This reverts commit c5f39d07 ("staging: ccree: fix leak of import()
after init()") and commit aece0902 ("staging: ccree: Uninitialized
return in ssi_ahash_import()").

This is the wrong solution and ends up relying on uninitialized memory,
although it was not obvious to me at the time.

Cc: stable@vger.kernel.org
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Crypto API tfm providers are required to provide a backlog
service, if so indicated, that queues up requests in the case
of the provider being busy and processing them later.

The ccree driver did not provide this facility. Add it now.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The send_request() function was handling both synchronous
and asynchronous invocations, but were not handling
the asynchronous case, which may be called in an atomic
context, properly as it was sleeping.

Start to fix the problem by breaking up the two use
cases to separate functions calling a common internal
service function and return error instead of sleeping
for the asynchronous case.

The next patch will complete the fix by implementing
proper backlog handling.

Fixes: abefd674 ("staging: ccree: introduce CryptoCell HW driver").
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the unused monitor_desc field.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The debugfs global init and exit functions were missing
__init and __exit tags, potentially wasting memory.
Fix it by properly tagging them.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The ccree driver was using a DMA operation to copy larval digest
from the ccree SRAM to RAM. Replace it with a simple memcpy.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The ccree driver was allocating memory using GFP_KERNEL flag
always, ignoring the flags set in the crypto request. Fix it
by choosing gfp flags based on crypto request flags.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove bogus GFP_DMA flag from memory allocations. ccree driver
does not operate over an ISA or similar limited bus.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fold the 2 macro defined in dx_reg_common.h into the file they
are used in and delete the file.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fold the two remaining enum in hash defs into the queue defs
that are using them and delete the hash defs include file.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace verbatim GPL v2 copy with SPDX tag.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The global array clashes with an existing symbol of the same name:

drivers/staging/ccree/cc_debugfs.o:(.data+0x0): multiple definition of `debug_regs'
drivers/mmc/host/s3cmci.o:(.data+0x70): first defined here

We should fix both, this one addresses the ccree driver by removing
the symbol from the global namespace.

Fixes: 9bdd203b ("s3cmci: add debugfs support for examining driver and hardware state")
Fixes: b3ec9a67 ("staging: ccree: staging: ccree: replace sysfs by debugfs interface")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Sparse emitted the following warning:
../drivers/staging/vboxvideo/vbox_fb.c:173:27: warning: incorrect type in assignment (different address spaces)
../drivers/staging/vboxvideo/vbox_fb.c:173:27:    expected char [noderef] <asn:2>*screen_base
../drivers/staging/vboxvideo/vbox_fb.c:173:27:    got void *virtual

The vbox_bo buffer object kernel mapping is handled by a call
to ttm_bo_kmap() prior to the assignment of bo->kmap.virtual to
info->screen_base of type char __iomem*.
Casting bo->kmap.virtual to char __iomem* in this assignment fixes
the warning.

vboxvideo: Fix address space of expression removal sparse warning

Sparse emitted the following warning:
../drivers/staging/vboxvideo/vbox_main.c:64:25: warning: cast removes address space of expression

vbox->vbva_buffers iomapping is handled by calling vbox_accel_init()
from vbox_hw_init().
__force attribute is used in assignment to vbva to fix the warning.
Signed-off-by: Alexander Kapshuk <alexander.kapshuk@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The Linux kernel coding style states that braces should only be used
when necessary.

This fixes the checkpatch warning

WARNING: line over 80 characters
+	} else if (display->regwidth == 8 && display->buswidth == 9 && par->spi) {

introduced by patch #1.
Signed-off-by: Luis Gerhorst <linux-kernel@luisgerhorst.de>
Acked-by: Jonny Schaefer <schaefer.jonny@gmail.com>
Acked-by: Alexander Wuerstlein <arw@cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This removes the following warning issued by checkpatch

WARNING: suspect code indent for conditional statements (8, 8)
+	} else
+	if (display->regwidth == 8 && display->buswidth == 9 && par->spi) {
Signed-off-by: Luis Gerhorst <linux-kernel@luisgerhorst.de>
Acked-by: Jonny Schaefer <schaefer.jonny@gmail.com>
Acked-by: Alexander Wuerstlein <arw@cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use kcalloc for allocating an array instead of kzalloc with
multiply. kcalloc is the preferred API. Issue reported by
checkpatch.pl
Signed-off-by: Sumit Pundir <pundirsumit11@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use seq_puts() for strings without format specifiers instead of
seq_printf(). Issue reported by checkpatch.pl
Signed-off-by: Sumit Pundir <pundirsumit11@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lu_global_fini() explicitly uses knowledge about shrinker's
internals to make decision about calling of unregister_shrinker().
Now this check was integrated into unregister_shrinker(),
so it is safe to call it against unregistered shrinker.
Signed-off-by: Aliaksei Karaliou <akaraliou.dev@gmail.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These trivial wrappers hurt readability and
as they use kvmalloc, they are overly generic.

So discard them and use kmalloc/kfree as is
normal in Linux.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These functions just call LIBCFS_ALLOC() which in-turn
calls kvmalloc().
In none of these cases is the 'vmalloc' option needed.

LIBCFS_ALLOC also produces a warning if NULL is returned,
but that can be provided with CONFIG_SLAB_DEBUG.

LIBCFS_ALLOC zeros the memory, so we need to use
__GFP_ZERO too.

So with one exception where the alloc function is not trivial,
open-code the alloc and free functions using kmalloc and kfree.

Note that the 'size' used in lnet_md_alloc() is limited and less than
a page because LNET_MAX_IOV is 256, so kvmalloc is not needed.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The cfs prng is no longer used, so discard it.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The cfs_get_random_bytes() interface adds nothing of value
to get_random_byte() (which it uses internally).  So just use the
standard interface.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The only places that cfs_srand is called, the random bits are
mixed with bits from get_random_bytes().  So it is equally effective
to add entropy to either pool.
So we can replace calls to cfs_srand() with calls that add the
entropy with add_device_randomness().  That function adds time-based
entropy, so we can discard the ktime_get_ts64 calls.

One location in lustre_handles.c only adds timebased
entropy.  This cannot improve the entropy provided by get_random_bytes(),
so just discard that call.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

All occurrences of
   cfs_rand() % X
are replaced with
   prandom_u32_max(X)

cfs_rand() is a simple Linear Congruential PRNG.  prandom_u32_max()
is at least as random, is seeded with more randomness, and uses
cpu-local state to avoid cross-cpu issues.

This is the first step is discarding the libcfs prng with
the standard linux prng.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In every case, the value passed via wi_data can be determined
from the cfs_workitem pointer using container_of().

So use container_of(), and discard wi_data.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lustre has a work-item queuing scheme that provides the
same functionality as linux work_queues.
To make the code easier for linux devs to follow, change
to use work_queues.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lustre_fill_super() calls client_fill_super() without holding a
reference to the module containing client_fill_super.  If that
module is unloaded at a bad time, this can crash.

To be able to get a reference to the module using
try_get_module(), we need a pointer to the module.

So replace
  lustre_register_client_fill_super() and
  lustre_register_kill_super_cb()
with a single
  lustre_register_super_ops()
which also passed a module pointer.

Then use a spinlock to ensure the module pointer isn't removed
while try_module_get() is running, and use try_module_get() to
ensure we have a reference before calling client_fill_super().
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This arg is always NULL and is never used.
So discard it from this and related functions.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is used to pass a void* and NULL to lustre_fill_super().
It is easier just to pass the void*.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Lustre mounts do not need a dev, as we can see from lustre_mount()
calling mount_nodev().  So remove the flag which could cause
confusion elsewhere.

Also format lustre_fs_types so that fields line up.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Calling smp_processor_id() without disabling preemption
triggers a warning (if CONFIG_DEBUG_PREEMPT).
I think the result of cfs_cpt_current() is only used as a hint for
load balancing, rather than as a precise and stable indicator of
the current CPU.  So it doesn't need to be called with
preemption disabled.

So disable preemption inside cfs_cpt_current() to silence the warning.
Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux lib provides identical functionality to cfs_trimwhite,
so discard that code and use the standard.
Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

in_concentration_raw should report, according to sysfs-bus-iio documentation,
a "Raw (unscaled no offset etc.) percentage reading of a substance."

Modify scale to convert from ppm/ppb to percentage:
1 ppm = 0.0001%
1 ppb = 0.0000001%

There is no offset needed to convert the ppm/ppb to percentage,
so remove offset from IIO_CONCENTRATION (IIO_MOD_CO2) channel.

Cc'd stable to reduce chance of userspace breakage in the long
run as we fix this wrong bit of ABI usage.
Signed-off-by: Narcisa Ana Maria Vasile <narcisaanamaria12@gmail.com>
Cc: <Stable@vger.kernel.org>
Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use DEFINE_DEBUGFS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTRIBUTE
for debugfs files.

Semantic patch information:
Rationale: DEFINE_SIMPLE_ATTRIBUTE + debugfs_create_file()
imposes some significant overhead as compared to
DEFINE_DEBUGFS_ATTRIBUTE + debugfs_create_file_unsafe().

Generated by: scripts/coccinelle/api/debugfs/debugfs_simple_attr.cocci
Signed-off-by: Venkat Prashanth B U <venkat.prashanth2498@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use DEFINE_DEBUGFS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTRIBUTE
for debugfs files.

Semantic patch information:
Rationale: DEFINE_SIMPLE_ATTRIBUTE + debugfs_create_file()
imposes some significant overhead as compared to
DEFINE_DEBUGFS_ATTRIBUTE + debugfs_create_file_unsafe().

Generated by: scripts/coccinelle/api/debugfs/debugfs_simple_attr.cocci
Signed-off-by: Venkat Prashanth B U <venkat.prashanth2498@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This fixes three instances of checkpatch warning:
WARNING: line over 80 characters
Signed-off-by: George Edward Bulmer <gebulmer@googlemail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove st_lsm6dsx_write_with_mask() declaration since it has been removed
in commit 6674bef628e6 ("iio: imu: st_lsm6dsx: add regmap API support")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Allocate device read buffer at bootstrap and do not put it on the stack
since it is pretty big (~200B) and its size will increase adding support
to device hw timestamp.
Moreover this patch fixes following sparse warnings:
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c:250:17: warning: Variable length
array is used.
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c:283:55: error: cannot size
expression

Fixes: 290a6ce1 ("iio: imu: add support to lsm6dsx driver")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Kernel-doc for @use_count does not currently have a field identifier.
All the rest of the fields do. @use_count is used internally and should
not be accessed directly by the driver so it should be marked as so.

Add [INTERN] identifier to @use_count field.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When building kernel documentation sphinx emits the following warning

	warning: No description found for parameter 'owner'

Add description for struct member 'owner'.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>