- 23 Mar, 2017 23 commits
-
-
Johan Hovold authored
Use the new endpoint helpers to lookup the required interrupt-in endpoint and optional interrupt-out endpoint. Note that the descriptors are searched in reverse order to avoid any regressions. Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
Use the new endpoint helpers to lookup the required interrupt-in endpoint. IOWarror56 devices also requires an interrupt-out endpoint, which is looked up in a second call. Note that the descriptors are searched in reverse order to avoid any regressions. Signed-off-by:
-
Johan Hovold authored
Use the new endpoint helpers to lookup the required bulk-in endpoint. Note that we now pick the first bulk-in endpoint regardless of whether it happens to be the first descriptor. Signed-off-by:
-
Johan Hovold authored
Use the new endpoint helpers to lookup the required bulk-in and bulk-out endpoints. Signed-off-by:
-
Johan Hovold authored
Use the new endpoint helpers to lookup the required bulk-in endpoint. Signed-off-by:
Keith Packard <keithp@keithp.com> Signed-off-by:
-
Johan Hovold authored
Use the new endpoint helpers to lookup the required interrupt-in endpoint. Note that the default retval was never used. Signed-off-by:
-
Johan Hovold authored
Use the new endpoint helpers to lookup the required interrupt-in and interrupt-out endpoints. Note that the descriptors are searched in reverse order to avoid any regressions. Signed-off-by:
-
Johan Hovold authored
Make sure to return -ENOMEM on all allocation failures and -EIO on a string-retrieval error (instead of returning -ENODEV for some such errors). Signed-off-by:
-
Johan Hovold authored
Drop a redundant sanity check for a NULL parent usb device, which is never true. Signed-off-by:
-
Johan Hovold authored
Several drivers have implemented their endpoint look-up loops in such a way that they have picked the last endpoint descriptor of the specified type should more than one such descriptor exist. To avoid any regressions, add corresponding helpers to lookup endpoints by searching the endpoint descriptors in reverse order. Signed-off-by:
-
Johan Hovold authored
Many USB drivers iterate over the available endpoints to find required endpoints of a specific type and direction. Typically the endpoints are required for proper function and a missing endpoint should abort probe. To facilitate code reuse, add a helper to retrieve common endpoints (bulk or interrupt, in or out) and four wrappers to find a single endpoint. Note that the helpers are marked as __must_check to serve as a reminder to always verify that all expected endpoints are indeed present. This also means that any optional endpoints, typically need to be looked up through separate calls. Signed-off-by:
-
Baolin Wang authored
Since the old common Samsung USB PHY code has been removed by commit ea2fdf84 ("usb: phy: samsung: remove old common USB PHY code"), thus remove the unused config. Signed-off-by:
Baolin Wang <baolin.wang@linaro.org> Signed-off-by:
-
Heikki Krogerus authored
This adds driver for the USB Type-C PHY on Intel WhiskeyCove PMIC which is available on some of the Intel Broxton SoC based platforms. Signed-off-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-and-Tested-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Tested-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Heikki Krogerus authored
The purpose of USB Type-C connector class is to provide unified interface for the user space to get the status and basic information about USB Type-C connectors on a system, control over data role swapping, and when the port supports USB Power Delivery, also control over power role swapping and Alternate Modes. Signed-off-by:
-
Heikki Krogerus authored
Make a simple helper for matching strings with sysfs attribute files. In most parts the same as match_string(), except sysfs_match_string() uses sysfs_streq() instead of strcmp() for matching. This is more convenient when used with sysfs attributes. Signed-off-by:
-
Peter Chen authored
Set the dma for ehci from sysdev. The sysdev is pointing to device that is known to the system firmware or hardware. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Sriram Dash <sriram.dash@nxp.com> Signed-off-by:
Peter Chen <peter.chen@nxp.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Arnd Bergmann authored
For xhci-hcd platform device, all the DMA parameters are not configured properly, notably dma ops for dwc3 devices. So, set the dma for xhci from sysdev. sysdev is pointing to device that is known to the system firmware or hardware. Cc: Baolin Wang <baolin.wang@linaro.org> Tested-by:
Alexander Sverdlin <alexander.sverdlin@nokia.com> Tested-by:
Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Sriram Dash <sriram.dash@nxp.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Arnd Bergmann authored
For the dual role ehci fsl driver, sysdev will handle the dma config. Signed-off-by:
-
Arnd Bergmann authored
Set the dma for chipidea from sysdev. This is inherited from its parent node. Also, do not set dma mask for child as it is not required now. Signed-off-by:
-
Arnd Bergmann authored
For xhci-hcd platform device, all the DMA parameters are not configured properly, notably dma ops for dwc3 devices. The idea here is that you pass in the parent of_node along with the child device pointer, so it would behave exactly like the parent already does. The difference is that it also handles all the other attributes besides the mask. sysdev will represent the physical device, as seen from firmware or bus.Splitting the usb_bus->controller field into the Linux-internal device (used for the sysfs hierarchy, for printks and for power management) and a new pointer (used for DMA, DT enumeration and phy lookup) probably covers all that we really need. Signed-off-by:
Brian Norris <briannorris@chromium.org> Tested-by:
-
Guenter Roeck authored
While running a bind/unbind stress test with the dwc3 usb driver on rk3399, the following crash was observed. Unable to handle kernel NULL pointer dereference at virtual address 00000218 pgd = ffffffc00165f000 [00000218] *pgd=000000000174f003, *pud=000000000174f003, *pmd=0000000001750003, *pte=00e8000001751713 Internal error: Oops: 96000005 [#1] PREEMPT SMP Modules linked in: uinput uvcvideo videobuf2_vmalloc cmac ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat rfcomm xt_mark fuse bridge stp llc zram btusb btrtl btbcm btintel bluetooth ip6table_filter mwifiex_pcie mwifiex cfg80211 cdc_ether usbnet r8152 mii joydev snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device ppp_async ppp_generic slhc tun CPU: 1 PID: 29814 Comm: kworker/1:1 Not tainted 4.4.52 #507 Hardware name: Google Kevin (DT) Workqueue: pm pm_runtime_work task: ffffffc0ac540000 ti: ffffffc0af4d4000 task.ti: ffffffc0af4d4000 PC is at autosuspend_check+0x74/0x174 LR is at autosuspend_check+0x70/0x174 ... Call trace: [<ffffffc00080dcc0>] autosuspend_check+0x74/0x174 [<ffffffc000810500>] usb_runtime_idle+0x20/0x40 [<ffffffc000785ae0>] __rpm_callback+0x48/0x7c [<ffffffc000786af0>] rpm_idle+0x1e8/0x498 [<ffffffc000787cdc>] pm_runtime_work+0x88/0xcc [<ffffffc000249bb8>] process_one_work+0x390/0x6b8 [<ffffffc00024abcc>] worker_thread+0x480/0x610 [<ffffffc000251a80>] kthread+0x164/0x178 [<ffffffc0002045d0>] ret_from_fork+0x10/0x40 Source: (gdb) l *0xffffffc00080dcc0 0xffffffc00080dcc0 is in autosuspend_check (drivers/usb/core/driver.c:1778). 1773 /* We don't need to check interfaces that are 1774 * disabled for runtime PM. Either they are unbound 1775 * or else their drivers don't support autosuspend 1776 * and so they are permanently active. 1777 */ 1778 if (intf->dev.power.disable_depth) 1779 continue; 1780 if (atomic_read(&intf->dev.power.usage_count) > 0) 1781 return -EBUSY; 1782 w |= intf->needs_remote_wakeup; Code analysis shows that intf is set to NULL in usb_disable_device() prior to setting actconfig to NULL. At the same time, usb_runtime_idle() does not lock the usb device, and neither does any of the functions in the traceback. This means that there is no protection against a race condition where usb_disable_device() is removing dev->actconfig->interface[] pointers while those are being accessed from autosuspend_check(). To solve the problem, synchronize and validate device state between autosuspend_check() and usb_disconnect(). Acked-by:
-
Guenter Roeck authored
While stress testing a usb controller using a bind/unbind looop, the following error loop was observed. usb 7-1.2: new low-speed USB device number 3 using xhci-hcd usb 7-1.2: hub failed to enable device, error -108 usb 7-1-port2: cannot disable (err = -22) usb 7-1-port2: couldn't allocate usb_device usb 7-1-port2: cannot disable (err = -22) hub 7-1:1.0: hub_ext_port_status failed (err = -22) hub 7-1:1.0: hub_ext_port_status failed (err = -22) hub 7-1:1.0: activate --> -22 hub 7-1:1.0: hub_ext_port_status failed (err = -22) hub 7-1:1.0: hub_ext_port_status failed (err = -22) hub 7-1:1.0: activate --> -22 hub 7-1:1.0: hub_ext_port_status failed (err = -22) hub 7-1:1.0: hub_ext_port_status failed (err = -22) hub 7-1:1.0: activate --> -22 hub 7-1:1.0: hub_ext_port_status failed (err = -22) hub 7-1:1.0: hub_ext_port_status failed (err = -22) hub 7-1:1.0: activate --> -22 hub 7-1:1.0: hub_ext_port_status failed (err = -22) hub 7-1:1.0: hub_ext_port_status failed (err = -22) hub 7-1:1.0: activate --> -22 hub 7-1:1.0: hub_ext_port_status failed (err = -22) hub 7-1:1.0: hub_ext_port_status failed (err = -22) hub 7-1:1.0: activate --> -22 hub 7-1:1.0: hub_ext_port_status failed (err = -22) hub 7-1:1.0: hub_ext_port_status failed (err = -22) hub 7-1:1.0: activate --> -22 hub 7-1:1.0: hub_ext_port_status failed (err = -22) hub 7-1:1.0: hub_ext_port_status failed (err = -22) hub 7-1:1.0: activate --> -22 hub 7-1:1.0: hub_ext_port_status failed (err = -22) hub 7-1:1.0: hub_ext_port_status failed (err = -22) ** 57 printk messages dropped ** hub 7-1:1.0: activate --> -22 ** 82 printk messages dropped ** hub 7-1:1.0: hub_ext_port_status failed (err = -22) This continues forever. After adding tracebacks into the code, the call sequence leading to this is found to be as follows. [<ffffffc0007fc8e0>] hub_activate+0x368/0x7b8 [<ffffffc0007fceb4>] hub_resume+0x2c/0x3c [<ffffffc00080b3b8>] usb_resume_interface.isra.6+0x128/0x158 [<ffffffc00080b5d0>] usb_suspend_both+0x1e8/0x288 [<ffffffc00080c9c4>] usb_runtime_suspend+0x3c/0x98 [<ffffffc0007820a0>] __rpm_callback+0x48/0x7c [<ffffffc00078217c>] rpm_callback+0xa8/0xd4 [<ffffffc000786234>] rpm_suspend+0x84/0x758 [<ffffffc000786ca4>] rpm_idle+0x2c8/0x498 [<ffffffc000786ed4>] __pm_runtime_idle+0x60/0xac [<ffffffc00080eba8>] usb_autopm_put_interface+0x6c/0x7c [<ffffffc000803798>] hub_event+0x10ac/0x12ac [<ffffffc000249bb8>] process_one_work+0x390/0x6b8 [<ffffffc00024abcc>] worker_thread+0x480/0x610 [<ffffffc000251a80>] kthread+0x164/0x178 [<ffffffc0002045d0>] ret_from_fork+0x10/0x40 kick_hub_wq() is called from hub_activate() even after failures to communicate with the hub. This results in an endless sequence of hub event -> hub activate -> wq trigger -> hub event -> ... Provide two solutions for the problem. - Only trigger the hub event queue if communication with the hub is successful. - After a suspend failure, only resume already suspended interfaces if the communication with the device is still possible. Each of the changes fixes the observed problem. Use both to improve robustness. Acked-by:
-
Gerd Hoffmann authored
On a loaded virtualization host (dozen guests booting at the same time) it may happen that the ohci controller emulation doesn't manage to do timely frame processing, with the result that the io watchdog fires and considers the controller being dead, even though it's only the emulation being unusual slow due to the load peak. So, add a quirk for qemu and don't use the watchdog in case we figure we are running on emulated ohci. The virtual ohci controller masquerades as apple ohci controller, but we can identify it by subsystem id. Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Signed-off-by:
-
- 17 Mar, 2017 17 commits
-
-
Yoshihiro Shimoda authored
This patch sets hcd->phy from own phy context to avoid phy_get() in usb_add_hcd(). Since core/hcd.c manages the phy only in usb_add_hcd() and usb_remove_hcd(), there is difficult to manage the phy in suspend/resume. Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by:
-
Yoshihiro Shimoda authored
This patch sets hcd->phy from own phy context to avoid phy_get() in usb_add_hcd(). Since core/hcd.c manages the phy only in usb_add_hcd() and usb_remove_hcd(), there is difficult to manage the phy in suspend/resume. Signed-off-by:
-
Gregory CLEMENT authored
Armada 37xx SoC embedded an EHCI controller. This patch adds the device tree node enabling its support. Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
-
Gregory CLEMENT authored
The mvebu ARM64 SoCs no longer select PLAT_ORION. However Armada 37xx use the Orion EHCI controller. This patch allows the Orion EHCI driver to be built when ARCH_MVEBU is selected. Reviewed-by:
-
Hua Jing authored
- Add a new compatible string for the Armada 3700 SoCs - add sbuscfg support for orion usb controller driver. For the SoCs without hlock, need to program BAWR/BARD/AHBBRST fields in the sbuscfg register to guarantee the AHB master's burst would not overrun or underrun the FIFO. - the sbuscfg register has to be set after the usb controller reset, otherwise the value would be overridden to 0. In order to do this, the reset callback is registered. [gregory.clement@free-electrons.com: - reword commit and comments - fix error path in ehci_orion_drv_reset() - fix checkpatch warning] Signed-off-by:
Hua Jing <jinghua@marvell.com> Signed-off-by:
Rob Herring <robh@kernel.org> Acked-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
Elena Reshetova <elena.reshetova@intel.com> Signed-off-by:
Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
David Windsor <dwindsor@gmail.com> Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Jiri Slaby authored
After commit d705ff38 (tty: vt, cleanup and document con_scroll), in the coccinelle output, we can see: drivers/usb/misc/sisusbvga/sisusb_con.c:852:8-9: WARNING: return of 0/1 in function 'sisusbcon_scroll_area' with return type bool Return true instead of 1 in the function returning bool which was intended to do in d705ff38 but omitted. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Fixes: d705ff38 (tty: vt, cleanup and document con_scroll) Cc: Thomas Winischhofer <thomas@winischhofer.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Cc: cocci@systeme.lip6.fr Signed-off-by:
-
Pierre-Yves Kerbrat authored
Remove the useless variable 'partial' storing the actual length transferred. Nothing was done with it, so simply get rid of it as usb_stor_bulk_transfer_buf can handle having NULL instead. This also fixes the following sparse issues (-Wtypesign): drivers/usb/storage/karma.c:122:51: warning: incorrect type in argument 5 (different signedness) drivers/usb/storage/karma.c:122:51: expected unsigned int *act_len drivers/usb/storage/karma.c:122:51: got int *<noident> drivers/usb/storage/karma.c:127:52: warning: incorrect type in argument 5 (different signedness) drivers/usb/storage/karma.c:127:52: expected unsigned int *act_len drivers/usb/storage/karma.c:127:52: got int *<noident> Signed-off-by:
Pierre-Yves Kerbrat <pkerbrat@free.fr> Acked-by:
-
Milian Reichardt authored
Changed the location of '*' to fit the current coding style and easy readability. Signed-of-by:
Milian Reichardt <mreichardt95@gmail.com> Signed-off-by:
-
Milian Reichardt authored
Added a Space after ',' to get rid of an error message in checkpatch.pl and improve readability Signed-of-by:
-
Milian Reichardt authored
Fixed ERROR: Use 4 digit octal (0777) not decimal permissions to fulfill the current coding-style. Signed-of-by:
-
Gustavo A. R. Silva authored
'val' is an unsigned variable, and less-than-zero comparison of an unsigned variable is never true. Addresses-Coverity-ID: 1230257 Signed-off-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Reviewed-by:
Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by:
-
Yoshihiro Shimoda authored
This patch fixes an issue that a usb 1.1 device is not connected in system resume and then the following message appeared if debug messages are enabled: usb 2-1: Waited 2000ms for CONNECT To resolve this issue, the EHCI controller must be resumed after its companion controllers. So, this patch adds such code on the driver. Signed-off-by:
-
Yoshihiro Shimoda authored
EHCI controllers will have a companion controller. However, on platform bus, there was difficult to bind them in previous code. So, this patch adds helper functions to bind them using a "companion" property. Signed-off-by:
-
Jonathan Dieter authored
GCC 7 now warns when switch statements fall through implicitly, and with -Werror enabled in configure.ac, that makes these tools unbuildable. We fix this by notifying the compiler that this particular case statement is meant to fall through. Reviewed-by:
Jonathan Dieter <jdieter@lesbg.com> Signed-off-by:
-
