Due to hardware limitations, only DCQCN is supported for UD. Therefore, the
default algorithm for UD is set to DCQCN.

Fixes: f91696f2 ("RDMA/hns: Support congestion control type selection according to the FW")
Signed-off-by: Luoyouming <luoyouming@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20231017125239.164455-6-huangjunxian6@hisilicon.comSigned-off-by: Leon Romanovsky <leon@kernel.org>

SL set by users may exceed the capability of devices. So add check
for this situation.

Fixes: fba429fc ("RDMA/hns: Fix missing fields in address vector")
Fixes: 70f92521 ("RDMA/hns: Use the reserved loopback QPs to free MR before destroying MPT")
Fixes: f0cb411a ("RDMA/hns: Use new interface to modify QP context")
Signed-off-by: Luoyouming <luoyouming@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20231017125239.164455-5-huangjunxian6@hisilicon.comSigned-off-by: Leon Romanovsky <leon@kernel.org>

The ib_mtu_enum_to_int() and uverbs_attr_get_len() may returns a negative
value. In this case, mixed comparisons of signed and unsigned types will
throw wrong results.

This patch adds judgement for this situation.

Fixes: 30b70788 ("RDMA/hns: Support inline data in extented sge space for RC")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20231017125239.164455-4-huangjunxian6@hisilicon.comSigned-off-by: Leon Romanovsky <leon@kernel.org>

ucmd in hns_roce_create_qp_common() are not initialized. But it works fine
until new member sdb_addr is added to struct hns_roce_ib_create_qp.

If the user-mode driver uses an old version ABI, then the value of the new
member will be undefined after ib_copy_from_udata().

This patch fixes it by initialize this variable to 0. And the default value
of the new member sdb_addr will be 0 which is invalid.

Fixes: 0425e3e6 ("RDMA/hns: Support flush cqe for hip08 in kernel space")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20231017125239.164455-3-huangjunxian6@hisilicon.comSigned-off-by: Leon Romanovsky <leon@kernel.org>

The current driver will print all asynchronous events. Some of the
print levels are set improperly, e.g. SRQ limit reach and SRQ last
wqe reach, which may also occur during normal operation of the software.
Currently, the information of these event is printed as a warning,
which causes a large amount of printing even during normal use of the
application. As a result, the service performance deteriorates.

This patch fixes the printing storms by modifying the print level.

Fixes: b00a92c8 ("RDMA/hns: Move all prints out of irq handle")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20231017125239.164455-2-huangjunxian6@hisilicon.comSigned-off-by: Leon Romanovsky <leon@kernel.org>

Add netlink command that enables/disables privileged QKEY by default.

It is disabled by default, since according to IB spec only privileged
users are allowed to use privileged QKEY.
According to the IB specification rel-1.6, section 3.5.3:
"QKEYs with the most significant bit set are considered controlled
QKEYs, and a HCA does not allow a consumer to arbitrarily specify a
controlled QKEY."

Using rdma tool,
$rdma system set privileged-qkey on

When enabled non-privileged users would be able to use
controlled QKEYs which are considered privileged.

Using rdma tool,
$rdma system set privileged-qkey off

When disabled only privileged users would be able to use
controlled QKEYs.

You can also use the command below to check the parameter state:
$rdma system show
netns shared privileged-qkey off copy-on-fork on
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Link: https://lore.kernel.org/r/90398be70a9d23d2aa9d0f9fd11d2c264c1be534.1696848201.git.leon@kernel.orgSigned-off-by: Leon Romanovsky <leon@kernel.org>

In the SRQ notification handler, do not report the SRQ_ERROR
in the default event case, as there was no error.
Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1697049097-31992-4-git-send-email-selvin.xavier@broadcom.comSigned-off-by: Leon Romanovsky <leon@kernel.org>

Report QP, SRQ and CQ async events and errors.
Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1697049097-31992-3-git-send-email-selvin.xavier@broadcom.comSigned-off-by: Leon Romanovsky <leon@kernel.org>

Updating the HW structures for the affiliated event and error
reporting. Newly added interface structures will be used in the
followup patch.
Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1697049097-31992-2-git-send-email-selvin.xavier@broadcom.comSigned-off-by: Leon Romanovsky <leon@kernel.org>

Previously when we had a RAW QP, we bound a counter to it when it moved
to INIT state, using the counter context inside RQC.

But when we try to modify that counter later in RTS state we used
modify QP which tries to change the counter inside QPC instead of RQC.

Now we correctly modify the counter set_id inside of RQC instead of QPC
for the RAW QP.

Fixes: d14133dd ("IB/mlx5: Support set qp counter")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/2e5ab6713784a8fe997d19c508187a0dfecf2dfc.1696847964.git.leon@kernel.orgSigned-off-by: Leon Romanovsky <leon@kernel.org>

Add support for reregister MR verb API by doing a de-register
followed by a register MR with the new attributes. Reuse resources
like iwmr handle and HW stag where possible.
Signed-off-by: Sindhu Devale <sindhu.devale@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20231004151306.228-1-shiraz.saleem@intel.comSigned-off-by: Leon Romanovsky <leon@kernel.org>

Fix typos.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/169643338101.8035.6826446669479247727.stgit@manet.1015granger.netSigned-off-by: Leon Romanovsky <leon@kernel.org>

This series from Patrisious extends mlx5 to support IPsec packet offload
in multiport devices (MPV, see [1] for more details).

These devices have single flow steering logic and two netdev interfaces,
which require extra logic to manage IPsec configurations as they performed
on netdevs.

Thanks

[1] https://lore.kernel.org/linux-rdma/20180104152544.28919-1-leon@kernel.org/

Link: https://lore.kernel.org/all/20231002083832.19746-1-leon@kernel.orgSigned-of-by: Leon Romanovsky <leon@kernel.org>

* mlx5-next: (576 commits)
  net/mlx5: Handle IPsec steering upon master unbind/bind
  net/mlx5: Configure IPsec steering for ingress RoCEv2 MPV traffic
  net/mlx5: Configure IPsec steering for egress RoCEv2 MPV traffic
  net/mlx5: Add create alias flow table function to ipsec roce
  net/mlx5: Implement alias object allow and create functions
  net/mlx5: Add alias flow table bits
  net/mlx5: Store devcom pointer inside IPsec RoCE
  net/mlx5: Register mlx5e priv to devcom in MPV mode
  RDMA/mlx5: Send events from IB driver about device affiliation state
  net/mlx5: Introduce ifc bits for migration in a chunk mode
  Linux 6.6-rc3
  ...

Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).

As found with Coccinelle[1], add __counted_by for struct tid_rb_node.

[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci

Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230929180431.3005464-7-keescook@chromium.orgSigned-off-by: Leon Romanovsky <leon@kernel.org>

Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).

As found with Coccinelle[1], add __counted_by for struct mthca_icm_table.

[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci

Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230929180431.3005464-6-keescook@chromium.orgSigned-off-by: Leon Romanovsky <leon@kernel.org>

Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).

As found with Coccinelle[1], add __counted_by for struct srp_fr_pool.

[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci

Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230929180431.3005464-5-keescook@chromium.orgSigned-off-by: Leon Romanovsky <leon@kernel.org>

Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).

As found with Coccinelle[1], add __counted_by for struct siw_pbl.

[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci

Cc: Bernard Metzler <bmt@zurich.ibm.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230929180431.3005464-4-keescook@chromium.orgSigned-off-by: Leon Romanovsky <leon@kernel.org>

Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).

As found with Coccinelle[1], add __counted_by for struct usnic_uiom_chunk.

[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci

Cc: Christian Benvenuti <benve@cisco.com>
Cc: Nelson Escobar <neescoba@cisco.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230929180431.3005464-3-keescook@chromium.orgSigned-off-by: Leon Romanovsky <leon@kernel.org>

Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).

As found with Coccinelle[1], add __counted_by for struct ib_pkey_cache.

[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci

Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: "Håkon Bugge" <haakon.bugge@oracle.com>
Cc: Avihai Horon <avihaih@nvidia.com>
Cc: Anand Khoje <anand.a.khoje@oracle.com>
Cc: Mark Bloch <mbloch@nvidia.com>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230929180431.3005464-2-keescook@chromium.orgSigned-off-by: Leon Romanovsky <leon@kernel.org>

Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).

As found with Coccinelle[1], add __counted_by for struct rdma_hw_stats.

[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci

Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230929180431.3005464-1-keescook@chromium.orgSigned-off-by: Leon Romanovsky <leon@kernel.org>

Compared with normal doorbell, using record doorbell can shorten the
process of ringing the doorbell and reduce the latency.

Add a flag HNS_ROCE_CAP_FLAG_SRQ_RECORD_DB to allow FW to
enable/disable SRQ record doorbell.

If the flag above is set, allocate the dma buffer for SRQ record
doorbell and write the buffer address into SRQC during SRQ creation.

For userspace SRQ, add a flag HNS_ROCE_RSP_SRQ_CAP_RECORD_DB to notify
userspace whether the SRQ record doorbell is enabled.
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20230926130026.583088-1-huangjunxian6@hisilicon.comSigned-off-by: Leon Romanovsky <leon@kernel.org>

When the master device is unbinded, make sure to clean up all of the
steering rules or flow tables that were created over the master, in
order to allow proper unbinding of master, and for ethernet traffic
to continue to work independently.

Upon bringing master device back up and attaching the slave to it,
checks if the slave already has IPsec configured and if so reconfigure
the rules needed to support RoCE traffic.

Note that while master device is unbound, the user is unable to
configure IPsec again, since they are in a kind of illegal state in
which they are in MPV mode but the slave has no master.

However if IPsec was configured before hand, it will continue to work
for ethernet traffic while master is unbound, and would continue to
work for all traffic when the master is bound back again.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Link: https://lore.kernel.org/r/8434e88912c588affe51b34669900382a132e873.1695296682.git.leon@kernel.orgSigned-off-by: Leon Romanovsky <leon@kernel.org>

Add empty flow table in RDMA_RX master domain, to forward all received
traffic to it, in order to continue through the FW RoCE steering.

In order to achieve that however, first we check if the decrypted
traffic is RoCEv2, if so then forward it to RDMA_RX domain.

But in case the traffic is coming from the slave, have to first send the
traffic to an alias table in order to switch gvmi and from there we can
go to the appropriate gvmi flow table in RDMA_RX master domain.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Link: https://lore.kernel.org/r/d2200b53158b1e7ef30996812107dd7207485c28.1695296682.git.leon@kernel.orgSigned-off-by: Leon Romanovsky <leon@kernel.org>

Add steering tables/rules in RDMA_TX master domain, to forward all traffic
to IPsec crypto table in NIC domain.
But in case the traffic is coming from the slave, have to first send the
traffic to an alias table in order to switch gvmi and from there we can
go to the appropriate gvmi crypto table in NIC domain.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Link: https://lore.kernel.org/r/7ca5cf1ac5c6979359b8726e97510574e2b3d44d.1695296682.git.leon@kernel.orgSigned-off-by: Leon Romanovsky <leon@kernel.org>

Implements functions which creates an alias flow table, and check
if alias flow table creation is even supported, and if successful
returns the created alias flow table object id.

This function would be used in later patches to allow jumping from
one vhca to another, in order to add support for MPV mode.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Link: https://lore.kernel.org/r/36e15ef41586f2a9aacc65b935de18391eef5607.1695296682.git.leon@kernel.orgSigned-off-by: Leon Romanovsky <leon@kernel.org>

Add functions which allow one vhca to access another vhca object,
and functions that creates an alias object or destroys it.

Together they can be used to create cross vhca flow table that is able
jump from the steering domain that is managed by one vport,
to the steering domain on a different vport.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Link: https://lore.kernel.org/r/f45a9c85319fa783186b8988abcd64955b5f2a0c.1695296682.git.leon@kernel.orgSigned-off-by: Leon Romanovsky <leon@kernel.org>

Add all the capabilities needed to check for alias object support.
As well as all the fields or commands needed for its creation and
the creation of flow table that is able to jump to an alias object.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Link: https://lore.kernel.org/r/544c030f2a78c4adf3fe6b64f97a39cc1bbdabb9.1695296682.git.leon@kernel.orgSigned-off-by: Leon Romanovsky <leon@kernel.org>

Store the mlx5e priv devcom component within IPsec RoCE to enable
the IPsec RoCE code to access the other device's private information.
This includes retrieving the necessary device information and
the IPsec database, which helps determine if IPsec is configured or not.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Link: https://lore.kernel.org/r/5bb3160ceeb07523542302886da54c78eef0d2af.1695296682.git.leon@kernel.orgSigned-off-by: Leon Romanovsky <leon@kernel.org>

If the device is in MPV mode, the ethernet driver would now register
to events from IB driver about core devices affiliation or
de-affiliation.

Use the key provided in said event to connect each mlx5e priv
instance to it's master counterpart, this way the ethernet driver
is now aware of who is his master core device and even more, such
as knowing if partner device has IPsec configured or not.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Link: https://lore.kernel.org/r/279adfa0aa3a1957a339086f2c1739a50b8e4b68.1695296682.git.leon@kernel.orgSigned-off-by: Leon Romanovsky <leon@kernel.org>

Send blocking events from IB driver whenever the device is done being
affiliated or if it is removed from an affiliation.

This is useful since now the EN driver can register to those event and
know when a device is affiliated or not.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Link: https://lore.kernel.org/r/a7491c3e483cfd8d962f5f75b9a25f253043384a.1695296682.git.leon@kernel.orgSigned-off-by: Leon Romanovsky <leon@kernel.org>

IFC patch for "Add chunk mode support for mlx5 driver" VFIO series.

Link: https://lore.kernel.org/all/20230911093856.81910-1-yishaih@nvidia.com/Signed-off-by: Leon Romanovsky <leon@kernel.org>

* mlx5-vfio:
  net/mlx5: Introduce ifc bits for migration in a chunk mode

Introduce ifc related stuff to enable migration in a chunk mode.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20230911093856.81910-2-yishaih@nvidia.comReviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>

The IBTA specification 1.7 has new speed - XDR, supporting signaling
rate of 200Gb.

Ethtool support of IPoIB driver translates IB speed to signaling rate.
Added translation of XDR IB type to rate of 200Gb Ethernet speed.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/ca252b79b7114af967de3d65f9a38992d4d87a14.1695204156.git.leon@kernel.orgReviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>

Adjust mlx5 function which maps the speed rate from IB spec values
to internal driver values to be able to handle speeds up to 800Gb.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/301c803d8486b0df8aefad3fb3cc10dc58671985.1695204156.git.leon@kernel.orgReviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>

Rename 400G_8X speed to comply to naming convention.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/ac98447cac8379a43fbdb36d56e5fb2b741a97ff.1695204156.git.leon@kernel.orgReviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>

Add a check for 800G_8X speed when querying PTYS and report it back
correctly when needed.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/26fd0b6e1fac071c3eb779657bb3d8ba47f47c4f.1695204156.git.leon@kernel.orgReviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>

Under MAD query port, Report NDR speed when NDR is supported in the port
capability mask.
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/d30bdec2a66a8a2edd1d84ee61453c58cf346b43.1695204156.git.leon@kernel.orgReviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>

Add new IBTA speed XDR, the new rate that was added to Infiniband spec
as part of XDR and supporting signaling rate of 200Gb.

In order to report that value to rdma-core, add new u32 field to
query_port response.
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/9d235fc600a999e8274010f0e18b40fa60540e6c.1695204156.git.leon@kernel.orgReviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>

Currently, mkeys are managed via xarray. This implementation leads to
a degradation in cases many MRs are unregistered in parallel, due to xarray
internal implementation, for example: deregistration 1M MRs via 64 threads
is taking ~15% more time[1].

Hence, implement mkeys management via LIFO queue, which solved the
degradation.

[1]
2.8us in kernel v5.19 compare to 3.2us in kernel v6.4
Signed-off-by: Shay Drory <shayd@nvidia.com>
Link: https://lore.kernel.org/r/fde3d4cfab0f32f0ccb231cd113298256e1502c5.1695283384.git.leon@kernel.orgSigned-off-by: Leon Romanovsky <leon@kernel.org>