- 16 Nov, 2012 9 commits
-
-
Samuel Iglesias Gonsalvez authored
Its contents are merged into ipack.h. So this file is not needed. Doing that, it simplifies the ipack-related driver development. Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Samuel Iglesias Gonsalvez authored
Move ipack header files to include/linux/ directory where they belong. Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Samuel Iglesias Gonsalvez authored
Add Samuel Iglesias Gonsalvez, Jens Taprogge and Greg Kroah-Hartman as maintainers for the Industry Pack subsystem. Cc: Jens Taprogge <jens.taprogge@taprogge.org> Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
The ipack subsystem is cleaned up enough to now move out of the staging tree, and into drivers/ipack. Cc: Samuel Iglesias Gonsalvez <siglesias@igalia.com> Cc: Jens Taprogge <jens.taprogge@taprogge.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Samuel Iglesias Gonsalvez authored
Adapt the copyright clause to CERN guidelines, as it has the copyright over them. Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexandra Chin authored
Convert to MT-B because Synaptics touch devices are capable of tracking identifiable fingers. Signed-off-by: Alexandra Chin <alexandra.chin@tw.synaptics.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
The code is checkpatch clean, and the logic and flow looks good to me, so I don't think there's anything left to do here. Cc: Samuel Iglesias Gonsalvez <siglesias@igalia.com> Cc: Jens Taprogge <jens.taprogge@taprogge.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
as CONFIG_HOTPLUG is always enabled now, just remove the #ifdef logic in the ipack core for it if was disabled. Cc:Samuel Iglesias Gonsalvez <siglesias@igalia.com> Cc: Jens Taprogge <jens.taprogge@taprogge.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Harvey Yang authored
with the last detached port state file remaining, usbip reports error on attaching. So clean up the state files on detaching. Signed-off-by: Harvey Yang <harvey.huawei.yang@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 15 Nov, 2012 31 commits
-
-
Malcolm Priestley authored
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kumar Amit Mehta authored
Inspect the return value of register_netdev() in the driver probe routine and return -ENODEV in case of error. Signed-off-by: Kumar Amit Mehta <gmate.amit@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Use the new helpers in the step 3 tests of {ai,ao}_cmdtest(). Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kumar Amit Mehta authored
Inspect the return value of register_netdev() in the driver probe routine and return -ENODEV in case of error. Signed-off-by: Kumar Amit Mehta <gmate.amit@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
YAMANE Toshiaki authored
The following errors and warnings fixed. - ERROR: code indent should use tabs where possible - WARNING: please, no spaces at the start of a line Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
YAMANE Toshiaki authored
The following warning fixed. - WARNING: braces {} are not necessary for single statement blocks Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
YAMANE Toshiaki authored
The following warning fixed. - WARNING: braces {} are not necessary for single statement blocks Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
YAMANE Toshiaki authored
The following error fixed. - ERROR: "foo ** bar" should be "foo **bar" Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
YAMANE Toshiaki authored
The following errors fixed. - ERROR: "foo * bar" should be "foo *bar" Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
YAMANE Toshiaki authored
The following errors fixed. - ERROR: space prohibited after that '!' (ctx:BxW) Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
YAMANE Toshiaki authored
The following warnings fixed. - WARNING: braces {} are not necessary for single statement blocks Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
YAMANE Toshiaki authored
The following error fixed. - ERROR: "foo ** bar" should be "foo **bar" Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
YAMANE Toshiaki authored
The following warnings fixed. - WARNING: braces {} are not necessary for single statement blocks Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
YAMANE Toshiaki authored
The following warnings fixed. - WARNING: braces {} are not necessary for single statement blocks Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
YAMANE Toshiaki authored
The following warnings fixed. - WARNING: braces {} are not necessary for single statement blocks Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
YAMANE Toshiaki authored
The following errors fixed. - ERROR: "foo * bar" should be "foo *bar" Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
YAMANE Toshiaki authored
The following warnings fixed. - WARNING: braces {} are not necessary for single statement blocks Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
YAMANE Toshiaki authored
The following warning fixed. - WARNING: braces {} are not necessary for single statement blocks Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
YAMANE Toshiaki authored
The following error fixed. - ERROR: do not initialise statics to 0 or NULL Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
YAMANE Toshiaki authored
The following warnings fixed. - WARNING: braces {} are not necessary for any arm of this statement - WARNING: braces {} are not necessary for single statement blocks Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Stefan Hajnoczi authored
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Stefan Hajnoczi authored
CONFIG_LINE6_USB_DUMP_MIDI is no longer used by the code and therefore no longer plays a role in CONFIG_LINE6_USB_DUMP_ANY. Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Stefan Hajnoczi authored
ALSA amidi(1) and aseqdump(1) can be used to dump MIDI instead of manually dumping MIDI messages in the driver. The advantage of using these existing tools is that can be used at run-time rather than compile-time. Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Stefan Hajnoczi authored
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Stefan Hajnoczi authored
CONFIG_LINE6_USB_DUMP_CTRL is no longer used by the code and therefore no longer plays a role in CONFIG_LINE6_USB_DUMP_ANY. Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Stefan Hajnoczi authored
The usbmon feature should be used instead of manually dumping control URBs. There are a few advantages to using usbmon: * Can be turned on/off at runtime * Provides full USB-level traffic * tcpdump and wireshark support for powerful analysis * No driver-specific code is required Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bill Pemberton authored
The TIOCGSOFTCAR and TIOCSSOFTCAR ioctls are handled by the tty layer so the dgrp driver shouldn't try to deal with them itself. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ian Abbott authored
Apart from the somewhat unnecessary `BUG_ON()` calls, `comedi_pci_auto_config()` and `comedi_usb_auto_config()` are just one-line wrappers around `comedi_auto_config()`, and `comedi_pci_auto_unconfig()` and `comedi_usb_auto_unconfig()` are just one-line wrappers around `comedi_auto_unconfig()`. Convert them to inline functions and remove the `BUG_ON()` calls. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ian Abbott authored
No comedi drivers set the `attach_pci()` or `attach_usb()` handlers in their `struct comedi_driver` any longer as they have all been replaced with an `auto_attach()` handler. Also, no code calls the `attach_pci()` or `attach_usb()` handlers any longer. Remove them from `struct comedi_driver`. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ian Abbott authored
`comedi_auto_config()` just calls internal function `comedi_auto_config_helper()`, passing it a wrapper function `comedi_auto_config_wrapper()` to handle the specifics of checking and calling the low-level comedi driver's `auto_attach()` handler. Since there are no other callers of `comedi_auto_config_helper()` or `comedi_auto_config_wrapper()`, combine everything into the single exported function `comedi_auto_config()`. Change the ordering of the check for existence of the low-level comedi driver's `auto_attach()` handler and the allocation of the comedi minor device number. This means the log message warning of the absence of the handler now has to be refer to the hardware device instead of the not-yet-allocated comedi device. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ian Abbott authored
There is no need for `comedi_pci_auto_config()` and `comedi_usb_auto_config()` to check that `driver->auto_attach` is non-null before calling `comedi_auto_attach()` as this check is done by `comedi_auto_config()` itself (actually by `comedi_auto_config_wrapper()`). Remove the unnecessary checks. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-