- 29 Feb, 2020 27 commits
-
-
Can Guo authored
Western Digital UFS devices require host's PA_TACTIVATE to be lower than device's PA_TACTIVATE, otherwise it may get stuck during hibern8 sequence. Link: https://lore.kernel.org/r/1582517363-11536-3-git-send-email-cang@codeaurora.orgReviewed-by:
Asutosh Das <asutoshd@codeaurora.org> Acked-by:
Avri Altman <avri.altman@wdc.com> Signed-off-by:
Can Guo <cang@codeaurora.org> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Can Guo authored
Currently ufshcd_vops_apply_dev_quirks() comes after all UniPro parameters have been tuned. Move it up so that vendors have a chance to apply device quirks in advance. Link: https://lore.kernel.org/r/1582517363-11536-2-git-send-email-cang@codeaurora.orgReviewed-by:
Stanley Chu <stanley.chu@mediatek.com> Signed-off-by:
-
Christoph Hellwig authored
Use an enum to specify the various quirks instead of #defines inside the structure definition. [mkp: fix typo] Link: https://lore.kernel.org/r/20200221140812.476338-3-hch@lst.deReviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Christoph Hellwig authored
Remove various quirks that don't have users, as well as the dead code keyed off them. Link: https://lore.kernel.org/r/20200221140812.476338-2-hch@lst.deReviewed-by:
-
Himanshu Madhani authored
Link: https://lore.kernel.org/r/20200226224022.24518-19-hmadhani@marvell.comSigned-off-by:
Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
-
Quinn Tran authored
When transitioning from loop to N2N, stale NPort ID is not re-assigned. Stale ID can collide with remote device. This patch will re-assign NPort ID on N2N is detected. Link: https://lore.kernel.org/r/20200226224022.24518-18-hmadhani@marvell.comSigned-off-by:
Quinn Tran <qutran@marvell.com> Signed-off-by:
-
Arun Easi authored
Certain state flags bit combinations are not checked and not handled correctly. Plus, do not log a normal underrun situation where there is no frame drop. Link: https://lore.kernel.org/r/20200226224022.24518-17-hmadhani@marvell.comSigned-off-by:
Arun Easi <aeasi@marvell.com> Signed-off-by:
-
Quinn Tran authored
T10-PI and FC-NVMe are not mutually exclusive. This patch removes restrictions where if FC-NVMe is enabled T10-PI defaults to disabled. Link: https://lore.kernel.org/r/20200226224022.24518-16-hmadhani@marvell.comSigned-off-by:
-
Quinn Tran authored
For N2N, fc_port struct is created during report id acquisition. At later time, the loop resync (fabric, n2n, loop) would trigger the rest of the login using the created fc_port struct. The loop resync logic can trigger another fc_port allocation if the 1st allocation was not able to execute. This patch prevents the 2nd allocation trigger. Link: https://lore.kernel.org/r/20200226224022.24518-15-hmadhani@marvell.comSigned-off-by:
-
Quinn Tran authored
NPIV re-enable code was blocked after FW had been initialized. The blocking check was too broad. Reduce the check to make sure if FW is initialized or not. Link: https://lore.kernel.org/r/20200226224022.24518-14-hmadhani@marvell.comSigned-off-by:
-
Quinn Tran authored
RPD information failed to display by switch cli command. This is caused by driver failure to properly format RDP response data with data descriptor to allow switch to parse it correctly. Link: https://lore.kernel.org/r/20200226224022.24518-13-hmadhani@marvell.comSigned-off-by:
-
Quinn Tran authored
For single port 28XX adapter, the second core can still run in the background. The flash semaphore can be held by the non-active core. This patch tell MPI FW to check for this case and clear the semaphore from the non-active core. Link: https://lore.kernel.org/r/20200226224022.24518-12-hmadhani@marvell.comSigned-off-by:
-
Quinn Tran authored
Per FW request, MB 1-7 should be logged for 8002 error. Link: https://lore.kernel.org/r/20200226224022.24518-11-hmadhani@marvell.comSigned-off-by:
-
Andrew Vasquez authored
commit e4e3a2ce ("scsi: qla2xxx: Add ability to autodetect SFP type") takes a heavy handed approach to BPM (Buffer Plus Management) enablement: 1) During hardware initialization, if an LR-capable transceiver is recognized, the driver schedules a disruptive post-initialization chip-reset (ISP-ABORT) to allow the BPM settings to be sent to the firmware. This chip-reset will result in (short-term) path-loss to all fc-rports and their attached SCSI devices. 2) LR-detection is triggered during any link-up event, resulting in a refresh and potential chip-reset Based on firmware-team guidance, upon LR-capable transceiver recognition, the driver's hardware initialization code will now re-execute firmware with the new BPM settings, then continue on with driver initialization. To address the second issue, the driver performs LR-capable detection upon the driver receiving a transceiver-insertion asynchronous event from firmware. No short-term path loss is needed with this new semantic. Link: https://lore.kernel.org/r/20200226224022.24518-10-hmadhani@marvell.comSigned-off-by:
Andrew Vasquez <andrewv@marvell.com> Signed-off-by:
-
Quinn Tran authored
This patch fixes issue where current and original exchanges count were swapped for intiator and targets. Also fix IOCB count for current and original which were swapped. Link: https://lore.kernel.org/r/20200226224022.24518-9-hmadhani@marvell.comSigned-off-by:
-
Andrew Vasquez authored
There's no point checking flags.disable_msix_handshake in the interrupt handler hot-path. Instead perform the check during queue-pair instantiation and use the proper interrupt handler. Link: https://lore.kernel.org/r/20200226224022.24518-8-hmadhani@marvell.comSigned-off-by:
-
Michael Hernandez authored
This patch ensures flash updates API calls return possible failure status through BSG interface to the application. Link: https://lore.kernel.org/r/20200226224022.24518-7-hmadhani@marvell.comSigned-off-by:
Michael Hernandez <mhernandez@marvell.com> Signed-off-by:
-
Michael Hernandez authored
This patch improved message for Secure Flash support. No functionality has been changed. Link: https://lore.kernel.org/r/20200226224022.24518-6-hmadhani@marvell.comSigned-off-by:
-
Quinn Tran authored
This patch fixes issue where incorrect flag was used for sending switch commands. Link: https://lore.kernel.org/r/20200226224022.24518-5-hmadhani@marvell.com Fixes: e8c72ba5 ("[SCSI] qla2xxx: Use GFF_ID to check FCP-SCSI FC4 type before logging into Nx_Ports") Fixes: a4239945 ("scsi: qla2xxx: Add switch command to simplify fabric discovery") Signed-off-by:
-
Giridhar Malavali authored
This patch uses generic firmware update options for FCoE based adapters as well to reduce code duplication. Link: https://lore.kernel.org/r/20200226224022.24518-4-hmadhani@marvell.comSigned-off-by:
Giridhar Malavali <gmalavali@marvell.com> Signed-off-by:
-
Giridhar Malavali authored
This patch moves ql2xrdpenable check earlier to avoids setting fw_option once again before exiting qla24xx_update_fw_options. Link: https://lore.kernel.org/r/20200226224022.24518-3-hmadhani@marvell.comSigned-off-by:
-
Himanshu Madhani authored
This patch adds 16.0GT for readable display string. Link: https://lore.kernel.org/r/20200226224022.24518-2-hmadhani@marvell.comSigned-off-by:
-
Bart Van Assche authored
This patch allows sparse to verify the endianness of the arguments passed to make_handle(). Link: https://lore.kernel.org/r/20200220043441.20504-5-bvanassche@acm.org Cc: Roman Bolshakov <r.bolshakov@yadro.com> Cc: Daniel Wagner <dwagner@suse.de> Cc: Martin Wilck <mwilck@suse.com> Cc: Quinn Tran <qutran@marvell.com> Reviewed-by:
Daniel Wagner <dwagner@suse.de> Reviewed-by:
Roman Bolshakov <r.bolshakov@yadro.com> Acked-by:
-
Bart Van Assche authored
This patch fixes the following sparse warnings: drivers/scsi/qla2xxx/qla_mbx.c:120:21: warning: restricted pci_channel_state_t degrades to integer drivers/scsi/qla2xxx/qla_mbx.c:120:37: warning: restricted pci_channel_state_t degrades to integer >From include/linux/pci.h: enum pci_channel_state { /* I/O channel is in normal state */ pci_channel_io_normal = (__force pci_channel_state_t) 1, /* I/O to channel is blocked */ pci_channel_io_frozen = (__force pci_channel_state_t) 2, /* PCI card is dead */ pci_channel_io_perm_failure = (__force pci_channel_state_t) 3, }; Link: https://lore.kernel.org/r/20200220043441.20504-4-bvanassche@acm.org Cc: Roman Bolshakov <r.bolshakov@yadro.com> Cc: Martin Wilck <mwilck@suse.com> Cc: Quinn Tran <qutran@marvell.com> Reviewed-by: -
Bart Van Assche authored
Instead of changing endianness in-place, write the data in CPU endian format in another buffer and copy that buffer back. This patch does not change any functionality but silences some sparse endianness warnings. Link: https://lore.kernel.org/r/20200220043441.20504-3-bvanassche@acm.org Cc: Roman Bolshakov <r.bolshakov@yadro.com> Cc: Martin Wilck <mwilck@suse.com> Cc: Quinn Tran <qutran@marvell.com> Reviewed-by:
-
Bart Van Assche authored
Since the SCSI core does not reuse the tag of the SCSI command that is being aborted by .eh_abort() before .eh_abort() has finished it is not necessary to check from inside that callback whether or not the SCSI command has already completed. Instead, rely on the firmware to return an error code when attempting to abort a command that has already completed. Additionally, rely on the firmware to return an error code when attempting to abort an already aborted command. In qla2x00_abort_srb(), use blk_mq_request_started() instead of sp->completed and sp->aborted. Link: https://lore.kernel.org/r/20200220043441.20504-2-bvanassche@acm.org Cc: Martin Wilck <mwilck@suse.com> Cc: Quinn Tran <qutran@marvell.com> Reviewed-by:
-
Himanshu Madhani authored
this patch fixes following sparse warnings >> drivers/scsi/qla2xxx/qla_tmpl.c:873:32: sparse: sparse: incorrect type in assignment (different base types) >> drivers/scsi/qla2xxx/qla_tmpl.c:873:32: sparse: expected unsigned int [usertype] capture_timestamp >> drivers/scsi/qla2xxx/qla_tmpl.c:873:32: sparse: got restricted __le32 [usertype] drivers/scsi/qla2xxx/qla_tmpl.c:885:29: sparse: sparse: incorrect type in assignment (different base types) >> drivers/scsi/qla2xxx/qla_tmpl.c:885:29: sparse: expected unsigned int vim +873 drivers/scsi/qla2xxx/qla_tmpl.c 869 870 static void 871 qla27xx_time_stamp(struct qla27xx_fwdt_template *tmp) 872 { > 873 tmp->capture_timestamp = cpu_to_le32(jiffies); 874 } 875 876 static void 877 qla27xx_driver_info(struct qla27xx_fwdt_template *tmp) 878 { 879 uint8_t v[] = { 0, 0, 0, 0, 0, 0 }; 880 881 WARN_ON_ONCE(sscanf(qla2x00_version_str, 882 "%hhu.%hhu.%hhu.%hhu.%hhu.%hhu", 883 v+0, v+1, v+2, v+3, v+4, v+5) != 6); 884 > 885 tmp->driver_info[0] = cpu_to_le32( 886 v[3] << 24 | v[2] << 16 | v[1] << 8 | v[0]); 887 tmp->driver_info[1] = cpu_to_le32(v[5] << 8 | v[4]); 888 tmp->driver_info[2] = __constant_cpu_to_le32(0x12345678); 889 } 890 Link: https://lore.kernel.org/r/20200227201148.13973-1-hmadhani@marvell.com Fixes: a31056dd ("scsi: qla2xxx: Use endian macros to assign static fields in fwdump header") Reported-by:kbuild test robot <lkp@intel.com> Signed-off-by:
-
- 24 Feb, 2020 13 commits
-
-
Colin Ian King authored
There is a spelling mistake in a lpfc_printf_vlog info message. Fix it. [mkp: fix spelling mistake in commit description] Link: https://lore.kernel.org/linux-scsi/20200221154841.77791-1-colin.king@canonical.comReviewed-by:
James Smart <james.smart@broadcom.com> Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Merlijn Wajer authored
When replacing the Big Kernel Lock in commit 2a48fc0a ("block: autoconvert trivial BKL users to private mutex"), the lock was replaced with a sr-wide lock. This causes very poor performance when using multiple sr devices, as the sr driver was not able to execute more than one command to one drive at any given time, even when there were many CD drives available. Replace the global mutex with per-sr-device mutex. Someone tried this patch at the time, but it never made it upstream, due to possible concerns with race conditions, but it's not clear the patch actually caused those: https://www.spinics.net/lists/linux-scsi/msg63706.html https://www.spinics.net/lists/linux-scsi/msg63750.html Also see http://lists.xiph.org/pipermail/paranoia/2019-December/001647.html Link: https://lore.kernel.org/r/20200218143918.30267-1-merlijn@archive.orgAcked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Merlijn Wajer <merlijn@archive.org> Signed-off-by:
-
Diego Elio Pettenò authored
This kernel configuration is basically enabling/disabling sr driver quirks detection. While these quirks are for fairly rare devices (very old CD burners, and a glucometer), the additional detection of these models is a very minimal amount of code. The logic behind the quirks is always built into the sr driver. This also removes the config from all the defconfig files that are enabling this already. Link: https://lore.kernel.org/r/20200223191144.726-1-flameeyes@flameeyes.comReviewed-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
Diego Elio Pettenò <flameeyes@flameeyes.com> Signed-off-by:
-
Hannes Reinecke authored
ch_mutex() was introduced with a mechanical conversion, but as we now have correct locking we can remove it altogether. Link: https://lore.kernel.org/r/20200213153207.123357-4-hare@suse.deReviewed-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
-
Hannes Reinecke authored
The 'ch' device node is created before the configuration is being read in, which leads to a race window when ch_open() is called before that. To avoid any races we should be taking the device mutex during ch_readconfig() and ch_init_elem(), and also during ch_open(). That ensures ch_probe is finished before ch_open() completes. Link: https://lore.kernel.org/r/20200213153207.123357-3-hare@suse.deReviewed-by:
-
Hannes Reinecke authored
The SCSI device is required to be present during ch_probe() and ch_open(). But the SCSI device itself is only checked during ch_open(), so it's anyones guess if it had been present during ch_probe(). And consequently we can't reliably detach it during ch_release(), as ch_remove() might have been called first. So initialize the changer device during ch_probe(), and take a reference to the SCSI device during both ch_probe() and ch_open(). [mkp: fixed checkpatch warning] Link: https://lore.kernel.org/r/20200213153207.123357-2-hare@suse.deReviewed-by:
-
Himanshu Madhani authored
Link: https://lore.kernel.org/r/20200212214436.25532-26-hmadhani@marvell.comSigned-off-by:
-
Himanshu Madhani authored
This patch uses QLA_FW_STOPPED macro so that flag is propogated to all the QPairs. Link: https://lore.kernel.org/r/20200212214436.25532-25-hmadhani@marvell.comSigned-off-by:
-
Himanshu Madhani authored
This patch fixes: - qla2x00_issue_iocb_timeout will now return if chip is down - only check for sp->qpair in abort handling Link: https://lore.kernel.org/r/20200212214436.25532-24-hmadhani@marvell.comSigned-off-by:
-
Himanshu Madhani authored
This patch fixes control flag options for login/logout IOCB. Link: https://lore.kernel.org/r/20200212214436.25532-23-hmadhani@marvell.comSigned-off-by:
-
Himanshu Madhani authored
Add missing rscn_gen when creating new fcport. Link: https://lore.kernel.org/r/20200212214436.25532-22-hmadhani@marvell.comSigned-off-by:
-
Quinn Tran authored
For ISP28xx, use 28xx call to retrieve active FW region. Link: https://lore.kernel.org/r/20200212214436.25532-21-hmadhani@marvell.comSigned-off-by:
-
Joe Carnuccio authored
Add port name in the messages file to help debugging of Login/Logout IOCBs Link: https://lore.kernel.org/r/20200212214436.25532-20-hmadhani@marvell.comSigned-off-by:
Joe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by:
-
