1. 16 Dec, 2011 2 commits
  2. 13 Dec, 2011 26 commits
    • Tejun Heo's avatar
      block, cfq: move icq creation and rq->elv.icq association to block core · f1f8cc94
      Tejun Heo authored
      Now block layer knows everything necessary to create and associate
      icq's with requests.  Move ioc_create_icq() to blk-ioc.c and update
      get_request() such that, if elevator_type->icq_size is set, requests
      are automatically associated with their matching icq's before
      elv_set_request().  io_context reference is also managed by block core
      on request alloc/free.
      
      * Only ioprio/cgroup changed handling remains from cfq_get_cic().
        Collapsed into cfq_set_request().
      
      * This removes queue kicking on icq allocation failure (for now).  As
        icq allocation failure is rare and the only effect of queue kicking
        achieved was possibily accelerating queue processing, this change
        shouldn't be noticeable.
      
        There is a larger underlying problem.  Unlike request allocation,
        icq allocation is not guaranteed to succeed eventually after
        retries.  The number of icq is unbound and thus mempool can't be the
        solution either.  This effectively adds allocation dependency on
        memory free path and thus possibility of deadlock.
      
        This usually wouldn't happen because icq allocation is not a hot
        path and, even when the condition triggers, it's highly unlikely
        that none of the writeback workers already has icq.
      
        However, this is still possible especially if elevator is being
        switched under high memory pressure, so we better get it fixed.
        Probably the only solution is just bypassing elevator and appending
        to dispatch queue on any elevator allocation failure.
      
      * Comment added to explain how icq's are managed and synchronized.
      
      This completes cleanup of io_context interface.
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      f1f8cc94
    • Tejun Heo's avatar
      block, cfq: restructure io_cq creation path for io_context interface cleanup · 9b84cacd
      Tejun Heo authored
      Add elevator_ops->elevator_init_icq_fn() and restructure
      cfq_create_cic() and rename it to ioc_create_icq().
      
      The new function expects its caller to pass in io_context, uses
      elevator_type->icq_cache, handles generic init, calls the new elevator
      operation for elevator specific initialization, and returns pointer to
      created or looked up icq.  This leaves cfq_icq_pool variable without
      any user.  Removed.
      
      This prepares for io_context interface cleanup and doesn't introduce
      any functional difference.
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      9b84cacd
    • Tejun Heo's avatar
      block, cfq: move io_cq exit/release to blk-ioc.c · 7e5a8794
      Tejun Heo authored
      With kmem_cache managed by blk-ioc, io_cq exit/release can be moved to
      blk-ioc too.  The odd ->io_cq->exit/release() callbacks are replaced
      with elevator_ops->elevator_exit_icq_fn() with unlinking from both ioc
      and q, and freeing automatically handled by blk-ioc.  The elevator
      operation only need to perform exit operation specific to the elevator
      - in cfq's case, exiting the cfqq's.
      
      Also, clearing of io_cq's on q detach is moved to block core and
      automatically performed on elevator switch and q release.
      
      Because the q io_cq points to might be freed before RCU callback for
      the io_cq runs, blk-ioc code should remember to which cache the io_cq
      needs to be freed when the io_cq is released.  New field
      io_cq->__rcu_icq_cache is added for this purpose.  As both the new
      field and rcu_head are used only after io_cq is released and the
      q/ioc_node fields aren't, they are put into unions.
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      7e5a8794
    • Tejun Heo's avatar
      block, cfq: move icq cache management to block core · 3d3c2379
      Tejun Heo authored
      Let elevators set ->icq_size and ->icq_align in elevator_type and
      elv_register() and elv_unregister() respectively create and destroy
      kmem_cache for icq.
      
      * elv_register() now can return failure.  All callers updated.
      
      * icq caches are automatically named "ELVNAME_io_cq".
      
      * cfq_slab_setup/kill() are collapsed into cfq_init/exit().
      
      * While at it, minor indentation change for iosched_cfq.elevator_name
        for consistency.
      
      This will help moving icq management to block core.  This doesn't
      introduce any functional change.
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      3d3c2379
    • Tejun Heo's avatar
      block, cfq: move io_cq lookup to blk-ioc.c · 47fdd4ca
      Tejun Heo authored
      Now that all io_cq related data structures are in block core layer,
      io_cq lookup can be moved from cfq-iosched.c to blk-ioc.c.
      
      Lookup logic from cfq_cic_lookup() is moved to ioc_lookup_icq() with
      parameter return type changes (cfqd -> request_queue, cfq_io_cq ->
      io_cq) and cfq_cic_lookup() becomes thin wrapper around
      cfq_cic_lookup().
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      47fdd4ca
    • Tejun Heo's avatar
      block, cfq: move cfqd->icq_list to request_queue and add request->elv.icq · a612fddf
      Tejun Heo authored
      Most of icq management is about to be moved out of cfq into blk-ioc.
      This patch prepares for it.
      
      * Move cfqd->icq_list to request_queue->icq_list
      
      * Make request explicitly point to icq instead of through elevator
        private data.  ->elevator_private[3] is replaced with sub struct elv
        which contains icq pointer and priv[2].  cfq is updated accordingly.
      
      * Meaningless clearing of ->elevator_private[0] removed from
        elv_set_request().  At that point in code, the field was guaranteed
        to be %NULL anyway.
      
      This patch doesn't introduce any functional change.
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      a612fddf
    • Tejun Heo's avatar
      block, cfq: reorganize cfq_io_context into generic and cfq specific parts · c5869807
      Tejun Heo authored
      Currently io_context and cfq logics are mixed without clear boundary.
      Most of io_context is independent from cfq but cfq_io_context handling
      logic is dispersed between generic ioc code and cfq.
      
      cfq_io_context represents association between an io_context and a
      request_queue, which is a concept useful outside of cfq, but it also
      contains fields which are useful only to cfq.
      
      This patch takes out generic part and put it into io_cq (io
      context-queue) and the rest into cfq_io_cq (cic moniker remains the
      same) which contains io_cq.  The following changes are made together.
      
      * cfq_ttime and cfq_io_cq now live in cfq-iosched.c.
      
      * All related fields, functions and constants are renamed accordingly.
      
      * ioc->ioc_data is now "struct io_cq *" instead of "void *" and
        renamed to icq_hint.
      
      This prepares for io_context API cleanup.  Documentation is currently
      sparse.  It will be added later.
      
      Changes in this patch are mechanical and don't cause functional
      change.
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      c5869807
    • Tejun Heo's avatar
      block: remove elevator_queue->ops · 22f746e2
      Tejun Heo authored
      elevator_queue->ops points to the same ops struct ->elevator_type.ops
      is pointing to.  The only effect of caching it in elevator_queue is
      shorter notation - it doesn't save any indirect derefence.
      
      Relocate elevator_type->list which used only during module init/exit
      to the end of the structure, rename elevator_queue->elevator_type to
      ->type, and replace elevator_queue->ops with elevator_queue->type.ops.
      
      This doesn't introduce any functional difference.
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      22f746e2
    • Tejun Heo's avatar
      block: reorder elevator switch sequence · f8fc877d
      Tejun Heo authored
      Elevator switch sequence first attached the new elevator, then tried
      registering it (sysfs) and if that failed attached back the old
      elevator.  However, sysfs registration doesn't require the elevator to
      be attached, so there is no reason to do the "detach, attach new,
      register, maybe re-attach old" sequence.  It can just do "register,
      detach, attach".
      
      * elevator_init_queue() is updated to set ->elevator_data directly and
        return 0 / -errno.  This allows elevator_exit() on an unattached
        elevator.
      
      * __elv_unregister_queue() which was necessary to unregister
        unattached q is removed in favor of __elv_register_queue() which can
        register unattached q.
      
      * elevator_attach() becomes a single assignment and obscures more then
        it helps.  Dropped.
      
      This will help cleaning up io_context handling across elevator switch.
      
      This patch doesn't introduce visible behavior change.
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      f8fc877d
    • Tejun Heo's avatar
      block, cfq: replace current_io_context() with create_io_context() · f2dbd76a
      Tejun Heo authored
      When called under queue_lock, current_io_context() triggers lockdep
      warning if it hits allocation path.  This is because io_context
      installation is protected by task_lock which is not IRQ safe, so it
      triggers irq-unsafe-lock -> irq -> irq-safe-lock -> irq-unsafe-lock
      deadlock warning.
      
      Given the restriction, accessor + creator rolled into one doesn't work
      too well.  Drop current_io_context() and let the users access
      task->io_context directly inside queue_lock combined with explicit
      creation using create_io_context().
      
      Future ioc updates will further consolidate ioc access and the create
      interface will be unexported.
      
      While at it, relocate ioc internal interface declarations in blk.h and
      add section comments before and after.
      
      This patch does not introduce functional change.
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      f2dbd76a
    • Tejun Heo's avatar
      block, cfq: kill cic->key · 1238033c
      Tejun Heo authored
      Now that lazy paths are removed, cfqd_dead_key() is meaningless and
      cic->q can be used whereever cic->key is used.  Kill cic->key.
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      1238033c
    • Tejun Heo's avatar
      block, cfq: kill ioc_gone · b50b636b
      Tejun Heo authored
      Now that cic's are immediately unlinked under both locks, there's no
      need to count and drain cic's before module unload.  RCU callback
      completion is waited with rcu_barrier().
      
      While at it, remove residual RCU operations on cic_list.
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      b50b636b
    • Tejun Heo's avatar
      block, cfq: remove delayed unlink · b9a19208
      Tejun Heo authored
      Now that all cic's are immediately unlinked from both ioc and queue,
      lazy dropping from lookup path and trimming on elevator unregister are
      unnecessary.  Kill them and remove now unused elevator_ops->trim().
      
      This also leaves call_for_each_cic() without any user.  Removed.
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      b9a19208
    • Tejun Heo's avatar
      block, cfq: unlink cfq_io_context's immediately · b2efa052
      Tejun Heo authored
      cic is association between io_context and request_queue.  A cic is
      linked from both ioc and q and should be destroyed when either one
      goes away.  As ioc and q both have their own locks, locking becomes a
      bit complex - both orders work for removal from one but not from the
      other.
      
      Currently, cfq tries to circumvent this locking order issue with RCU.
      ioc->lock nests inside queue_lock but the radix tree and cic's are
      also protected by RCU allowing either side to walk their lists without
      grabbing lock.
      
      This rather unconventional use of RCU quickly devolves into extremely
      fragile convolution.  e.g. The following is from cfqd going away too
      soon after ioc and q exits raced.
      
       general protection fault: 0000 [#1] PREEMPT SMP
       CPU 2
       Modules linked in:
       [   88.503444]
       Pid: 599, comm: hexdump Not tainted 3.1.0-rc10-work+ #158 Bochs Bochs
       RIP: 0010:[<ffffffff81397628>]  [<ffffffff81397628>] cfq_exit_single_io_context+0x58/0xf0
       ...
       Call Trace:
        [<ffffffff81395a4a>] call_for_each_cic+0x5a/0x90
        [<ffffffff81395ab5>] cfq_exit_io_context+0x15/0x20
        [<ffffffff81389130>] exit_io_context+0x100/0x140
        [<ffffffff81098a29>] do_exit+0x579/0x850
        [<ffffffff81098d5b>] do_group_exit+0x5b/0xd0
        [<ffffffff81098de7>] sys_exit_group+0x17/0x20
        [<ffffffff81b02f2b>] system_call_fastpath+0x16/0x1b
      
      The only real hot path here is cic lookup during request
      initialization and avoiding extra locking requires very confined use
      of RCU.  This patch makes cic removal from both ioc and request_queue
      perform double-locking and unlink immediately.
      
      * From q side, the change is almost trivial as ioc->lock nests inside
        queue_lock.  It just needs to grab each ioc->lock as it walks
        cic_list and unlink it.
      
      * From ioc side, it's a bit more difficult because of inversed lock
        order.  ioc needs its lock to walk its cic_list but can't grab the
        matching queue_lock and needs to perform unlock-relock dancing.
      
        Unlinking is now wholly done from put_io_context() and fast path is
        optimized by using the queue_lock the caller already holds, which is
        by far the most common case.  If the ioc accessed multiple devices,
        it tries with trylock.  In unlikely cases of fast path failure, it
        falls back to full double-locking dance from workqueue.
      
      Double-locking isn't the prettiest thing in the world but it's *far*
      simpler and more understandable than RCU trick without adding any
      meaningful overhead.
      
      This still leaves a lot of now unnecessary RCU logics.  Future patches
      will trim them.
      
      -v2: Vivek pointed out that cic->q was being dereferenced after
           cic->release() was called.  Updated to use local variable @this_q
           instead.
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Cc: Vivek Goyal <vgoyal@redhat.com>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      b2efa052
    • Tejun Heo's avatar
      block, cfq: fix cic lookup locking · f1a4f4d3
      Tejun Heo authored
      * cfq_cic_lookup() may be called without queue_lock and multiple tasks
        can execute it simultaneously for the same shared ioc.  Nothing
        prevents them racing each other and trying to drop the same dead cic
        entry multiple times.
      
      * smp_wmb() in cfq_exit_cic() doesn't really do anything and nothing
        prevents cfq_cic_lookup() seeing stale cic->key.  This usually
        doesn't blow up because by the time cic is exited, all requests have
        been drained and new requests are terminated before going through
        elevator.  However, it can still be triggered by plug merge path
        which doesn't grab queue_lock and thus can't check DEAD state
        reliably.
      
      This patch updates lookup locking such that,
      
      * Lookup is always performed under queue_lock.  This doesn't add any
        more locking.  The only issue is cfq_allow_merge() which can be
        called from plug merge path without holding any lock.  For now, this
        is worked around by using cic of the request to merge into, which is
        guaranteed to have the same ioc.  For longer term, I think it would
        be best to separate out plug merge method from regular one.
      
      * Spurious ioc->lock locking around cic lookup hint assignment
        dropped.
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      f1a4f4d3
    • Tejun Heo's avatar
      block, cfq: fix race condition in cic creation path and tighten locking · 216284c3
      Tejun Heo authored
      cfq_get_io_context() would fail if multiple tasks race to insert cic's
      for the same association.  This patch restructures
      cfq_get_io_context() such that slow path insertion race is handled
      properly.
      
      Note that the restructuring also makes cfq_get_io_context() called
      under queue_lock and performs both ioc and cfqd insertions while
      holding both ioc and queue locks.  This is part of on-going locking
      tightening and will be used to simplify synchronization rules.
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      216284c3
    • Tejun Heo's avatar
      block, cfq: move ioc ioprio/cgroup changed handling to cic · dc86900e
      Tejun Heo authored
      ioprio/cgroup change was handled by marking the changed state in ioc
      and, on the following access to the ioc, performing RCU-protected
      iteration through all cic's grabbing the matching queue_lock.
      
      This patch moves the changed state to each cic.  When ioprio or cgroup
      changes, the respective bit is set on all cic's of the ioc and when
      each of those cic (not ioc) is accessed, change is applied for that
      specific ioc-queue pair.
      
      This also fixes the following two race conditions between setting and
      clearing of changed states.
      
      * Missing barrier between assign/load of ioprio and ioprio_changed
        allowed applying old ioprio.
      
      * Change requests could happen between application of change and
        clearing of changed variables.
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      dc86900e
    • Tejun Heo's avatar
      block, cfq: misc updates to cfq_io_context · 283287a5
      Tejun Heo authored
      Make the following changes to prepare for ioc/cic management cleanup.
      
      * Add cic->q so that ioc can determine the associated queue without
        querying cfq.  This will eventually replace ->key.
      
      * Factor out cfq_release_cic() from cic_free_func().  This function
        assumes that the caller handled locking.
      
      * Rename __cfq_exit_single_io_context() to cfq_exit_cic() and make it
        take only @cic.
      
      * Restructure cfq_cic_link() for future updates.
      
      This patch doesn't introduce any functional changes.
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      283287a5
    • Tejun Heo's avatar
      block: misc updates to blk_get_queue() · 09ac46c4
      Tejun Heo authored
      * blk_get_queue() is peculiar in that it returns 0 on success and 1 on
        failure instead of 0 / -errno or boolean.  Update it such that it
        returns %true on success and %false on failure.
      
      * Make sure the caller checks for the return value.
      
      * Separate out __blk_get_queue() which doesn't check whether @q is
        dead and put it in blk.h.  This will be used later.
      
      This patch doesn't introduce any functional changes.
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      09ac46c4
    • Tejun Heo's avatar
      block: make ioc get/put interface more conventional and fix race on alloction · 6e736be7
      Tejun Heo authored
      Ignoring copy_io() during fork, io_context can be allocated from two
      places - current_io_context() and set_task_ioprio().  The former is
      always called from local task while the latter can be called from
      different task.  The synchornization between them are peculiar and
      dubious.
      
      * current_io_context() doesn't grab task_lock() and assumes that if it
        saw %NULL ->io_context, it would stay that way until allocation and
        assignment is complete.  It has smp_wmb() between alloc/init and
        assignment.
      
      * set_task_ioprio() grabs task_lock() for assignment and does
        smp_read_barrier_depends() between "ioc = task->io_context" and "if
        (ioc)".  Unfortunately, this doesn't achieve anything - the latter
        is not a dependent load of the former.  ie, if ioc itself were being
        dereferenced "ioc->xxx", it would mean something (not sure what tho)
        but as the code currently stands, the dependent read barrier is
        noop.
      
      As only one of the the two test-assignment sequences is task_lock()
      protected, the task_lock() can't do much about race between the two.
      Nothing prevents current_io_context() and set_task_ioprio() allocating
      its own ioc for the same task and overwriting the other's.
      
      Also, set_task_ioprio() can race with exiting task and create a new
      ioc after exit_io_context() is finished.
      
      ioc get/put doesn't have any reason to be complex.  The only hot path
      is accessing the existing ioc of %current, which is simple to achieve
      given that ->io_context is never destroyed as long as the task is
      alive.  All other paths can happily go through task_lock() like all
      other task sub structures without impacting anything.
      
      This patch updates ioc get/put so that it becomes more conventional.
      
      * alloc_io_context() is replaced with get_task_io_context().  This is
        the only interface which can acquire access to ioc of another task.
        On return, the caller has an explicit reference to the object which
        should be put using put_io_context() afterwards.
      
      * The functionality of current_io_context() remains the same but when
        creating a new ioc, it shares the code path with
        get_task_io_context() and always goes through task_lock().
      
      * get_io_context() now means incrementing ref on an ioc which the
        caller already has access to (be that an explicit refcnt or implicit
        %current one).
      
      * PF_EXITING inhibits creation of new io_context and once
        exit_io_context() is finished, it's guaranteed that both ioc
        acquisition functions return %NULL.
      
      * All users are updated.  Most are trivial but
        smp_read_barrier_depends() removal from cfq_get_io_context() needs a
        bit of explanation.  I suppose the original intention was to ensure
        ioc->ioprio is visible when set_task_ioprio() allocates new
        io_context and installs it; however, this wouldn't have worked
        because set_task_ioprio() doesn't have wmb between init and install.
        There are other problems with this which will be fixed in another
        patch.
      
      * While at it, use NUMA_NO_NODE instead of -1 for wildcard node
        specification.
      
      -v2: Vivek spotted contamination from debug patch.  Removed.
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Cc: Vivek Goyal <vgoyal@redhat.com>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      6e736be7
    • Tejun Heo's avatar
      block: misc ioc cleanups · 42ec57a8
      Tejun Heo authored
      * int return from put_io_context() wasn't used by anybody.  Make it
        return void like other put functions and docbook-fy the function
        comment.
      
      * Reorder dummy declarations for !CONFIG_BLOCK case a bit.
      
      * Make alloc_ioc_context() use __GFP_ZERO allocation, take init out of
        if block and drop 0'ing.
      
      * Docbook-fy current_io_context() comment.
      
      This patch doesn't introduce any functional change.
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      42ec57a8
    • Tejun Heo's avatar
      block, cfq: move cfqd->cic_index to q->id · a73f730d
      Tejun Heo authored
      cfq allocates per-queue id using ida and uses it to index cic radix
      tree from io_context.  Move it to q->id and allocate on queue init and
      free on queue release.  This simplifies cfq a bit and will allow for
      further improvements of io context life-cycle management.
      
      This patch doesn't introduce any functional difference.
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      a73f730d
    • Tejun Heo's avatar
      block: add missing blk_queue_dead() checks · 8ba61435
      Tejun Heo authored
      blk_insert_cloned_request(), blk_execute_rq_nowait() and
      blk_flush_plug_list() either didn't check whether the queue was dead
      or did it without holding queue_lock.  Update them so that dead state
      is checked while holding queue_lock.
      
      AFAICS, this plugs all holes (requeue doesn't matter as the request is
      transitioning atomically from in_flight to queued).
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      8ba61435
    • Tejun Heo's avatar
      block: fix drain_all condition in blk_drain_queue() · 481a7d64
      Tejun Heo authored
      When trying to drain all requests, blk_drain_queue() checked only
      q->rq.count[]; however, this only tracks REQ_ALLOCED requests.  This
      patch updates blk_drain_queue() such that it looks at all the counters
      and queues so that request_queue is actually empty on completion.
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      481a7d64
    • Tejun Heo's avatar
      block: add blk_queue_dead() · 34f6055c
      Tejun Heo authored
      There are a number of QUEUE_FLAG_DEAD tests.  Add blk_queue_dead()
      macro and use it.
      
      This patch doesn't introduce any functional difference.
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      34f6055c
    • Tejun Heo's avatar
      block, sx8: kill blk_insert_request() · 1ba64ede
      Tejun Heo authored
      The only user left for blk_insert_request() is sx8 and it can be
      trivially switched to use blk_execute_rq_nowait() - special requests
      aren't included in io stat and sx8 doesn't use block layer tagging.
      Switch sx8 and kill blk_insert_requeset().
      
      This patch doesn't introduce any functional difference.
      
      Only compile tested.
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Acked-by: default avatarJeff Garzik <jgarzik@pobox.com>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      1ba64ede
  3. 09 Dec, 2011 12 commits