Teach inode.c about list_move().

From: Jan Kara <jack@ucw.cz>

Change locking rules in quota code to fix lock ordering especially wrt
journal lock.  Also some unnecessary spinlocking is removed.  The locking
changes are mainly: dqptr_sem, dqio_sem are acquired only when transaction is
already started, dqonoff_sem before a transaction is started.  This change
requires some callbacks to ext3 (also implemented in this patch) to start
transaction before the locks are acquired.

From: Matt Porter <mporter@kernel.crashing.org>

This fixes a memory leak when freeing pgds on PPC44x.

From: Anton Blanchard <anton@samba.org>

UP compile fixes

From: Anton Blanchard <anton@samba.org>

Quieten NVRAM driver

From: Joel Schopp <jschopp@austin.ibm.com>

I was looking at rtas serialization for reasons I won't go into here.
While wandering through the code I found that two functions were not
properly serialized.  phys_call_rtas and phys_call_rtas_display_status are
the functions.  After looking further they are redundant and not
used anywhere at all.

From: Anton Blanchard <anton@samba.org>

DMA API updates, in particular adding the new cache flush interfaces.

From: Anton Blanchard <anton@samba.org>

Add smt_snooze_delay cpu sysfs attribute

From: Anton Blanchard <anton@samba.org>

Oops cleanup:

- Move prototypes into system.h
- Move the debugger hooks into die, all the calls sites were calling them.
- Handle bad values passed to prregs

From: Anton Blanchard <anton@samba.org>

From: Stephen Rothwell <sfr@canb.auug.org.au>

James Bottomley is right, this was a mistake.  This patch replaces
vio_dma_mapping_error with dma_mapping_error everywhere.

[PATCH] ppc64: change the iSeries virtual device drivers to use the vio infrastructure for DMA mapping

From: Stephen Rothwell <sfr@canb.auug.org.au>

This patch changes the iSeries virtual device drivers to use the
vio infrastructure for DMA mapping instead of the PCI infrastructure.
This is a step along the way to integrating them correctly into the
driver model.

From: Stephen Rothwell <sfr@canb.auug.org.au>

This patch consolidates some of the iommu DMA mapping routines.

From: Stephen Rothwell <sfr@canb.auug.org.au>

This is just a cleanup to use enum dma_data_direction for all APIs
except the pci_dma_ ones (since they are defined generically).

Also make most of the functions in arch/ppc64/kernel/pci_iommu.c
static.

From: Stephen Rothwell <sfr@canb.auug.org.au>

This patch uses enum dma_data_direction for the vio DMA api routines.
This allows us to remove some include of linux/pci.h.

Also missed some pci_dma_mapping_error uses.

From: Anton Blanchard <anton@samba.org>

Register secondary threads in NUMA init code

From: Anton Blanchard <anton@samba.org>

Add HW PMC support to oprofile

From: Anton Blanchard <anton@samba.org>

Add PMCs to sysfs.

From: Anton Blanchard <anton@samba.org>

Add some POWER5 specific optimisations:
- icache is coherent, no need to explicitly flush
- tlbie lock no longer required

From: Anton Blanchard <anton@samba.org>

Move sysfs specific stuff into sysfs.c

From: Anton Blanchard <anton@samba.org>

Update CPU features. Remove DABR feature, all cpus have it. Add MMCRA,
PMC8, SMT, COHERENT_ICACHE, LOCKLESS_TLBIE features

From: David Engebretsen <engebret@us.ibm.com>

Put SMT threads into global interrupt queue

From: Anton Blanchard <anton@samba.org>

Create xics get_irq_server and use it in enable/disable code.

From: Paul Mackerras <paulus@samba.org>

Create and use irq_offset_up/down, get_irq_desc, for_each_irq

From: Anton Blanchard <anton@samba.org>

Fix xics irq affinity bug. We were anding with cpu_online_map but werent
using the result later on.

From: Michael Strosaker <strosake@us.ibm.com>

Add RTAS os-term call for panic on pSeries

From: Joel Schopp <jschopp@austin.ibm.com>

Add support for hotplug cpus

From: Will Schmidt <willschm@us.ibm.com>

Additional PVR value for power5 processor

From: Jake Moilanen <moilanen@austin.ibm.com>

Misc rtasd fixes for some broken firmware versions.

From: Joel Schopp <jschopp@austin.ibm.com>

Fix includes to avoid the compiler warning:
arch/ppc64/xmon/start.c: In function `xmon_readchar':
arch/ppc64/xmon/start.c:104: warning: implicit declaration of function
`xmon_printf'

From: Jake Moilanen <moilanen@austin.ibm.com>

Change the loglevel of an error log printed so it
does not goto the console.  Since error logs can
be upto 2k in size, it can spam the console.

From: Will Schmidt <willschm@us.ibm.com>

Correct comments for the offsets of fields in paca

From: Jake Moilanen <moilanen@austin.ibm.com>

The JS20 uses devfn 0 for a HT->PCI bridge.  The PHB devfn
assumption does not hold for this case.

From: Jake Moilanen <moilanen@austin.ibm.com>

Allow PCI devices to use address that happens to fall in the ISA range,
but still protect against ISA device accesses when there is not an ISA
bus.

From: Anton Blanchard <anton@samba.org>

Disable SMT snooze by default

From: Olof Johansson <olof@austin.ibm.com>

RTAS on IBM pSeries runs in real mode, so all pointers being passed in to
it need to be in low memory.  There's two places in the RAS code that
passes in pointers to items on the stack, which might end up being above
the limit.

Below patch resolves this by creating a buffer in BSS + a lock for
serialization.  There's no reason to worry about contention on the lock,
since rtas_call() also serializes on a single spinlock and this is an
infrequent code path in the first place.

From: David Gibson <david@gibson.dropbear.id.au>

On PPC64, to deal with the restrictions imposed by the PPC MMU's segment
design, hugepages are only allowed to be mapping in two fixed address
ranges, one 2-3G (for use by 32-bit processes) and one 1-1.5T (for use in
64-bit processes).  This is quite limiting, particularly for 32-bit
processes which want to use a lot of large page memory.

This patch relaxes this restriction, and allows any of the low 16 segments
(i.e.  those below 4G) to be individually switched over to allow hugepage
mappings (provided the segment does not already have any normal page
mappings).  The 1-1.5T fixed range for 64-bit processes remains.

From: Stephen Rothwell <sfr@canb.auug.org.au>

This is the iSeries virtual ethernet driver.  David Gibson has taken you
previous comments and hopefully sitisfied most of them.  The driver has
also undergone some more testing which showed up some bugs which have been
addressed.

Unfortunately, Anton is about to submit some other patches of mine which
will sightly comflict with this.  I will send a patch shortly that will
(hopefully) fix that.

From: Paul Mackerras <paulus@samba.org>

This patch from Julie DeWandel exports the symbol itLpNaca on iSeries
machines, for the use of the viodasd driver.

From: Paul Mackerras <paulus@samba.org>

This patch from Julie DeWandel makes CONFIG_VT default to N on iSeries
machines which are using the iSeries virtual console driver viocons.c.  The
VT console and the viocons code can't coexist because they use the same tty
numbers, that is, viocons supplies /dev/tty1.  Without this patch the user
has to figure out somehow that s/he has to turn on CONFIG_EMBEDDED in order
to be able to turn off CONFIG_VT, which is really very non-obvious.