- 19 Oct, 2015 2 commits
-
-
Namhyung Kim authored
Currently libtraceevent emits warning on unsupported event formats. However it'd be better to see them only -v option is given. To do that, it needs to override the warning() function which is used in the libtracevent. Thus add set_warning_routine() same as set_die_routine() and check the verbose flag in our warning routine. Before: # perf test 5 5: parse events tests : Warning: [kvmmmu:kvm_mmu_get_page] bad op token { Warning: [kvmmmu:kvm_mmu_sync_page] bad op token { Warning: [kvmmmu:kvm_mmu_unsync_page] bad op token { Warning: [kvmmmu:kvm_mmu_prepare_zap_page] bad op token { Warning: [kvmmmu:fast_page_fault] function is_writable_pte not defined ... Ok After: # perf test 5 5: parse events tests : Ok Signed-off-by:Namhyung Kim <namhyung@kernel.org> Tested-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by:
David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1445268229-1601-2-git-send-email-namhyung@kernel.orgSigned-off-by:
-
Namhyung Kim authored
Currently, when 'perf test' is run by a normal user, it'll fail to access tracepoint events. The output becomes somewhat messy because it tries to be nice with long error messages and hints. IMHO this is not needed for 'perf test' by default and AFAIK 'perf test' uses pr_debug() rather than pr_err() for such messages so that one can use -v option to see further details on failed testcases if needed. Before: $ perf test 1: vmlinux symtab matches kallsyms : FAILED! 2: detect openat syscall event :Error: No permissions to read /sys/kernel/debug/tracing/events/syscalls/sys_enter_openat Hint: Try 'sudo mount -o remount,mode=755 /sys/kernel/debug/tracing' FAILED! 3: detect openat syscall event on all cpus :Error: No permissions to read /sys/kernel/debug/tracing/events/syscalls/sys_enter_openat Hint: Try 'sudo mount -o remount,mode=755 /sys/kernel/debug/tracing' FAILED! ... After: $ perf test 1: vmlinux symtab matches kallsyms : FAILED! 2: detect openat syscall event : FAILED! 3: detect openat syscall event on all cpus : FAILED! ... $ perf test -v 2 2: detect openat syscall event : --- start --- test child forked, pid 30575 Error: No permissions to read /sys/kernel/debug/tracing/events/syscalls/sys_enter_openat Hint: Try 'sudo mount -o remount,mode=755 /sys/kernel/debug/tracing' test child finished with -1 ---- end ---- detect openat syscall event: FAILED! Signed-off-by:
-
- 14 Oct, 2015 1 commit
-
-
Ingo Molnar authored
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: User visible changes: - Use the alternative with the most descriptive filename containing a vmlinux file for a given build-id, providing a better title line for tools such as 'annotate'. (Arnaldo Carvalho de Melo) - Remove help messages about previous right and left arrow keybidings, that were repurposed for horizontal scrolling. (Arnaldo Carvalho de Melo) - Inform how to reset the symbol filter in the hists browser. (top & report) (Arnaldo Carvalho de Melo) - Add 'm' key for context menu display in the hists browser, that became inacessible with the repurposing of the right arrow key for horizontal scrolling. (Namhyung Kim) - Use debug_frame for callchains if eh_frame is unusable. (Rabin Vicent) Build fixes: - Fix strict-aliasing breakage with gcc 4.4 in the READ_ONCE/WRITE_ONCE code adopted from the kernel tree, that builds with -fno-strict-aliasing while tools/perf/ uses -Wstrict-aliasing=3. (Jiri Olsa) - Fix unw_word_t pointer casts in code using libunwind for callchains, fixing the build in at least 32-bit MIPS systems. (Rabin Vicent) - Work around cross compile build problems related to fixdep. (Jiri Olsa) Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
- 13 Oct, 2015 5 commits
-
-
Jiri Olsa authored
He Kuang the new fixdep tool breaks cross compiling. The reason is it wouldn't get compiled under host arch, but under cross arch and failed to run. We need to add support for host side tools build, meanwhile disabling fixdep usage for cross arch builds. Reported-by:
He Kuang <hekuang@huawei.com> Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/20151013124358.GB9467@krava.brq.redhat.comSigned-off-by:
-
Jiri Olsa authored
Vinson reported build breakage with gcc 4.4 due to strict-aliasing. CC util/annotate.o cc1: warnings being treated as errors util/annotate.c: In function ‘disasm__purge’: linux-next/tools/include/linux/compiler.h:66: error: dereferencing pointer ‘res.41’ does break strict-aliasing rules The reason is READ_ONCE/WRITE_ONCE code we took from kernel sources. They intentionaly break aliasing rules. While this is ok for kernel because it's built with -fno-strict-aliasing, it breaks perf which is build with -Wstrict-aliasing=3. Using extra __may_alias__ type to allow aliasing in this case. Reported-and-tested-by:
Vinson Lee <vlee@twopensource.com> Signed-off-by:
-
Namhyung Kim authored
With horizontal scrolling, the left/right arrow keys are used to scroll columns and ENTER/ESC keys are used to enter/exit menu. However if callchain is recorded, the ENTER key is used to toggle callchain expansion so there's no way to display menu. Use 'm' key to display the menu for this case. Signed-off-by:
-
Rabin Vincent authored
unw_word_t is uint64_t even on 32-bit MIPS. Cast it to uintptr_t before the cast to void *p to get rid of the following errors: util/unwind-libunwind.c: In function 'access_mem': util/unwind-libunwind.c:464:4: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] util/unwind-libunwind.c:475:2: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] cc1: all warnings being treated as errors make[3]: *** [util/unwind-libunwind.o] Error 1 Signed-off-by:
Rabin Vincent <rabin.vincent@axis.com> Acked-by:
-
Rabin Vincent authored
When NO_LIBUNWIND_DEBUG_FRAME=0, use the .debug_frame if the .eh_frame doesn't contain the approprate unwind tables. Signed-off-by:
-
- 12 Oct, 2015 3 commits
-
-
Arnaldo Carvalho de Melo authored
When in the hists browser, i.e. in 'perf report' or in 'perf top', it is possible to press '/' and specify a substring to filter by symbol name. Clarify how to remove a filter by making the prompt be: Please enter the name of symbol you want to see. To remove the filter later, press / + ENTER Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-vbq2b0kyufwy6p0ctkfswcoe@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
They were repurposed for horizontal scrolling, so use just ENTER/ESC in the help messages. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Fixes: c6c3c02d ("perf hists browser: Implement horizontal scrolling") Link: http://lkml.kernel.org/n/tip-n5ar4qg8fs12ax4vhr3rxhxj@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
Not as the first attempt at finding a vmlinux for the running kernel, this way we get a more informative filename to present in tools, it will check that the build-id is the same as the one previously loaded in the DSO in dso->build_id, reading from /sys/kernel/notes, for instance. E.g. in the annotation TUI, going from 'perf top', for the scsi_sg_alloc kernel function, in the first line: Before: scsi_sg_alloc /root/.debug/.build-id/28/2777c262e6b3c0451375163c9a81c893218ab1 After: scsi_sg_alloc /lib/modules/4.3.0-rc1+/build/vmlinux And: # ls -la /root/.debug/.build-id/28/2777c262e6b3c0451375163c9a81c893218ab1 lrwxrwxrwx. 1 root root 81 Sep 22 16:11 /root/.debug/.build-id/28/2777c262e6b3c0451375163c9a81c893218ab1 -> ../../home/git/build/v4.3.0-rc1+/vmlinux/282777c262e6b3c0451375163c9a81c893218ab1 # file ~/.debug/home/git/build/v4.3.0-rc1+/vmlinux/282777c262e6b3c0451375163c9a81c893218ab1 /root/.debug/home/git/build/v4.3.0-rc1+/vmlinux/282777c262e6b3c0451375163c9a81c893218ab1: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), statically linked, BuildID[sha1]=282777c262e6b3c0451375163c9a81c893218ab1, not stripped # The same as: # file /lib/modules/4.3.0-rc1+/build/vmlinux /lib/modules/4.3.0-rc1+/build/vmlinux: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), statically linked, BuildID[sha1]=282777c262e6b3c0451375163c9a81c893218ab1, not stripped Furthermore: # sha256sum /lib/modules/4.3.0-rc1+/build/vmlinux e7a789bbdc61029ec09140c228e1dd651271f38ef0b8416c0b7d5ff727b98be2 /lib/modules/4.3.0-rc1+/build/vmlinux # sha256sum ~/.debug/home/git/build/v4.3.0-rc1+/vmlinux/282777c262e6b3c0451375163c9a81c893218ab1 e7a789bbdc61029ec09140c228e1dd651271f38ef0b8416c0b7d5ff727b98be2 /root/.debug/home/git/build/v4.3.0-rc1+/vmlinux/282777c262e6b3c0451375163c9a81c893218ab1 [root@zoo new]# Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-9y42ikzq3jisiddoi6f07n8z@git.kernel.orgSigned-off-by:
-
- 08 Oct, 2015 2 commits
-
-
Ingo Molnar authored
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: User visible changes: - Adding a field via 'perf report -F' that already is enabled makes the tool get stuck in a loop, fix it. (Jiri Olsa) Infrastructure changes: - Support PERF_RECORD_SWITCH in the python binding. (Arnaldo Carvalho de Melo) - Fix handling read() result using a signed variable, found with Coccinelle. (Andrzej Hajda) Signed-off-by:
-
Ingo Molnar authored
Signed-off-by:
-
- 07 Oct, 2015 5 commits
-
-
Arnaldo Carvalho de Melo authored
To test it check tools/perf/python/twatch.py, after following the instructions there to enable context_switch, output looks like: [root@zoo linux]# tools/perf/python/twatch.py cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 } cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 0 } cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 1 } cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 0 } cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 1 } cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 1 } cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 } ^CTraceback (most recent call last): File "tools/perf/python/twatch.py", line 67, in <module> main(context_switch = 1, thread = 31463) File "tools/perf/python/twatch.py", line 40, in main evlist.poll(timeout = -1) KeyboardInterrupt [root@zoo linux]# Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Guy Streeter <streeter@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-1ukistmpamc5z717k80ctcp2@git.kernel.orgSigned-off-by: -
Ingo Molnar authored
Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fix from Arnaldo Carvalho de Melo: - Fix build break on (at least) powerpc due to sample_reg_masks, not being available for linking. (Sukadev Bhattiprolu) Signed-off-by:
-
Sukadev Bhattiprolu authored
perf_regs.c does not get built on Powerpc as CONFIG_PERF_REGS is false. So the weak definition for 'sample_regs_masks' doesn't get picked up. Adding perf_regs.o to util/Build unconditionally, exposes a redefinition error for 'perf_reg_value()' function (due to the static inline version in util/perf_regs.h). So use #ifdef HAVE_PERF_REGS_SUPPORT' around that function. Signed-off-by:
Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Acked-by:
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client bugfixes from Trond Myklebust: "Highlights include: Bugfixes: - Fix a use-after-free bug in the RPC/RDMA client - Fix a write performance regression - Fix up page writeback accounting - Don't try to reclaim unused state owners - Fix a NFSv4 nograce recovery hang - reset states to use open_stateid when returning delegation voluntarily - Fix a tracepoint NULL-pointer dereference" * tag 'nfs-for-4.3-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: Fix a tracepoint NULL-pointer dereference nfs4: reset states to use open_stateid when returning delegation voluntarily NFSv4: Fix a nograce recovery hang NFSv4.1: nfs4_opendata_check_deleg needs to handle NFS4_OPEN_CLAIM_DELEG_CUR_FH NFSv4: Don't try to reclaim unused state owners NFS: Fix a write performance regression NFS: Fix up page writeback accounting xprtrdma: disconnect and flush cqs before freeing buffers -
Linus Torvalds authored
This reverts commit 998ef75d. The commit itself does not appear to be buggy per se, but it is exposing a bug in ext4 (and Ted thinks ext3 too, but we solved that by getting rid of it). It's too late in the release cycle to really worry about this, even if Dave Hansen has a patch that may actually fix the underlying ext4 problem. We can (and should) revisit this for the next release. The problem is that moving the prefaulting later now exposes a special case with partially successful writes that isn't handled correctly. And the prefaulting likely isn't normally even that much of a performance issue - it looks like at least one reason Dave saw this in his performance tests is that he also ran them on Skylake that now supports the new SMAP code, which makes the normally very cheap user space prefaulting noticeably more expensive. Bisected-and-acked-by:
Ted Ts'o <tytso@mit.edu> Analyzed-and-acked-by:
Dave Hansen <dave.hansen@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 06 Oct, 2015 12 commits
-
-
Anna Schumaker authored
Running xfstest generic/013 with the tracepoint nfs:nfs4_open_file enabled produces a NULL-pointer dereference when calculating fileid and filehandle of the opened file. Fix this by checking if state is NULL before trying to use the inode pointer. Reported-by:
Olga Kornievskaia <aglo@umich.edu> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com>
-
Andrzej Hajda authored
The function can return negative value, assigning it to unsigned variable can cause memory corruption. The problem has been detected using proposed semantic patch scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci [1]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2038576Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: kernel-janitors@vger.kernel.org Link: http://lkml.kernel.org/r/1444122017-16856-1-git-send-email-a.hajda@samsung.comSigned-off-by:
-
Jiri Olsa authored
The perf_hpp__init currently does not respect sorting dimensions and the setup_sorting function could endup queueing same format twice. That screwed up the perf_hpp__list and got stuck in loop within perf_hpp__setup_output_field function. $ perf report -F +overhead 0x00000000004c1355 in perf_hpp__is_sort_entry (format=format@entry=0x880440 <perf_hpp.format>) at util/sort.c:1506 1506 { #0 0x00000000004c1355 in perf_hpp__is_sort_entry (format=format@entry=0x880440 <perf_hpp.format>) at util/sort.c:1506 #1 0x00000000004c139d in perf_hpp__same_sort_entry (a=a@entry=0x880440 <perf_hpp.format>, b=b@entry=0x2bb2fe0) at util/sort.c:1380 #2 0x00000000004f8d3c in perf_hpp__setup_output_field () at ui/hist.c:554 #3 0x00000000004c1d1e in setup_sorting () at util/sort.c:1984 #4 0x000000000042efbf in cmd_report (argc=0, argv=0x7ffea5a0e790, prefix=<optimized out>) at builtin-report.c:874 #5 0x0000000000476f13 in run_builtin (p=p@entry=0x875628 <commands+168>, argc=argc@entry=3, argv=argv@entry=0x7ffea5a0e790) at perf.c:385 #6 0x000000000047710b in handle_internal_command (argc=3, argv=0x7ffea5a0e790) at perf.c:445 #7 0x0000000000477176 in run_argv (argcp=argcp@entry=0x7ffea5a0e5fc, argv=argv@entry=0x7ffea5a0e5f0) at perf.c:489 #8 0x00000000004773e7 in main (argc=3, argv=0x7ffea5a0e790) at perf.c:606 Using hpp_dimension__add_output function to register the output column. It will also mark the dimension as taken and omit above stuck. Reported-by: -
Jiri Olsa authored
This function will allow to register output column from ui code and respect taken sort/output dimensions. Signed-off-by:
-
Jiri Olsa authored
There's no need to call reset_dimensions within __setup_output_field function. It's already called in its caller setup_sorting right before perf_hpp__init, which will be changed in following patch to respect taken dimension. Signed-off-by:
-
Taku Izumi authored
In multi-segment system, uncore devices may belong to buses whose segment number is other than 0: .... 0000:ff:10.5 System peripheral: Intel Corporation Xeon E5 v3/Core i7 Scratchpad & Semaphore Registers (rev 03) ... 0001:7f:10.5 System peripheral: Intel Corporation Xeon E5 v3/Core i7 Scratchpad & Semaphore Registers (rev 03) ... 0001:bf:10.5 System peripheral: Intel Corporation Xeon E5 v3/Core i7 Scratchpad & Semaphore Registers (rev 03) ... 0001:ff:10.5 System peripheral: Intel Corporation Xeon E5 v3/Core i7 Scratchpad & Semaphore Registers (rev 03 ... In that case, relation of bus number and physical id may be broken because "uncore_pcibus_to_physid" doesn't take account of PCI segment. For example, bus 0000:ff and 0001:ff uses the same entry of "uncore_pcibus_to_physid" array. This patch fixes this problem by introducing the segment-aware pci2phy_map instead. Signed-off-by:
Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@kernel.org Cc: hpa@zytor.com Link: http://lkml.kernel.org/r/1443096621-4119-1-git-send-email-izumi.taku@jp.fujitsu.comSigned-off-by:
-
Kan Liang authored
This patch adds new PMUs to support cstate related free running (read-only) counters. These counters may be used simultaneously by other tools, such as turbostat. However, it still make sense to implement them in perf. Because we can conveniently collect them together with other events, and allow to use them from tools without special MSR access code. These counters include CORE_C*_RESIDENCY and PKG_C*_RESIDENCY. According to counters' scope and category, two PMUs are registered with the perf_event core subsystem. - 'cstate_core': The counter is available for each physical core. The counters include CORE_C*_RESIDENCY. - 'cstate_pkg': The counter is available for each physical package. The counters include PKG_C*_RESIDENCY. The events are exposed in sysfs for use by perf stat and other tools. The files are: /sys/devices/cstate_core/events/c*-residency /sys/devices/cstate_pkg/events/c*-residency These events only support system-wide mode counting. The /sys/devices/cstate_*/cpumask file can be used by tools to figure out which CPUs to monitor by default. The PMU type (attr->type) is dynamically allocated and is available from /sys/devices/core_misc/type and /sys/device/cstate_*/type. Sampling is not supported. Here is an example. - To caculate the fraction of time when the core is running in C6 state CORE_C6_time% = CORE_C6_RESIDENCY / TSC # perf stat -x, -e"cstate_core/c6-residency/,msr/tsc/" -C0 -- taskset -c 0 sleep 5 11838820015,,cstate_core/c6-residency/,5175919658,100.00 11877130740,,msr/tsc/,5175922010,100.00 For sleep, 99.7% of time we ran in C6 state. # perf stat -x, -e"cstate_core/c6-residency/,msr/tsc/" -C0 -- taskset -c 0 busyloop 1253316,,cstate_core/c6-residency/,4360969154,100.00 10012635248,,msr/tsc/,4360972366,100.00 For busyloop, 0.01% of time we ran in C6 state. Signed-off-by:Kan Liang <kan.liang@intel.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen bug fixes from David Vrabel: - Fix VM save performance regression with x86 PV guests - Make kexec work in x86 PVHVM guests (if Xen has the soft-reset ABI) - Other minor fixes. * tag 'for-linus-4.3b-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: x86/xen/p2m: hint at the last populated P2M entry x86/xen: Do not clip xen_e820_map to xen_e820_map_entries when sanitizing map x86/xen: Support kexec/kdump in HVM guests by doing a soft reset xen/x86: Don't try to write syscall-related MSRs for PV guests xen: use correct type for HYPERVISOR_memory_op()
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes from Martin Schwidefsky: "Three bug fixes and an update to the default configuration" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/defconfig: set SCSI_DH=y s390/vtime: correct scaled cputime of partially idle CPUs s390/boot/decompression: disable floating point in decompressor s390/numa: use correct type for node_to_cpumask_map
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull CIFS fixes from Steve French: "Two fixes for problems pointed out by automated tools. Thanks PaX/grsecurity team and Dan Carpenter (and the Smatch tool)" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: [CIFS] Update cifs version number [SMB3] Do not fall back to SMBWriteX in set_file_size error cases [SMB3] Missing null tcon check
-
David Vrabel authored
With commit 633d6f17 (x86/xen: prepare p2m list for memory hotplug) the P2M may be sized to accomdate a much larger amount of memory than the domain currently has. When saving a domain, the toolstack must scan all the P2M looking for populated pages. This results in a performance regression due to the unnecessary scanning. Instead of reporting (via shared_info) the maximum possible size of the P2M, hint at the last PFN which might be populated. This hint is increased as new leaves are added to the P2M (in the expectation that they will be used for populated entries). Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Cc: <stable@vger.kernel.org> # 4.0+
-
Ingo Molnar authored
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: User visible changes: - Switch the default callchain output mode to 'graph,0.5,caller', to make it look like the default for other tools, reducing the learning curve for people used to 'caller' based viewing. (Arnaldo Carvalho de Melo) - Implement column based horizontal scrolling in the hists browser (top, report), making it possible to use the TUI for things like 'perf mem report' where there are many more columns than can fit in a terminal. (Arnaldo Carvalho de Melo) - Support sorting by symbol_iaddr with perf.data files produced by 'perf mem record'. (Don Zickus) - Display DATA_SRC sample type bit, i.e. when running 'perf evlist -v' the "DATA_SRC" wasn't appearing when set, fix it to look like: (Jiri Olsa) cpu/mem-loads/pp: ...SNIP... sample_type: IP|TID|TIME|ADDR|CPU|PERIOD|DATA_SRC - Introduce the 'P' event modifier, meaning 'max precision level, please', i.e.: $ perf record -e cycles:P usleep 1 Is now similar to: $ perf record usleep 1 Useful, for instance, when specifying multiple events. (Jiri Olsa) - Make 'perf -v' and 'perf -h' work. (Jiri Olsa) - Fail properly when pattern matching fails to find a tracepoint, i.e. '-e non:existent' was being correctly handled, with a proper error message about that not being a valid event, but '-e non:existent*' wasn't, fix it. (Jiri Olsa) Infrastructure changes: - Separate arch specific entries in 'perf test' and add an 'Intel CQM' one to be fun on x86 only. (Matt Fleming) Signed-off-by:
-
- 05 Oct, 2015 10 commits
-
-
Jiri Olsa authored
Currently we dont fail properly when pattern matching fails to find any tracepoint. Current behaviour: $ perf record -e 'sched:krava*' sleep 1 WARNING: event parser found nothinginvalid or unsupported event: 'sched:krava*' Run 'perf list' for a list of valid events usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] This patch change: $ perf record -e 'sched:krava*' sleep 1 event syntax error: 'sched:krava*' \___ unknown tracepoint Error: File /sys/kernel/debug/tracing/events/sched/krava* not found. Hint: Perhaps this kernel misses some CONFIG_ setting to enable this feature?. Run 'perf list' for a list of valid events usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] Reported-by:Daniel Bristot de Oliveira <bristot@redhat.com> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Do it using the recently introduced ui_brower scrolling mode, setting ui_browser.columns to the number of sort columns and then, when rendering each line, skipping as many initial columns as the user pressed the right arrow. As the user presses the left arrow, the ui_browser code will remove the scrolling counter and the left scrolling takes place. The right arrow key was an alias for ENTER, so people used to press it may get a bit annoyed at first, sorry! Ditto for ESC and the left key. Callchains can be left as is or we can, when rendering the Symbol column, store the at what position on the screen it is and then using ui_browser__gotorc() to print it from there, i.e. the callchain would move around with the symbol. Leaving it as is, i.e. at a fixed position, close to the left, saves precious screen real state for it, so I'm inclined to leave it as is now. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Chandler Carruth <chandlerc@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-ccqq9sabgfge5dwbqjwh71ij@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
If the classes derived from ui_browser want to do some sort of horizontal scrolling, they have just to set ui_browser->columns to the number of columns available. Those columns can be the number of characters on the screen, if what is desired is to scroll character by character, or the number of columns in a spreadsheet like table. This is what the hist_browser will do, skipping ui_browser->horiz_scroll columns when rendering each of its lines. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-q6a22bpmpgcr1awgzrmd4jrs@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
Which is the most common default found in other similar tools. Requested-by:
-
Matt Fleming authored
Peter reports that it's possible to trigger a WARN_ON_ONCE() in the Intel CQM code by combining a hardware event and an Intel CQM (software) event into a group. Unfortunately, the perf tools are not able to create this bundle and we need to manually construct a test case. For posterity, record Peter's proof of concept test case in tools/perf so that it presents a model for how we can perform architecture specific tests, or "arch tests", in perf in the future. The particular issue triggered in the test case is that when the counter for the hardware event overflows and triggers a PMI we'll read both the hardware event and the software event counters. Unfortunately, for CQM that involves performing an IPI to read the CQM event counters on all sockets, which in NMI context triggers the WARN_ON_ONCE(). Reported-by:
Matt Fleming <matt.fleming@intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kanaka Juvva <kanaka.d.juvva@intel.com> Cc: Vikas Shivappa <vikas.shivappa@intel.com> Cc: Vince Weaver <vince@deater.net> Link: http://lkml.kernel.org/r/1437490509-15373-1-git-send-email-matt@codeblueprint.co.uk Link: http://lkml.kernel.org/n/tip-3p4ra0u8vzm7m289a1m799kf@git.kernel.orgSigned-off-by:
-
Matt Fleming authored
Move out the x86-specific tests into tools/perf/arch/x86/tests and define an 'arch_tests' array, which is the list of tests that only apply to the build architecture. We can also now begin to get rid of some of the #ifdef code that is present in the generic perf tests. Signed-off-by:
-
Matt Fleming authored
Tests that only make sense for some architectures currently live in the same place as the generic tests. Move out the x86-specific tests into tools/perf/arch/x86/tests and define an 'arch_tests' array, which is the list of tests that only apply to the build architecture. The main idea is to encourage developers to add arch tests to build out perf's test coverage, without dumping everything in tools/perf/tests. Signed-off-by:
-
Jiri Olsa authored
Adding handling for '-h' and '-v' options to invoke help and version command respectively. Current behaviour is: $ perf -v Unknown option: -v Usage: perf [--version] [--help] [OPTIONS] COMMAND [ARGS] $ perf -h Unknown option: -h Usage: perf [--version] [--help] [OPTIONS] COMMAND [ARGS] New behaviour: $ perf -h usage: perf [--version] [--help] [OPTIONS] COMMAND [ARGS] The most commonly used perf commands are: annotate Read perf.data (created by perf record) and display annotated code archive Create archive with object files with build-ids found in perf.data file bench General framework for benchmark suites ... $ perf -v perf version 4.3.rc3.gc99e32 Updated man page. Requested-by: -
Jiri Olsa authored
We need to properly initialize column width for symbol_iaddr field, so all symbols could fit in the column. Signed-off-by:
-
Don Zickus authored
Sorting on 'symbol' gives to broad a resolution as it can cover a range of IP address. Use the iaddr instead to get proper sorting on IP addresses. Need to use the 'mem_sort' feature of perf record. New sort option is: symbol_iaddr, header label is 'Code Symbol'. $ perf mem report --stdio -F +symbol_iaddr # Overhead Samples Code Symbol Local Weight # ........ ............ ........................ ............ # 54.08% 1 [k] nmi_handle 192 4.51% 1 [k] finish_task_switch 16 3.66% 1 [.] malloc 13 3.10% 1 [.] __strcoll_l 11 Signed-off-by:Don Zickus <dzickus@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1444068369-20978-8-git-send-email-jolsa@kernel.orgSigned-off-by:
-
