- 17 Sep, 2014 15 commits
-
-
Wang Shilong authored
Marc argued that if there are several btrfs filesystems mounted, while users even don't know which filesystem hit the corrupted errors something like generation verification failure. Since @extent_buffer structure has a member @fs_info, let's output btrfs device info. Reported-by: Marc MERLIN <marc@merlins.org> Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
-
Miao Xie authored
If we mounted a seed filesystem with degraded option, and then added a new device into the seed filesystem, then we found adding device failed because of the IO failure. Steps to reproduce: # mkfs.btrfs -d raid1 -m raid1 <dev0> <dev1> # btrfstune -S 1 <dev0> # mount <dev0> -o degraded <mnt> # btrfs device add -f <dev2> <mnt> It is because the original didn't set the chunk on the seed device to be read-only if the degraded flag was set. It was introduced by patch f48b9075, which fixed the problem the raid1 filesystem became read-only after one device of it was missing. But this fix method was not right, we should set the read-only flag according to the number of the missing devices, not the degraded mount option, if the number of the missing devices is less than the max error number that the profile of the chunk tolerates, we don't set it to be read-only. Cc: Josef Bacik <jbacik@fb.com> Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Chris Mason <clm@fb.com>
-
Wang Shilong authored
Btrfs defragment will utilize COW feature, which means this did not work for nodatacow option, this problem was detected by xfstests generic/018 with nodatacow mount option. Fix this problem by forcing cow for a extent with state @EXTETN_DEFRAG setting. Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com> Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
-
Satoru Takeuchi authored
Rediffed remaining parts of original patch from Anand Jain. This makes sure to avoid trailing newlines in the btrfs label output reproducer.sh: =============================================================================== TEST_DEV=/dev/vdb TEST_DIR=/home/sat/mnt umount /home/sat/mnt mkfs.btrfs -f $TEST_DEV UUID=$(btrfs fi show $TEST_DEV | head -1 | sed -e 's/.*uuid: \([-0-9a-z]*\)$/\1/') mount $TEST_DEV $TEST_DIR LABELFILE=/sys/fs/btrfs/$UUID/label echo "Test for empty label..." >&2 LINES="$(cat $LABELFILE | wc -l | awk '{print $1}')" RET=0 if [ $LINES -eq 0 ] ; then echo '[PASS] Trailing \n is removed correctly.' >&2 else echo '[FAIL] Trailing \n still exists.' >&2 RET=1 fi echo "Test for non-empty label..." >&2 echo testlabel >$LABELFILE LINES="$(cat $LABELFILE | wc -l | awk '{print $1}')" if [ $LINES -eq 1 ] ; then echo '[PASS] Trailing \n is removed correctly.' >&2 else echo '[FAIL] Trailing \n still exists.' >&2 RET=1 fi exit $RET =============================================================================== Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
-
Anand Jain authored
as in the disk add patch, disk detached from the volume must be recorded in the syslog as well for the same reason. Signed-off-by: Anand Jain <Anand.Jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.cz> Signed-off-by: Chris Mason <clm@fb.com>
-
Anand Jain authored
when we add a new disk to the mounted btrfs we don't record it as of now, disk add is a critical change of btrfs configuration, it must be recorded in the syslog to help offline investigations of customer problems when reported. Signed-off-by: Anand Jain <Anand.Jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.cz> Signed-off-by: Chris Mason <clm@fb.com>
-
Wang Shilong authored
Steps to reproduce: # mkfs.btrfs -f /dev/sdb # mount /dev/sdb /mnt -o compress-force=lzo # mount /dev/sdb /mnt -o remount,compress=zlib # cat /proc/mounts Remounting from compress-force to compress could not clear compress-force option. The problem is there is no way for users to clear compress-force option separately. Fix this problem by clearing @FORCE_COMPRESS flag when remounting to compress=xxx. Suggested-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com> Reviewed-by: David Sterba <dsterba@suse.cz> Reviewed-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Tested-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
-
David Sterba authored
The form (value + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT is equivalent to (value + PAGE_CACHE_SIZE - 1) / PAGE_CACHE_SIZE The rest is a simple subsitution, no difference in the generated assembly code. Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Chris Mason <clm@fb.com>
-
David Sterba authored
Only wraps the ALIGN macro. Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Chris Mason <clm@fb.com>
-
David Sterba authored
The nodesize and leafsize were never of different values. Unify the usage and make nodesize the one. Cleanup the redundant checks and helpers. Shaves a few bytes from .text: text data bss dec hex filename 852418 24560 23112 900090 dbbfa btrfs.ko.before 851074 24584 23112 898770 db6d2 btrfs.ko.after Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Chris Mason <clm@fb.com>
-
David Sterba authored
btrfs_set_key_type and btrfs_key_type are used inconsistently along with open coded variants. Other members of btrfs_key are accessed directly without any helpers anyway. Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Chris Mason <clm@fb.com>
-
David Sterba authored
There's no user of the return value and we can get rid of the comment in put_super. Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Chris Mason <clm@fb.com>
-
David Sterba authored
The naming is confusing, generic yet used for a specific cache. Add a prefix 'ino_' or rename appropriately. Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Chris Mason <clm@fb.com>
-
David Sterba authored
Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Chris Mason <clm@fb.com>
-
David Sterba authored
The comment applied when there was a BUG_ON. Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Chris Mason <clm@fb.com>
-
- 15 Sep, 2014 3 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs fixes from Al Viro: "double iput() on failure exit in lustre, racy removal of spliced dentries from ->s_anon in __d_materialise_dentry() plus a bunch of assorted RCU pathwalk fixes" The RCU pathwalk fixes end up fixing a couple of cases where we incorrectly dropped out of RCU walking, due to incorrect initialization and testing of the sequence locks in some corner cases. Since dropping out of RCU walk mode forces the slow locked accesses, those corner cases slowed down quite dramatically. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: be careful with nd->inode in path_init() and follow_dotdot_rcu() don't bugger nd->seq on set_root_rcu() from follow_dotdot_rcu() fix bogus read_seqretry() checks introduced in b37199e6 move the call of __d_drop(anon) into __d_materialise_unique(dentry, anon) [fix] lustre: d_make_root() does iput() on dentry allocation failure
-
Linus Torvalds authored
The performance regression that Josef Bacik reported in the pathname lookup (see commit 99d263d4 "vfs: fix bad hashing of dentries") made me look at performance stability of the dcache code, just to verify that the problem was actually fixed. That turned up a few other problems in this area. There are a few cases where we exit RCU lookup mode and go to the slow serializing case when we shouldn't, Al has fixed those and they'll come in with the next VFS pull. But my performance verification also shows that link_path_walk() turns out to have a very unfortunate 32-bit store of the length and hash of the name we look up, followed by a 64-bit read of the combined hash_len field. That screws up the processor store to load forwarding, causing an unnecessary hickup in this critical routine. It's caused by the ugly calling convention for the "hash_name()" function, and easily fixed by just making hash_name() fill in the whole 'struct qstr' rather than passing it a pointer to just the hash value. With that, the profile for this function looks much smoother. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 14 Sep, 2014 12 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc updates from Helge Deller: "The most important patch is a new Light Weigth Syscall (LWS) for 8, 16, 32 and 64 bit atomic CAS operations which is required in order to be able to implement the atomic gcc builtins on our platform. Other than that, we wire up the seccomp, getrandom and memfd_create syscalls, fixes a minor off-by-one bug and a wrong printk string" * 'parisc-3.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Implement new LWS CAS supporting 64 bit operations. parisc: Wire up seccomp, getrandom and memfd_create syscalls parisc: dino: fix %d confusingly prefixed with 0x in format string parisc: sys_hpux: NUL terminator is one past the end
-
Al Viro authored
in the former we simply check if dentry is still valid after picking its ->d_inode; in the latter we fetch ->d_inode in the same places where we fetch dentry and its ->d_seq, under the same checks. Cc: stable@vger.kernel.org # 2.6.38+ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
return the value instead, and have path_init() do the assignment. Broken by "vfs: Fix absolute RCU path walk failures due to uninitialized seq number", which was Cc-stable with 2.6.38+ as destination. This one should go where it went. To avoid dummy value returned in case when root is already set (it would do no harm, actually, since the only caller that doesn't ignore the return value is guaranteed to have nd->root *not* set, but it's more obvious that way), lift the check into callers. And do the same to set_root(), to keep them in sync. Cc: stable@vger.kernel.org # 2.6.38+ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
git://github.com/jonmason/ntbLinus Torvalds authored
Pull ntb driver bugfixes from Jon Mason: "NTB driver fixes for queue spread and buffer alignment. Also, update to MAINTAINERS to reflect new e-mail address" * tag 'ntb-3.17' of git://github.com/jonmason/ntb: ntb: Add alignment check to meet hardware requirement MAINTAINERS: update NTB info NTB: correct the spread of queues over mw's
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull ARM irq chip fixes from Thomas Gleixner: "Another pile of ARM specific irq chip fixlets: - off by one bugs in the crossbar driver - missing annotations - a bunch of "make it compile" updates I pulled the lot today from Jason, but it has been in -next for at least a week" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip: gic-v3: Declare rdist as __percpu pointer to __iomem pointer irqchip: gic: Make gic_default_routable_irq_domain_ops static irqchip: exynos-combiner: Fix compilation error on ARM64 irqchip: crossbar: Off by one bugs in init irqchip: gic-v3: Tag all low level accessors __maybe_unused irqchip: gic-v3: Only define gic_peek_irq() when building SMP
-
git://git.infradead.org/users/jcooper/linuxThomas Gleixner authored
irqchip fixes for v3.17 from Jason Cooper - GIC/GICV3: Various fixlets - crossbar: Fix off-by-one bug - exynos-combiner: Fix arm64 build error
-
Dave Jiang authored
The NTB translate register must have the value to be BAR size aligned. This alignment check make sure that the DMA memory allocated has the proper alignment. Another requirement for NTB to function properly with memory window BAR size greater or equal to 4M is to use the CMA feature in 3.16 kernel with the appropriate CONFIG_CMA_ALIGNMENT and CONFIG_CMA_SIZE_MBYTES set. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
-
Jon Mason authored
Update my contact info to my personal email address and add Dave Jiang. Signed-off-by: Jon Mason <jon.mason@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com>
-
Jon Mason authored
The detection of an uneven number of queues on the given memory windows was not correct. The mw_num is zero based and the mod should be division to spread them evenly over the mw's. Signed-off-by: Jon Mason <jon.mason@intel.com>
-
Al Viro authored
read_seqretry() returns true on mismatch, not on match... Cc: stable@vger.kernel.org # 3.15+ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
and lock the right list there Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
double-free is a bad thing Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
- 13 Sep, 2014 8 commits
-
-
Linus Torvalds authored
Merge branches 'locking-urgent-for-linus' and 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull futex and timer fixes from Thomas Gleixner: "A oneliner bugfix for the jinxed futex code: - Drop hash bucket lock in the error exit path. I really could slap myself for intruducing that bug while fixing all the other horror in that code three month ago ... and the timer department is not too proud about the following fixes: - Deal with a long standing rounding bug in the timeval to jiffies conversion. It's a real issue and this fix fell through the cracks for quite some time. - Another round of alarmtimer fixes. Finally this code gets used more widely and the subtle issues hidden for quite some time are noticed and fixed. Nothing really exciting, just the itty bitty details which bite the serious users here and there" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: futex: Unlock hb->lock in futex_wait_requeue_pi() error path * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: alarmtimer: Lock k_itimer during timer callback alarmtimer: Do not signal SIGEV_NONE timers alarmtimer: Return relative times in timer_gettime jiffies: Fix timeval conversion to jiffies
-
Guy Martin authored
The current LWS cas only works correctly for 32bit. The new LWS allows for CAS operations of variable size. Signed-off-by: Guy Martin <gmsoft@tuxicoman.be> Cc: <stable@vger.kernel.org> # 3.13+ Signed-off-by: Helge Deller <deller@gmx.de>
-
Linus Torvalds authored
Josef Bacik found a performance regression between 3.2 and 3.10 and narrowed it down to commit bfcfaa77 ("vfs: use 'unsigned long' accesses for dcache name comparison and hashing"). He reports: "The test case is essentially for (i = 0; i < 1000000; i++) mkdir("a$i"); On xfs on a fio card this goes at about 20k dir/sec with 3.2, and 12k dir/sec with 3.10. This is because we spend waaaaay more time in __d_lookup on 3.10 than in 3.2. The new hashing function for strings is suboptimal for < sizeof(unsigned long) string names (and hell even > sizeof(unsigned long) string names that I've tested). I broke out the old hashing function and the new one into a userspace helper to get real numbers and this is what I'm getting: Old hash table had 1000000 entries, 0 dupes, 0 max dupes New hash table had 12628 entries, 987372 dupes, 900 max dupes We had 11400 buckets with a p50 of 30 dupes, p90 of 240 dupes, p99 of 567 dupes for the new hash My test does the hash, and then does the d_hash into a integer pointer array the same size as the dentry hash table on my system, and then just increments the value at the address we got to see how many entries we overlap with. As you can see the old hash function ended up with all 1 million entries in their own bucket, whereas the new one they are only distributed among ~12.5k buckets, which is why we're using so much more CPU in __d_lookup". The reason for this hash regression is two-fold: - On 64-bit architectures the down-mixing of the original 64-bit word-at-a-time hash into the final 32-bit hash value is very simplistic and suboptimal, and just adds the two 32-bit parts together. In particular, because there is no bit shuffling and the mixing boundary is also a byte boundary, similar character patterns in the low and high word easily end up just canceling each other out. - the old byte-at-a-time hash mixed each byte into the final hash as it hashed the path component name, resulting in the low bits of the hash generally being a good source of hash data. That is not true for the word-at-a-time case, and the hash data is distributed among all the bits. The fix is the same in both cases: do a better job of mixing the bits up and using as much of the hash data as possible. We already have the "hash_32|64()" functions to do that. Reported-by: Josef Bacik <jbacik@fb.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Chris Mason <clm@fb.com> Cc: linux-fsdevel@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
The hash_64() function historically does the multiply by the GOLDEN_RATIO_PRIME_64 number with explicit shifts and adds, because unlike the 32-bit case, gcc seems unable to turn the constant multiply into the more appropriate shift and adds when required. However, that means that we generate those shifts and adds even when the architecture has a fast multiplier, and could just do it better in hardware. Use the now-cleaned-up CONFIG_ARCH_HAS_FAST_MULTIPLIER (together with "is it a 64-bit architecture") to decide whether to use an integer multiply or the explicit sequence of shift/add instructions. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
It used to be an ad-hoc hack defined by the x86 version of <asm/bitops.h> that enabled a couple of library routines to know whether an integer multiply is faster than repeated shifts and additions. This just makes it use the real Kconfig system instead, and makes x86 (which was the only architecture that did this) select the option. NOTE! Even for x86, this really is kind of wrong. If we cared, we would probably not enable this for builds optimized for netburst (P4), where shifts-and-adds are generally faster than multiplies. This patch does *not* change that kind of logic, though, it is purely a syntactic change with no code changes. This was triggered by the fact that we have other places that really want to know "do I want to expand multiples by constants by hand or not", particularly the hash generation code. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dmLinus Torvalds authored
Pull device mapper fix from Mike Snitzer: "Fix a race in the DM cache target that caused dirty blocks to be marked as clean. This could cause no writeback to occur or spurious dirty block counts" * tag 'dm-3.17-fix2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm cache: fix race causing dirty blocks to be marked as clean
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "A small collection of fixes for the current rc series. This contains: - Two small blk-mq patches from Rob Elliott, cleaning up error case at init time. - A fix from Ming Lei, fixing SG merging for blk-mq where QUEUE_FLAG_SG_NO_MERGE is the default. - A dev_t minor lifetime fix from Keith, fixing an issue where a minor might be reused before all references to it were gone. - Fix from Alan Stern where an unbalanced queue bypass caused SCSI some headaches when it does a series of add/del on devices without fully registrering the queue. - A fix from me for improving the scaling of tag depth in blk-mq if we are short on memory" * 'for-linus' of git://git.kernel.dk/linux-block: blk-mq: scale depth and rq map appropriate if low on memory Block: fix unbalanced bypass-disable in blk_register_queue block: Fix dev_t minor allocation lifetime blk-mq: cleanup after blk_mq_init_rq_map failures blk-mq: pass along blk_mq_alloc_tag_set return values blk-merge: fix blk_recount_segments
-
Linus Torvalds authored
Merge tag 'stable/for-linus-3.17-b-rc4-arm-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull Xen ARM bugfix from Stefano Stabellini: "The patches fix the "xen_add_mach_to_phys_entry: cannot add" bug that has been affecting xen on arm and arm64 guests since 3.16. They require a few hypervisor side changes that just went in xen-unstable. A couple of days ago David sent out a pull request with a few other Xen fixes (it is already in master). Sorry we didn't synchronized better among us" * tag 'stable/for-linus-3.17-b-rc4-arm-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/arm: remove mach_to_phys rbtree xen/arm: reimplement xen_dma_unmap_page & friends xen/arm: introduce XENFEAT_grant_map_identity
-
- 12 Sep, 2014 2 commits
-
-
Richard Larocque authored
Locks the k_itimer's it_lock member when handling the alarm timer's expiry callback. The regular posix timers defined in posix-timers.c have this lock held during timout processing because their callbacks are routed through posix_timer_fn(). The alarm timers follow a different path, so they ought to grab the lock somewhere else. Cc: stable@vger.kernel.org Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Sharvil Nanavati <sharvil@google.com> Signed-off-by: Richard Larocque <rlarocque@google.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
-
Richard Larocque authored
Avoids sending a signal to alarm timers created with sigev_notify set to SIGEV_NONE by checking for that special case in the timeout callback. The regular posix timers avoid sending signals to SIGEV_NONE timers by not scheduling any callbacks for them in the first place. Although it would be possible to do something similar for alarm timers, it's simpler to handle this as a special case in the timeout. Prior to this patch, the alarm timer would ignore the sigev_notify value and try to deliver signals to the process anyway. Even worse, the sanity check for the value of sigev_signo is skipped when SIGEV_NONE was specified, so the signal number could be bogus. If sigev_signo was an unitialized value (as it often would be if SIGEV_NONE is used), then it's hard to predict which signal will be sent. Cc: stable@vger.kernel.org Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Sharvil Nanavati <sharvil@google.com> Signed-off-by: Richard Larocque <rlarocque@google.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
-