The generic irq affinity code limits us to a single cpu target regardless
of what the architecture supports.  If required this should be done in the
architecture specific ->set_affinity call.

With this patch ppc64 is able to select all cpus affinity again.
Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

From: Thomas Spatzier <tspat@de.ibm.com>

network driver changes:
 - qeth: Handle both VLAN_FRAME and INCLUDES_VLAN_TAG in qdio header.
 - qeth: Always save IP addresses registered on a card when going offline.
 - qeth: Check size of printk buffer to 4K for ipa_takeover, vipa & rxip.


From: Thomas Spatzier <tspat@de.ibm.com>,
      Heiko Carstens <heiko.carstens@de.ibm.com>

Thomas created the patch below which removes the hardcoded 3900 bytes
limit as suggested by Jeff Garzik. Please apply.

network driver changes:
 - qeth: Calculate end of sysfs data buffer correctly.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

From: Thomas Spatzier <tspat@de.ibm.com>
From: Peter Tiedemann <ptiedem@de.ibm.com>

network driver changes:
 - qeth: return -EINVAL if an skb is too large.
 - qeth: don't call netif_stop_queue after cable pull. Drop the
   packets instead.
 - qeth: fix race between SET_IP and SET_MC kernel thread by removing
   SET_MC thread and let the SET_IP thread do multicast requests as well.
 - qeth: make it compile without CONFIG_VLAN.
 - ctc: avoid compiler warnings.
 - lcs: write package sequence number to skb->cb.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

From: Gerald Schaefer <geraldsc@de.ibm.com>

z/VM monitor stream changes:
 - Add monitor control element to deal with end-of-frame records.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

From: Horst Hummel <horst.hummel@de.ibm.com>
From: Stefan Weinhuber <wein@de.ibm.com>

dasd driver changes:
 - Introduce "fixbuffers" dasd option that uses buffer pages for
   the dasd i/o similar to bounce buffers.
 - Fix I/O errors when using XRC.
 - Increment retry counter again if notifier callback is called with CIO_GONE.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

From: Carsten Otte <cotte@de.ibm.com>

dcss segment interface changes:
 - Add check when loading segments to avoid out of range mappings.
 - Add code to check for segment_load returning -ERANGE.
 - Rename segment_info to segment_type.
 - Restore previous segment state if reload fails.
 - Add segment_modify_shared() to change shared attributes of a dcss
   segment and use it in the dcss block device driver.
 - Add support for contiguous EW/EN multipart segments.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

From: Cornelia Huck <cohuck@de.ibm.com>
From: Steffen Thoss <thoss@de.ibm.com>

common i/o layer changes:
 - Delay re-registration of a subchannel with a different subchannel id
   until the ccw device removal triggered from the subchannels remove
   function has completed.
 - Fix check when to call unreg_rereg.
 - Fix get_disc_cdev_by_devno.
 - Activate the time delay disablement facility. This saves a few cycles
   in millicode processing.
 - Don't ifdef reset of busy start time.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

From: Martin Schwidefsky <schwidefsky@de.ibm.com>
From: Ulrich Weigand <uweigand@de.ibm.com>

s390 core changes:
 - Remove defines for kernel_stack_size and async_stack_size.
 - Reserve system call number for kexec.
 - Add cc-option check for new gcc option packed-stack.
 - Fix race on no_hz_cpu_mask in stop_hz_timer.
 - Fix ptrace to make it send a SIGTRAP before the first instruction
   of a single stepped signal handler is executed.
 - Use force_sig_info with a full siginfo structure for illegal operation.
 - Remove verbatim copy of si_codes from asm-s390/siginfo.h. Use the
   generic definitions.
 - Regenerate default configuration.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

What that patch does is making the first open _always_ assume that we need to
revalidate/reread partition table and kills partition-parsing in
register_disk(); instead we just have it do open/close and let the
revalidation path in open do the job.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

For reasons which escape me, blockdev_get_blocks() is returning -EIO if the
mapping request straddles the end of the disk.  This causes reads which
straddle end-of-disk to return -EIO.

Fix it up so that it correctly trims the returned result down to match the
size of the device, for both reads and writes.

If a write attempt is fully beyond end-of-device then return -EIO.  We never
get this far anyway, because generic_write_checks() will return -ENOSPC if all
of the write lies outside a blockdev's i_size.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This recent fix isn't quite right: it is causing smaller-than-expected I/Os to
be submitted when extending files, which causes AIO-based writes to oops.

So just revert it - the bug was really over in blockdev_get_blocks() anyway.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The DAC960 driver looks at PCI_Device->irq before calling
pci_enable_device(), which means it requests the wrong IRQ and hangs.
This fixes it. 

Thanks to Johannes Rommel for reporting the problem and testing the fix.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into pobox.com:/garz/repo/libata-2.6

Use SET_NETDEV_DEV() so that the device works correctly with udev.
Signed-off-by: Randy Dunlap <rddunlap@osdl.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Bug in dvd_read_manufact found by inspection.

Cc: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

I've written two document files, and packaged them as a patch.

Two things caught my eye while I was writing this up:

The header comments for CDROMREADRAW, CDROMREADMODE1, and CDROMREADMODE2
disagree with the actual source code.  The header comments imply that a
cdrom_read structure is used to pass data, but the source code actually
reads a cdrom_msf structure and then overwrites it with raw data.  I'm not
sure if there's a bug in the header comments, in the driver source, or I
misread something.

The CDROM_LOCKDOOR ioctl seems to lock/unlock all doors on all drives,
because it uses a global variable.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

It turns out that just blindly enabling read prefetch is wrong for the
older (and buggy) oz6833 bridge.  fixed in the attached patch.

- don't touch the oz6832/6833
- more verbose
- only set the read prefetch and the write burst bits

it broke on some old laptop with a cardbus tulip.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Simple fix to make pci_enable/disable symetric and avoid the warning on
module unload.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Added M6Ne PCI IDs in asus_hides_smbus_hostbridge() function
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Stephen Rothwell noted a case where one CPU was sitting in userspace, one
in stop_machine() waiting for everyone to enter stopmachine().  This can
happen if migration occurs at exactly the wrong time with more than 2 CPUS.
 Say we have 4 CPUS:

1) stop_machine() on CPU 0creates stopmachine() threads for CPUS 1, 2
   and 3, and yields waiting for them to migrate to their CPUs and
   ack.

2) stopmachine(2) gets rebalanced (probably on exec) to CPU 1.

3) stopmachine(2) calls set_cpus_allowed on CPU 1, sleeps awaiting
   migration thread.

4) stopmachine(1) calls set_cpus_allowed on CPU 0, moves onto CPU1 and
   starts spinning.

Now the migration thread never runs, and we deadlock.  The simplest
solution is for stopmachine() to yield until they are all in place.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

You can't call module_param et al inside a function.  It doesn't make
sense, and it doesn't work.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Move this error-handling into a separate function so that its sizeable stack
utilisation is avoided - generic_make_request() can be called recursively by
stacking drivers.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Here's a patch which fixes the deadlock Brad Fitzpatrick reported here:
http://lkml.org/lkml/2004/11/14/98

The meat of the problem is a locking order reversal between the XFS I/O
lock and the inode semaphore (i_sem).  When we mix a number of threads
doing both direct reads and writes, we hit an ABBA deadlock after a while
because direct-io.c is taking and dropping i_sem after the XFS read path
has already taken its I/O lock.  This is the wrong way around from XFS's
point of view, in particular its the opposite order to the XFS write path. 
So this patch changes the logic for direct reads in the DIO_OWN_LOCKING
case (i.e.  XFS-only case), but leaves things as is for the other two types
of locking.

Not real pretty, but fixes up the lock ordering and deadlock.

Oh, I have tested direct reads and writes on ext3 and block devices as
well, to ensure they still function correctly with the change (i.e.  they
don't regress, should be a no-op there) which covers the other locking
cases in __blockdev_direct_IO.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

When cont_prepare_write() is padding out the "hole" with zeroed pages it
doesn't increase i_size at the same time.  If writeback comes in during the
execution of cont_prepare_write(), block_write_full_page() will think that
these pages are outside i_size and will just clean the page without writing
it.

Fix that up by using generic_commit_write(), which will advance i_size for
each page as it is dirtied.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch fix a deadlock in CAPI device driver registration code and
reenable SMP for the activ AVM cards., also some minor cleanup and fixes.
Signed-off-by: Karsten Keil <kkeil@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Here is a patch to update AR camera device driver.

drivers/media/video/arv.c:

- Remove warnings; use module_param() instead of MODULE_PARM(), because
  MODULE_PARM() is deprecated.

- Fix white-space damages.
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Vadim says:

I was reading through the kernel/power/Kconfig file, and noticed that
the wording was slightly unclear. I poked at it a bit, hopefully making
the description a tad more straightforward, but you be the judge. :)
Diffed against 2.6.10-rc2.

From: Vadim Lobanov <vlobanov@speakeasy.net>
Signed-off-by: Vadim Lobanov <vlobanov@speakeasy.net>
Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Use time_after_eq instead of >=

From: Michal Schmidt <xschmi00@stud.feec.vutbr.cz>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

raid10 performs resync by reading all blocks, comparing to look for The
requires re-tasking a bio that was used to read, so that it can be re-used
for write.  So a number of fields need to be reset.

The bi_bdev field was not being reset.  However when using on a partition
of a device, it gets changed by generic_make_request.

This patch simply resets bi_bdev to the correct value.
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

With Chris Wright <chrisw@osdl.org>

struct task_struct.comm is defined to be 16 chars, but
arch/x86_64/sys_ia32.c:sys32_ni_syscall() and sys32_vm86_warning() copy it
into a static 8 byte buffer, which will surely cause problems.  This patch
makes lastcomm[] the right size, and makes sure it can't be overrun.  Since
the code also goes to the effort of getting a local copy of current in "me",
we may as well use it for printing the message.
Signed-off-by: Chris Wright <chrisw@osdl.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

 o General updates of MIPS to 2.6.10-rc2
 o Remove the Baget platform due to lack of maintenance over several years.
   Some of the drivers remain and will be removed in a separate patch.
 o Remove the HP Laserjet platform.  No user reports ever and no patches from
   the original submitters made this port a neat hack - and a directory full
   of clutter.
 o SMP support for the PMC-Sierra.
Signed-Off-By: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Patch from Holger Hans Peter Freyther

arch/arm/mach-sa1100/KConfig had options for USB client. The related code was removed early in 2.6. releases.
I think it is appropriate to remove the Config options for it itself, as they're void.



Signed-off-by: Holger Hans Peter Freyther
Signed-off-by: Russell King

Patch from Tony Lindgren

This patch by Tuukka Tikkanen & me cleans up the OMAP MPU timer
code to allow adding 32KHz timer support. Functionality is the
same as earlier.

Signed-off-by: Tony Lindgren 
Signed-off-by: Russell King

Patch from Nicolas Pitre

Those functions are marked __init and called from __init context
as well.  They have no business with modules what so ever.

Signed-off-by: Nicolas Pitre
Signed-off-by: Russell King

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Patch from Nicolas Pitre

Signed-off-by: Nicolas Pitre
Signed-off-by: Russell King