic: use spin_[un]lock_bh around tx_clean_lock (2) · 240b23c4
      Tony Camuso authored
      This patch should have been part of the previous patch having the
      same summary. See  http://marc.info/?l=linux-kernel&m=143039470103795&w=2
      Unfortunately, I didn't check to see where else this lock was used before
      submitting that patch. This should take care of it for netxen_nic, as I
      did a thorough search this time.
      
      To recap from the original patch; although testing this driver with
      DEBUG_LOCKDEP and DEBUG_SPINLOCK enabled did not produce any traces,
      it would be more prudent in the case of tx_clean_lock to use _bh
      versions of spin_[un]lock, since this lock is manipulated in both
      the process and softirq contexts.
      
      This patch was tested for functionality and regressions with netperf
      and DEBUG_LOCKDEP and DEBUG_SPINLOCK enabled.
      Signed-off-by: default avatarTony Camuso <tcamuso@redhat.com>
      Acked-By: default avatarNeil Horman <nhorman@tuxdriver.com>
      Acked-By: default avatarManish Chopra <manish.chopra@qlogic.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      240b23c4
    • Jean Delvare's avatar
      net: xgene_enet: Set hardware dependency · ccad725c
      Jean Delvare authored
      The xgene_enet driver is only useful on X-Gene SoC.
      Signed-off-by: default avatarJean Delvare <jdelvare@suse.de>
      Cc: Iyappan Subramanian <isubramanian@apm.com>
      Cc: Keyur Chudgar <kchudgar@apm.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ccad725c
    • Jean Delvare's avatar
      net: amd-xgbe: Add hardware dependency · 74a78b15
      Jean Delvare authored
      The amd-xgbe driver currently only works with the Seattle SoC, which
      is ARM64 architecture, so there is no point in building this driver on
      other architectures except for build testing purpose. The dependency
      list can be updated later if the driver ever supports other
      architectures.
      Signed-off-by: default avatarJean Delvare <jdelvare@suse.de>
      Cc: Tom Lendacky <thomas.lendacky@amd.com>
      Cc: Florian Fainelli <f.fainelli@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      74a78b15
    • WANG Cong's avatar
      net_sched: fix a use-after-free in tc_ctl_tfilter() · d7443185
      WANG Cong authored
      When tcf_destroy() returns true, tp could be already destroyed,
      we should not use tp->next after that.
      
      For long term, we probably should move tp list to list_head.
      
      Fixes: 1e052be6 ("net_sched: destroy proto tp when all filters are gone")
      Cc: Jamal Hadi Salim <jhs@mojatatu.com>
      Signed-off-by: default avatarCong Wang <xiyou.wangcong@gmail.com>
      Acked-by: default avatarJamal Hadi Salim <jhs@mojatatu.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d7443185
    • Vasily Titskiy's avatar
      drivers/net/usb: Add support for 'Lenovo OneLink Pro Dock' · 1006da19
      Vasily Titskiy authored
      This device is sold as 'Lenovo OneLink Pro Dock'.
      Chipset is RTL8153 and works with r8152.
      Signed-off-by: default avatarVasily Titskiy <qehgt0@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1006da19
    • Nathan Sullivan's avatar
      net: macb: Handle the RXUBR interrupt on all devices · bfbb92c4
      Nathan Sullivan authored
      The same hardware issue the at91 must work around applies to at least the
      Zynq ethernet, and possibly more devices.  The driver also needs to handle
      the RXUBR interrupt since it turns it on with MACB_RX_INT_FLAGS anyway.
      Signed-off-by: default avatarNathan Sullivan <nathan.sullivan@ni.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bfbb92c4
    • David S. Miller's avatar
      Merge branch 'rds' · d3196a24
      David S. Miller authored
      Sowmini Varadhan says:
      
      ====================
      net/rds: RDS-TCP robustness fixes
      
      This patch-set contains bug fixes for state-recovery at the RDS
      layer when the underlying transport is TCP and the TCP state at one
      of the endpoints is reset
      
      V2 changes: DaveM comments to reduce memory footprint, follow
                  NFS/RPC model where possible. Added test-case #3
      
      Without the changes in this set, when one of the endpoints is reset,
      the existing code does not correctly clean up RDS socket state for stale
      connections, resulting in some unstable, timing-dependant behavior on
      the wire, including an infinite exchange of 3WHs back-and-forth, and a
      resulting potential to never converge RDS state.
      
      Test cases used to verify the changes in this set are:
      
      1. Start rds client/server applications on two participating nodes,
         node1 and node2. After at least one packet has been sent (to establish
         the TCP connection), restart the rds_tcp module on the client, and
         now resend packets. Tcpdump should show server sending a FIN for the
         "old" client port, and clean connection establishment/exchange for
         the new client port.
      
      2. At the end of step 1, restart rds srever on node2, and start client on
         node1, make sure using tcpdump, 'netstat -an|grep 16385' that
         packets flow correctly.
      
      3. start RDS client/server application on two participating nodes, and
         repeat steps 1 and 2, but this time, simulate node failure by doing
         "ifconfig <intf> down", so no FIN is sent.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d3196a24
    • Sowmini Varadhan's avatar
      net/rds: RDS-TCP: only initiate reconnect attempt on outgoing TCP socket. · c82ac7e6
      Sowmini Varadhan authored
      When the peer of an RDS-TCP connection restarts, a reconnect
      attempt should only be made from the active side  of the TCP
      connection, i.e. the side that has a transient TCP port
      number. Do not add the passive side of the TCP connection
      to the c_hash_node and thus avoid triggering rds_queue_reconnect()
      for passive rds connections.
      Signed-off-by: default avatarSowmini Varadhan <sowmini.varadhan@oracle.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c82ac7e6
    • Sowmini Varadhan's avatar
      net/rds: RDS-TCP: Always create a new rds_sock for an incoming connection. · f711a6ae
      Sowmini Varadhan authored
      When running RDS over TCP, the active (client) side connects to the
      listening ("passive") side at the RDS_TCP_PORT.  After the connection
      is established, if the client side reboots (potentially without even
      sending a FIN) the server still has a TCP socket in the esablished
      state.  If the server-side now gets a new SYN comes from the client
      with a different client port, TCP will create a new socket-pair, but
      the RDS layer will incorrectly pull up the old rds_connection (which
      is still associated with the stale t_sock and RDS socket state).
      
      This patch corrects this behavior by having rds_tcp_accept_one()
      always create a new connection for an incoming TCP SYN.
      The rds and tcp state associated with the old socket-pair is cleaned
      up via the rds_tcp_state_change() callback which would typically be
      invoked in most cases when the client-TCP sends a FIN on TCP restart,
      triggering a transition to CLOSE_WAIT state. In the rarer event of client
      death without a FIN, TCP_KEEPALIVE probes on the socket will detect
      the stale socket, and the TCP transition to CLOSE state will trigger
      the RDS state cleanup.
      Signed-off-by: default avatarSowmini Varadhan <sowmini.varadhan@oracle.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f711a6ae
    • Markus Stenberg's avatar
      ipv6: Fixed source specific default route handling. · e16e888b
      Markus Stenberg authored
      If there are only IPv6 source specific default routes present, the
      host gets -ENETUNREACH on e.g. connect() because ip6_dst_lookup_tail
      calls ip6_route_output first, and given source address any, it fails,
      and ip6_route_get_saddr is never called.
      
      The change is to use the ip6_route_get_saddr, even if the initial
      ip6_route_output fails, and then doing ip6_route_output _again_ after
      we have appropriate source address available.
      
      Note that this is '99% fix' to the problem; a correct fix would be to
      do route lookups only within addrconf.c when picking a source address,
      and never call ip6_route_output before source address has been
      populated.
      Signed-off-by: default avatarMarkus Stenberg <markus.stenberg@iki.fi>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e16e888b
    • David S. Miller's avatar
      Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth · 0a801445
      David S. Miller authored
      Johan Hedberg says:
      
      ====================
      Here are a couple of important Bluetooth & mac802154 fixes for 4.1:
      
       - mac802154 fix for crypto algorithm allocation failure checking
       - mac802154 wpan phy leak fix for error code path
       - Fix for not calling Bluetooth shutdown() if interface is not up
      
      Let me know if there are any issues pulling. Thanks.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0a801445
  4. 07 May, 2015 2 commits
  5. 05 May, 2015 7 commits
  6. 04 May, 2015 11 commits