- 14 Jul, 2023 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Palmer Dabbelt: - fix a formatting error in the hwprobe documentation - fix a spurious warning in the RISC-V PMU driver - fix memory detection on rv32 (problem does not manifest on any known system) - avoid parsing legacy parsing of I in ACPI ISA strings * tag 'riscv-for-linus-6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: RISC-V: Don't include Zicsr or Zifencei in I from ACPI riscv: mm: fix truncation warning on RV32 perf: RISC-V: Remove PERF_HES_STOPPED flag checking in riscv_pmu_start() Documentation: RISC-V: hwprobe: Fix a formatting error
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fixes from Rafael Wysocki: "These fix hibernation (after recent changes), frequency QoS and the sparc cpufreq driver. Specifics: - Unbreak the /sys/power/resume interface after recent changes (Azat Khuzhin). - Allow PM_QOS_DEFAULT_VALUE to be used with frequency QoS (Chungkai Yang). - Remove __init from cpufreq callbacks in the sparc driver, because they may be called after initialization too (Viresh Kumar)" * tag 'pm-6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: sparc: Don't mark cpufreq callbacks with __init PM: QoS: Restore support for default value on frequency QoS PM: hibernate: Fix writing maj:min to /sys/power/resume
-
Rafael J. Wysocki authored
Merge a PM QoS fix and a hibernation fix for 6.5-rc2. - Unbreak the /sys/power/resume interface after recent changes (Azat Khuzhin). - Allow PM_QOS_DEFAULT_VALUE to be used with frequency QoS (Chungkai Yang). * pm-sleep: PM: hibernate: Fix writing maj:min to /sys/power/resume * pm-qos: PM: QoS: Restore support for default value on frequency QoS
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "There were a bunch of fixes lined up for 2 weeks, so we have quite a few scattered fixes, mostly amdgpu and i915, but ttm has a bunch and nouveau makes an appearance. So a bit busier than usual for rc2, but nothing seems out of the ordinary. fbdev: - dma: Fix documented default preferred_bpp value ttm: - fix warning that we shouldn't mix && and || - never consider pinned BOs for eviction&swap - Don't leak a resource on eviction error - Don't leak a resource on swapout move error - fix bulk_move corruption when adding a entry client: - Send hotplug event after registering a client dma-buf: - keep the signaling time of merged fences v3 - fix an error pointer vs NULL bug sched: - wait for all deps in kill jobs - call set fence parent from scheduled i915: - Don't preserve dpll_hw_state for slave crtc in Bigjoiner - Consider OA buffer boundary when zeroing out reports - Remove dead code from gen8_pte_encode - Fix one wrong caching mode enum usage amdgpu: - SMU i2c locking fix - Fix a possible deadlock in process restoration for ROCm apps - Disable PCIe lane/speed switching on Intel platforms (the platforms don't support it) nouveau: - disp: fix HDMI on gt215+ - disp/g94: enable HDMI - acr: Abort loading ACR if no firmware was found - bring back blit subchannel for pre nv50 GPUs - Fix drm_dp_remove_payload() invocation ivpu: - Fix VPU register access in irq disable - Clear specific interrupt status bits on C0 bridge: - dw_hdmi: fix connector access for scdc - ti-sn65dsi86: Fix auxiliary bus lifetime panel: - simple: Add connector_type for innolux_at043tn24 - simple: Add Powertip PH800480T013 drm_display_mode flags" * tag 'drm-fixes-2023-07-14-1' of git://anongit.freedesktop.org/drm/drm: (32 commits) drm/nouveau: bring back blit subchannel for pre nv50 GPUs drm/nouveau/acr: Abort loading ACR if no firmware was found drm/amd: Align SMU11 SMU_MSG_OverridePcieParameters implementation with SMU13 drm/amd: Move helper for dynamic speed switch check out of smu13 drm/amd/pm: conditionally disable pcie lane/speed switching for SMU13 drm/amd/pm: share the code around SMU13 pcie parameters update drm/amdgpu: avoid restore process run into dead loop. drm/amd/pm: fix smu i2c data read risk drm/nouveau/disp/g94: enable HDMI drm/nouveau/disp: fix HDMI on gt215+ drm/client: Send hotplug event after registering a client drm/i915: Fix one wrong caching mode enum usage drm/i915: Remove dead code from gen8_pte_encode drm/i915/perf: Consider OA buffer boundary when zeroing out reports drm/i915: Don't preserve dpll_hw_state for slave crtc in Bigjoiner drm/ttm: never consider pinned BOs for eviction&swap drm/fbdev-dma: Fix documented default preferred_bpp value dma-buf: fix an error pointer vs NULL bug accel/ivpu: Clear specific interrupt status bits on C0 accel/ivpu: Fix VPU register access in irq disable ...
-
https://github.com/ceph/ceph-clientLinus Torvalds authored
Pull ceph fix from Ilya Dryomov: "A fix to prevent a potential buffer overrun in the messenger, marked for stable" * tag 'ceph-for-6.5-rc2' of https://github.com/ceph/ceph-client: libceph: harden msgr2.1 frame segment length checks
-
Dave Airlie authored
Merge tag 'amd-drm-fixes-6.5-2023-07-12' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.5-2023-07-12: amdgpu: - SMU i2c locking fix - Fix a possible deadlock in process restoration for ROCm apps - Disable PCIe lane/speed switching on Intel platforms (the platforms don't support it) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230712184009.7740-1-alexander.deucher@amd.com
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2023-07-13' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Don't preserve dpll_hw_state for slave crtc in Bigjoiner (Stanislav Lisovskiy) - Consider OA buffer boundary when zeroing out reports [perf] (Umesh Nerlige Ramappa) - Remove dead code from gen8_pte_encode (Tvrtko Ursulin) - Fix one wrong caching mode enum usage (Tvrtko Ursulin) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZK+nHLCltaxoxVw/@tursulin-desk
-
ssh://git.freedesktop.org/git/drm/drm-miscDave Airlie authored
A couple of nouveau patches addressing improving HDMI support and firmware handling, a fix for TTM to skip pinned BO when evicting, and a fix for the fbdev documentation. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <mripard@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/nq3ke75juephbex5acfyi5t6bxv22nhmfcpfhru55haj2nv3us@gehrlmjbqgjk
-
- 13 Jul, 2023 19 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofsLinus Torvalds authored
Pull erofs fixes from Gao Xiang: "Three patches address regressions related to post-EOF unexpected behaviors and fsdax unavailability of chunk-based regular files. The other two patches mainly get rid of kmap_atomic() and simplify z_erofs_transform_plain(). - Fix two unexpected loop cases when reading beyond EOF - Fix fsdax unavailability for chunk-based regular files - Get rid of the remaining kmap_atomic() - Minor cleanups" * tag 'erofs-for-6.5-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: erofs: fix fsdax unavailability for chunk-based regular files erofs: avoid infinite loop in z_erofs_do_read_page() when reading beyond EOF erofs: avoid useless loops in z_erofs_pcluster_readmore() when reading beyond EOF erofs: simplify z_erofs_transform_plain() erofs: get rid of the remaining kmap_atomic()
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Including fixes from netfilter, wireless and ebpf. Current release - regressions: - netfilter: conntrack: gre: don't set assured flag for clash entries - wifi: iwlwifi: remove 'use_tfh' config to fix crash Previous releases - regressions: - ipv6: fix a potential refcount underflow for idev - icmp6: ifix null-ptr-deref of ip6_null_entry->rt6i_idev in icmp6_dev() - bpf: fix max stack depth check for async callbacks - eth: mlx5e: - check for NOT_READY flag state after locking - fix page_pool page fragment tracking for XDP - eth: igc: - fix tx hang issue when QBV gate is closed - fix corner cases for TSN offload - eth: octeontx2-af: Move validation of ptp pointer before its usage - eth: ena: fix shift-out-of-bounds in exponential backoff Previous releases - always broken: - core: prevent skb corruption on frag list segmentation - sched: - cls_fw: fix improper refcount update leads to use-after-free - sch_qfq: account for stab overhead in qfq_enqueue - netfilter: - report use refcount overflow - prevent OOB access in nft_byteorder_eval - wifi: mt7921e: fix init command fail with enabled device - eth: ocelot: fix oversize frame dropping for preemptible TCs - eth: fec: recycle pages for transmitted XDP frames" * tag 'net-6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (79 commits) selftests: tc-testing: add test for qfq with stab overhead net/sched: sch_qfq: account for stab overhead in qfq_enqueue selftests: tc-testing: add tests for qfq mtu sanity check net/sched: sch_qfq: reintroduce lmax bound check for MTU wifi: cfg80211: fix receiving mesh packets without RFC1042 header wifi: rtw89: debug: fix error code in rtw89_debug_priv_send_h2c_set() net: txgbe: fix eeprom calculation error net/sched: make psched_mtu() RTNL-less safe net: ena: fix shift-out-of-bounds in exponential backoff netdevsim: fix uninitialized data in nsim_dev_trap_fa_cookie_write() net/sched: flower: Ensure both minimum and maximum ports are specified MAINTAINERS: Add another mailing list for QUALCOMM ETHQOS ETHERNET DRIVER docs: netdev: update the URL of the status page wifi: iwlwifi: remove 'use_tfh' config to fix crash xdp: use trusted arguments in XDP hints kfuncs bpf: cpumap: Fix memory leak in cpu_map_update_elem wifi: airo: avoid uninitialized warning in airo_get_rate() octeontx2-pf: Add additional check for MCAM rules net: dsa: Removed unneeded of_node_put in felix_parse_ports_node net: fec: use netdev_err_once() instead of netdev_err() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: - Fix some missing-prototype warnings - Fix user events struct args (did not include size of struct) When creating a user event, the "struct" keyword is to denote that the size of the field will be passed in. But the parsing failed to handle this case. - Add selftest to struct sizes for user events - Fix sample code for direct trampolines. The sample code for direct trampolines attached to handle_mm_fault(). But the prototype changed and the direct trampoline sample code was not updated. Direct trampolines needs to have the arguments correct otherwise it can fail or crash the system. - Remove unused ftrace_regs_caller_ret() prototype. - Quiet false positive of FORTIFY_SOURCE Due to backward compatibility, the structure used to save stack traces in the kernel had a fixed size of 8. This structure is exported to user space via the tracing format file. A change was made to allow more than 8 functions to be recorded, and user space now uses the size field to know how many functions are actually in the stack. But the structure still has size of 8 (even though it points into the ring buffer that has the required amount allocated to hold a full stack. This was fine until the fortifier noticed that the memcpy(&entry->caller, stack, size) was greater than the 8 functions and would complain at runtime about it. Hide this by using a pointer to the stack location on the ring buffer instead of using the address of the entry structure caller field. - Fix a deadloop in reading trace_pipe that was caused by a mismatch between ring_buffer_empty() returning false which then asked to read the data, but the read code uses rb_num_of_entries() that returned zero, and causing a infinite "retry". - Fix a warning caused by not using all pages allocated to store ftrace functions, where this can happen if the linker inserts a bunch of "NULL" entries, causing the accounting of how many pages needed to be off. - Fix histogram synthetic event crashing when the start event is removed and the end event is still using a variable from it - Fix memory leak in freeing iter->temp in tracing_release_pipe() * tag 'trace-v6.5-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing: Fix memory leak of iter->temp when reading trace_pipe tracing/histograms: Add histograms to hist_vars if they have referenced variables tracing: Stop FORTIFY_SOURCE complaining about stack trace caller ftrace: Fix possible warning on checking all pages used in ftrace_process_locs() ring-buffer: Fix deadloop issue on reading trace_pipe tracing: arm64: Avoid missing-prototype warnings selftests/user_events: Test struct size match cases tracing/user_events: Fix struct arg size match check x86/ftrace: Remove unsued extern declaration ftrace_regs_caller_ret() arm64: ftrace: Add direct call trampoline samples support samples: ftrace: Save required argument registers in sample trampolines
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen fixes from Juergen Gross: - a cleanup of the Xen related ELF-notes - a fix for virtio handling in Xen dom0 when running Xen in a VM * tag 'for-linus-6.5-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/virtio: Fix NULL deref when a bridge of PCI root bus has no parent x86/Xen: tidy xen-head.S
-
git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linuxLinus Torvalds authored
Pull sh fixes from John Paul Adrian Glaubitz: "The sh updates introduced multiple regressions. In particular, the change a8ac2961 ("sh: Avoid using IRQ0 on SH3 and SH4") causes several boards to hang during boot due to incorrect IRQ numbers. Geert Uytterhoeven has contributed patches that handle the virq offset in the IRQ code for the dreamcast, highlander and r2d boards while Artur Rojek has contributed a patch which handles the virq offset for the hd64461 companion chip" * tag 'sh-for-v6.5-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux: sh: hd64461: Handle virq offset for offchip IRQ base and HD64461 IRQ sh: mach-dreamcast: Handle virq offset in cascaded IRQ demux sh: mach-highlander: Handle virq offset in cascaded IRL demux sh: mach-r2d: Handle virq offset in cascaded IRL demux
-
Zheng Yejian authored
kmemleak reports: unreferenced object 0xffff88814d14e200 (size 256): comm "cat", pid 336, jiffies 4294871818 (age 779.490s) hex dump (first 32 bytes): 04 00 01 03 00 00 00 00 08 00 00 00 00 00 00 00 ................ 0c d8 c8 9b ff ff ff ff 04 5a ca 9b ff ff ff ff .........Z...... backtrace: [<ffffffff9bdff18f>] __kmalloc+0x4f/0x140 [<ffffffff9bc9238b>] trace_find_next_entry+0xbb/0x1d0 [<ffffffff9bc9caef>] trace_print_lat_context+0xaf/0x4e0 [<ffffffff9bc94490>] print_trace_line+0x3e0/0x950 [<ffffffff9bc95499>] tracing_read_pipe+0x2d9/0x5a0 [<ffffffff9bf03a43>] vfs_read+0x143/0x520 [<ffffffff9bf04c2d>] ksys_read+0xbd/0x160 [<ffffffff9d0f0edf>] do_syscall_64+0x3f/0x90 [<ffffffff9d2000aa>] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 when reading file 'trace_pipe', 'iter->temp' is allocated or relocated in trace_find_next_entry() but not freed before 'trace_pipe' is closed. To fix it, free 'iter->temp' in tracing_release_pipe(). Link: https://lore.kernel.org/linux-trace-kernel/20230713141435.1133021-1-zhengyejian1@huawei.com Cc: stable@vger.kernel.org Fixes: ff895103 ("tracing: Save off entry when peeking at next entry") Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
-
Ilya Dryomov authored
ceph_frame_desc::fd_lens is an int array. decode_preamble() thus effectively casts u32 -> int but the checks for segment lengths are written as if on unsigned values. While reading in HELLO or one of the AUTH frames (before authentication is completed), arithmetic in head_onwire_len() can get duped by negative ctrl_len and produce head_len which is less than CEPH_PREAMBLE_LEN but still positive. This would lead to a buffer overrun in prepare_read_control() as the preamble gets copied to the newly allocated buffer of size head_len. Cc: stable@vger.kernel.org Fixes: cd1a677c ("libceph, ceph: implement msgr2.1 protocol (crc and secure modes)") Reported-by: Thelford Williams <thelford@google.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Xiubo Li <xiubli@redhat.com>
-
Paolo Abeni authored
Pedro Tammela says: ==================== net/sched: fixes for sch_qfq Patch 1 fixes a regression introduced in 6.4 where the MTU size could be bigger than 'lmax'. Patch 3 fixes an issue where the code doesn't account for qdisc_pkt_len() returning a size bigger then 'lmax'. Patches 2 and 4 are selftests for the issues above. ==================== Link: https://lore.kernel.org/r/20230711210103.597831-1-pctammela@mojatatu.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
Pedro Tammela authored
A packet with stab overhead greater than QFQ_MAX_LMAX should be dropped by the QFQ qdisc as it can't handle such lengths. Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Tested-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-
Pedro Tammela authored
Lion says: ------- In the QFQ scheduler a similar issue to CVE-2023-31436 persists. Consider the following code in net/sched/sch_qfq.c: static int qfq_enqueue(struct sk_buff *skb, struct Qdisc *sch, struct sk_buff **to_free) { unsigned int len = qdisc_pkt_len(skb), gso_segs; // ... if (unlikely(cl->agg->lmax < len)) { pr_debug("qfq: increasing maxpkt from %u to %u for class %u", cl->agg->lmax, len, cl->common.classid); err = qfq_change_agg(sch, cl, cl->agg->class_weight, len); if (err) { cl->qstats.drops++; return qdisc_drop(skb, sch, to_free); } // ... } Similarly to CVE-2023-31436, "lmax" is increased without any bounds checks according to the packet length "len". Usually this would not impose a problem because packet sizes are naturally limited. This is however not the actual packet length, rather the "qdisc_pkt_len(skb)" which might apply size transformations according to "struct qdisc_size_table" as created by "qdisc_get_stab()" in net/sched/sch_api.c if the TCA_STAB option was set when modifying the qdisc. A user may choose virtually any size using such a table. As a result the same issue as in CVE-2023-31436 can occur, allowing heap out-of-bounds read / writes in the kmalloc-8192 cache. ------- We can create the issue with the following commands: tc qdisc add dev $DEV root handle 1: stab mtu 2048 tsize 512 mpu 0 \ overhead 999999999 linklayer ethernet qfq tc class add dev $DEV parent 1: classid 1:1 htb rate 6mbit burst 15k tc filter add dev $DEV parent 1: matchall classid 1:1 ping -I $DEV 1.1.1.2 This is caused by incorrectly assuming that qdisc_pkt_len() returns a length within the QFQ_MIN_LMAX < len < QFQ_MAX_LMAX. Fixes: 462dbc91 ("pkt_sched: QFQ Plus: fair-queueing service at DRR cost") Reported-by: Lion <nnamrec@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-
Pedro Tammela authored
QFQ only supports a certain bound of MTU size so make sure we check for this requirement in the tests. Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Tested-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-
Pedro Tammela authored
25369891 deletes a check for the case where no 'lmax' is specified which 30379334 previously fixed as 'lmax' could be set to the device's MTU without any bound checking for QFQ_LMAX_MIN and QFQ_LMAX_MAX. Therefore, reintroduce the check. Fixes: 25369891 ("net/sched: sch_qfq: refactor parsing of netlink parameters") Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-
Artur Rojek authored
A recent change to start counting SuperH IRQ #s from 16 breaks support for the Hitachi HD64461 companion chip. Move the offchip IRQ base and HD64461 IRQ # by 16 in order to accommodate for the new virq numbering rules. Fixes: a8ac2961 ("sh: Avoid using IRQ0 on SH3 and SH4") Signed-off-by: Artur Rojek <contact@artur-rojek.eu> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Link: https://lore.kernel.org/r/20230710233132.69734-1-contact@artur-rojek.euSigned-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
-
Geert Uytterhoeven authored
Take into account the virq offset when translating cascaded interrupts. Fixes: a8ac2961 ("sh: Avoid using IRQ0 on SH3 and SH4") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Link: https://lore.kernel.org/r/7d0cb246c9f1cd24bb1f637ec5cb67e799a4c3b8.1688908227.git.geert+renesas@glider.beSigned-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
-
Geert Uytterhoeven authored
Take into account the virq offset when translating cascaded IRL interrupts. Fixes: a8ac2961 ("sh: Avoid using IRQ0 on SH3 and SH4") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Link: https://lore.kernel.org/r/4fcb0d08a2b372431c41e04312742dc9e41e1be4.1688908186.git.geert+renesas@glider.beSigned-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
-
Geert Uytterhoeven authored
When booting rts7751r2dplus_defconfig on QEMU, the system hangs due to an interrupt storm on IRQ 20. IRQ 20 aka event 0x280 is a cascaded IRL interrupt, which maps to IRQ_VOYAGER, the interrupt used by the Silicon Motion SM501 multimedia companion chip. As rts7751r2d_irq_demux() does not take into account the new virq offset, the interrupt is no longer translated, leading to an unhandled interrupt. Fix this by taking into account the virq offset when translating cascaded IRL interrupts. Fixes: a8ac2961 ("sh: Avoid using IRQ0 on SH3 and SH4") Reported-by: Guenter Roeck <linux@roeck-us.net> Closes: https://lore.kernel.org/r/fbfea3ad-d327-4ad5-ac9c-648c7ca3fe1f@roeck-us.netSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Tested-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/2c99d5df41c40691f6c407b7b6a040d406bc81ac.1688901306.git.geert+renesas@glider.beSigned-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski authored
Alexei Starovoitov says: ==================== pull-request: bpf 2023-07-12 We've added 5 non-merge commits during the last 7 day(s) which contain a total of 7 files changed, 93 insertions(+), 28 deletions(-). The main changes are: 1) Fix max stack depth check for async callbacks, from Kumar. 2) Fix inconsistent JIT image generation, from Björn. 3) Use trusted arguments in XDP hints kfuncs, from Larysa. 4) Fix memory leak in cpu_map_update_elem, from Pu. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: xdp: use trusted arguments in XDP hints kfuncs bpf: cpumap: Fix memory leak in cpu_map_update_elem riscv, bpf: Fix inconsistent JIT image generation selftests/bpf: Add selftest for check_stack_max_depth bug bpf: Fix max stack depth check for async callbacks ==================== Link: https://lore.kernel.org/r/20230712223045.40182-1-alexei.starovoitov@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Felix Fietkau authored
Fix ethernet header length field after stripping the mesh header Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/CT5GNZSK28AI.2K6M69OXM9RW5@syracuse/ Fixes: 986e43b1 ("wifi: mac80211: fix receiving A-MSDU frames on mesh interfaces") Reported-and-tested-by: Nicolas Escande <nico.escande@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20230711115052.68430-1-nbd@nbd.nameSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Zhang Shurong authored
If there is a failure during rtw89_fw_h2c_raw() rtw89_debug_priv_send_h2c should return negative error code instead of a positive value count. Fix this bug by returning correct error code. Fixes: e3ec7017 ("rtw89: add Realtek 802.11ax driver") Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://lore.kernel.org/r/tencent_AD09A61BC4DA92AD1EB0790F5C850E544D07@qq.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 12 Jul, 2023 13 commits
-
-
Jiawen Wu authored
For some device types like TXGBE_ID_XAUI, *checksum computed in txgbe_calc_eeprom_checksum() is larger than TXGBE_EEPROM_SUM. Remove the limit on the size of *checksum. Fixes: 049fe536 ("net: txgbe: Add operations to interact with firmware") Fixes: 5e2ea780 ("net: txgbe: Fix unsigned comparison to zero in txgbe_calc_eeprom_checksum()") Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Link: https://lore.kernel.org/r/20230711063414.3311-1-jiawenwu@trustnetic.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
https://github.com/openrisc/linuxLinus Torvalds authored
Pull OpenRISC fix from Stafford Horne: - During the 6.4 cycle my fpu support work broke ABI compatibility in the sigcontext struct. This was noticed by musl libc developers after the release. This fix restores the ABI. * tag 'for-linus' of https://github.com/openrisc/linux: openrisc: Union fpcsr and oldmask in sigcontext to unbreak userspace ABI
-
Mohamed Khalfella authored
Hist triggers can have referenced variables without having direct variables fields. This can be the case if referenced variables are added for trigger actions. In this case the newly added references will not have field variables. Not taking such referenced variables into consideration can result in a bug where it would be possible to remove hist trigger with variables being refenced. This will result in a bug that is easily reproducable like so $ cd /sys/kernel/tracing $ echo 'synthetic_sys_enter char[] comm; long id' >> synthetic_events $ echo 'hist:keys=common_pid.execname,id.syscall:vals=hitcount:comm=common_pid.execname' >> events/raw_syscalls/sys_enter/trigger $ echo 'hist:keys=common_pid.execname,id.syscall:onmatch(raw_syscalls.sys_enter).synthetic_sys_enter($comm, id)' >> events/raw_syscalls/sys_enter/trigger $ echo '!hist:keys=common_pid.execname,id.syscall:vals=hitcount:comm=common_pid.execname' >> events/raw_syscalls/sys_enter/trigger [ 100.263533] ================================================================== [ 100.264634] BUG: KASAN: slab-use-after-free in resolve_var_refs+0xc7/0x180 [ 100.265520] Read of size 8 at addr ffff88810375d0f0 by task bash/439 [ 100.266320] [ 100.266533] CPU: 2 PID: 439 Comm: bash Not tainted 6.5.0-rc1 #4 [ 100.267277] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-20220807_005459-localhost 04/01/2014 [ 100.268561] Call Trace: [ 100.268902] <TASK> [ 100.269189] dump_stack_lvl+0x4c/0x70 [ 100.269680] print_report+0xc5/0x600 [ 100.270165] ? resolve_var_refs+0xc7/0x180 [ 100.270697] ? kasan_complete_mode_report_info+0x80/0x1f0 [ 100.271389] ? resolve_var_refs+0xc7/0x180 [ 100.271913] kasan_report+0xbd/0x100 [ 100.272380] ? resolve_var_refs+0xc7/0x180 [ 100.272920] __asan_load8+0x71/0xa0 [ 100.273377] resolve_var_refs+0xc7/0x180 [ 100.273888] event_hist_trigger+0x749/0x860 [ 100.274505] ? kasan_save_stack+0x2a/0x50 [ 100.275024] ? kasan_set_track+0x29/0x40 [ 100.275536] ? __pfx_event_hist_trigger+0x10/0x10 [ 100.276138] ? ksys_write+0xd1/0x170 [ 100.276607] ? do_syscall_64+0x3c/0x90 [ 100.277099] ? entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 100.277771] ? destroy_hist_data+0x446/0x470 [ 100.278324] ? event_hist_trigger_parse+0xa6c/0x3860 [ 100.278962] ? __pfx_event_hist_trigger_parse+0x10/0x10 [ 100.279627] ? __kasan_check_write+0x18/0x20 [ 100.280177] ? mutex_unlock+0x85/0xd0 [ 100.280660] ? __pfx_mutex_unlock+0x10/0x10 [ 100.281200] ? kfree+0x7b/0x120 [ 100.281619] ? ____kasan_slab_free+0x15d/0x1d0 [ 100.282197] ? event_trigger_write+0xac/0x100 [ 100.282764] ? __kasan_slab_free+0x16/0x20 [ 100.283293] ? __kmem_cache_free+0x153/0x2f0 [ 100.283844] ? sched_mm_cid_remote_clear+0xb1/0x250 [ 100.284550] ? __pfx_sched_mm_cid_remote_clear+0x10/0x10 [ 100.285221] ? event_trigger_write+0xbc/0x100 [ 100.285781] ? __kasan_check_read+0x15/0x20 [ 100.286321] ? __bitmap_weight+0x66/0xa0 [ 100.286833] ? _find_next_bit+0x46/0xe0 [ 100.287334] ? task_mm_cid_work+0x37f/0x450 [ 100.287872] event_triggers_call+0x84/0x150 [ 100.288408] trace_event_buffer_commit+0x339/0x430 [ 100.289073] ? ring_buffer_event_data+0x3f/0x60 [ 100.292189] trace_event_raw_event_sys_enter+0x8b/0xe0 [ 100.295434] syscall_trace_enter.constprop.0+0x18f/0x1b0 [ 100.298653] syscall_enter_from_user_mode+0x32/0x40 [ 100.301808] do_syscall_64+0x1a/0x90 [ 100.304748] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 100.307775] RIP: 0033:0x7f686c75c1cb [ 100.310617] Code: 73 01 c3 48 8b 0d 65 3c 10 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 21 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 35 3c 10 00 f7 d8 64 89 01 48 [ 100.317847] RSP: 002b:00007ffc60137a38 EFLAGS: 00000246 ORIG_RAX: 0000000000000021 [ 100.321200] RAX: ffffffffffffffda RBX: 000055f566469ea0 RCX: 00007f686c75c1cb [ 100.324631] RDX: 0000000000000001 RSI: 0000000000000001 RDI: 000000000000000a [ 100.328104] RBP: 00007ffc60137ac0 R08: 00007f686c818460 R09: 000000000000000a [ 100.331509] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000009 [ 100.334992] R13: 0000000000000007 R14: 000000000000000a R15: 0000000000000007 [ 100.338381] </TASK> We hit the bug because when second hist trigger has was created has_hist_vars() returned false because hist trigger did not have variables. As a result of that save_hist_vars() was not called to add the trigger to trace_array->hist_vars. Later on when we attempted to remove the first histogram find_any_var_ref() failed to detect it is being used because it did not find the second trigger in hist_vars list. With this change we wait until trigger actions are created so we can take into consideration if hist trigger has variable references. Also, now we check the return value of save_hist_vars() and fail trigger creation if save_hist_vars() fails. Link: https://lore.kernel.org/linux-trace-kernel/20230712223021.636335-1-mkhalfella@purestorage.com Cc: stable@vger.kernel.org Fixes: 067fe038 ("tracing: Add variable reference handling to hist triggers") Signed-off-by: Mohamed Khalfella <mkhalfella@purestorage.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
-
Pedro Tammela authored
Eric Dumazet says[1]: ------- Speaking of psched_mtu(), I see that net/sched/sch_pie.c is using it without holding RTNL, so dev->mtu can be changed underneath. KCSAN could issue a warning. ------- Annotate dev->mtu with READ_ONCE() so KCSAN don't issue a warning. [1] https://lore.kernel.org/all/CANn89iJoJO5VtaJ-2=_d2aOQhb0Xw8iBT_Cxqp2HyuS-zj6azw@mail.gmail.com/ v1 -> v2: Fix commit message Fixes: d4b36210 ("net: pkt_sched: PIE AQM scheme") Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230711021634.561598-1-pctammela@mojatatu.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Krister Johansen authored
The ENA adapters on our instances occasionally reset. Once recently logged a UBSAN failure to console in the process: UBSAN: shift-out-of-bounds in build/linux/drivers/net/ethernet/amazon/ena/ena_com.c:540:13 shift exponent 32 is too large for 32-bit type 'unsigned int' CPU: 28 PID: 70012 Comm: kworker/u72:2 Kdump: loaded not tainted 5.15.117 Hardware name: Amazon EC2 c5d.9xlarge/, BIOS 1.0 10/16/2017 Workqueue: ena ena_fw_reset_device [ena] Call Trace: <TASK> dump_stack_lvl+0x4a/0x63 dump_stack+0x10/0x16 ubsan_epilogue+0x9/0x36 __ubsan_handle_shift_out_of_bounds.cold+0x61/0x10e ? __const_udelay+0x43/0x50 ena_delay_exponential_backoff_us.cold+0x16/0x1e [ena] wait_for_reset_state+0x54/0xa0 [ena] ena_com_dev_reset+0xc8/0x110 [ena] ena_down+0x3fe/0x480 [ena] ena_destroy_device+0xeb/0xf0 [ena] ena_fw_reset_device+0x30/0x50 [ena] process_one_work+0x22b/0x3d0 worker_thread+0x4d/0x3f0 ? process_one_work+0x3d0/0x3d0 kthread+0x12a/0x150 ? set_kthread_struct+0x50/0x50 ret_from_fork+0x22/0x30 </TASK> Apparently, the reset delays are getting so large they can trigger a UBSAN panic. Looking at the code, the current timeout is capped at 5000us. Using a base value of 100us, the current code will overflow after (1<<29). Even at values before 32, this function wraps around, perhaps unintentionally. Cap the value of the exponent used for this backoff at (1<<16) which is larger than currently necessary, but large enough to support bigger values in the future. Cc: stable@vger.kernel.org Fixes: 4bb7f4cf ("net: ena: reduce driver load time") Signed-off-by: Krister Johansen <kjlx@templeofstupid.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Shay Agroskin <shayagr@amazon.com> Link: https://lore.kernel.org/r/20230711013621.GE1926@templeofstupid.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Steven Rostedt (Google) authored
The stack_trace event is an event created by the tracing subsystem to store stack traces. It originally just contained a hard coded array of 8 words to hold the stack, and a "size" to know how many entries are there. This is exported to user space as: name: kernel_stack ID: 4 format: field:unsigned short common_type; offset:0; size:2; signed:0; field:unsigned char common_flags; offset:2; size:1; signed:0; field:unsigned char common_preempt_count; offset:3; size:1; signed:0; field:int common_pid; offset:4; size:4; signed:1; field:int size; offset:8; size:4; signed:1; field:unsigned long caller[8]; offset:16; size:64; signed:0; print fmt: "\t=> %ps\n\t=> %ps\n\t=> %ps\n" "\t=> %ps\n\t=> %ps\n\t=> %ps\n" "\t=> %ps\n\t=> %ps\n",i (void *)REC->caller[0], (void *)REC->caller[1], (void *)REC->caller[2], (void *)REC->caller[3], (void *)REC->caller[4], (void *)REC->caller[5], (void *)REC->caller[6], (void *)REC->caller[7] Where the user space tracers could parse the stack. The library was updated for this specific event to only look at the size, and not the array. But some older users still look at the array (note, the older code still checks to make sure the array fits inside the event that it read. That is, if only 4 words were saved, the parser would not read the fifth word because it will see that it was outside of the event size). This event was changed a while ago to be more dynamic, and would save a full stack even if it was greater than 8 words. It does this by simply allocating more ring buffer to hold the extra words. Then it copies in the stack via: memcpy(&entry->caller, fstack->calls, size); As the entry is struct stack_entry, that is created by a macro to both create the structure and export this to user space, it still had the caller field of entry defined as: unsigned long caller[8]. When the stack is greater than 8, the FORTIFY_SOURCE code notices that the amount being copied is greater than the source array and complains about it. It has no idea that the source is pointing to the ring buffer with the required allocation. To hide this from the FORTIFY_SOURCE logic, pointer arithmetic is used: ptr = ring_buffer_event_data(event); entry = ptr; ptr += offsetof(typeof(*entry), caller); memcpy(ptr, fstack->calls, size); Link: https://lore.kernel.org/all/20230612160748.4082850-1-svens@linux.ibm.com/ Link: https://lore.kernel.org/linux-trace-kernel/20230712105235.5fc441aa@gandalf.local.home Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Reported-by: Sven Schnelle <svens@linux.ibm.com> Tested-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
-
Zheng Yejian authored
As comments in ftrace_process_locs(), there may be NULL pointers in mcount_loc section: > Some architecture linkers will pad between > the different mcount_loc sections of different > object files to satisfy alignments. > Skip any NULL pointers. After commit 20e5227e ("ftrace: allow NULL pointers in mcount_loc"), NULL pointers will be accounted when allocating ftrace pages but skipped before adding into ftrace pages, this may result in some pages not being used. Then after commit 706c81f8 ("ftrace: Remove extra helper functions"), warning may occur at: WARN_ON(pg->next); To fix it, only warn for case that no pointers skipped but pages not used up, then free those unused pages after releasing ftrace_lock. Link: https://lore.kernel.org/linux-trace-kernel/20230712060452.3175675-1-zhengyejian1@huawei.com Cc: stable@vger.kernel.org Fixes: 706c81f8 ("ftrace: Remove extra helper functions") Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
-
Karol Herbst authored
1ba6113a90a0 removed a lot of the kernel GPU channel, but method 0x128 was important as otherwise the GPU spams us with `CACHE_ERROR` messages. We use the blit subchannel inside our vblank handling, so we should keep at least this part. v2: Only do it for NV11+ GPUs Closes: https://gitlab.freedesktop.org/drm/nouveau/-/issues/201 Fixes: 4a16dd9d ("drm/nouveau/kms: switch to drm fbdev helpers") Signed-off-by: Karol Herbst <kherbst@redhat.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230526091052.2169044-1-kherbst@redhat.com
-
Karol Herbst authored
This fixes a NULL pointer access inside nvkm_acr_oneinit in case necessary firmware files couldn't be loaded. Closes: https://gitlab.freedesktop.org/drm/nouveau/-/issues/212 Fixes: 4b569ded ("drm/nouveau/acr/ga102: initial support") Signed-off-by: Karol Herbst <kherbst@redhat.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230522201838.1496622-1-kherbst@redhat.com
-
Dan Carpenter authored
The simple_write_to_buffer() function is designed to handle partial writes. It returns negatives on error, otherwise it returns the number of bytes that were able to be copied. This code doesn't check the return properly. We only know that the first byte is written, the rest of the buffer might be uninitialized. There is no need to use the simple_write_to_buffer() function. Partial writes are prohibited by the "if (*ppos != 0)" check at the start of the function. Just use memdup_user() and copy the whole buffer. Fixes: d3cbb907 ("netdevsim: add ACL trap reporting cookie as a metadata") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/7c1f950b-3a7d-4252-82a6-876e53078ef7@moroto.mountainSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Linus Torvalds authored
Merge tag 'platform-drivers-x86-v6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: "Misc small fixes and hw-id additions" * tag 'platform-drivers-x86-v6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: touchscreen_dmi: Add info for the Archos 101 Cesium Educ tablet platform/x86: dell-ddv: Fix mangled list in documentation platform/x86: dell-ddv: Improve error handling platform/x86/amd: pmf: Add new ACPI ID AMDI0103 platform/x86/amd: pmc: Add new ACPI ID AMDI000A platform/x86/amd: pmc: Apply nvme quirk to HP 15s-eq2xxx platform/x86: Move s2idle quirk from thinkpad-acpi to amd-pmc platform/x86: int3472/discrete: set variable skl_int3472_regulator_second_sensor storage-class-specifier to static platform/x86/intel/tpmi: Prevent overflow for cap_offset platform/x86: wmi: Replace open coded guid_parse_and_compare() platform/x86: wmi: Break possible infinite loop when parsing GUID
-
Linus Torvalds authored
Merge tag 'probes-fixes-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull probes fixes from Masami Hiramatsu: - Fix fprobe's rethook release issues: - Release rethook after ftrace_ops is unregistered so that the rethook is not accessed after free. - Stop rethook before ftrace_ops is unregistered so that the rethook is NOT used after exiting unregister_fprobe() - Fix eprobe cleanup logic. If it attaches to multiple events and failes to enable one of them, rollback all enabled events correctly. - Fix fprobe to unlock ftrace recursion lock correctly when it missed by another running kprobe. - Cleanup kprobe to remove unnecessary NULL. - Cleanup kprobe to remove unnecessary 0 initializations. * tag 'probes-fixes-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: fprobe: Ensure running fprobe_exit_handler() finished before calling rethook_free() kernel: kprobes: Remove unnecessary ‘0’ values kprobes: Remove unnecessary ‘NULL’ values from correct_ret_addr fprobe: add unlock to match a succeeded ftrace_test_recursion_trylock kernel/trace: Fix cleanup logic of enable_trace_eprobe fprobe: Release rethook after the ftrace_ops is unregistered
-
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hidLinus Torvalds authored
Pull HID fixes from Benjamin Tissoires: - AMD SFH shift-out-of-bounds fix (Basavaraj Natikar) - avoid struct memcpy overrun warning in the hid-hyperv module (Arnd Bergmann) - a quick HID kselftests script fix for our CI to be happy (Benjamin Tissoires) - various fixes and additions of device IDs * tag 'for-linus-2023071101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: amd_sfh: Fix for shift-out-of-bounds HID: amd_sfh: Rename the float32 variable HID: input: fix mapping for camera access keys HID: logitech-hidpp: Add wired USB id for Logitech G502 Lightspeed HID: nvidia-shield: Pack inner/related declarations in HOSTCMD reports HID: hyperv: avoid struct memcpy overrun warning selftests: hid: fix vmtests.sh not running make headers
-