- 20 Aug, 2016 40 commits
-
-
Ben Hutchings authored
[ Upstream commit 99965378 ] Use set_posix_acl, which includes proper permission checks, instead of calling ->set_acl directly. Without this anyone may be able to grant themselves permissions to a file by setting the ACL. Lock the inode to make the new checks atomic with respect to set_acl. (Also, nfsd was the only caller of set_acl not locking the inode, so I suspect this may fix other races.) This also simplifies the code, and ensures our ACLs are checked by posix_acl_valid. The permission checks and the inode locking were lost with commit 4ac7249e, which changed nfsd to use the set_acl inode operation directly instead of going through xattr handlers. Reported-by:
David Sinquin <david@sinquin.eu> [agreunba@redhat.com: use set_posix_acl] Fixes: 4ac7249e Cc: Christoph Hellwig <hch@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: stable@vger.kernel.org Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com>
-
Andreas Gruenbacher authored
[ Upstream commit 485e71e8 ] Factor out part of posix_acl_xattr_set into a common function that takes a posix_acl, which nfsd can also call. The prototype already exists in include/linux/posix_acl.h. Signed-off-by:
Andreas Gruenbacher <agruenba@redhat.com> Cc: stable@vger.kernel.org Cc: Christoph Hellwig <hch@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Gavin Shan authored
[ Upstream commit 8a934efe ] In commit 8445a87f "powerpc/iommu: Remove the dependency on EEH struct in DDW mechanism", the PE address was replaced with the PCI config address in order to remove dependency on EEH. According to PAPR spec, firmware (pHyp or QEMU) should accept "xxBBSSxx" format PCI config address, not "xxxxBBSS" provided by the patch. Note that "BB" is PCI bus number and "SS" is the combination of slot and function number. This fixes the PCI address passed to DDW RTAS calls. Fixes: 8445a87f ("powerpc/iommu: Remove the dependency on EEH struct in DDW mechanism") Cc: stable@vger.kernel.org # v3.4+ Reported-by:
Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Tested-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Guilherme G. Piccoli authored
[ Upstream commit 8445a87f ] Commit 39baadbf ("powerpc/eeh: Remove eeh information from pci_dn") changed the pci_dn struct by removing its EEH-related members. As part of this clean-up, DDW mechanism was modified to read the device configuration address from eeh_dev struct. As a consequence, now if we disable EEH mechanism on kernel command-line for example, the DDW mechanism will fail, generating a kernel oops by dereferencing a NULL pointer (which turns to be the eeh_dev pointer). This patch just changes the configuration address calculation on DDW functions to a manual calculation based on pci_dn members instead of using eeh_dev-based address. No functional changes were made. This was tested on pSeries, both in PHyp and qemu guest. Fixes: 39baadbf ("powerpc/eeh: Remove eeh information from pci_dn") Cc: stable@vger.kernel.org # v3.4+ Reviewed-by:
-
Vegard Nossum authored
[ Upstream commit 77da1605 ] I got a KASAN report of use-after-free: ================================================================== BUG: KASAN: use-after-free in klist_iter_exit+0x61/0x70 at addr ffff8800b6581508 Read of size 8 by task trinity-c1/315 ============================================================================= BUG kmalloc-32 (Not tainted): kasan: bad access detected ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Allocated in disk_seqf_start+0x66/0x110 age=144 cpu=1 pid=315 ___slab_alloc+0x4f1/0x520 __slab_alloc.isra.58+0x56/0x80 kmem_cache_alloc_trace+0x260/0x2a0 disk_seqf_start+0x66/0x110 traverse+0x176/0x860 seq_read+0x7e3/0x11a0 proc_reg_read+0xbc/0x180 do_loop_readv_writev+0x134/0x210 do_readv_writev+0x565/0x660 vfs_readv+0x67/0xa0 do_preadv+0x126/0x170 SyS_preadv+0xc/0x10 do_syscall_64+0x1a1/0x460 return_from_SYSCALL_64+0x0/0x6a INFO: Freed in disk_seqf_stop+0x42/0x50 age=160 cpu=1 pid=315 __slab_free+0x17a/0x2c0 kfree+0x20a/0x220 disk_seqf_stop+0x42/0x50 traverse+0x3b5/0x860 seq_read+0x7e3/0x11a0 proc_reg_read+0xbc/0x180 do_loop_readv_writev+0x134/0x210 do_readv_writev+0x565/0x660 vfs_readv+0x67/0xa0 do_preadv+0x126/0x170 SyS_preadv+0xc/0x10 do_syscall_64+0x1a1/0x460 return_from_SYSCALL_64+0x0/0x6a CPU: 1 PID: 315 Comm: trinity-c1 Tainted: G B 4.7.0+ #62 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 ffffea0002d96000 ffff880119b9f918 ffffffff81d6ce81 ffff88011a804480 ffff8800b6581500 ffff880119b9f948 ffffffff8146c7bd ffff88011a804480 ffffea0002d96000 ffff8800b6581500 fffffffffffffff4 ffff880119b9f970 Call Trace: [<ffffffff81d6ce81>] dump_stack+0x65/0x84 [<ffffffff8146c7bd>] print_trailer+0x10d/0x1a0 [<ffffffff814704ff>] object_err+0x2f/0x40 [<ffffffff814754d1>] kasan_report_error+0x221/0x520 [<ffffffff8147590e>] __asan_report_load8_noabort+0x3e/0x40 [<ffffffff83888161>] klist_iter_exit+0x61/0x70 [<ffffffff82404389>] class_dev_iter_exit+0x9/0x10 [<ffffffff81d2e8ea>] disk_seqf_stop+0x3a/0x50 [<ffffffff8151f812>] seq_read+0x4b2/0x11a0 [<ffffffff815f8fdc>] proc_reg_read+0xbc/0x180 [<ffffffff814b24e4>] do_loop_readv_writev+0x134/0x210 [<ffffffff814b4c45>] do_readv_writev+0x565/0x660 [<ffffffff814b8a17>] vfs_readv+0x67/0xa0 [<ffffffff814b8de6>] do_preadv+0x126/0x170 [<ffffffff814b92ec>] SyS_preadv+0xc/0x10 This problem can occur in the following situation: open() - pread() - .seq_start() - iter = kmalloc() // succeeds - seqf->private = iter - .seq_stop() - kfree(seqf->private) - pread() - .seq_start() - iter = kmalloc() // fails - .seq_stop() - class_dev_iter_exit(seqf->private) // boom! old pointer As the comment in disk_seqf_stop() says, stop is called even if start failed, so we need to reinitialise the private pointer to NULL when seq iteration stops. An alternative would be to set the private pointer to NULL when the kmalloc() in disk_seqf_start() fails. Cc: stable@vger.kernel.org Signed-off-by:
Vegard Nossum <vegard.nossum@oracle.com> Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
James Hogan authored
[ Upstream commit 6154c187 ] The LNKGET based atomic sequence in __cmpxchg_u32 has slightly incorrect constraints for the return value which under certain circumstances can allow an address unit register to be used as the first operand of a CMP instruction. This isn't a valid instruction however as the encodings only allow a data unit to be specified. This would result in an assembler error like the following: Error: failed to assemble instruction: "CMP A0.2,D0Ar6" Fix by changing the constraint from "=&da" (assigned, early clobbered, data or address unit register) to "=&d" (data unit register only). The constraint for the second operand, "bd" (an op2 register where op1 is a data unit register and the instruction supports O2R) is already correct assuming the first operand is a data unit register. Other cases of CMP in inline asm have had their constraints checked, and appear to all be fine. Fixes: 6006c0d8 ("metag: Atomics, locks and bitops") Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: linux-metag@vger.kernel.org Cc: <stable@vger.kernel.org> # 3.9.x- Signed-off-by:
-
Hui Wang authored
[ Upstream commit 59ec4b57 ] One of the machines has ALC255 on it, another one has ALC298 on it. On the machine with the codec ALC298, it also has the speaker volume problem, so we add the fixup chained to ALC298_FIXUP_SPK_VOLUME rather than adding a group of pin definition in the pin quirk table, since the speak volume problem does not happen on other machines yet. Cc: <stable@vger.kernel.org> Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Woodrow Shen authored
[ Upstream commit e9c28e16 ] When the headset was plugged in the Dell desktop, the mic of headset can't be detected and workable. According to the alsa-info, we found the differece between alsa and init_pin_configs on the machine, so we need to add the pin configs to make headset work. Codec: Realtek ALC3234 Vendor Id: 0x10ec0255 Subsystem Id: 0x102806bb BugLink: https://bugs.launchpad.net/bugs/1477900Signed-off-by:
Woodrow Shen <woodrow.shen@canonical.com> Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit 33baefe5 ] krealloc() doesn't work always properly with __GFP_ZERO flag as expected. For clearing the reallocated area, we need to clear explicitly instead. Reported-by:
Joe Perches <joe@perches.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Maruthi Srinivas Bayyavarapu authored
[ Upstream commit fd48331f ] This commit fixes garbled audio on Bonaire HDMI Signed-off-by:
Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Matt Redfearn authored
[ Upstream commit 4f53989b ] Commit a168b8f1 ("MIPS: mm: Add MIPS R6 instruction encodings") added an incorrect definition of the redefined MIPSr6 cache instruction. Executing any kernel code including this instuction results in a reserved instruction exception and kernel panic. Fix the instruction definition. Fixes: a168b8f1Signed-off-by:
Matt Redfearn <matt.redfearn@imgtec.com> Cc: <stable@vger.kernel.org> # 4.x- Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13663/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Fabian Frederick authored
[ Upstream commit 9b24fef9 ] Commit 53dad6d3 ("ipc: fix race with LSMs") updated ipc_rcu_putref() to receive rcu freeing function but used generic ipc_rcu_free() instead of msg_rcu_free() which does security cleaning. Running LTP msgsnd06 with kmemleak gives the following: cat /sys/kernel/debug/kmemleak unreferenced object 0xffff88003c0a11f8 (size 8): comm "msgsnd06", pid 1645, jiffies 4294672526 (age 6.549s) hex dump (first 8 bytes): 1b 00 00 00 01 00 00 00 ........ backtrace: kmemleak_alloc+0x23/0x40 kmem_cache_alloc_trace+0xe1/0x180 selinux_msg_queue_alloc_security+0x3f/0xd0 security_msg_queue_alloc+0x2e/0x40 newque+0x4e/0x150 ipcget+0x159/0x1b0 SyS_msgget+0x39/0x40 entry_SYSCALL_64_fastpath+0x13/0x8f Manfred Spraul suggested to fix sem.c as well and Davidlohr Bueso to only use ipc_rcu_free in case of security allocation failure in newary() Fixes: 53dad6d3 ("ipc: fix race with LSMs") Link: http://lkml.kernel.org/r/1470083552-22966-1-git-send-email-fabf@skynet.beSigned-off-by:
Fabian Frederick <fabf@skynet.be> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: <stable@vger.kernel.org> [3.12+] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Jia He authored
[ Upstream commit 649920c6 ] In powerpc servers with large memory(32TB), we watched several soft lockups for hugepage under stress tests. The call traces are as follows: 1. get_page_from_freelist+0x2d8/0xd50 __alloc_pages_nodemask+0x180/0xc20 alloc_fresh_huge_page+0xb0/0x190 set_max_huge_pages+0x164/0x3b0 2. prep_new_huge_page+0x5c/0x100 alloc_fresh_huge_page+0xc8/0x190 set_max_huge_pages+0x164/0x3b0 This patch fixes such soft lockups. It is safe to call cond_resched() there because it is out of spin_lock/unlock section. Link: http://lkml.kernel.org/r/1469674442-14848-1-git-send-email-hejianet@gmail.comSigned-off-by:
Jia He <hejianet@gmail.com> Reviewed-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Dave Hansen <dave.hansen@linux.intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Mike Snitzer authored
[ Upstream commit eaf9a736 ] Otherwise, there is potential for both DMF_SUSPENDED* and DMF_NOFLUSH_SUSPENDING to not be set during dm_suspend() -- which is definitely _not_ a valid state. This fix, in conjuction with "dm rq: fix the starting and stopping of blk-mq queues", addresses the potential for request-based DM multipath's __multipath_map() to see !dm_noflush_suspending() during suspend. Reported-by:
Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Sasha Levin authored
[ Upstream commit 7d9595d8 ] Improve dm_stop_queue() to cancel any requeue_work. Also, have dm_start_queue() and dm_stop_queue() clear/set the QUEUE_FLAG_STOPPED for the blk-mq request_queue. On suspend dm_stop_queue() handles stopping the blk-mq request_queue BUT: even though the hw_queues are marked BLK_MQ_S_STOPPED at that point there is still a race that is allowing block/blk-mq.c to call ->queue_rq against a hctx that it really shouldn't. Add a check to dm_mq_queue_rq() that guards against this rarity (albeit _not_ race-free). Signed-off-by:
-
Mike Snitzer authored
[ Upstream commit 99f3c90d ] When the corrupt_bio_byte feature was introduced it caused READ bios to no longer be errored with -EIO during the down_interval. This had to do with the complexity of needing to submit READs if the corrupt_bio_byte feature was used. Fix it so READ bios are properly errored with -EIO; doing so early in flakey_map() as long as there isn't a match for the corrupt_bio_byte feature. Fixes: a3998799 ("dm flakey: add corrupt_bio_byte feature") Reported-by:
Akira Hayakawa <ruby.wktk@gmail.com> Signed-off-by:
-
Laura Abbott authored
[ Upstream commit b2e1c26f ] glibc recently did a sync up (94e73c95d9b5 "elf.h: Sync with the gabi webpage") that added a #define for EM_METAG but did not add relocations This triggers build errors: scripts/recordmcount.c: In function 'do_file': scripts/recordmcount.c:466:28: error: 'R_METAG_ADDR32' undeclared (first use in this function) case EM_METAG: reltype = R_METAG_ADDR32; ^~~~~~~~~~~~~~ scripts/recordmcount.c:466:28: note: each undeclared identifier is reported only once for each function it appears in scripts/recordmcount.c:468:20: error: 'R_METAG_NONE' undeclared (first use in this function) rel_type_nop = R_METAG_NONE; ^~~~~~~~~~~~ Work around this change with some more #ifdefery for the relocations. Fedora Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1354034 Link: http://lkml.kernel.org/r/1468005530-14757-1-git-send-email-labbott@redhat.com Cc: stable@vger.kernel.org # v3.9+ Cc: James Hogan <james.hogan@imgtec.com> Fixes: 00512bdd ("metag: ftrace support") Reported-by:
Ross Burton <ross.burton@intel.com> Signed-off-by:
Laura Abbott <labbott@redhat.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Konstantin Neumoin authored
[ Upstream commit 37cf99e0 ] The balloon has a special mechanism that is subscribed to the oom notification which leads to deflation for a fixed number of pages. The number is always fixed even when the balloon is fully deflated. But leak_balloon did not expect that the pages to deflate will be more than taken, and raise a "BUG" in balloon_page_dequeue when page list will be empty. So, the simplest solution would be to check that the number of releases pages is less or equal to the number taken pages. Cc: stable@vger.kernel.org Signed-off-by:
Konstantin Neumoin <kneumoin@virtuozzo.com> Signed-off-by:
Denis V. Lunev <den@openvz.org> CC: Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Sasha Levin authored
[ Upstream commit f7d66562 ] x86_64 needs to use compat_sys_keyctl for 32-bit userspace rather than calling sys_keyctl(). The latter will work in a lot of cases, thereby hiding the issue. Reported-by:
Stephan Mueller <smueller@chronox.de> Tested-by:
David Howells <dhowells@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: keyrings@vger.kernel.org Cc: linux-security-module@vger.kernel.org Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/146961615805.14395.5581949237156769439.stgit@warthog.procyon.org.ukSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Hui Wang authored
[ Upstream commit dd9aa335 ] We have a Dell AIO on which we can't adjust its speaker's volume. The problem is it is connected to a Audio Output node without Amp-out capability. To fix it, we change it to be connnected to a node with Amp-out capability. Cc: <stable@vger.kernel.org> Signed-off-by:
-
Keith Packard authored
[ Upstream commit 98973f2f ] This laptop needs GPIO4 pulled high to enable the headphone amplifier, and has a mute LED on GPIO3. I modelled the patch on the existing GPIO4 code which pulls the line low for the same purpose; this time, the HP amp line is pulled high. v2: Disable the headphone amplifier when no headphone is connected. Don't disable power savings to preserve the LED state. v3: Remove headset-specific hooks and code; this is just a headphone. Signed-off-by:
Keith Packard <keithp@keithp.com> Signed-off-by:
-
Ilia Mirkin authored
[ Upstream commit d0e62ef6 ] This should fix some unaligned access warnings. This is also likely to fix non-descript issues on nv30/nv34 as a result of incorrect channel setup. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96836Signed-off-by:
Ilia Mirkin <imirkin@alum.mit.edu> Cc: stable@vger.kernel.org Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Mikulas Patocka authored
[ Upstream commit 28668f43 ] The patch f045f459 ("drm/nouveau/fbcon: fix out-of-bounds memory accesses") tries to fix some out of memory accesses. Unfortunatelly, the patch breaks the display when using fonts with width that is not divisiable by 8. The monochrome bitmap for each character is stored in memory by lines from top to bottom. Each line is padded to a full byte. For example, for 22x11 font, each line is padded to 16 bits, so each character is consuming 44 bytes total, that is 11 32-bit words. The patch f045f459 changed the logic to "dsize = ALIGN(image->width * image->height, 32) >> 5", that is just 8 words - this is incorrect and it causes display corruption. This patch adds the necesary padding of lines to 8 bytes. This patch should be backported to stable kernels where f045f459 was backported. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Fixes: f045f459 ("drm/nouveau/fbcon: fix out-of-bounds memory accesses") Cc: stable@vger.kernel.org Signed-off-by:
-
Richard Weinberger authored
[ Upstream commit 4946784b ] When the volume resize operation shrinks a volume, LEBs will be unmapped. Since unmapping will not erase these LEBs immediately we have to wait for that operation to finish. Otherwise in case of a power cut right after writing the new volume table the UBI attach process can find more LEBs than the volume table knows. This will render the UBI image unattachable. Fix this issue by waiting for erase to complete and write the new volume table afterward. Cc: <stable@vger.kernel.org> Reported-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Richard Weinberger authored
[ Upstream commit bc743f34 ] We cannot use ubi_* logging functions before the UBI object is initialized. Cc: <stable@vger.kernel.org> Fixes: 32608703 ("UBI: Extend UBI layer debug/messaging capabilities") Signed-off-by:
-
Iosif Harutyunov authored
[ Upstream commit 714fb87e ] Install the UBI device object before we arm sysfs. Otherwise udev tries to read sysfs attributes before UBI is ready and udev rules will not match. Cc: <stable@vger.kernel.org> Signed-off-by:
Iosif Harutyunov <iharutyunov@sonicwall.com> [rw: massaged commit message] Signed-off-by:
-
Wei Fang authored
[ Upstream commit 9446385f ] FUSE_HAS_IOCTL_DIR should be assigned to ->flags, it may be a typo. Signed-off-by:
Wei Fang <fangwei1@huawei.com> Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Fixes: 69fe05c9 ("fuse: add missing INIT flags") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Maxim Patlasov authored
[ Upstream commit 9ebce595 ] fuse_flush() calls write_inode_now() that triggers writeback, but actual writeback will happen later, on fuse_sync_writes(). If an error happens, fuse_writepage_end() will set error bit in mapping->flags. So, we have to check mapping->flags after fuse_sync_writes(). Signed-off-by:
Maxim Patlasov <mpatlasov@virtuozzo.com> Signed-off-by:
-
Alexey Kuznetsov authored
[ Upstream commit ac7f052b ] Due to implementation of fuse writeback filemap_write_and_wait_range() does not catch errors. We have to do this directly after fuse_sync_writes() Signed-off-by:
Alexey Kuznetsov <kuznet@virtuozzo.com> Signed-off-by:
-
Vineet Gupta authored
[ Upstream commit 3925a16a ] LTP madvise05 was generating mm splat | [ARCLinux]# /sd/ltp/testcases/bin/madvise05 | BUG: Bad page map in process madvise05 pte:80e08211 pmd:9f7d4000 | page:9fdcfc90 count:1 mapcount:-1 mapping: (null) index:0x0 flags: 0x404(referenced|reserved) | page dumped because: bad pte | addr:200b8000 vm_flags:00000070 anon_vma: (null) mapping: (null) index:1005c | file: (null) fault: (null) mmap: (null) readpage: (null) | CPU: 2 PID: 6707 Comm: madvise05 And for newer kernels, the system was rendered unusable afterwards. The problem was mprotect->pte_modify() clearing PTE_SPECIAL (which is set to identify the special zero page wired to the pte). When pte was finally unmapped, special casing for zero page was not done, and instead it was treated as a "normal" page, tripping on the map counts etc. This fixes ARC STAR 9001053308 Cc: <stable@vger.kernel.org> Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Alex Deucher authored
[ Upstream commit 3edc38a0 ] Some of the checks didn't handle frev 2 tables properly. Signed-off-by:
-
David Howells authored
[ Upstream commit 20f06ed9 ] MIPS64 needs to use compat_sys_keyctl for 32-bit userspace rather than calling sys_keyctl. The latter will work in a lot of cases, thereby hiding the issue. Reported-by:
-
Paul Mackerras authored
[ Upstream commit 93d17397 ] It turns out that if the guest does a H_CEDE while the CPU is in a transactional state, and the H_CEDE does a nap, and the nap loses the architected state of the CPU (which is is allowed to do), then we lose the checkpointed state of the virtual CPU. In addition, the transactional-memory state recorded in the MSR gets reset back to non-transactional, and when we try to return to the guest, we take a TM bad thing type of program interrupt because we are trying to transition from non-transactional to transactional with a hrfid instruction, which is not permitted. The result of the program interrupt occurring at that point is that the host CPU will hang in an infinite loop with interrupts disabled. Thus this is a denial of service vulnerability in the host which can be triggered by any guest (and depending on the guest kernel, it can potentially triggered by unprivileged userspace in the guest). This vulnerability has been assigned the ID CVE-2016-5412. To fix this, we save the TM state before napping and restore it on exit from the nap, when handling a H_CEDE in real mode. The case where H_CEDE exits to host virtual mode is already OK (as are other hcalls which exit to host virtual mode) because the exit path saves the TM state. Cc: stable@vger.kernel.org # v3.15+ Signed-off-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
-
Paul Mackerras authored
[ Upstream commit f024ee09 ] This moves the transactional memory state save and restore sequences out of the guest entry/exit paths into separate procedures. This is so that these sequences can be used in going into and out of nap in a subsequent patch. The only code changes here are (a) saving and restore LR on the stack, since these new procedures get called with a bl instruction, (b) explicitly saving r1 into the PACA instead of assuming that HSTATE_HOST_R1(r13) is already set, and (c) removing an unnecessary and redundant setting of MSR[TM] that should have been removed by commit 9d4d0bdd9e0a ("KVM: PPC: Book3S HV: Add transactional memory support", 2013-09-24) but wasn't. Cc: stable@vger.kernel.org # v3.15+ Signed-off-by:
-
Pavel Shilovsky authored
[ Upstream commit 7893242e ] During following a symbolic link we received err_buf from SMB2_open(). While the validity of SMB2 error response is checked previously in smb2_check_message() a symbolic link payload is not checked at all. Fix it by adding such checks. Cc: Dan Carpenter <dan.carpenter@oracle.com> CC: Stable <stable@vger.kernel.org> Signed-off-by:
Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Aurelien Aptel authored
[ Upstream commit a6b5058f ] if, when mounting //HOST/share/sub/dir/foo we can query /sub/dir/foo but not any of the path components above: - store the /sub/dir/foo prefix in the cifs super_block info - in the superblock, set root dentry to the subpath dentry (instead of the share root) - set a flag in the superblock to remember it - use prefixpath when building path from a dentry fixes bso#8950 Signed-off-by:
Aurelien Aptel <aaptel@suse.com> CC: Stable <stable@vger.kernel.org> Reviewed-by:
-
Dmitry Torokhov authored
[ Upstream commit 40974618 ] As explained in 1407814240-4275-1-git-send-email-decui@microsoft.com we have a hard load dependency between i8042 and atkbd which prevents keyboard from working on Gen2 Hyper-V VMs. > hyperv_keyboard invokes serio_interrupt(), which needs a valid serio > driver like atkbd.c. atkbd.c depends on libps2.c because it invokes > ps2_command(). libps2.c depends on i8042.c because it invokes > i8042_check_port_owner(). As a result, hyperv_keyboard actually > depends on i8042.c. > > For a Generation 2 Hyper-V VM (meaning no i8042 device emulated), if a > Linux VM (like Arch Linux) happens to configure CONFIG_SERIO_I8042=m > rather than =y, atkbd.ko can't load because i8042.ko can't load(due to > no i8042 device emulated) and finally hyperv_keyboard can't work and > the user can't input: https://bugs.archlinux.org/task/39820 > (Ubuntu/RHEL/SUSE aren't affected since they use CONFIG_SERIO_I8042=y) To break the dependency we move away from using i8042_check_port_owner() and instead allow serio port owner specify a mutex that clients should use to serialize PS/2 command stream. Reported-by:
Mark Laws <mdl@60hz.org> Tested-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Ben Hutchings authored
[ Upstream commit b8612e51 ] Signing a module should only make it trusted by the specific kernel it was built for, not anything else. If a module signing key is used for multiple ABI-incompatible kernels, the modules need to include enough version information to distinguish them. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Cc: stable@vger.kernel.org Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Ben Hutchings authored
[ Upstream commit bca014ca ] Signing a module should only make it trusted by the specific kernel it was built for, not anything else. Loading a signed module meant for a kernel with a different ABI could have interesting effects. Therefore, treat all signatures as invalid when a module is force-loaded. Signed-off-by:
-
Vegard Nossum authored
[ Upstream commit d3e6952c ] I ran into this: kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 2 PID: 2012 Comm: trinity-c3 Not tainted 4.7.0-rc7+ #19 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 task: ffff8800b745f2c0 ti: ffff880111740000 task.ti: ffff880111740000 RIP: 0010:[<ffffffff82bbf066>] [<ffffffff82bbf066>] irttp_connect_request+0x36/0x710 RSP: 0018:ffff880111747bb8 EFLAGS: 00010286 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000069dd8358 RDX: 0000000000000009 RSI: 0000000000000027 RDI: 0000000000000048 RBP: ffff880111747c00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000069dd8358 R11: 1ffffffff0759723 R12: 0000000000000000 R13: ffff88011a7e4780 R14: 0000000000000027 R15: 0000000000000000 FS: 00007fc738404700(0000) GS:ffff88011af00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc737fdfb10 CR3: 0000000118087000 CR4: 00000000000006e0 Stack: 0000000000000200 ffff880111747bd8 ffffffff810ee611 ffff880119f1f220 ffff880119f1f4f8 ffff880119f1f4f0 ffff88011a7e4780 ffff880119f1f232 ffff880119f1f220 ffff880111747d58 ffffffff82bca542 0000000000000000 Call Trace: [<ffffffff82bca542>] irda_connect+0x562/0x1190 [<ffffffff825ae582>] SYSC_connect+0x202/0x2a0 [<ffffffff825b4489>] SyS_connect+0x9/0x10 [<ffffffff8100334c>] do_syscall_64+0x19c/0x410 [<ffffffff83295ca5>] entry_SYSCALL64_slow_path+0x25/0x25 Code: 41 89 ca 48 89 e5 41 57 41 56 41 55 41 54 41 89 d7 53 48 89 fb 48 83 c7 48 48 89 fa 41 89 f6 48 c1 ea 03 48 83 ec 20 4c 8b 65 10 <0f> b6 04 02 84 c0 74 08 84 c0 0f 8e 4c 04 00 00 80 7b 48 00 74 RIP [<ffffffff82bbf066>] irttp_connect_request+0x36/0x710 RSP <ffff880111747bb8> ---[ end trace 4cda2588bc055b30 ]--- The problem is that irda_open_tsap() can fail and leave self->tsap = NULL, and then irttp_connect_request() almost immediately dereferences it. Cc: stable@vger.kernel.org Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
