- 27 Oct, 2021 3 commits
-
-
Hannes Reinecke authored
Register the discovery subsystem as the 'current' discovery subsystem, and add a new discovery log page entry for it. Signed-off-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
Christoph Hellwig <hch@lst.de>
-
Hannes Reinecke authored
Invert the check for discovery subsystem type to allow for additional discovery subsystem types. Signed-off-by:
-
Hannes Reinecke authored
TP8014 adds a new SUBTYPE value and a new field EFLAGS for the discovery log page entry. Signed-off-by:
-
- 25 Oct, 2021 1 commit
-
-
Michael Schmitz authored
As it turns out, my earlier patch in commit 86d46fda (block: ataflop: fix breakage introduced at blk-mq refactoring) was incomplete. This patch fixes any remaining issues found during more testing and code review. Requests exceeding 4 k are handled in 4k segments but __blk_mq_end_request() is never called on these (still sectors outstanding on the request). With redo_fd_request() removed, there is no provision to kick off processing of the next segment, causing requests exceeding 4k to hang. (By setting /sys/block/fd0/queue/max_sectors_k <= 4 as workaround, this behaviour can be avoided). Instead of reintroducing redo_fd_request(), requeue the remainder of the request by calling blk_mq_requeue_request() on incomplete requests (i.e. when blk_update_request() still returns true), and rely on the block layer to queue the residual as new request. Both error handling and formatting needs to release the ST-DMA lock, so call finish_fdc() on these (this was previously handled by redo_fd_request()). finish_fdc() may be called legitimately without the ST-DMA lock held - make sure we only release the lock if we actually held it. In a similar way, early exit due to errors in ataflop_queue_rq() must release the lock. After minor errors, fd_error sets up to recalibrate the drive but never re-runs the current operation (another task handled by redo_fd_request() before). Call do_fd_action() to get the next steps (seek, retry read/write) underway. Signed-off-by:
Michael Schmitz <schmitzmic@gmail.com> Fixes: 6ec3938c (ataflop: convert to blk-mq) CC: linux-block@vger.kernel.org Link: https://lore.kernel.org/r/20211024002013.9332-1-schmitzmic@gmail.comSigned-off-by:
Jens Axboe <axboe@kernel.dk>
-
- 22 Oct, 2021 1 commit
-
-
Christoph Hellwig authored
Support for cyrptoloop has been officially marked broken and deprecated in favor of dm-crypt (which supports the same broken algorithms if needed) in Linux 2.6.4 (released in March 2004), and support for it has been entirely removed from losetup in util-linux 2.23 (released in April 2013). The XOR transfer has never been more than a toy to demonstrate the transfer in the bad old times of crypto export restrictions. Remove them as they have some nasty interactions with loop device life times due to the iteration over all loop devices in loop_unregister_transfer. Suggested-by:
Milan Broz <gmazyland@gmail.com> Signed-off-by:
-
- 21 Oct, 2021 9 commits
-
-
Luis Chamberlain authored
We never checked for errors on add_disk() as this function returned void. Now that this is fixed, use the shiny new error handling. Acked-by:
Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by:
Luis Chamberlain <mcgrof@kernel.org> Link: https://lore.kernel.org/r/20211015233028.2167651-10-mcgrof@kernel.orgSigned-off-by:
-
Luis Chamberlain authored
We never checked for errors on add_disk() as this function returned void. Now that this is fixed, use the shiny new error handling. Acked-by:
Jack Wang <jinpu.wang@ionos.com> Signed-off-by:
-
Luis Chamberlain authored
We never checked for errors on add_disk() as this function returned void. Now that this is fixed, use the shiny new error handling. ubd_disk_register() never returned an error, so just fix that now and let the caller handle the error condition. Reviewed-by:
Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by:
-
Luis Chamberlain authored
We never checked for errors on add_disk() as this function returned void. Now that this is fixed, use the shiny new error handling. Reviewed-by:
Geert Uytterhoeven <geert@linux-m68k.org> Acked-by:
-
Luis Chamberlain authored
We never checked for errors on device_add_disk() as this function returned void. Now that this is fixed, use the shiny new error handling. The function xlvbd_alloc_gendisk() typically does the unwinding on error on allocating the disk and creating the tag, but since all that error handling was stuffed inside xlvbd_alloc_gendisk() we must repeat the tag free'ing as well. We set the info->rq to NULL to ensure blkif_free() doesn't crash on blk_mq_stop_hw_queues() on device_add_disk() error as the queue will be long gone by then. Reviewed-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
-
Luis Chamberlain authored
We never checked for errors on add_disk() as this function returned void. Now that this is fixed, use the shiny new error handling. This driver doesn't do any unwinding with blk_cleanup_disk() even on errors after add_disk() and so we follow that tradition. Acked-by:
Coly Li <colyli@suse.de> Signed-off-by:
-
Luis Chamberlain authored
We never checked for errors on add_disk() as this function returned void. Now that this is fixed, use the shiny new error handling. There are two calls to dm_setup_md_queue() which can fail then, one on dm_early_create() and we can easily see that the error path there calls dm_destroy in the error path. The other use case is on the ioctl table_load case. If that fails userspace needs to call the DM_DEV_REMOVE_CMD to cleanup the state - similar to any other failure. Reviewed-by:
-
Ye Guojin authored
coccicheck complains about the use of snprintf() in sysfs show functions: WARNING use scnprintf or sprintf Use sysfs_emit instead of scnprintf or sprintf makes more sense. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Ye Guojin <ye.guojin@zte.com.cn> Link: https://lore.kernel.org/r/20211021064931.1047687-1-ye.guojin@zte.com.cnSigned-off-by:
-
git://git.infradead.org/nvmeJens Axboe authored
Pull NVMe updates from Christoph: "nvme updates for Linux 5.16 - fix a multipath partition scanning deadlock (Hannes Reinecke) - generate uevent once a multipath namespace is operational again (Hannes Reinecke) - support unique discovery controller NQNs (Hannes Reinecke) - fix use-after-free when a port is removed (Israel Rukshin) - clear shadow doorbell memory on resets (Keith Busch) - use struct_size (Len Baker) - add error handling support for add_disk (Luis Chamberlain) - limit the maximal queue size for RDMA controllers (Max Gurtovoy) - use a few more symbolic names (Max Gurtovoy) - fix error code in nvme_rdma_setup_ctrl (Max Gurtovoy) - add support for ->map_queues on FC (Saurav Kashyap)" * tag 'nvme-5.16-2021-10-21' of git://git.infradead.org/nvme: (23 commits) nvmet: use struct_size over open coded arithmetic nvme: drop scan_lock and always kick requeue list when removing namespaces nvme-pci: clear shadow doorbell memory on resets nvme-rdma: fix error code in nvme_rdma_setup_ctrl nvme-multipath: add error handling support for add_disk() nvmet: use macro definitions for setting cmic value nvmet: use macro definition for setting nmic value nvme: display correct subsystem NQN nvme: Add connect option 'discovery' nvme: expose subsystem type in sysfs attribute 'subsystype' nvmet: set 'CNTRLTYPE' in the identify controller data nvmet: add nvmet_is_disc_subsys() helper nvme: add CNTRLTYPE definitions for 'identify controller' nvmet: make discovery NQN configurable nvmet-rdma: implement get_max_queue_size controller op nvmet: add get_max_queue_size op for controllers nvme-rdma: limit the maximal queue size for RDMA controllers nvmet-tcp: fix use-after-free when a port is removed nvmet-rdma: fix use-after-free when a port is removed nvmet: fix use-after-free when a port is removed ...
-
- 20 Oct, 2021 26 commits
-
-
Len Baker authored
As noted in the "Deprecated Interfaces, Language Features, Attributes, and Conventions" documentation [1], size calculations (especially multiplication) should not be performed in memory allocator (or similar) function arguments due to the risk of them overflowing. This could lead to values wrapping around and a smaller allocation being made than the caller was expecting. Using those allocations could lead to linear overflows of heap memory and other misbehaviors. In this case this is not actually dynamic size: all the operands involved in the calculation are constant values. However it is better to refactor this anyway, just to keep the open-coded math idiom out of code. So, use the struct_size() helper to do the arithmetic instead of the argument "size + count * size" in the kmalloc() function. This code was detected with the help of Coccinelle and audited and fixed manually. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-argumentsSigned-off-by:
Len Baker <len.baker@gmx.com> Signed-off-by:
-
Hannes Reinecke authored
When reading the partition table on initial scan hits an I/O error the I/O will hang with the scan_mutex held: [<0>] do_read_cache_page+0x49b/0x790 [<0>] read_part_sector+0x39/0xe0 [<0>] read_lba+0xf9/0x1d0 [<0>] efi_partition+0xf1/0x7f0 [<0>] bdev_disk_changed+0x1ee/0x550 [<0>] blkdev_get_whole+0x81/0x90 [<0>] blkdev_get_by_dev+0x128/0x2e0 [<0>] device_add_disk+0x377/0x3c0 [<0>] nvme_mpath_set_live+0x130/0x1b0 [nvme_core] [<0>] nvme_mpath_add_disk+0x150/0x160 [nvme_core] [<0>] nvme_alloc_ns+0x417/0x950 [nvme_core] [<0>] nvme_validate_or_alloc_ns+0xe9/0x1e0 [nvme_core] [<0>] nvme_scan_work+0x168/0x310 [nvme_core] [<0>] process_one_work+0x231/0x420 and trying to delete the controller will deadlock as it tries to grab the scan mutex: [<0>] nvme_mpath_clear_ctrl_paths+0x25/0x80 [nvme_core] [<0>] nvme_remove_namespaces+0x31/0xf0 [nvme_core] [<0>] nvme_do_delete_ctrl+0x4b/0x80 [nvme_core] As we're now properly ordering the namespace list there is no need to hold the scan_mutex in nvme_mpath_clear_ctrl_paths() anymore. And we always need to kick the requeue list as the path will be marked as unusable and I/O will be requeued _without_ a current path. Signed-off-by:
Keith Busch <kbusch@kernel.org> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
-
Keith Busch authored
The host memory doorbell and event buffers need to be initialized on each reset so the driver doesn't observe stale values from the previous instantiation. Signed-off-by:
John Levon <john.levon@nutanix.com> Signed-off-by:
-
Max Gurtovoy authored
In case that icdoff is not zero or mandatory keyed sgls are not supported by the NVMe/RDMA target, we'll go to error flow but we'll return 0 to the caller. Fix it by returning an appropriate error code. Fixes: c66e2998 ("nvme-rdma: centralize controller setup sequence") Signed-off-by:
Max Gurtovoy <mgurtovoy@nvidia.com> Reviewed-by:
-
Luis Chamberlain authored
We never checked for errors on add_disk() as this function returned void. Now that this is fixed, use the shiny new error handling. Since we now can tell for sure when a disk was added, move setting the bit NVME_NSHEAD_DISK_LIVE only when we did add the disk successfully. Nothing to do here as the cleanup is done elsewhere. We take care and use test_and_set_bit() because it is protects against two nvme paths simultaneously calling device_add_disk() on the same namespace head. Signed-off-by:
-
Max Gurtovoy authored
This makes the code more readable. Signed-off-by:
Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by:
-
Max Gurtovoy authored
This makes the code more readable. Signed-off-by:
-
Hannes Reinecke authored
With discovery controllers supporting unique subsystem NQNs the actual subsystem NQN might be different from that one passed in via the connect args. So add a helper to display the resulting subsystem NQN. Signed-off-by:
-
Hannes Reinecke authored
Add a connect option 'discovery' to specify that the connection should be made to a discovery controller, not a normal I/O controller. With discovery controllers supporting unique subsystem NQNs we cannot easily distinguish by the subsystem NQN if this should be a discovery connection, but we need this information to blank out options not supported by discovery controllers. Signed-off-by:
-
Hannes Reinecke authored
With unique discovery controller NQNs we cannot distinguish the subsystem type by the NQN alone, but need to check the subsystem type, too. So expose the subsystem type in a new sysfs attribute 'subsystype'. Signed-off-by:
-
Hannes Reinecke authored
Set the correct 'CNTRLTYPE' field in the identify controller data. Signed-off-by:
-
Hannes Reinecke authored
Add a helper function to determine if a given subsystem is a discovery subsystem. Signed-off-by:
Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by:
-
Hannes Reinecke authored
Update the 'identify controller' structure to define the newly added CNTRLTYPE field. Signed-off-by:
-
Hannes Reinecke authored
TPAR8013 allows for unique discovery NQNs, so make the discovery controller NQN configurable by exposing a subsys attribute 'discovery_nqn'. Signed-off-by:
-
Max Gurtovoy authored
Limit the maximal queue size for RDMA controllers. Today, the target reports a limit of 1024 and this limit isn't valid for some of the RDMA based controllers. For now, limit RDMA transport to 128 entries (the max queue depth configured for Linux NVMe/RDMA host). Future general solution should use RDMA/core API to calculate this size according to device capabilities and number of WRs needed per NVMe IO request. Reported-by:
Mark Ruijter <mruijter@primelogic.nl> Reviewed-by:
-
Max Gurtovoy authored
Some transports, such as RDMA, would like to set the queue size according to device/port/ctrl characteristics. Add a new nvmet transport op that is called during ctrl initialization. This will not effect transports that don't implement this option. Reviewed-by:
-
Max Gurtovoy authored
Corrent limit of 1024 isn't valid for some of the RDMA based ctrls. In case the target expose a cap of larger amount of entries (e.g. 1024), the initiator may fail to create a QP with this size. Thus limit to a value that works for all RDMA adapters. Future general solution should use RDMA/core API to calculate this size according to device capabilities and number of WRs needed per NVMe IO request. Signed-off-by:
-
Israel Rukshin authored
When removing a port, all its controllers are being removed, but there are queues on the port that doesn't belong to any controller (during connection time). This causes a use-after-free bug for any command that dereferences req->port (like in nvmet_alloc_ctrl). Those queues should be destroyed before freeing the port via configfs. Destroy the remaining queues after the accept_work was cancelled guarantees that no new queue will be created. Signed-off-by:
Israel Rukshin <israelr@nvidia.com> Reviewed-by:
-
Israel Rukshin authored
When removing a port, all its controllers are being removed, but there are queues on the port that doesn't belong to any controller (during connection time). This causes a use-after-free bug for any command that dereferences req->port (like in nvmet_alloc_ctrl). Those queues should be destroyed before freeing the port via configfs. Destroy the remaining queues after the RDMA-CM was destroyed guarantees that no new queue will be created. Signed-off-by:
-
Israel Rukshin authored
When a port is removed through configfs, any connected controllers are starting teardown flow asynchronously and can still send commands. This causes a use-after-free bug for any command that dereferences req->port (like in nvmet_parse_io_cmd). To fix this, wait for all the teardown scheduled works to complete (like release_work at rdma/tcp drivers). This ensures there are no active controllers when the port is eventually removed. Signed-off-by:
-
Saurav Kashyap authored
Implement ->map queues and use the block layer blk_mq_pci_map_queues helper for mapping queues to CPUs. With this mapping minimum 10%+ increase in performance is noticed. Signed-off-by:
Saurav Kashyap <skashyap@marvell.com> Signed-off-by:
Nilesh Javali <njavali@marvell.com> Signed-off-by:
-
Saurav Kashyap authored
NVMe FC don't have support for map queues, unlike the PCI, RDMA and TCP transports. Add a ->map_queues callout for the LLDDs to provide such functionality. Signed-off-by:
-
Hannes Reinecke authored
When fast_io_fail_tmo is set I/O will be aborted while recovery is still ongoing. This causes MD to set the namespace to failed, and no futher I/O will be submitted to that namespace. However, once the recovery succeeds and the namespace becomes operational again the NVMe subsystem doesn't send a notification, so MD cannot automatically reinstate operation and requires manual interaction. This patch will send a KOBJ_CHANGE uevent per multipathed namespace once the underlying controller transitions to LIVE, allowing an automatic MD reassembly with these udev rules: /etc/udev/rules.d/65-md-auto-re-add.rules: SUBSYSTEM!="block", GOTO="md_end" ACTION!="change", GOTO="md_end" ENV{ID_FS_TYPE}!="linux_raid_member", GOTO="md_end" PROGRAM="/sbin/md_raid_auto_readd.sh $devnode" LABEL="md_end" /sbin/md_raid_auto_readd.sh: MDADM=/sbin/mdadm DEVNAME=$1 export $(${MDADM} --examine --export ${DEVNAME}) if [ -z "${MD_UUID}" ]; then exit 1 fi UUID_LINK=$(readlink /dev/disk/by-id/md-uuid-${MD_UUID}) MD_DEVNAME=${UUID_LINK##*/} export $(${MDADM} --detail --export /dev/${MD_DEVNAME}) if [ -z "${MD_METADATA}" ] ; then exit 1 fi if [ $(cat /sys/block/${MD_DEVNAME}/md/degraded) != 1 ]; then echo "${MD_DEVNAME}: array not degraded, nothing to do" exit 0 fi MD_STATE=$(cat /sys/block/${MD_DEVNAME}/md/array_state) if [ ${MD_STATE} != "clean" ] ; then echo "${MD_DEVNAME}: array state ${MD_STATE}, cannot re-add" exit 1 fi MD_VARNAME="MD_DEVICE_dev_${DEVNAME##*/}_ROLE" if [ ${!MD_VARNAME} = "spare" ] ; then ${MDADM} --manage /dev/${MD_DEVNAME} --re-add ${DEVNAME} fi Changes to v2: - Add udev rules example to description Changes to v1: - use disk_uevent() as suggested by hch Signed-off-by: -
Christoph Hellwig authored
bch_crc64_update is an entirely pointless wrapper around crc64_be. Signed-off-by:
-
Christoph Hellwig authored
Using local kmaps slightly reduces the chances to stray writes, and the bvec interface cleans up the code a little bit. Also switch from page_address to bvec_kmap_local for cbv to be on the safe side and to avoid pointlessly poking into bvec internals. Signed-off-by:
-
Christoph Hellwig authored
Just use the %pg format specifier to print the name directly. Signed-off-by:
-
