- 13 Mar, 2019 6 commits
-
-
Steve Twiss authored
The mutex for the regulator_dev must be controlled by the caller of the regulator_notifier_call_chain(), as described in the comment for that function. Failure to mutex lock and unlock surrounding the notifier call results in a kernel WARN_ON_ONCE() which will dump a backtrace for the regulator_notifier_call_chain() when that function call is first made. The mutex can be controlled using the regulator_lock/unlock() API. Fixes: c90456e3 ("regulator: pv88090: new regulator driver") Suggested-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Steve Twiss authored
The mutex for the regulator_dev must be controlled by the caller of the regulator_notifier_call_chain(), as described in the comment for that function. Failure to mutex lock and unlock surrounding the notifier call results in a kernel WARN_ON_ONCE() which will dump a backtrace for the regulator_notifier_call_chain() when that function call is first made. The mutex can be controlled using the regulator_lock/unlock() API. Fixes: 99cf3af5 ("regulator: pv88080: new regulator driver") Suggested-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Steve Twiss authored
The mutex for the regulator_dev must be controlled by the caller of the regulator_notifier_call_chain(), as described in the comment for that function. Failure to mutex lock and unlock surrounding the notifier call results in a kernel WARN_ON_ONCE() which will dump a backtrace for the regulator_notifier_call_chain() when that function call is first made. The mutex can be controlled using the regulator_lock/unlock() API. Fixes: 4068e518 ("regulator: da9062: DA9062 regulator driver") Suggested-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Steve Twiss authored
The mutex for the regulator_dev must be controlled by the caller of the regulator_notifier_call_chain(), as described in the comment for that function. Failure to mutex lock and unlock surrounding the notifier call results in a kernel WARN_ON_ONCE() which will dump a backtrace for the regulator_notifier_call_chain() when that function call is first made. The mutex can be controlled using the regulator_lock/unlock() API. Fixes: f6130be6 ("regulator: DA9055 regulator driver") Suggested-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Axel Lin authored
gpio_regulator_voltage_ops and gpio_regulator_current_ops should never change, make them const. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Axel Lin authored
Use devm_regulator_register to simplify the code. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 11 Mar, 2019 4 commits
-
-
Axel Lin authored
Use WM8400_DC2_ENA_MASK for DCDC2 enable_mask. The define is the same as WM8400_DC1_ENA_MASK, just a cleanup. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Axel Lin authored
The only user of wm8400_block_read/wm8400_set_bits functions is the wm8400 regulator driver. At the context of all the callers, we can use regmap_bulk_read/regmap_update_bits directly. Thus remove wm8400_block_read/wm8400_set_bits functions. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Axel Lin authored
Current code is using devm_regulator_register() so it is not necessary to save reg->rdev for clean up. Remove *rdev from struct ab3100_regulator, then ab3100_regulators_remove() can be removed as well. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Axel Lin authored
This driver is using devm_regulator_register() so it is not necessary to save *rdev for clean up. Actually the pmic->rdev[id] is not used now. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 04 Mar, 2019 6 commits
-
-
Mark Brown authored
-
Mark Brown authored
-
Axel Lin authored
These regulator_ops variables should never change, make them const. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Axel Lin authored
The palmas_smps_ramp_delay array should never modify, make it const. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Axel Lin authored
Use regulator_set/get_current_limit_regmap helpers to save some code. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Axel Lin authored
Use regulator_set/get_current_limit_regmap helpers to save some code. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Steve Twiss <stwiss.opensource@diasemi.com>; Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 03 Mar, 2019 12 commits
-
-
Axel Lin authored
Use regulator_set/get_current_limit_regmap helpers to save some code. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Axel Lin authored
Use regulator_set/get_current_limit_regmap helpers to save some code. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Mark Brown authored
Merge branch 'for-5.0' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator into regulator-5.1
-
Axel Lin authored
Use regulator_set/get_current_limit_regmap helpers to save some code. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Axel Lin authored
Use regulator_set/get_current_limit_regmap helpers to save some code. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Axel Lin authored
Use regulator_set/get_current_limit_regmap helpers to save some code. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Axel Lin authored
Use regulator_set/get_current_limit_regmap helpers to save some code. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Axel Lin authored
Use regulator_set/get_current_limit_regmap helpers to save some code. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Axel Lin authored
By setting curr_table, n_current_limits, csel_reg and csel_mask, the regmap users can use regulator_set_current_limit_regmap and regulator_get_current_limit_regmap for set/get_current_limit callbacks. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Axel Lin authored
The csel_reg and csel_mask fields in struct regulator_desc needs to be generic for drivers. Not just for TPS65218. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM SoC fixes from Arnd Bergmann: "One more set of simple ARM platform fixes: - A boot regression on qualcomm msm8998 - Gemini display controllers got turned off by accident - incorrect reference counting in optee" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: tee: optee: add missing of_node_put after of_device_is_available arm64: dts: qcom: msm8998: Extend TZ reserved memory area ARM: dts: gemini: Re-enable display controller
-
- 02 Mar, 2019 11 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "Two last minute fixes: - Prevent value evaluation via functions happening in the user access enabled region of __put_user() (put another way: make sure to evaluate the value to be stored in user space _before_ enabling user space accesses) - Correct the definition of a Hyper-V hypercall constant" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/hyper-v: Fix definition of HV_MAX_FLUSH_REP_COUNT x86/uaccess: Don't leak the AC flag into __put_user() value evaluation
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Nine small fixes. The resume fix is a cosmetic removal of a warning with an incorrect condition causing it to alarm people wrongly. The other eight patches correct a thinko in Christoph Hellwig's DMA conversion series. Without it all these drivers end up with 32 bit DMA masks meaning they bounce any page over 4GB before sending it to the controller. Nowadays, even laptops mostly have memory above 4GB, so this can lead to significant performance degradation with all the bouncing" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: core: Avoid that system resume triggers a kernel warning scsi: hptiop: fix calls to dma_set_mask() scsi: hisi_sas: fix calls to dma_set_mask_and_coherent() scsi: csiostor: fix calls to dma_set_mask_and_coherent() scsi: bfa: fix calls to dma_set_mask_and_coherent() scsi: aic94xx: fix calls to dma_set_mask_and_coherent() scsi: 3w-sas: fix calls to dma_set_mask_and_coherent() scsi: 3w-9xxx: fix calls to dma_set_mask_and_coherent() scsi: lpfc: fix calls to dma_set_mask_and_coherent()
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix refcount leak in act_ipt during replace, from Davide Caratti. 2) Set task state properly in tun during blocking reads, from Timur Celik. 3) Leaked reference in DSA, from Wen Yang. 4) NULL deref in act_tunnel_key, from Vlad Buslov. 5) cipso_v4_erro can reference the skb IPCB in inappropriate contexts thus referencing garbage, from Nazarov Sergey. 6) Don't accept RTA_VIA and RTA_GATEWAY in contexts where those attributes make no sense. 7) Fix hung sendto in tipc, from Tung Nguyen. 8) Out-of-bounds access in netlabel, from Paul Moore. 9) Grant reference leak in xen-netback, from Igor Druzhinin. 10) Fix tx stalls with lan743x, from Bryan Whitehead. 11) Fix interrupt storm with mv88e6xxx, from Hein Kallweit. 12) Memory leak in sit on device registry failure, from Mao Wenan. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits) net: sit: fix memory leak in sit_init_net() net: dsa: mv88e6xxx: Fix statistics on mv88e6161 geneve: correctly handle ipv6.disable module parameter net: dsa: mv88e6xxx: prevent interrupt storm caused by mv88e6390x_port_set_cmode bpf: fix sanitation rewrite in case of non-pointers ipv4: Add ICMPv6 support when parse route ipproto MIPS: eBPF: Fix icache flush end address lan743x: Fix TX Stall Issue net: phy: phylink: fix uninitialized variable in phylink_get_mac_state net: aquantia: regression on cpus with high cores: set mode with 8 queues selftests: fixes for UDP GRO bpf: drop refcount if bpf_map_new_fd() fails in map_create() net: dsa: mv88e6xxx: power serdes on/off for 10G interfaces on 6390X net: dsa: mv88e6xxx: Fix u64 statistics xen-netback: don't populate the hash cache on XenBus disconnect xen-netback: fix occasional leak of grant ref mappings under memory pressure sctp: chunk.c: correct format string for size_t in printk net: netem: fix skb length BUG_ON in __skb_to_sgvec netlabel: fix out-of-bounds memory accesses ipv4: Pass original device to ip_rcv_finish_core ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull more crypto fixes from Herbert Xu: "This fixes a couple of issues in arm64/chacha that was introduced in 5.0" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: arm64/chacha - fix hchacha_block_neon() for big endian crypto: arm64/chacha - fix chacha_4block_xor_neon() for big endian
-
Mao Wenan authored
If register_netdev() is failed to register sitn->fb_tunnel_dev, it will go to err_reg_dev and forget to free netdev(sitn->fb_tunnel_dev). BUG: memory leak unreferenced object 0xffff888378daad00 (size 512): comm "syz-executor.1", pid 4006, jiffies 4295121142 (age 16.115s) hex dump (first 32 bytes): 00 e6 ed c0 83 88 ff ff 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000d6dcb63e>] kvmalloc include/linux/mm.h:577 [inline] [<00000000d6dcb63e>] kvzalloc include/linux/mm.h:585 [inline] [<00000000d6dcb63e>] netif_alloc_netdev_queues net/core/dev.c:8380 [inline] [<00000000d6dcb63e>] alloc_netdev_mqs+0x600/0xcc0 net/core/dev.c:8970 [<00000000867e172f>] sit_init_net+0x295/0xa40 net/ipv6/sit.c:1848 [<00000000871019fa>] ops_init+0xad/0x3e0 net/core/net_namespace.c:129 [<00000000319507f6>] setup_net+0x2ba/0x690 net/core/net_namespace.c:314 [<0000000087db4f96>] copy_net_ns+0x1dc/0x330 net/core/net_namespace.c:437 [<0000000057efc651>] create_new_namespaces+0x382/0x730 kernel/nsproxy.c:107 [<00000000676f83de>] copy_namespaces+0x2ed/0x3d0 kernel/nsproxy.c:165 [<0000000030b74bac>] copy_process.part.27+0x231e/0x6db0 kernel/fork.c:1919 [<00000000fff78746>] copy_process kernel/fork.c:1713 [inline] [<00000000fff78746>] _do_fork+0x1bc/0xe90 kernel/fork.c:2224 [<000000001c2e0d1c>] do_syscall_64+0xc8/0x580 arch/x86/entry/common.c:290 [<00000000ec48bd44>] entry_SYSCALL_64_after_hwframe+0x49/0xbe [<0000000039acff8a>] 0xffffffffffffffff Signed-off-by: Mao Wenan <maowenan@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
Despite what the datesheet says, the silicon implements the older way of snapshoting the statistics. Change the op. Reported-by: Chris.Healy@zii.aero Tested-by: Chris.Healy@zii.aero Fixes: 0ac64c39 ("net: dsa: mv88e6xxx: mv88e6161 uses mv88e6320 stats snapshot") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Benc authored
When IPv6 is compiled but disabled at runtime, geneve_sock_add returns -EAFNOSUPPORT. For metadata based tunnels, this causes failure of the whole operation of bringing up the tunnel. Ignore failure of IPv6 socket creation for metadata based tunnels caused by IPv6 not being available. This is the same fix as what commit d074bf96 ("vxlan: correctly handle ipv6.disable module parameter") is doing for vxlan. Note there's also commit c0a47e44 ("geneve: should not call rt6_lookup() when ipv6 was disabled") which fixes a similar issue but for regular tunnels, while this patch is needed for metadata based tunnels. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Alexei Starovoitov says: ==================== pull-request: bpf 2019-03-01 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) fix sanitation rewrite, from Daniel. 2) fix error path on map_new_fd, from Peng. 3) fix icache flush address, from Paul. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
When debugging another issue I faced an interrupt storm in this driver (88E6390, port 9 in SGMII mode), consisting of alternating link-up / link-down interrupts. Analysis showed that the driver wanted to set a cmode that was set already. But so far mv88e6390x_port_set_cmode() doesn't check this and powers down SERDES, what causes the link to break, and eventually results in the described interrupt storm. Fix this by checking whether the cmode actually changes. We want that the very first call to mv88e6390x_port_set_cmode() always configures the registers, therefore initialize port.cmode with a value that is different from any supported cmode value. We have to take care that we only init the ports cmode once chip->info->num_ports is set. v2: - add small helper and init the number of actual ports only Fixes: 364e9d77 ("net: dsa: mv88e6xxx: Power on/off SERDES on cmode change") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
Marek reported that he saw an issue with the below snippet in that timing measurements where off when loaded as unpriv while results were reasonable when loaded as privileged: [...] uint64_t a = bpf_ktime_get_ns(); uint64_t b = bpf_ktime_get_ns(); uint64_t delta = b - a; if ((int64_t)delta > 0) { [...] Turns out there is a bug where a corner case is missing in the fix d3bd7413 ("bpf: fix sanitation of alu op with pointer / scalar type from different paths"), namely fixup_bpf_calls() only checks whether aux has a non-zero alu_state, but it also needs to test for the case of BPF_ALU_NON_POINTER since in both occasions we need to skip the masking rewrite (as there is nothing to mask). Fixes: d3bd7413 ("bpf: fix sanitation of alu op with pointer / scalar type from different paths") Reported-by: Marek Majkowski <marek@cloudflare.com> Reported-by: Arthur Fabre <afabre@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/netdev/CAJPywTJqP34cK20iLM5YmUMz9KXQOdu1-+BZrGMAGgLuBWz7fg@mail.gmail.com/T/Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Hangbin Liu authored
For ip rules, we need to use 'ipproto ipv6-icmp' to match ICMPv6 headers. But for ip -6 route, currently we only support tcp, udp and icmp. Add ICMPv6 support so we can match ipv6-icmp rules for route lookup. v2: As David Ahern and Sabrina Dubroca suggested, Add an argument to rtm_getroute_parse_ip_proto() to handle ICMP/ICMPv6 with different family. Reported-by: Jianlin Shi <jishi@redhat.com> Fixes: eacb9384 ("ipv6: support sport, dport and ip_proto in RTM_GETROUTE") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 01 Mar, 2019 1 commit
-
-
Paul Burton authored
The MIPS eBPF JIT calls flush_icache_range() in order to ensure the icache observes the code that we just wrote. Unfortunately it gets the end address calculation wrong due to some bad pointer arithmetic. The struct jit_ctx target field is of type pointer to u32, and as such adding one to it will increment the address being pointed to by 4 bytes. Therefore in order to find the address of the end of the code we simply need to add the number of 4 byte instructions emitted, but we mistakenly add the number of instructions multiplied by 4. This results in the call to flush_icache_range() operating on a memory region 4x larger than intended, which is always wasteful and can cause crashes if we overrun into an unmapped page. Fix this by correcting the pointer arithmetic to remove the bogus multiplication, and use braces to remove the need for a set of brackets whilst also making it obvious that the target field is a pointer. Signed-off-by: Paul Burton <paul.burton@mips.com> Fixes: b6bd53f9 ("MIPS: Add missing file for eBPF JIT.") Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Song Liu <songliubraving@fb.com> Cc: Yonghong Song <yhs@fb.com> Cc: netdev@vger.kernel.org Cc: bpf@vger.kernel.org Cc: linux-mips@vger.kernel.org Cc: stable@vger.kernel.org # v4.13+ Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-