Continue with the driver rewrite:

- move the interrupt twiddling code from the speedproc handlers into the
    init_hwif_hpt366 which allows to merge the two HPT37x speedproc handlers
    into one;

- get rid of in init_hpt366 which solely consists of the duplicate code, then
    fold init_hpt37x() into init_chipset_hpt366();

- fix hpt3xx_tune_drive() to always set the PIO mode requested, not the best
    possible one, change hpt366_config_drive_xfer_rate() accordingly, simplify
    it a bit;

- group all the DMA related code together init_hwif_hpt366(), and generally
    clean up and beautify it.
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Begin the real driver redesign. For the starters:

- cache the offset of the IDE channel's MISC. control registers which are used
   throughout the driver in hwif->select_data;

- only touch the relevant MCR when detecting the cable type on HPT374's
   function 1;

- make HPT36x's speedproc handler look the same way as HPT37x ones; fix the
   PIO timing register mask for HPT37x.

- rename all the HPT3xx register related variables consistently; clean up the
   whitespace.
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Switch to using pci_get_slot() to get to the function 1 of HPT36x/374 chips --
there's no need for the driver itself to walk the list of the PCI devices, and
it also forgets to check the bus number of the device found.
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

- Rework the driver setup code so that it prefixes the driver startup
  messages with the real chip name.

- Print the measured f_CNT value and the DPLL setting for non-HPT3xx
  chips as well.

- Claim the extra 240 bytes of I/O space for all chips, not only for
  those having PCI device ID of 0x0004.
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

- Rework hpt3xx_ratemask() and hpt3xx_ratefilter() so that the former
  returns the max.  mode computed at the load time and doesn't have to do
  bad Ultra33 drive list lookups anymore; remove the duplicate code from
  the latter function.  Move the quirky drive list lookup into
  hpt3xx_quirkproc() where it should have been from the start...

- Disable UltraATA/100 for HPT370 by default as the 33 MHz ATA clock
  being used does not allow for it, and this *greatly* increases the
  transfer speed.

- Save some space by using byte-wide fields in struct hpt_info; switch to
  reading the 8-bit PCI revision ID reg.  only, not the whole 32-bit reg.

- Start incrementing the driver version number with each patch (should
  have been done from the first one posted).
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: (27 commits)
  [IA64] swiotlb abstraction (e.g. for Xen)
  [IA64] swiotlb cleanup
  [IA64] make swiotlb use bus_to_virt/virt_to_bus
  [IA64] swiotlb bug fixes
  [IA64] Hook up getcpu system call for IA64
  [IA64] clean up sparsemem memory_present call
  [IA64] show_mem() for IA64 sparsemem NUMA
  [IA64] missing exports hwsw_sync_...
  [IA64] virt_to_page() can be called with NULL arg
  [IA64] alignment bug in ldscript
  [IA64] register memory ranges in a consistent manner
  [IA64] Enable SWIOTLB only when needed
  [IA64-SGI] Check for TIO errors on shub2 Altix
  [IA64] remove bogus prototype ia64_esi_init()
  [IA64] Clear IRQ affinity when unregistered
  [IA64] fix ACPI Kconfig issues
  [IA64] Fix NULL-pointer dereference in ia64_machine_kexec()
  [IA64] find thread for user rbs address
  [IA64] use snprintf() on features field of /proc/cpuinfo
  [IA64] enable singlestep on system call
  ...

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
  ocfs2: ocfs2_link() journal credits update

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid:
  USB HID: handle multi-interface devices for Apple macbook pro properly
  HID: move away from DEBUG defines in favor of CONFIG_HID_DEBUG
  USB HID: fix bogus comment in hid_get_class_descriptor()
  USB HID: remove hid_find_field_by_usage()
  HID: API - fix leftovers of hidinput API in USB HID
  HID: hid debug from hid-debug.h to hid layer
  hid: force feedback driver for PantherLord USB/PS2 2in1 Adapter
  hid: quirk for multi-input devices with unneeded output reports
  hid: allow force feedback for multi-input devices

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband:
  IB/ehca: Remove obsolete prototypes
  IB/ehca: Remove use of do_mmap()
  RDMA/addr: Handle ethernet neighbour updates during route resolution
  IB: Make sure struct ib_user_mad.data is aligned
  IB/srp: Don't wait for response when QP is in error state.
  IB: Return qp pointer as part of ib_wc
  IB: Include <linux/kref.h> explicitly in <rdma/ib_verbs.h>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: (32 commits)
  mmc: tifm: replace kmap with page_address
  mmc: sdhci: fix voltage ocr
  mmc: sdhci: replace kmap with page_address
  mmc: wbsd: replace kmap with page_address
  mmc: handle pci_enable_device() return value in sdhci
  mmc: Proper unclaim in mmc_block
  mmc: change wbsd mailing list
  mmc: Graceful fallback for fancy features
  mmc: Handle wbsd's stupid command list
  mmc: Allow host drivers to specify max block count
  mmc: Allow host drivers to specify a max block size
  tifm_sd: add suspend and resume functionality
  tifm_core: add suspend/resume infrastructure for tifm devices
  tifm_7xx1: prettify
  tifm_7xx1: recognize device 0xac8f as supported
  tifm_7xx1: switch from workqueue to kthread
  tifm_7xx1: Merge media insert and media remove functions
  tifm_7xx1: simplify eject function
  Add dummy_signal_irq function to save check in ISR
  Remove unused return value from signal_irq callback
  ...

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: (37 commits)
  [S390] Avoid excessive inlining.
  [S390] Mark kernel text section read-only.
  [S390] Convert memory detection into C code.
  [S390] Calibrate delay and bogomips.
  [S390] Hypervisor filesystem (s390_hypfs) for z/VM
  [S390] Add crypto support for 3592 tape devices
  [S390] boot from NSS support
  [S390] Support for s390 Pseudo Random Number Generator
  [S390] ETR support.
  [S390] noexec protection
  [S390] move crypto options and some cleanup.
  [S390] cio: Don't spam debug feature.
  [S390] Cleanup of CHSC event handling.
  [S390] cio: declare hardware structures packed.
  [S390] Add set_fs(USER_DS) to start_thread().
  [S390] cio: Catch operand exceptions on stsch.
  [S390] Fix register usage description.
  [S390] kretprobe_trampoline_holder() in wrong section.
  [S390] Fix kprobes breakpoint handling.
  [S390] Update maintainers file.
  ...

Fix the key serial number collision avoidance code in key_alloc_serial().

This didn't use to be so much of a problem as the key serial numbers were
allocated from a simple incremental counter, and it would have to go through
two billion keys before it could possibly encounter a collision.  However, now
that random numbers are used instead, collisions are much more likely.

This is fixed by finding a hole in the rbtree where the next unused serial
number ought to be and using that by going almost back to the top of the
insertion routine and redoing the insertion with the new serial number rather
than trying to be clever and attempting to work out the insertion point
pointer directly.

This fixes kernel BZ #7727.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] Minor cleanup
  [CIFS] Missing free in error path
  [CIFS] Reduce cifs stack space usage
  [CIFS] lseek polling returned stale EOF

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (40 commits)
  [MIPS] Yosemite: Fix missing parens in SERIAL_READ_1 macro
  [MIPS] Fix warnings in run_uncached on 32bit kernel
  [MIPS] Comment fix
  [MIPS] MT: Nuke duplicate mips_mt_regdump() prototype.
  [MIPS] Alchemy:  Fix PCI-memory access
  [MIPS] Move .set reorder out of conditional code
  [MIPS] Check FCSR for pending interrupts before restoring from a context.
  [MIPS] Jaguar ATX: Fix large number of warnings.
  [MIPS] Jaguar: Fix MAC address detection after platform_device conversion.
  [MIPS] SMTC: Make a bunch of functions and variables static.
  [MIPS] Use compat_sys_pselect6
  [MIPS] SMTC: Cleanup idle hook invocation.
  [MIPS] SELinux: Add security hooks to mips-mt {get,set}affinity
  [MIPS] IRIX: Linux coding style cleanups.
  [MIPS] PB1100: Fix pile of warnings
  [MIPS] Alchemy: Fix bunch of warnings
  [MIPS] Whitespace cleanups.
  [MIPS] Alchemy: Fix bunch more warnings.
  [MIPS] Use ARRAY_SIZE macro when appropriate
  [MIPS] Fix some whitespace damage
  ...

 Tildes as in path as in filenames are handled correctly now:
 only files, containing tilde '~', are backups, thus are not valid.

 [KJ]:
 Definition of `space' was removed, scripts/Kbuild.include has one.
 That definition was taken right from the GNU make manual, while Kbuild's
 version is original.

Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Bastian Blank <bastian@waldi.eu.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Oleg Verych <olecom@flower.upol.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

 GNU binutils, root users, tmpfiles, external modules ro builds must
 be fixed to do the right thing now.

Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Horst Schirmeier <horst@schirmeier.com>
Cc: Jan Beulich <jbeulich@novell.com>
Cc: Daniel Drake <dsd@gentoo.org>
Cc: Andi Kleen <ak@suse.de>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Oleg Verych <olecom@flower.upol.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

  Replacing overhead of using some (external) programs
  instead of good old `sh'.

Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: William Stearns <wstearns@pobox.com>
Cc: Martin Schlemmer <azarah@nosferatu.za.org>
Signed-off-by: Oleg Verych <olecom@flower.upol.cz>
Acked-by: Mark Lord <lkml@rtr.ca>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Missing tab.  Missing entry in changelog
Signed-off-by: Steve French <sfrench@us.ibm.com>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/lib/uncached.c: In function 'run_uncached':
arch/mips/lib/uncached.c:47: warning: comparison is always true due to limited range of data type
arch/mips/lib/uncached.c:48: warning: comparison is always false due to limited range of data type
arch/mips/lib/uncached.c:57: warning: comparison is always true due to limited range of data type
arch/mips/lib/uncached.c:58: warning: comparison is always false due to limited range of data type
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The problem was introduced in 2.6.18.3 with the casting of some
36bit-defines (PCI memory) in au1000.h to resource_size_t which may be
u32 or u64 depending on the experimental CONFIG_RESOURCES_64BIT.

With unset CONFIG_RESOURCES_64BIT, the pci-memory cannot be accessed
because the ioremap in arch/mips/au1000/common/pci.c already used the
truncated addresses.
With set CONFIG_RESOURCES_64BIT, things get even worse, because PCI-scan
aborts, due to resource conflict: request_resource() in arch/mips/pci/pci.c
fails because the maximum iomem-address is 0xffffffff (32bit) but the
pci-memory-start-address is 0x440000000 (36bit).

To get pci working again, I propose the following patch:

1. remove the resource_size_t-casting from au1000.h again
2. make the casting in arch/mips/au1000/common/pci.c (it's allowed and
necessary here. The 36bit-handling will be done in __fixup_bigphys_addr).

With this patch pci works again like in 2.6.18.2, the gcc-compile warnings
in pci.c are gone and it doesn't depend on CONFIG_EXPERIMENTAL.
Signed-off-by: Alexander Bigga <ab@mycable.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The N32 and O32 pselect6 syscalls need to use compat_sys_pselect6 to
translate arguments from 32-bit to 64-bit layout.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This patch adds LSM hooks into the setaffinity and getaffinity functions
for the mips architecture to enable security modules to control these
operations between tasks with different security attributes. This
implementation uses the existing task_setscheduler and task_getscheduler
LSM hooks.
Signed-Off-By: David Quigley <dpquigl@tycho.nsa.gov>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

  CC      arch/mips/au1000/pb1100/board_setup.o
arch/mips/au1000/pb1100/board_setup.c: In function ‘board_setup’:
arch/mips/au1000/pb1100/board_setup.c:104: warning: passing argument 1 of ‘readb’ makes pointer from integer without a cast
arch/mips/au1000/pb1100/board_setup.c:105: warning: passing argument 1 of ‘readb’ makes pointer from integer without a cast
arch/mips/au1000/pb1100/board_setup.c:105: warning: passing argument 2 of ‘writeb’ makes pointer from integer without a cast
arch/mips/au1000/pb1100/board_setup.c:109: warning: passing argument 1 of ‘readb’ makes pointer from integer without a cast
arch/mips/au1000/pb1100/board_setup.c:110: warning: passing argument 1 of ‘readb’ makes pointer from integer without a cast
arch/mips/au1000/pb1100/board_setup.c:110: warning: passing argument 2 of ‘writeb’ makes pointer from integer without a cast
arch/mips/au1000/pb1100/board_setup.c:51: warning: unused variable ‘sys_clksrc’
arch/mips/au1000/pb1100/board_setup.c:51: warning: unused variable ‘sys_freqctrl’
arch/mips/au1000/pb1100/board_setup.c:50: warning: unused variable ‘pin_func’
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

  CC      arch/mips/au1000/common/pci.o
arch/mips/au1000/common/pci.c:42: warning: large integer implicitly truncated to unsigned type
arch/mips/au1000/common/pci.c:43: warning: large integer implicitly truncated to unsigned type
arch/mips/au1000/common/pci.c:49: warning: large integer implicitly truncated to unsigned type
arch/mips/au1000/common/pci.c:50: warning: large integer implicitly truncated to unsigned type
arch/mips/au1000/common/pci.c: In function ‘au1x_pci_setup’:
arch/mips/au1000/common/pci.c:82: warning: ISO C90 forbids mixed declarations and code
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Jan Altenberg <jan@linutronix.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

early_serial_setup is only defined when CONFIG_SERIAL_8250 is set.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>