- 26 Sep, 2012 40 commits
-
-
H Hartley Sweeten authored
Use the cfc_check_trigger_src() helper for Step 1 in all the driver cmdtest functions. Use the cfc_check_trigger_is_unique() helper for Step 2 in all the driver cmdtest functions. Note that single source triggers do not need to be checked, they are already unique if they pass Step 1. For aesthetic reasons, change the comments in the cmdtest functions for steps 1 and 2 so that they are all the same. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Harsh Kumar authored
usb_free_urb(NULL) is safe. So, the check was removed. Signed-off-by:
Harsh Kumar <harsh1kumar@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Harsh Kumar authored
checkpatch cleanup: Corrected wrong placement of a brace and line exceeding 80 characters Signed-off-by:
Harsh Kumar <harsh1kumar@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Harsh Kumar authored
checkpatch cleanup: Removed some undesired spaces, lines and tabs to comply with coding style. Signed-off-by:
Harsh Kumar <harsh1kumar@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Harsh Kumar authored
Few typo corrections in comments Signed-off-by:
Harsh Kumar <harsh1kumar@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Harsh Kumar authored
checkpatch cleanup: Changed c99 comments to c89 comments Signed-off-by:
Harsh Kumar <harsh1kumar@gmail.com> Reviewed-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Larry Finger authored
Some post-3.4 kernels have a problem when a cloned skb is used in the RX path. This patch handles one such case for r8712u. The patch was suggested by Eric Dumazet. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> [v3.4+] Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ian Abbott authored
`ni_ai_poll()` currently acquires (and later releases) the comedi device's spin-lock iff `in_interrupt()` returns 0. However, it is only called during processing of a `COMEDI_POLL` ioctl so `in_interrupt()` will always return 0 in this case. Remove this test and acquire/release the spin-lock unconditionally. This eliminates a sparse warning about different lock contexts for basic block. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ian Abbott authored
`s626_enc_insn_config()` is the `insn_config()` handler for a counter subdevice. The `data[0]` value is supposed to be one of the `INSN_CONFIG_...` constants defined in "comedi.h" indicating the type of configuration instruction, but this function seems to be using it as a variable value to preload the counter with. Various values of `data[0]` are going to cause `check_insn_config_length()` in the comedi core ("comedi_fops.c") to return an error, and this function won't be called in those cases. Most other values will log a warning to the kernel log. It's not entirely clear what constant should be checked for in `data[0]`, so add a "FIXME" comment for now. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ian Abbott authored
`s626_enc_insn_config()` is incorrectly dereferencing `insn->data` which is a pointer to user memory. It should be dereferencing the separate `data` parameter that points to a copy of the data in kernel memory. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Reviewed-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
This if() check was flipped from a test for valid data params to a test for invalid params. As pointed out by Dan Carpenter, the orignal test was: if ((data[1] > data[0]) && (data[0] > 0)) { the flipped test should be: if (data[1] <= data[0]) ... Add the missing '='. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Cleanup the comments to follow the coding style of the kernel. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
The private data is kzalloc'ed. There is no need to set any of the initial data to '0'. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
This variable is never used in the driver. Just remove it. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
This variable is never used in the driver. Just remove it. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
IsBoardRevA is not defined in the driver. Remove the comment about it. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Until it's determined if this workaround can be removed, block out the code with an #if 0/#endif and remove the individual comments on each line. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
This variable is only used to count the number of dma buffers allocated during the attach. If an allocation fails, the attach function exits with -ENOMEM. When this variable is checked later it will always be == 2. Just remove the variable and the check. This allows bringing the code back an indent level in s626_initialize(). Note, coding style issues in this function are not addressed yet. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Add a simple dev_info() message after a successfull attach. Change the final return to '0' to indicate success. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
The private data is kzalloc'ed. All the variables in it are initially '0'. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
To make the attach a bit cleaner, factor the board init code out of attach_pci() into a new function. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Only set dev->irq if request_irq is successfull. Remove the kernel message noise. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
To make the attach a bit cleaner, factor the dma buffer allocation out of attach_pci() into a new function. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
'devpriv->base_addr' is valid from this point on in the attach_pci() function. Remove the unnecessary checks. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
The local variable 'resourceStart' is only used in the ioremap() to hold the PCI bar 0 base address. Just use the pci_resource_start() directly in the ioremap(). Also, instead of assuming the resource size for the ioremap, use pci_resource_len() to get the actual size. Remove the kernel noise when the ioremap fails and change the error code from -ENODEV to -ENOMEM. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
This variable is only used as a flag to indicate that the pci device has been enabled and needs to be disabled in the detach. Use the comedi_device 'iobase' for this and remove the private data variable. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
The 'result' variable is only used to check the return from comedi_pci_enable(). Just reuse the 'ret' variable. Also, remove the kernel noise and use the error code from comedi_pci_enable() instead of returning -ENODEV. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Instead of the literal string "s626", use the dev->board_name for the resource name when enabling the PCI device and requesting the irq. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Use the hw_dev pointer in the comedi_device struct to hold the pci_dev instead of carrying it in the private data. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Convert this PCI driver to use the comedi PCI auto config attach mechanism by adding an 'attach_pci' callback function. Since the driver does not require any external configuration options, and the legacy 'attach' callback is not optional, remove it. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
This driver only supports one board type. Move the used board info out of the boardinfo struct and remove it. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ian Abbott authored
Add subdevice 1 as an analog input (AI) subdevice. It currently only supports basic, software-triggered acquisitions. This is mostly the work of Fred Brooks (MODULE_AUTHOR), but he based his update on an older version of the driver. I applied the relevant changes with a few tweaks: adding an explicit `udelay(1)` in a timeout loop, replacing binary constants with hex, renaming functions, replacing `printk()` calls, removing exported symbols, removing (very) incomplete comedi "command" support, and making some coding-style changes. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ian Abbott authored
Rename `subdev_700_insn()` to `daq700_dio_insn_bits()` and `subdev_700_insn_config()` to `daq700_dio_insn_config()`. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ian Abbott authored
Rename a few functions and variables to use the prefix `daq700` instead of the prefix or suffix `dio700`. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kevin McKinney authored
This patch removes typedef for _stCPacketClassificationRuleSI, changes the name of the struct to bcm_packet_class_rules, and updates the comments appropriately . In addition, any calls to typedefs "CCPacketClassificationRuleSI, stCPacketClassificationRuleSI, or *pstCPacketClassificationRuleSI" are changed to call the struct directly. Signed-off-by:
Kevin McKinney <klmckinney1@gmail.com> Acked-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kevin McKinney authored
This patch removes typedef for _stPhsRuleSI, changes the name of the struct to bcm_phs_rules, and updates the comments appropriately. In addition, any calls to typedefs "stPhsRuleSI, *pstPhsRuleSI, or CPhsRuleSI" are changed to call the struct directly. Signed-off-by:
Kevin McKinney <klmckinney1@gmail.com> Acked-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kevin McKinney authored
This patch removes typedef for _stConvergenceSLTypes, changes the name of the struct to bcm_convergence_types, and updates the comments appropriately. In addition, any calls to typedefs "stConvergenceSLTypes, CConvergenceSLTypes, and *pstConvergenceSLTypes" are changed to call the struct directly. Signed-off-by:
Kevin McKinney <klmckinney1@gmail.com> Acked-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kevin McKinney authored
This patch removes typedef for _stServiceFlowParamSI, changes the name of the struct to bcm_connect_mgr_params, and updates the comments appropriately. In addition, any calls to typedefs "stServiceFlowParamSI, *pstServiceFlowParamSI, and CServiceFlowParamSI" are changed to call the struct directly. Signed-off-by:
Kevin McKinney <klmckinney1@gmail.com> Acked-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kevin McKinney authored
This patch removes typedef for _stLocalSFAddRequest, and changes the name of the struct to bcm_add_request. In addition, any calls to typedefs "stLocalSFAddRequest or *pstLocalSFAddRequest" are changed to call the struct directly. Signed-off-by:
Kevin McKinney <klmckinney1@gmail.com> Acked-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kevin McKinney authored
This patch removes typedef for _stLocalSFAddIndication, and changes the name of the struct to bcm_add_indication. In addition, any calls to typedefs "stLocalSFAddIndication, *pstLocalSFAddIndication, stLocalSFChangeRequest, *pstLocalSFChangeRequest, stLocalSFChangeIndication, or *pstLocalSFChangeIndication " are changed to call the struct directly. Signed-off-by:
Kevin McKinney <klmckinney1@gmail.com> Acked-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-