- 11 Jun, 2023 1 commit
-
-
Vladimir Nikishkin authored
The iproute2 output that eventually landed upstream is different than the one used in this test, resulting in failures. Fix by adjusting the test to use iproute2's JSON output, which is more stable than regular output. Fixes: 305c0418 ("selftests: net: vxlan: Add tests for vxlan nolocalbypass option.") Signed-off-by:
Vladimir Nikishkin <vladimir@nikishkin.pw> Reviewed-by:
Ido Schimmel <idosch@nvidia.com> Tested-by:
David S. Miller <davem@davemloft.net>
-
- 10 Jun, 2023 17 commits
-
-
David S. Miller authored
Yoshihiro Shimoda says: ==================== net: renesas: rswitch: Improve perfromance of TX/RX This patch series is based on net-next.git / main branch [1]. This patch series can improve perfromance of TX in a specific condition. The previous code used "global rate limiter" feature so that this is possible to cause performance down if we use multiple ports at the same time. To resolve this issue, use "hardware pause" features of GWCA and COMA. Note that this is not related to the ethernet PAUSE frames. < UDP TX by iperf3 > before: about 450Mbps on both tsn0 and tsn1 after: about 950Mbps on both tsn0 and tsn1 Also, this patch series can improve performance of RX by using napi_gro_receive(). < TCP RX by iperf > before: about 670Mbps on tsn0 after: about 840Mbps on tsn0 [1] The commit e06bd5e3 ("Merge branch 'followup-fixes-for-the-dwmac-and-altera-lynx-conversion'") Changes from v3: https://lore.kernel.org/all/20230607015641.1724057-1-yoshihiro.shimoda.uh@renesas.com/ - Rebased on the latest net-next.git / main branch. - Added Reviewed-by in the patch 2/2. (Maciej, thanks!) - Fix typos in the commit description in the patch 2/2. Changes from v2: https://lore.kernel.org/all/20230606085558.1708766-1-yoshihiro.shimoda.uh@renesas.com/ - Rebased on the latest net-next.git / main branch. - Added Reviewed-by in the patch 1/2. (Maciej, thanks!) - Revise the commit description in the patch 2/2. - Add definition to remove magic hardcoded numbers in the patch 2/2. Changes from v1: https://lore.kernel.org/all/20230529080840.1156458-1-yoshihiro.shimoda.uh@renesas.com/ - Rebased on the latest net-next.git / main branch. - Use "hardware pause" feature instead of "per-queue limiter" feature. - Drop refactaring for "per-queue limiter". - Drop dt-bindings update because "hardware pause" doesn't need additional clock information. - Use napi_gro_receive() to improve RX performance. ==================== Signed-off-by:
-
Yoshihiro Shimoda authored
Since this driver used the "global rate limiter" feature of GWCA, the TX performance of each port was reduced when multiple ports transmitted frames simultaneously. To improve performance, remove the use of the "global rate limiter" feature and use "hardware pause" features of the following: - "per priority pause" of GWCA - "global pause" of COMA Note that these features are not related to the ethernet PAUSE frame. Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by:
Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by:
-
Yoshihiro Shimoda authored
This hardware can receive multiple frames so that using napi_gro_receive() instead of netif_receive_skb() gets good performance of RX. Signed-off-by:
-
Jakub Kicinski authored
Edward Cree says: ==================== sfc: TC encap actions offload This series adds support for offloading TC tunnel_key set actions to the EF100 driver, supporting VxLAN and GENEVE tunnels over IPv4 or IPv6. ==================== Link: https://lore.kernel.org/r/cover.1686240142.git.ecree.xilinx@gmail.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Edward Cree authored
Support constructing VxLAN and GENEVE headers, on either IPv4 or IPv6, using the neighbouring information obtained in encap->neigh to populate the Ethernet header. Note that the ef100 hardware does not insert UDP checksums when performing encap, so for IPv6 the remote endpoint will need to be configured with udp6zerocsumrx or equivalent. Signed-off-by:
Edward Cree <ecree.xilinx@gmail.com> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Reviewed-by:
Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com> Signed-off-by:
-
Edward Cree authored
For each neighbour we're interested in, create a struct efx_neigh_binder object which has a list of all the encap_actions using it. When we receive a neighbouring update (through the netevent notifier), find the corresponding efx_neigh_binder and update all its users. Since the actual generation of encap headers is still only a stub, the resulting rules still get left on fallback actions. Signed-off-by:
-
Edward Cree authored
Besides the raw header data, also pass the tunnel type, so that the hardware knows it needs to update the IP Total Length and UDP Length fields (and corresponding checksums) for each packet. Also, populate the ENCAP_HEADER_ID field in efx_mae_alloc_action_set() with the fw_id returned from efx_mae_allocate_encap_md(). Reviewed-by:
-
Edward Cree authored
efx_mae_update_rule() changes the action-set-list attached to an MAE flow rule in the Action Rule Table. We will use this when neighbouring updates change encap actions. Reviewed-by:
-
Edward Cree authored
Create software objects to manage the metadata for encap actions that can be attached to TC rules. However, since we don't yet have the neighbouring information (needed to generate the Ethernet header), all rules with encap actions are marked as "unready" and thus insert the fallback action into hardware rather than actually offloading the encapsulation action. Reviewed-by:
-
Edward Cree authored
When offloading a TC encap action, the action information for the hardware might not be "ready": if there's currently no neighbour entry available for the destination address, we can't construct the Ethernet header to prepend to the packet. In this case, we still offload the flow rule, but with its action-set-list ID pointing at a "fallback" action which simply delivers the packet to its default destination (as though no flow rule had matched), thus allowing software TC to handle it. Later, when we receive a neighbouring update that allows us to construct the encap header, the rule will become "ready" and we will update its action-set-list ID in hardware to point at the actual offloaded actions. This patch sets up these fallback ASLs, but does not yet use them. Reviewed-by:
-
Eric Dumazet authored
Move declarations into include/net/gso.h and code into net/core/gso.c Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Stanislav Fomichev <sdf@google.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20230608191738.3947077-1-edumazet@google.comSigned-off-by:
-
Jakub Kicinski authored
Matthieu Baerts says: ==================== mptcp: unify PM interfaces These patches from Geliang better isolate the two MPTCP path-managers by avoiding calling userspace PM functions from the in-kernel PM. Instead, new functions declared in pm.c directly dispatch to the right PM. In addition to have a clearer code, this also avoids a bit of duplicated checks. This is a refactoring, there is no behaviour change intended here. ==================== Link: https://lore.kernel.org/r/20230608-upstream-net-next-20230608-mptcp-unify-pm-interfaces-v1-0-b301717c9ff5@tessares.netSigned-off-by:
-
Geliang Tang authored
This patch unifies the three PM set_flags() interfaces: mptcp_pm_nl_set_flags() in mptcp/pm_netlink.c for the in-kernel PM and mptcp_userspace_pm_set_flags() in mptcp/pm_userspace.c for the userspace PM. They'll be switched in the common PM infterface mptcp_pm_set_flags() in mptcp/pm.c based on whether token is NULL or not. Signed-off-by:
Geliang Tang <geliang.tang@suse.com> Reviewed-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
Larysa Zaremba <larysa.zaremba@intel.com> Signed-off-by:
-
Geliang Tang authored
This patch unifies the three PM get_flags_and_ifindex_by_id() interfaces: mptcp_pm_nl_get_flags_and_ifindex_by_id() in mptcp/pm_netlink.c for the in-kernel PM and mptcp_userspace_pm_get_flags_and_ifindex_by_id() in mptcp/pm_userspace.c for the userspace PM. They'll be switched in the common PM infterface mptcp_pm_get_flags_and_ifindex_by_id() in mptcp/pm.c based on whether mptcp_pm_is_userspace() or not. Signed-off-by:
-
Geliang Tang authored
This patch unifies the three PM get_local_id() interfaces: mptcp_pm_nl_get_local_id() in mptcp/pm_netlink.c for the in-kernel PM and mptcp_userspace_pm_get_local_id() in mptcp/pm_userspace.c for the userspace PM. They'll be switched in the common PM infterface mptcp_pm_get_local_id() in mptcp/pm.c based on whether mptcp_pm_is_userspace() or not. Also put together the declarations of these three functions in protocol.h. Signed-off-by:
-
Geliang Tang authored
Rename local_address() with "mptcp_" prefix and export it in protocol.h. This function will be re-used in the common PM code (pm.c) in the following commit. Signed-off-by:
-
Jakub Kicinski authored
Merge tag 'wireless-next-2023-06-09' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.5 The second pull request for v6.5. We have support for three new Realtek chipsets, all from different generations. Shows how active Realtek development is right now, even older generations are being worked on. Note: We merged wireless into wireless-next to avoid complex conflicts between the trees. Major changes: rtl8xxxu - RTL8192FU support rtw89 - RTL8851BE support rtw88 - RTL8723DS support ath11k - Multiple Basic Service Set Identifier (MBSSID) and Enhanced MBSSID Advertisement (EMA) support in AP mode iwlwifi - support for segmented PNVM images and power tables - new vendor entries for PPAG (platform antenna gain) feature cfg80211/mac80211 - more Multi-Link Operation (MLO) support such as hardware restart - fixes for a potential work/mutex deadlock and with it beginnings of the previously discussed locking simplifications * tag 'wireless-next-2023-06-09' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (162 commits) wifi: rtlwifi: remove misused flag from HAL data wifi: rtlwifi: remove unused dualmac control leftovers wifi: rtlwifi: remove unused timer and related code wifi: rsi: Do not set MMC_PM_KEEP_POWER in shutdown wifi: rsi: Do not configure WoWlan in shutdown hook if not enabled wifi: brcmfmac: Detect corner error case earlier with log wifi: rtw89: 8852c: update RF radio A/B parameters to R63 wifi: rtw89: 8852c: update TX power tables to R63 with 6 GHz power type (3 of 3) wifi: rtw89: 8852c: update TX power tables to R63 with 6 GHz power type (2 of 3) wifi: rtw89: 8852c: update TX power tables to R63 with 6 GHz power type (1 of 3) wifi: rtw89: process regulatory for 6 GHz power type wifi: rtw89: regd: update regulatory map to R64-R40 wifi: rtw89: regd: judge 6 GHz according to chip and BIOS wifi: rtw89: refine clearing supported bands to check 2/5 GHz first wifi: rtw89: 8851b: configure CRASH_TRIGGER feature for 8851B wifi: rtw89: set TX power without precondition during setting channel wifi: rtw89: debug: txpwr table access only valid page according to chip wifi: rtw89: 8851b: enable hw_scan support wifi: cfg80211: move scan done work to wiphy work wifi: cfg80211: move sched scan stop to wiphy work ... ==================== Link: https://lore.kernel.org/r/87bkhohkbg.fsf@kernel.orgSigned-off-by:
-
- 09 Jun, 2023 22 commits
-
-
Jakub Kicinski authored
Jakub Kicinski says: ==================== tools: ynl-gen: code gen improvements before ethtool I was going to post ethtool but I couldn't stand the ugliness of the if conditions which were previously generated. So I cleaned that up and improved a number of other things ethtool will benefit from. ==================== Link: https://lore.kernel.org/r/20230608211200.1247213-1-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Kernel does not have padding requirements for 64b attrs. We can ignore pad attrs. Signed-off-by: -
Jakub Kicinski authored
The op_name argument is barely used and identical to op.name in all cases. Signed-off-by: -
Jakub Kicinski authored
Netlink specs support both events and notifications (former can define their own message contents). Plug in missing code to generate types, parsers and include events into notification tables. Signed-off-by: -
Jakub Kicinski authored
Don't modify the raw dicts (as loaded from YAML) to pretend that the notify attributes also exist on the ops. This makes the code easier to follow. Signed-off-by: -
Jakub Kicinski authored
Remove unused notification handlers. Signed-off-by: -
Jakub Kicinski authored
Common notification handler was supposed to be a way for the user to parse the notifications from a socket synchronously. I don't think we'll end up using it, ynl_ntf_check() works for all known use cases. Signed-off-by: -
Jakub Kicinski authored
Renegate the code to combine } and else and use tmp variable to store type. Signed-off-by: -
Jakub Kicinski authored
Reading attr type with mnl_attr_get_type() for each condition leads to most conditions being longer than 80 chars. Avoid this by reading the type to a variable on the stack. Signed-off-by: -
Jakub Kicinski authored
Code gen currently prints: } else if (... This is really ugly. Fix it by delaying printing of closing brackets in anticipation of else coming along. Signed-off-by: -
Jakub Kicinski authored
C keywords need to be avoided when naming things. Complete the list (ethtool has at least one thing called "auto"). Signed-off-by: -
Jakub Kicinski authored
Remove unnecessary includes. Signed-off-by: -
Jakub Kicinski authored
Bots started screaming that we're including stdlib.h twice. While at it move string.h into a common spot and drop stdio.h which we don't need. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5464 Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5466 Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5467Signed-off-by:
-
Jakub Kicinski authored
This reverts commit e7c5433c. Commit e7c5433c ("tools: ynl: Remove duplicated include in handshake-user.c") was applied too hastily. It changes an auto-generated file, and there's already a proper fix on the list. Link: https://lore.kernel.org/all/ZIMPLYi%2FxRih+DlC@nanopsycho/Signed-off-by:
-
Yang Li authored
./tools/net/ynl/generated/handshake-user.c: stdlib.h is included more than once. Reported-by:
Yang Li <yang.lee@linux.alibaba.com> Signed-off-by:
-
David S. Miller authored
Florian Fainelli says: ==================== LED brightness support for Broadcom PHYs This patch series adds support for controlling the LED brightness on Broadcom PHYs. ==================== Signed-off-by: -
Florian Fainelli authored
Broadcom PHYs have two LEDs selector registers which allow us to control the LED assignment, including how to turn them on/off. Signed-off-by:
Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by:
-
Florian Fainelli authored
These registers are common to most PHYs and are not specific to the BCM5482, renamed the constants accordingly, no functional change. Signed-off-by:
-
David S. Miller authored
Ivan Mikhaylov says: ==================== net/ncsi: refactoring for GMA command Make one GMA function for all manufacturers, change ndo_set_mac_address to dev_set_mac_address for notifiying net layer about MAC change which ndo_set_mac_address doesn't do. Changes from v1: 1. delete ftgmac100.txt changes about mac-address-increment 2. add convert to yaml from ftgmac100.txt 3. add mac-address-increment option for ethernet-controller.yaml Changes from v2: 1. remove DT changes from series, will be done in another one ==================== Signed-off-by: -
Ivan Mikhaylov authored
Change ndo_set_mac_address to dev_set_mac_address because dev_set_mac_address provides a way to notify network layer about MAC change. In other case, services may not aware about MAC change and keep using old one which set from network adapter driver. As example, DHCP client from systemd do not update MAC address without notification from net subsystem which leads to the problem with acquiring the right address from DHCP server. Fixes: cb10c7c0 ("net/ncsi: Add NCSI Broadcom OEM command") Cc: stable@vger.kernel.org # v6.0+ 2f38e84 net/ncsi: make one oem_gma function for all mfr id Signed-off-by:
Paul Fertser <fercerpav@gmail.com> Signed-off-by:
Ivan Mikhaylov <fr0st61te@gmail.com> Reviewed-by:
-
Ivan Mikhaylov authored
Make the one Get Mac Address function for all manufacturers and change this call in handlers accordingly. Reviewed-by:
-
Foster Snowhill authored
This module has for a long time not been limited to iPhone <= 3GS. Update description to match the actual state of the driver. Remove dead link from 2010, instead reference an existing userspace iOS device pairing implementation as part of libimobiledevice. Signed-off-by:
Foster Snowhill <forst@pen.gy> Signed-off-by:
-
