Like the previous fixes, the mixer accessors are converted to use
usb_mixer_elem_list objects.  In addition, the proper shutdown check
are put in get and put callbacks.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

A few FTU mixer controls have the own value handling, so they have to
be rewritten to follow the support for resume callbacks.  This ended
up in a fair amount of refactoring.  Its own struct is now removed,
instead the values are embedded in kctl private_value totally.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The changes at this time are a bit more wider than previous ones.
Firstly, the NI controls didn't cache the values, so I had to
implement the caching.  It's stored in bit 24 of private_value.
In addition to that, the initial values have to be read from
registers.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Again another quirk fix, just convert to usb_mixer_elem_list with the
resume callback for Mbox 1 stuff.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This time it's about Xonar U1: add the proper resume support for
"Digital Playback Switch" element.

Also, the status is moved into kcontrol private_value from
usb_mixer_interface struct field.  One more cut.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Similar as the previous fix, this adds the proper resume support to
Emu0202 "Front Jack Channels" enum mixer element.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Rewrite the code to handle LEDs on audigy2nx and co for supporting the
proper resume.  A new internal helper function
add_single_ctl_with_resume() is introduced to manage the
usb_mixer_elem_list more easily.

Also while we're at it, move audigy2nx_leds[] in usb_mixer_interface
struct into the private_value of each kctl, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

So far, we blindly assumed that the all usb-audio mixer elements
follow the standard and apply the standard resume method for the
registered elements in the id_elems[] list.  However, some quirks
really need the own resume and it's incomplete for now.

This patch enhances the resume handling in two folds:
- split some fields in struct usb_mixer_elem_info into a smaller
  header struct (usb_mixer_elem_list) for keeping the minimal
  information in the linked-list; the usb_mixer_elem_info embeds this
  header struct instead
- add resume and dump callbacks to usb_mixer_elem_list struct to allow
  quirks providing the own methods

For the standard mixer elements, these new callbacks are set to the
standard ones as default, thus there is no functional change by this
patch yet.

The dump and resume callbacks are typedef'ed for ease of later patches
using arrays of such function pointers.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Introduce an internal helper macro for avoiding many open codes.

The only slight behavior change is in a couple of get ballcks where
the value is reset at error no matter whether ignore_ctl_error is set
or not.  Actually this is even safer than before.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

snd_nativeinstruments_control_get() uses a stack as a buffer for
usb_control_msg(), but it's basically not allowed.  Replace the call
with a safer helper, snd_usb_ctl_msg(), instead.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

There are a few duplicated codes handling the mute and mic-mute LEDs
via GPIO pins.  Let's consolidate to single helpers.  Here we
introduced two new fields to alc_spec, gpio_mute_led_mask and
gpio_mic_led_mask, to contain the bit mask to set/clear.  Also,
mute_led_polarity is evaluated as well.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Complete missing parameters, correct wrong reference, and add an explaination
about the differences between the latest specification and our implementation.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The microphone mute led on the Latitude E5550 can't work. We need to
apply DELL_WMI_MIC_MUTE_LED quirk to this machine.

The machine uses alc293 codec and already applied the quirk
ALC293_FIXUP_DELL1_MIC_NO_PRESENCE through pin_fixup_tbl[].

Here we just let DELL_WMI_MIC_MUTE_LED be chained to
ALC269_FIXUP_HEADSET_MODE, then the machine will have these
quirks ALC293_FIXUP_DELL1_MIC_NO_PRESENCE-->
ALC269_FIXUP_HEADSET_MODE-->ALC255_FIXUP_DELL_WMI_MIC_MUTE_LED.

BugLink: https://bugs.launchpad.net/bugs/1381856Reported-and-tested-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

We have one more Dell machine needs DELL_WMI_MIC_MUTE_LED quirk, but
the machine uses alc293 instead of alc255. So if
DELL_WMI_MIC_MUTE_LED still chain ALC255_FIXUP_DELL1_MIC_NO_PRESENCE,
the machine can't use this quirk.

To change this situation, let the DELL_WMI_MIC_MUTE_LED to be a
standalone quirk, and let other quirks chain it.

After this change, this quirk can be chained to any existing quirks,
and as a result, it is possible that this quirk is applied to
a non-Dell machine or a Dell machine without mic mute led on it, but
it is still safe since alc_fixup_dell_wmi() will return an error in
these situations.

And remove the quirk for machine with subsystem id 0x6010 and 0x601f,
these two machines will fall back to the quirk
ALC255_FIXUP_DELL1_MIC_NO_PRESENCE-->ALC255_FIXUP_HEADSET_MODE-->
ALC255_FIXUP_DELL_WMI_MIC_MUTE_LED through pin_fixup_tbl[].

BugLink: https://bugs.launchpad.net/bugs/1381856Reported-and-tested-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'asoc-v3.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v3.18

As well as the usual driver fixes there's a few other things here:

One is a fix for a race in DPCM which is unfortuantely a rather large
diffstat, this is the result of growing usage of the mainline code and
hence more detailed testing so I'm relatively happy.

The other is a fix for non-DT machine driver matching following some of
the componentization work which is much more focused.

Both have had a while to cook in -next.

Merge remote-tracking branches 'asoc/fix/rt5670', 'asoc/fix/samsung' and 'asoc/fix/sgtl5000' into asoc-linus

Merge remote-tracking branches 'asoc/fix/adsp', 'asoc/fix/cs41l51', 'asoc/fix/dpcm', 'asoc/fix/es8328', 'asoc/fix/fsl-asrc', 'asoc/fix/max98090', 'asoc/fix/rcar', 'asoc/fix/rockchip' and 'asoc/fix/rt5645' into asoc-linus

We should not free any buffers associated with writing out coefficients
to the DSP until all the async writes have completed. This patch updates
the out of memory path when allocating a new buffer to include a call to
regmap_async_complete.
Reported-by: JS Park <aitdark.park@samsung.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org

Specified in section 5.2.5.6.1 of the USB Audio Class 2.0 definition.

Solves the following error for C-Media 6632A (Asus Xonar U7):
[ 8219.676164] cannot get ctl value: req = 0x81, wValue = 0x0, wIndex = 0x1400, type = 3
Signed-off-by: Johan Rastén <johan@oljud.se>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The pci_dev_put() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The release_firmware() function tests whether its argument is NULL and then
return immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The vfree() function performs also input parameter validation. Thus the test
around the call is not needed.

This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The snd_ac97_resume() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The functions kfree() and release_firmware() test whether their argument
is NULL and then return immediately. Thus the test around the call
is not needed.

This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Pull ARM SoC fixes from Olof Johansson:
 "Another small set of fixes:

   - some DT compatible typo fixes
   - irq setup fix dealing with irq storms on orion
   - i2c quirk generalization for mvebu
   - a handful of smaller fixes for OMAP
   - a couple of added file patterns for OMAP entries in MAINTAINERS"

* tag 'armsoc-for-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: at91/dt: Fix sama5d3x typos
  pinctrl: dra: dt-bindings: Fix output pull up/down
  MAINTAINERS: Update entry for omap related .dts files to cover new SoCs
  MAINTAINERS: add more files under OMAP SUPPORT
  ARM: dts: AM437x-SK-EVM: Fix DCDC3 voltage
  ARM: dts: AM437x-GP-EVM: Fix DCDC3 voltage
  ARM: dts: AM43x-EPOS-EVM: Fix DCDC3 voltage
  ARM: dts: am335x-evm: Fix 5th NAND partition's name
  ARM: orion: Fix for certain sequence of request_irq can cause irq storm
  ARM: mvebu: armada xp: Generalize use of i2c quirk

Pull sparc fixes from David Miller:

 1) Fix NULL oops in Schizo PCI controller error handler.

 2) Fix race between xchg and other operations on 32-bit sparc, from
    Andreas Larsson.

 3) swab*() helpers need a dummy memory input operand to show data flow
    on 64-bit sparc.

 4) Fix RCU warnings due to missing irq_{enter,exit}() around
    generic_smp_call_function*() calls.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: Fix constraints on swab helpers.
  sparc32: Implement xchg and atomic_xchg using ATOMIC_HASH locks
  sparc64: Do irq_{enter,exit}() around generic_smp_call_function*().
  sparc64: Fix crashes in schizo_pcierr_intr_other().

Pull md bugfix from Neil Brown:
 "One fix for md for 3.18.

  This fixes a regression introduced in 3.13"

* tag 'md/3.18-fix' of git://neil.brown.name/md:
  md: Always set RECOVERY_NEEDED when clearing RECOVERY_FROZEN

Some DT files had a typo with a missing "5" in sama5d3x first compatible string.
Signed-off-by: Peter Rosin <peda@axentia.se>
[nicolas.ferre@atmel.com: modify commit log]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-fixes-against-v3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

Merge "omap fixes against v3.18-rc4" from Tony Lindgren:

Few omap fixes for hangs and wrong pinctrl defines, and update
MAINTAINERS file to avoid missing PMIC and SoC related patches:

- Fix random hangs on am437x because of incorrect default
  value for the DDR regulator

- Fix wrong partition name for NAND on am335x-evm

- Fix wrong pinctrl defines for dra7xx

- Update maintainers entries for PMICs and SoCs

* tag 'omap-fixes-against-v3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  pinctrl: dra: dt-bindings: Fix output pull up/down
  MAINTAINERS: Update entry for omap related .dts files to cover new SoCs
  MAINTAINERS: add more files under OMAP SUPPORT
  ARM: dts: AM437x-SK-EVM: Fix DCDC3 voltage
  ARM: dts: AM437x-GP-EVM: Fix DCDC3 voltage
  ARM: dts: AM43x-EPOS-EVM: Fix DCDC3 voltage
  ARM: dts: am335x-evm: Fix 5th NAND partition's name
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge "mvebu fixes for v3.18" from Jason Cooper:

 - Armada XP
    - Generalize i2c quirk

 - orion
    - Fix irq storm caused by specific sequence of request_irq

* tag 'mvebu-fixes-3.18' of git://git.infradead.org/linux-mvebu:
  ARM: orion: Fix for certain sequence of request_irq can cause irq storm
  ARM: mvebu: armada xp: Generalize use of i2c quirk

md_check_recovery will skip any recovery and also clear
MD_RECOVERY_NEEDED if MD_RECOVERY_FROZEN is set.
So when we clear _FROZEN, we must set _NEEDED and ensure that
md_check_recovery gets run.
Otherwise we could miss out on something that is needed.

In particular, this can make it impossible to remove a
failed device from an array is the  'recovery-needed' processing
didn't happen.
Suitable for stable kernels since 3.13.

Cc: stable@vger.kernel.org (3.13+)
Reported-and-tested-by: Joe Lawrence <joe.lawrence@stratus.com>
Fixes: 30b8feb7Signed-off-by: NeilBrown <neilb@suse.de>

We are reading the memory location, so we have to have a memory
constraint in there purely for the sake of showing the data flow
to the compiler.
Reported-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull SCSI fixes from James Bottomley:
 "This is a set of six fixes and a MAINTAINER update.

  The fixes are two multipath (one in Test Unit Ready handling for the
  path checkers and one in the section of code that sends a start unit
  after failover; both of these were perturbed by the scsi-mq update), a
  CD-ROM door locking fix that was likewise introduced by scsi-mq and
  three driver fixes for a previous code update in cxgb4i, megaraid_sas
  and bnx2fc"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  bnx2fc: fix tgt spinlock locking
  megaraid_sas: fix bug in handling return value of pci_enable_msix_range()
  cxgb4i: send abort_rpl correctly
  cxgbi: add maintainer for cxgb3i/cxgb4i
  scsi: TUR path is down after adapter gets reset with multipath
  scsi: call device handler for failed TUR command
  scsi: only re-lock door after EH on devices that were reset

Pull x86 fixes from Ingo Molnar:
 "Microcode fixes, a Xen fix and a KASLR boot loading fix with certain
  memory layouts"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, microcode, AMD: Fix ucode patch stashing on 32-bit
  x86/core, x86/xen/smp: Use 'die_complete' completion when taking CPU down
  x86, microcode: Fix accessing dis_ucode_ldr on 32-bit
  x86, kaslr: Prevent .bss from overlaping initrd
  x86, microcode, AMD: Fix early ucode loading on 32-bit

Al Viro pointed out that the x86-64 csum_partial_copy_from_user() is
somewhat confused about what it should do on errors, notably it mostly
clears the uncopied end result buffer, but misses that for the initial
alignment case.

All users should check for errors, so it's dubious whether the clearing
is even necessary, and Al also points out that we should probably clean
up the calling conventions, but regardless of any future changes to this
function, the fact that it is inconsistent is just annoying.

So make the __get_user() failure path use the same error exit as all the
other errors do.
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Miller <davem@davemloft.net>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patch adds a USB control message delay quirk for a few specific Marantz/Denon
devices. Without the delay the DACs will not work properly and produces the
following type of messages:

Nov 15 10:09:21 orwell kernel: [   91.342880] usb 3-13: clock source 41 is not valid, cannot use
Nov 15 10:09:21 orwell kernel: [   91.343775] usb 3-13: clock source 41 is not valid, cannot use

There are likely other Marantz/Denon devices using the same USB module which exhibit the
same problems. But as this cannot be verified I limited the patch to the devices
I could test.

The following two devices are covered by this path:
- Marantz SA-14S1
- Marantz HD-DAC1
Signed-off-by: Jurgen Kramer <gtmkramer@xs4all.nl>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Pull ARM fixes from Russell King:
 "Two fixes this time, one to ensure that the kuser helper option
  depends on MMU as they aren't available for noMMU targets (and if the
  option is selected, we end up oopsing.)

  The second fix plugs a corner case with the decompressor, ensuring
  that the instruction stream can see the relocated code in every case
  on ARMv7 CPUs"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: 8198/1: make kuser helpers depend on MMU
  ARM: 8191/1: decompressor: ensure I-side picks up relocated code