- 16 May, 2014 26 commits
-
-
David S. Miller authored
Vlad Yasevich says: ==================== bridge: Non-promisc bridge ports support This series adds functionality to the bridge device to enable operations without setting all ports to promiscuous mode. The basic concept is this. The bridge keeps track of the ports that support learning and flooding packets to unknown destinations. We call these ports auto-discovery ports since they automatically discover who is behind them through learning and flooding. If flooding and learning are disabled via flags, then the port requires static configuration to tell it which mac addresses are behind it. This is accomplished through adding of fdbs. These fdbs should be static as dynamic fdbs can expire and systems will become unreachable due to lack of flooding. If the user marks all ports as needing static configuration then we can safely make them non-promiscuous since we will know all the information about them. If the user leaves only 1 port as automatic, then we can mark that port as not-promiscuous as well. One could think of this a edge relay similar to what's support by embedded switches in SRIOV devices. Since we have all the information about the other ports, we can just program the mac addresses into the single automatic port to receive all necessary traffic. More information about this is patch 6. In other cases, we keep all ports promiscuous as before. There are some other cases when promiscuous mode has to be turned back on. One is when the bridge itself if placed in promiscuous mode (user sets promisc flag). The other is if vlan filtering is turned off. Since this is the default configuration, the default bridge operation is not changed. Changes since v2: - White space and spelling fixes from Michael Tsirkin - Squash patches 6, 7 and 8 to prevent bisect breakage. Changes since v1: - Address issues rasied by Stephen Heminger - Address initializer comments raised by Sergey Shtylyov - Rebased recent net-next. Changes since rfc v2: - Better description of in the commit logs - Leave port in promiscuous mode if IFF_UNICAST_FLT is disabled on the device. - Fix issue with flag masking - Rework patch ordering a bit. Changes since rfc v1: - Removed private list. We now traverse the fdb hashtable itself to write necessary addresses to the ports (Stephen's concern) - Add learning flag to the mask for flags that decides if the port is 'auto' or not (suggest by MST and Jamal). - Simplified tracking of such ports at the cost of a loop over all ports (suggested by MST) I've played with quite a large number of ports and the current approach seems to work fairly well. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Vlad Yasevich authored
There exist configurations where the administrator or another management entity has the foreknowledge of all the mac addresses of end systems that are being bridged together. In these environments, the administrator can statically configure known addresses in the bridge FDB and disable flooding and learning on ports. This makes it possible to turn off promiscuous mode on the interfaces connected to the bridge. Here is why disabling flooding and learning allows us to control promiscuity: Consider port X. All traffic coming into this port from outside the bridge (ingress) will be either forwarded through other ports of the bridge (egress) or dropped. Forwarding (egress) is defined by FDB entries and by flooding in the event that no FDB entry exists. In the event that flooding is disabled, only FDB entries define the egress. Once learning is disabled, only static FDB entries provided by a management entity define the egress. If we provide information from these static FDBs to the ingress port X, then we'll be able to accept all traffic that can be successfully forwarded and drop all the other traffic sooner without spending CPU cycles to process it. Another way to define the above is as following equations: ingress = egress + drop expanding egress ingress = static FDB + learned FDB + flooding + drop disabling flooding and learning we a left with ingress = static FDB + drop By adding addresses from the static FDB entries to the MAC address filter of an ingress port X, we fully define what the bridge can process without dropping and can thus turn off promiscuous mode, thus dropping packets sooner. There have been suggestions that we may want to allow learning and update the filters with learned addresses as well. This would require mac-level authentication similar to 802.1x to prevent attacks against the hw filters as they are limited resource. Additionally, if the user places the bridge device in promiscuous mode, all ports are placed in promiscuous mode regardless of the changes to flooding and learning. Since the above functionality depends on full static configuration, we have also require that vlan filtering be enabled to take advantage of this. The reason is that the bridge has to be able to receive and process VLAN-tagged frames and the there are only 2 ways to accomplish this right now: promiscuous mode or vlan filtering. Suggested-by:Michael S. Tsirkin <mst@redhat.com> Acked-by:
Vlad Yasevich <vyasevic@redhat.com> Signed-off-by:
-
Vlad Yasevich authored
When a static fdb entry is created, add the mac address from this fdb entry to any ports that are currently running in non-promiscuous mode. These ports need this data so that they can receive traffic destined to these addresses. By default ports start in promiscuous mode, so this feature is disabled. Acked-by:
-
Vlad Yasevich authored
Introduce a BR_PROMISC per-port flag that will help us track if the current port is supposed to be in promiscuous mode or not. For now, always start in promiscuous mode. Acked-by:
-
Vlad Yasevich authored
Add code that allows static fdb entires to be synced to the hw list for a specified port. This will be used later to program ports that can function in non-promiscuous mode. Acked-by:
-
Vlad Yasevich authored
By default, ports on the bridge are capable of automatic discovery of nodes located behind the port. This is accomplished via flooding of unknown traffic (BR_FLOOD) and learning the mac addresses from these packets (BR_LEARNING). If the above functionality is disabled by turning off these flags, the port requires static configuration in the form of static FDB entries to function properly. This patch adds functionality to keep track of all ports capable of automatic discovery. This will later be used to control promiscuity settings. Acked-by:
-
Vlad Yasevich authored
Turn the flag change macro into a function to allow easier updates and to reduce space. Acked-by:
-
Jean Delvare authored
The pch_gbe driver is for a companion chip to the Intel Atom E600 series processors. These are 32-bit x86 processors so the driver is only needed on X86_32. Signed-off-by:
Jean Delvare <jdelvare@suse.de> Cc: Jiri Slaby <jslaby@suse.cz> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
-
Duan Jiong authored
When using command "ip tunnel add" to add a tunnel, the tunnel will be added twice, through ip_tunnel_create() and ip_tunnel_update(). Because the second is unnecessary, so we can just break after adding tunnel through ip_tunnel_create(). Signed-off-by:
Duan Jiong <duanj.fnst@cn.fujitsu.com> Signed-off-by:
-
Alexei Starovoitov authored
JITed seccomp filters can be quite large if they check a lot of syscalls Simply increase buffer size Signed-off-by:
Alexei Starovoitov <ast@plumgrid.com> Acked-by:
Daniel Borkmann <dborkman@redhat.com> Signed-off-by:
-
Alexei Starovoitov authored
seccomp filters use kernel JIT image addresses, so bpf_jit_enable=2 prints [ 20.146438] flen=3 proglen=82 pass=0 image=0000000000000000 [ 20.146442] JIT code: 00000000: 55 48 89 e5 48 81 ec 28 02 00 00 ... ignore image address, so that seccomp filters can be disassembled Signed-off-by:
-
David S. Miller authored
Florian Fainelli says: ==================== net: systemport: DMA and MAC fixes This patch series contains a critical fix in how the DMA unmapping of packet is done, as well as a less critical fix in how we disable the Ethernet MAC RX/TX functions. ==================== Signed-off-by: -
Florian Fainelli authored
When umac_enable_set() is used to disable the UniMAC receiver or transmitter, we need to make sure that we wait for a full-sized packet to be processed because the UniMAC hardware stops on a packet boundary, not immediately. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Florian Fainelli authored
dma_unmap_single() was called with dma_unmap_len(cb, dma_len), unfortunately we failed to assign this length field in bcm_sysport_rx_refill() or bcm_sysport_alloc_rx_bufs() using dma_unmap_len_set(). This causes packet contents corruption because are we not invoking the cache invalidation routines with the proper length. Fix this by using the full RX buffer size (RX_BUF_LENGTH) because the mappings for the RX bufers are created with that size. Signed-off-by:
-
David S. Miller authored
Veaceslav Falico says: ==================== bonding: simple macro cleanup Trivial patchset that converts most of the bonding's macros into inline functions. It introduces only one macro, BOND_MODE(), which is just bond->params.mode, better to write/understand/remember. The only real change is the removal of IFF_UP verification, which always came in pair with && netif_running(), and is though useless, as it's always IFF_UP when LINK_STATE_RUNNING. v2->v3: fix 3/9 to actually invert bond_mode_uses_arp() and add bond_uses_arp() alongside bond_mode_uses_arp() v1->v2: use inlined functions instead of macros. ==================== Signed-off-by: -
Veaceslav Falico authored
They're verifying the same thing (except of IFF_UP, which is implied for netif_running(), which is also a prerequisite). CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
Veaceslav Falico <vfalico@gmail.com> Signed-off-by:
-
Veaceslav Falico authored
CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
-
Veaceslav Falico authored
Also, remove the IFF_UP verification cause we can't be netif_running() with being also IFF_UP. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
-
Veaceslav Falico authored
Also, use standard IP primitives to check the address. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
-
Veaceslav Falico authored
CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
-
Veaceslav Falico authored
Change the name a bit to better reflect its scope, and update some comments. Two functions added - one which takes bond as a param and the other which takes the mode. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
-
Veaceslav Falico authored
Also, change its name to better reflect its scope, and skip the "no" part. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
-
Veaceslav Falico authored
Also, make it accept bonding as a parameter and change the name a bit to better reflect its scope. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
-
Veaceslav Falico authored
It's used only in an inline function and is useless. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
-
Kirill Tkhai authored
Using whole of allocated pages reduces requested skb->data size. This is just a little more thriftily allocation. netperf does not show difference with the current performance. Signed-off-by:
Kirill Tkhai <ktkhai@parallels.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
dingtianhong authored
The port->count was used to count the number of macvlan devs in the same port, but the list vlans could play the same role to do that, so free the port if the list vlans is empty and no need to use the parameter count. Signed-off-by:
Ding Tianhong <dingtianhong@huawei.com> Signed-off-by:
-
- 15 May, 2014 14 commits
-
-
Julia Lawall authored
Netdev_priv is an accessor function, and has no purpose if its result is not used. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ local idexpression x; @@ -x = netdev_priv(...); ... when != x // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Julia Lawall authored
Netdev_priv is an accessor function, and has no purpose if its result is not used. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ local idexpression x; @@ -x = netdev_priv(...); ... when != x // </smpl> Signed-off-by:
-
Julia Lawall authored
Netdev_priv is an accessor function, and has no purpose if its result is not used. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ local idexpression x; @@ -x = netdev_priv(...); ... when != x // </smpl> Signed-off-by:
-
Julia Lawall authored
Netdev_priv is an accessor function, and has no purpose if its result is not used. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ local idexpression x; @@ -x = netdev_priv(...); ... when != x // </smpl> Signed-off-by:
-
Florian Fainelli authored
Packets need to be at least 64 bytes to enter the switch port logic, including the FCS, otherwise they will be discarded as RUNT packets. With packets having Broadcom tags, the 4-bytes tag is first stripped off the packet, and the packet length is then checked, so we need to make sure that the packet length with FCS is at least 64 bytes. Signed-off-by:
-
Florian Fainelli authored
The link adjustment callback can be called as frequently as desired by the PHY library, as such, let's avoid doing a Read/Modify/Write sequence if nothing changed, which is more than likely since we are interfaced with a switch device. Signed-off-by:
-
Joe Perches authored
These should not have trailing semicolons so remove them. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
David S. Miller authored
Alexei Starovoitov says: ==================== internal BPF jit for x64 and JITed seccomp Internal BPF JIT compiler for x86_64 replaces classic BPF JIT. Use it in seccomp and in tracing filters (sent as separate patch) ==================== Signed-off-by: -
Alexei Starovoitov authored
Take advantage of internal BPF JIT 05-sim-long_jumps.c of libseccomp was used as micro-benchmark: seccomp_rule_add_exact(ctx,... seccomp_rule_add_exact(ctx,... rc = seccomp_load(ctx); for (i = 0; i < 10000000; i++) syscall(...); $ sudo sysctl net.core.bpf_jit_enable=1 $ time ./bench real 0m2.769s user 0m1.136s sys 0m1.624s $ sudo sysctl net.core.bpf_jit_enable=0 $ time ./bench real 0m5.825s user 0m1.268s sys 0m4.548s Signed-off-by: -
Alexei Starovoitov authored
Maps all internal BPF instructions into x86_64 instructions. This patch replaces original BPF x64 JIT with internal BPF x64 JIT. sysctl net.core.bpf_jit_enable is reused as on/off switch. Performance: 1. old BPF JIT and internal BPF JIT generate equivalent x86_64 code. No performance difference is observed for filters that were JIT-able before Example assembler code for BPF filter "tcpdump port 22" original BPF -> old JIT: original BPF -> internal BPF -> new JIT: 0: push %rbp 0: push %rbp 1: mov %rsp,%rbp 1: mov %rsp,%rbp 4: sub $0x60,%rsp 4: sub $0x228,%rsp 8: mov %rbx,-0x8(%rbp) b: mov %rbx,-0x228(%rbp) // prologue 12: mov %r13,-0x220(%rbp) 19: mov %r14,-0x218(%rbp) 20: mov %r15,-0x210(%rbp) 27: xor %eax,%eax // clear A c: xor %ebx,%ebx 29: xor %r13,%r13 // clear X e: mov 0x68(%rdi),%r9d 2c: mov 0x68(%rdi),%r9d 12: sub 0x6c(%rdi),%r9d 30: sub 0x6c(%rdi),%r9d 16: mov 0xd8(%rdi),%r8 34: mov 0xd8(%rdi),%r10 3b: mov %rdi,%rbx 1d: mov $0xc,%esi 3e: mov $0xc,%esi 22: callq 0xffffffffe1021e15 43: callq 0xffffffffe102bd75 27: cmp $0x86dd,%eax 48: cmp $0x86dd,%rax 2c: jne 0x0000000000000069 4f: jne 0x000000000000009a 2e: mov $0x14,%esi 51: mov $0x14,%esi 33: callq 0xffffffffe1021e31 56: callq 0xffffffffe102bd91 38: cmp $0x84,%eax 5b: cmp $0x84,%rax 3d: je 0x0000000000000049 62: je 0x0000000000000074 3f: cmp $0x6,%eax 64: cmp $0x6,%rax 42: je 0x0000000000000049 68: je 0x0000000000000074 44: cmp $0x11,%eax 6a: cmp $0x11,%rax 47: jne 0x00000000000000c6 6e: jne 0x0000000000000117 49: mov $0x36,%esi 74: mov $0x36,%esi 4e: callq 0xffffffffe1021e15 79: callq 0xffffffffe102bd75 53: cmp $0x16,%eax 7e: cmp $0x16,%rax 56: je 0x00000000000000bf 82: je 0x0000000000000110 58: mov $0x38,%esi 88: mov $0x38,%esi 5d: callq 0xffffffffe1021e15 8d: callq 0xffffffffe102bd75 62: cmp $0x16,%eax 92: cmp $0x16,%rax 65: je 0x00000000000000bf 96: je 0x0000000000000110 67: jmp 0x00000000000000c6 98: jmp 0x0000000000000117 69: cmp $0x800,%eax 9a: cmp $0x800,%rax 6e: jne 0x00000000000000c6 a1: jne 0x0000000000000117 70: mov $0x17,%esi a3: mov $0x17,%esi 75: callq 0xffffffffe1021e31 a8: callq 0xffffffffe102bd91 7a: cmp $0x84,%eax ad: cmp $0x84,%rax 7f: je 0x000000000000008b b4: je 0x00000000000000c2 81: cmp $0x6,%eax b6: cmp $0x6,%rax 84: je 0x000000000000008b ba: je 0x00000000000000c2 86: cmp $0x11,%eax bc: cmp $0x11,%rax 89: jne 0x00000000000000c6 c0: jne 0x0000000000000117 8b: mov $0x14,%esi c2: mov $0x14,%esi 90: callq 0xffffffffe1021e15 c7: callq 0xffffffffe102bd75 95: test $0x1fff,%ax cc: test $0x1fff,%rax 99: jne 0x00000000000000c6 d3: jne 0x0000000000000117 d5: mov %rax,%r14 9b: mov $0xe,%esi d8: mov $0xe,%esi a0: callq 0xffffffffe1021e44 dd: callq 0xffffffffe102bd91 // MSH e2: and $0xf,%eax e5: shl $0x2,%eax e8: mov %rax,%r13 eb: mov %r14,%rax ee: mov %r13,%rsi a5: lea 0xe(%rbx),%esi f1: add $0xe,%esi a8: callq 0xffffffffe1021e0d f4: callq 0xffffffffe102bd6d ad: cmp $0x16,%eax f9: cmp $0x16,%rax b0: je 0x00000000000000bf fd: je 0x0000000000000110 ff: mov %r13,%rsi b2: lea 0x10(%rbx),%esi 102: add $0x10,%esi b5: callq 0xffffffffe1021e0d 105: callq 0xffffffffe102bd6d ba: cmp $0x16,%eax 10a: cmp $0x16,%rax bd: jne 0x00000000000000c6 10e: jne 0x0000000000000117 bf: mov $0xffff,%eax 110: mov $0xffff,%eax c4: jmp 0x00000000000000c8 115: jmp 0x000000000000011c c6: xor %eax,%eax 117: mov $0x0,%eax c8: mov -0x8(%rbp),%rbx 11c: mov -0x228(%rbp),%rbx // epilogue cc: leaveq 123: mov -0x220(%rbp),%r13 cd: retq 12a: mov -0x218(%rbp),%r14 131: mov -0x210(%rbp),%r15 138: leaveq 139: retq On fully cached SKBs both JITed functions take 12 nsec to execute. BPF interpreter executes the program in 30 nsec. The difference in generated assembler is due to the following: Old BPF imlements LDX_MSH instruction via sk_load_byte_msh() helper function inside bpf_jit.S. New JIT removes the helper and does it explicitly, so ldx_msh cost is the same for both JITs, but generated code looks longer. New JIT has 4 registers to save, so prologue/epilogue are larger, but the cost is within noise on x64. Old JIT checks whether first insn clears A and if not emits 'xor %eax,%eax'. New JIT clears %rax unconditionally. 2. old BPF JIT doesn't support ANC_NLATTR, ANC_PAY_OFFSET, ANC_RANDOM extensions. New JIT supports all BPF extensions. Performance of such filters improves 2-4 times depending on a filter. The longer the filter the higher performance gain. Synthetic benchmarks with many ancillary loads see 20x speedup which seems to be the maximum gain from JIT Notes: . net.core.bpf_jit_enable=2 + tools/net/bpf_jit_disasm is still functional and can be used to see generated assembler . there are two jit_compile() functions and code flow for classic filters is: sk_attach_filter() - load classic BPF bpf_jit_compile() - try to JIT from classic BPF sk_convert_filter() - convert classic to internal bpf_int_jit_compile() - JIT from internal BPF seccomp and tracing filters will just call bpf_int_jit_compile() Signed-off-by: -
Alexei Starovoitov authored
Split bpf_jit_compile() into two functions to improve readability of for(pass++) loop. The change follows similar style of JIT compilers for arm, powerpc, s390 The body of new do_jit() was not reformatted to reduce noise in this patch, since the following patch replaces most of it. Tested with BPF testsuite. Signed-off-by:
-
David S. Miller authored
Phoebe Buckheister says: ==================== 802154: some cleanups and fixes This series adds some definitions for 802.15.4 header fields that were missing, changes 6lowpan fragmentation to be aware of security headers and fixes 802.15.4 datagram socket sendmsg(), which was entirely incompliant to date. Also a few minor changes to mac_cb handling, mark a single-use function static, and correctly check for EMSGSIZE conditions during wpan_header_create. Changes since v1: * rename mac_cb_alloc to mac_cb_init * catch all error cases of sendmsg() instead of only !conn && msg_name * redo 6lowpan fragmentation to not clone lower layer headers ==================== Signed-off-by: -
Phoebe Buckheister authored
This function is only used within the same translation unit, so mark it static. Signed-off-by:
Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by:
-
Phoebe Buckheister authored
802.15.4 datagram sockets do not currently have a compliant sendmsg(). The destination address supplied is always ignored, and in unconnected mode, packets are broadcast instead of dropped with -EDESTADDRREQ. This patch fixes 802.15.4 dgram sockets to be compliant, i.e. !conn && !msg_name => -EDESTADDRREQ !conn && msg_name => send to msg_name conn && !msg_name => send to connected conn && msg_name => -EISCONN Signed-off-by:
-
