Merge tag 'amd-drm-fixes-6.9-2024-04-24' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.9-2024-04-24:

amdgpu:
- Suspend/resume fix
- Don't expose gpu_od directory if it's empty
- SDMA 4.4.2 fix
- VPE fix
- BO eviction fix
- UMSCH fix
- SMU 13.0.6 reset fixes
- GPUVM flush accounting fix
- SDMA 5.2 fix
- Fix possible UAF in mes code

amdkfd:
- Eviction fence handling fix
- Fix memory leak when GPU memory allocation fails
- Fix dma-buf validation
- Fix rescheduling of restore worker
- SVM fix
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240424202408.1973661-1-alexander.deucher@amd.com

Delete fence fallback timer to fix the ramdom
use-after-free issue.

v2: move to amdgpu_mes.c
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This avoids a potential conflict with firmwares with the newer
HDP flush mechanism.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Here are the corrections needed for the queue ring buffer size
calculation for the following cases:
- Remove the KIQ VM flush ring usage.
- Add the invalidate TLBs packet for gfx10 and gfx11 queue.
- There's no VM flush and PFP sync, so remove the gfx9 real
  ring and compute ring buffer usage.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Do VRAM accounting when doing migrations to vram to make sure
there is enough available VRAM and migrating to VRAM doesn't evict
other possible non-unified memory BOs. If migrating to VRAM fails,
driver can fall back to using system memory seamlessly.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

During mode-2 reset, pci config space registers are affected at device
side. However, certain platforms have switches which assign virtual BAR
addresses and returns the same even after device is reset. This
affects pci_restore_state() as it doesn't issue another config write, if
the value read is same as the saved value.

Add a workaround to write saved config space values from driver side.
Presently, these switches are in platforms with SMU v13.0.6 SOCs, hence
restrict the workaround only to those.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

umsch test needs full GPU functionality(e.g., VM update, TLB flush,
possibly buffer moving under memory pressure) which may be not ready
under these states. Just skip it to avoid potential issues.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Handle the case that the restore worker was already scheduled by another
eviction while the restore was in progress.

Fixes: 9a1c1339 ("drm/amdkfd: Run restore_workers on freezable WQs")
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Tested-by: Yunxiang Li <Yunxiang.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Make SVM BOs more likely to get evicted than other BOs. These BOs
opportunistically use available VRAM, but can fall back relatively
seamlessly to system memory. It also avoids SVM migrations evicting
other, more important BOs as they will evict other SVM allocations
first.
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Acked-by: Mukul Joshi <mukul.joshi@amd.com>
Tested-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The vpe dpm settings should be done before firmware is loaded.
Otherwise, the frequency cannot be successfully raised.
Signed-off-by: Peyton Lee <peytolee@amd.com>
Reviewed-by: Lang Yu <lang.yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

HDP Flush request bit can be kept unique per AID, and doesn't need to be
unique SOC-wide. Assign only bits 10-13 for SDMA v4.4.2.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

gpu_od should be removed if it's an empty directory
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reported-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

When page table BOs were evicted but not validated before
updating page tables, VM is still in evicting state,
amdgpu_vm_update_range returns -EBUSY and
restore_process_worker runs into a dead loop.

v2: Split the BO validation and page table update into two
separate loops in amdgpu_amdkfd_restore_process_bos. (Felix)
  1.Validate BOs
  2.Validate VM (and DMABuf attachments)
  3.Update page tables for the BOs validated above

Fixes: 50661eb1 ("drm/amdgpu: Auto-validate DMABuf imports in compute VMs")
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Free the sync object if the memory allocation fails for any
reason.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Handle case that dma_fence_get_rcu_safe returns NULL.

If restore work is already scheduled, only update its timer. The same
work item cannot be queued twice, so undo the extra queue eviction.

Fixes: 9a1c1339 ("drm/amdkfd: Run restore_workers on freezable WQs")
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Tested-by: Gang BA <Gang.Ba@amd.com>
Reviewed-by: Gang BA <Gang.Ba@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Otherwise we can end up with a frame on unsuspend where color management
is not applied when userspace has not committed themselves.

Fixes re-applying color management on Steam Deck/Gamescope on S3 resume.
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Pull char / misc driver fixes from Greg KH:
 "Here are some small char/misc and other driver fixes for 6.9-rc5.
  Included in here are the following:

   - binder driver fix for reported problem

   - speakup crash fix

   - mei driver fixes for reported problems

   - comdei driver fix

   - interconnect driver fixes

   - rtsx driver fix

   - peci.h kernel doc fix

  All of these have been in linux-next for over a week with no reported
  problems"

* tag 'char-misc-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  peci: linux/peci.h: fix Excess kernel-doc description warning
  binder: check offset alignment in binder_get_object()
  comedi: vmk80xx: fix incomplete endpoint checking
  mei: vsc: Unregister interrupt handler for system suspend
  Revert "mei: vsc: Call wake_up() in the threaded IRQ handler"
  misc: rtsx: Fix rts5264 driver status incorrect when card removed
  mei: me: disable RPL-S on SPS and IGN firmwares
  speakup: Avoid crash on very long word
  interconnect: Don't access req_list while it's being manipulated
  interconnect: qcom: x1e80100: Remove inexistent ACV_PERF BCM

Pull kernfs bugfix and documentation update from Greg KH:
 "Here are two changes for 6.9-rc5 that deal with "driver core" stuff,
  that do the following:

   - sysfs reference leak fix

   - embargoed-hardware-issues.rst update for Power

  Both of these have been in linux-next for over a week with no reported
  issues"

* tag 'driver-core-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  Documentation: embargoed-hardware-issues.rst: Add myself for Power
  fs: sysfs: Fix reference leak in sysfs_break_active_protection()

Pull tty/serial driver fixes from Greg KH:
 "Here are some small tty and serial driver fixes for 6.9-rc5 that
  resolve a bunch of reported problems. Included in here are:

   - MAINTAINERS and .mailmap update for Richard Genoud

   - serial core regression fixes from 6.9-rc1 changes

   - pci id cleanups

   - serial core crash fix

   - stm32 driver fixes

   - 8250 driver fixes

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'tty-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: stm32: Reset .throttled state in .startup()
  serial: stm32: Return IRQ_NONE in the ISR if no handling happend
  serial: core: Fix missing shutdown and startup for serial base port
  serial: core: Clearing the circular buffer before NULLifying it
  MAINTAINERS: mailmap: update Richard Genoud's email address
  serial/pmac_zilog: Remove flawed mitigation for rx irq flood
  serial: 8250_pci: Remove redundant PCI IDs
  serial: core: Fix regression when runtime PM is not enabled
  serial: mxs-auart: add spinlock around changing cts state
  serial: 8250_dw: Revert: Do not reclock if already at correct rate
  serial: 8250_lpc18xx: disable clks on error in probe()

Pull USB / Thunderbolt driver fixes from Greg KH:
 "Here are some small USB and Thunderbolt driver fixes for 6.9-rc5.
  Included in here are:

   - MAINTAINER file update for invalid email address

   - usb-serial device id updates

   - typec driver fixes

   - thunderbolt / usb4 driver fixes

   - usb core shutdown fixes

   - cdc-wdm driver revert for reported problem in -rc1

   - usb gadget driver fixes

   - xhci driver fixes

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'usb-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits)
  USB: serial: option: add Telit FN920C04 rmnet compositions
  usb: dwc3: ep0: Don't reset resource alloc flag
  Revert "usb: cdc-wdm: close race between read and workqueue"
  USB: serial: option: add Rolling RW101-GL and RW135-GL support
  USB: serial: option: add Lonsung U8300/U9300 product
  USB: serial: option: add support for Fibocom FM650/FG650
  USB: serial: option: support Quectel EM060K sub-models
  USB: serial: option: add Fibocom FM135-GL variants
  usb: misc: onboard_usb_hub: Disable the USB hub clock on failure
  thunderbolt: Avoid notify PM core about runtime PM resume
  thunderbolt: Fix wake configurations after device unplug
  usb: dwc2: host: Fix dereference issue in DDMA completion flow.
  usb: typec: mux: it5205: Fix ChipID value typo
  MAINTAINERS: Drop Li Yang as their email address stopped working
  usb: gadget: fsl: Initialize udc before using it
  usb: Disable USB3 LPM at shutdown
  usb: gadget: f_ncm: Fix UAF ncm object at re-bind after usb ep transport error
  usb: typec: tcpm: Correct the PDO counting in pd_set
  usb: gadget: functionfs: Wait for fences before enqueueing DMABUF
  usb: gadget: functionfs: Fix inverted DMA fence direction
  ...

Pull scheduler fix from Borislav Petkov:

 - Add a missing memory barrier in the concurrency ID mm switching

* tag 'sched_urgent_for_v6.9_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Add missing memory barrier in switch_mm_cid

Pull x86 fixes from Borislav Petkov:

 - Fix CPU feature dependencies of GFNI, VAES, and VPCLMULQDQ

 - Print the correct error code when FRED reports a bad event type

 - Add a FRED-specific INT80 handler without the special dances that
   need to happen in the current one

 - Enable the using-the-default-return-thunk-but-you-should-not warning
   only on configs which actually enable those special return thunks

 - Check the proper feature flags when selecting BHI retpoline
   mitigation

* tag 'x86_urgent_for_v6.9_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpufeatures: Fix dependencies for GFNI, VAES, and VPCLMULQDQ
  x86/fred: Fix incorrect error code printout in fred_bad_type()
  x86/fred: Fix INT80 emulation for FRED
  x86/retpolines: Enable the default thunk warning only on relevant configs
  x86/bugs: Fix BHI retpoline check

Pull block fixes from Jens Axboe:
 "Just two minor fixes that should go into the 6.9 kernel release, one
  fixing a regression with partition scanning errors, and one fixing a
  WARN_ON() that can get triggered if we race with a timer"

* tag 'block-6.9-20240420' of git://git.kernel.dk/linux:
  blk-iocost: do not WARN if iocg was already offlined
  block: propagate partition scanning errors to the BLKRRPART ioctl

Pull email address update from James Bottomley:
 "My IBM email has stopped working, so update to a working email
  address"

* tag 'email' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  MAINTAINERS: update to working email address

Pull kvm fixes from Paolo Bonzini:
 "This is a bit on the large side, mostly due to two changes:

   - Changes to disable some broken PMU virtualization (see below for
     details under "x86 PMU")

   - Clean up SVM's enter/exit assembly code so that it can be compiled
     without OBJECT_FILES_NON_STANDARD. This fixes a warning "Unpatched
     return thunk in use. This should not happen!" when running KVM
     selftests.

  Everything else is small bugfixes and selftest changes:

   - Fix a mostly benign bug in the gfn_to_pfn_cache infrastructure
     where KVM would allow userspace to refresh the cache with a bogus
     GPA. The bug has existed for quite some time, but was exposed by a
     new sanity check added in 6.9 (to ensure a cache is either
     GPA-based or HVA-based).

   - Drop an unused param from gfn_to_pfn_cache_invalidate_start() that
     got left behind during a 6.9 cleanup.

   - Fix a math goof in x86's hugepage logic for
     KVM_SET_MEMORY_ATTRIBUTES that results in an array overflow
     (detected by KASAN).

   - Fix a bug where KVM incorrectly clears root_role.direct when
     userspace sets guest CPUID.

   - Fix a dirty logging bug in the where KVM fails to write-protect
     SPTEs used by a nested guest, if KVM is using Page-Modification
     Logging and the nested hypervisor is NOT using EPT.

  x86 PMU:

   - Drop support for virtualizing adaptive PEBS, as KVM's
     implementation is architecturally broken without an obvious/easy
     path forward, and because exposing adaptive PEBS can leak host LBRs
     to the guest, i.e. can leak host kernel addresses to the guest.

   - Set the enable bits for general purpose counters in
     PERF_GLOBAL_CTRL at RESET time, as done by both Intel and AMD
     processors.

   - Disable LBR virtualization on CPUs that don't support LBR
     callstacks, as KVM unconditionally uses
     PERF_SAMPLE_BRANCH_CALL_STACK when creating the perf event, and
     would fail on such CPUs.

  Tests:

   - Fix a flaw in the max_guest_memory selftest that results in it
     exhausting the supply of ucall structures when run with more than
     256 vCPUs.

   - Mark KVM_MEM_READONLY as supported for RISC-V in
     set_memory_region_test"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (30 commits)
  KVM: Drop unused @may_block param from gfn_to_pfn_cache_invalidate_start()
  KVM: selftests: Add coverage of EPT-disabled to vmx_dirty_log_test
  KVM: x86/mmu: Fix and clarify comments about clearing D-bit vs. write-protecting
  KVM: x86/mmu: Remove function comments above clear_dirty_{gfn_range,pt_masked}()
  KVM: x86/mmu: Write-protect L2 SPTEs in TDP MMU when clearing dirty status
  KVM: x86/mmu: Precisely invalidate MMU root_role during CPUID update
  KVM: VMX: Disable LBR virtualization if the CPU doesn't support LBR callstacks
  perf/x86/intel: Expose existence of callback support to KVM
  KVM: VMX: Snapshot LBR capabilities during module initialization
  KVM: x86/pmu: Do not mask LVTPC when handling a PMI on AMD platforms
  KVM: x86: Snapshot if a vCPU's vendor model is AMD vs. Intel compatible
  KVM: x86: Stop compiling vmenter.S with OBJECT_FILES_NON_STANDARD
  KVM: SVM: Create a stack frame in __svm_sev_es_vcpu_run()
  KVM: SVM: Save/restore args across SEV-ES VMRUN via host save area
  KVM: SVM: Save/restore non-volatile GPRs in SEV-ES VMRUN via host save area
  KVM: SVM: Clobber RAX instead of RBX when discarding spec_ctrl_intercepted
  KVM: SVM: Drop 32-bit "support" from __svm_sev_es_vcpu_run()
  KVM: SVM: Wrap __svm_sev_es_vcpu_run() with #ifdef CONFIG_KVM_AMD_SEV
  KVM: SVM: Create a stack frame in __svm_vcpu_run() for unwinding
  KVM: SVM: Remove a useless zeroing of allocated memory
  ...

Pull powerpc fixes from Michael Ellerman:

 - Fix wireguard loading failure on pre-Power10 due to Power10 crypto
   routines

 - Fix papr-vpd selftest failure due to missing variable initialization

 - Avoid unnecessary get/put in spapr_tce_platform_iommu_attach_dev()

Thanks to Geetika Moolchandani, Jason Gunthorpe, Michal Suchánek, Nathan
Lynch, and Shivaprasad G Bhat.

* tag 'powerpc-6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  selftests/powerpc/papr-vpd: Fix missing variable initialization
  powerpc/crypto/chacha-p10: Fix failure on non Power10
  powerpc/iommu: Refactor spapr_tce_platform_iommu_attach_dev()

Pull clk fixes from Stephen Boyd:
 "A couple clk driver fixes, a build fix, and a deadlock fix:

   - Mediatek mt7988 has broken PCIe because the wrong parent is used

   - Mediatek clk drivers may deadlock when registering their clks
     because the clk provider device is repeatedly runtime PM resumed
     and suspended during probe and clk registration.

     Resuming the clk provider device deadlocks with an ABBA deadlock
     due to genpd_lock and the clk prepare_lock. The fix is to keep the
     device runtime resumed while registering clks.

   - Another runtime PM related deadlock, this time with disabling
     unused clks during late init.

     We get an ABBA deadlock where a device is runtime PM resuming (or
     suspending) while the disabling of unused clks is happening in
     parallel. That runtime PM action calls into the clk framework and
     tries to grab the clk prepare_lock while the disabling of unused
     clks holds the prepare_lock and is waiting for that runtime PM
     action to complete.

     The fix is to runtime resume all the clk provider devices before
     grabbing the clk prepare_lock during disable unused.

   - A build fix to provide an empty devm_clk_rate_exclusive_get()
     function when CONFIG_COMMON_CLK=n"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: mediatek: mt7988-infracfg: fix clocks for 2nd PCIe port
  clk: mediatek: Do a runtime PM get on controllers during probe
  clk: Get runtime PM before walking tree for clk_summary
  clk: Get runtime PM before walking tree during disable_unused
  clk: Initialize struct clk_core kref earlier
  clk: Don't hold prepare_lock when calling kref_put()
  clk: Remove prepare_lock hold assertion in __clk_release()
  clk: Provide !COMMON_CLK dummy for devm_clk_rate_exclusive_get()

jejb@linux.ibm.com no longer works.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

Merge tag 'perf-tools-fixes-for-v6.9-2024-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tools fixes from Namhyung Kim:
 "A random set of small bug fixes:

   - Fix perf annotate TUI when used with data type profiling

   - Work around BPF verifier about sighand lock checking

  And a set of kernel header synchronization"

* tag 'perf-tools-fixes-for-v6.9-2024-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
  tools/include: Sync arm64 asm/cputype.h with the kernel sources
  tools/include: Sync asm-generic/bitops/fls.h with the kernel sources
  tools/include: Sync x86 asm/msr-index.h with the kernel sources
  tools/include: Sync x86 asm/irq_vectors.h with the kernel sources
  tools/include: Sync x86 CPU feature headers with the kernel sources
  tools/include: Sync uapi/sound/asound.h with the kernel sources
  tools/include: Sync uapi/linux/kvm.h and asm/kvm.h with the kernel sources
  tools/include: Sync uapi/linux/fs.h with the kernel sources
  tools/include: Sync uapi/drm/i915_drm.h with the kernel sources
  perf lock contention: Add a missing NULL check
  perf annotate: Make sure to call symbol__annotate2() in TUI

Pull hardening fixes from Kees Cook:

 - Correctly disable UBSAN configs in configs/hardening (Nathan
   Chancellor)

 - Add missing signed integer overflow trap types to arm64 handler

* tag 'hardening-v6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  ubsan: Add awareness of signed integer overflow traps
  configs/hardening: Disable CONFIG_UBSAN_SIGNED_WRAP
  configs/hardening: Fix disabling UBSAN configurations

Pull iommufd fixes from Jason Gunthorpe:
 "Two fixes for the selftests:

   - CONFIG_IOMMUFD_TEST needs CONFIG_IOMMUFD_DRIVER to work

   - The kconfig fragment sshould include fault injection so the fault
     injection test can work"

* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
  iommufd: Add config needed for iommufd_fail_nth
  iommufd: Add missing IOMMUFD_DRIVER kconfig for the selftest

Pull rdma fixes from Jason Gunthorpe:

 - Add a missing mutex_destroy() in rxe

 - Enhance the debugging print for cm_destroy failures to help debug
   these

 - Fix mlx5 MAD processing in cases where multiport devices are running
   in switchedev mode

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/mlx5: Fix port number for counter query in multi-port configuration
  RDMA/cm: Print the old state when cm_destroy_id gets timeout
  RDMA/rxe: Fix the problem "mutex_destroy missing"

Pull fs/9p fixes from Eric Van Hensbergen:
 "This contains a reversion of one of the original 6.9 patches which
  seems to have been the cause of most of the instability. It also
  incorporates several fixes to legacy support and cache fixes.

  There are few additional changes to improve stability, but I want
  another week of testing before sending them upstream"

* tag '9p-fixes-for-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
  fs/9p: drop inodes immediately on non-.L too
  fs/9p: Revert "fs/9p: fix dups even in uncached mode"
  fs/9p: remove erroneous nlink init from legacy stat2inode
  9p: explicitly deny setlease attempts
  fs/9p: fix the cache always being enabled on files with qid flags
  fs/9p: translate O_TRUNC into OTRUNC
  fs/9p: only translate RWX permissions for plain 9P2000

Pull fuse fixes from Miklos Szeredi:

 - Fix two bugs in the new passthrough mode

 - Fix a statx bug introduced in v6.6

 - Fix code documentation

* tag 'fuse-fixes-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  cuse: add kernel-doc comments to cuse_process_init_reply()
  fuse: fix leaked ENOSYS error on first statx call
  fuse: fix parallel dio write on file open in passthrough mode
  fuse: fix wrong ff->iomode state changes from parallel dio write

Pull arm64 fixes from Catalin Marinas:

 - Fix a kernel fault during page table walking in huge_pte_alloc() with
   PTABLE_LEVELS=5 due to using p4d_offset() instead of p4d_alloc()

 - head.S fix and cleanup to disable the MMU before toggling the
   HCR_EL2.E2H bit when entering the kernel with the MMU on from the EFI
   stub. Changing this bit (currently from VHE to nVHE) causes some
   system registers as well as page table descriptors to be interpreted
   differently, potentially resulting in spurious MMU faults

 - Fix translation fault in swsusp_save() accessing MEMBLOCK_NOMAP
   memory ranges due to kernel_page_present() returning true in most
   configurations other than rodata_full == true,
   CONFIG_DEBUG_PAGEALLOC=y or CONFIG_KFENCE=y

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: hibernate: Fix level3 translation fault in swsusp_save()
  arm64/head: Disable MMU at EL2 before clearing HCR_EL2.E2H
  arm64/head: Drop unnecessary pre-disable-MMU workaround
  arm64/hugetlb: Fix page table walk in huge_pte_alloc()

Pull s390 updates from Alexander Gordeev:

 - Fix NULL pointer dereference in program check handler

 - Fake IRBs are important events relevant for problem analysis. Add
   traces when queueing and delivering

 - Fix a race condition in ccw_device_set_online() that can cause the
   online process to fail

 - Deferred condition code 1 response indicates that I/O was not started
   and should be retried. The current QDIO implementation handles a cc1
   response as an error, resulting in a failed QDIO setup. Fix that by
   retrying the setup when a cc1 response is received

* tag 's390-6.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/mm: Fix NULL pointer dereference
  s390/cio: log fake IRB events
  s390/cio: fix race condition during online processing
  s390/qdio: handle deferred cc1

Merge tag 'bootconfig-fixes-v6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull bootconfig fixes from Masami Hiramatsu:

 - Fix potential static_command_line buffer overrun.

   Currently we allocate the memory for static_command_line based on
   "boot_command_line", but it will copy "command_line" into it. So we
   use the length of "command_line" instead of "boot_command_line" (as
   we previously did)

 - Use memblock_free_late() in xbc_exit() instead of memblock_free()
   after the buddy system is initialized

 - Fix a kerneldoc warning

* tag 'bootconfig-fixes-v6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  bootconfig: Fix the kerneldoc of _xbc_exit()
  bootconfig: use memblock_free_late to free xbc memory to buddy
  init/main.c: Fix potential static_command_line memory overflow

Pull thermal control fix from Rafael Wysocki:
 "This prevents the thermal debug code from attempting to divide by zero
  and corrects trip point statistics (Rafael Wysocki)"

* tag 'thermal-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal/debugfs: Add missing count increment to thermal_debug_tz_trip_up()

Pull sound fixes from Takashi Iwai:
 "Things look calm and normal, we got handful HD-audio-related small
  fixes and a fix for MIDI 2.0 UMP handling"

* tag 'sound-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: seq: ump: Fix conversion from MIDI2 to MIDI1 UMP messages
  ALSA: hda/realtek - Enable audio jacks of Haier Boyue G42 with ALC269VC
  ALSA: hda/realtek: Add quirks for Huawei Matebook D14 NBLB-WAX9N
  ALSA: hda/realtek: Fix volumn control of ThinkBook 16P Gen4
  ALSA: hda/realtek: Fixes for Asus GU605M and GA403U sound
  ALSA: hda/tas2781: Add new vendor_id and subsystem_id to support ThinkPad ICE-1
  ALSA: hda/tas2781: correct the register for pow calibrated data
  ALSA: hda/realtek: Add quirk for HP SnowWhite laptops