- 20 Aug, 2019 13 commits
-
-
James Smart authored
If the adapter is reset while there are outstanding ELS's, subsequent reinitialization of the adapter will fail as it has not recovered all of the io contexts relative to the ELS's. If an ELS timed out or otherwise failed and an the ELS was attempted to be aborted (which changes the ELS completion context), in causes where the driver generates completions for the outstanding IO as the adapter would not due to being reset, the driver released only the ELS context and failed to release the abort context. When the adapter went to reinit, as it had not received all of the contexts, it failed to reinit. Fix by having the ELS completion handler identify the driver-generated completion status and release the abort context. Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
Unusually high IO latency can be observed with little IO in progress. The latency may remain high regardless of amount of IO and can only be cleared by forcing lpfc_fcp_imax values to non-zero and then back to zero. The driver's eq_delay mechanism that scales the interrupt coalescing based on io completion load failed to reduce or turn off coalescing when load decreased. Specifically, if no io completed on a cpu within an eq_delay polling window, the eq delay processing was skipped and no change was made to the coalescing values. This left the coalescing values set when they were no longer applicable. Fix by always clearing the percpu counters for each time period and always run the eq_delay calculations if an eq has a non-zero coalescing value. Signed-off-by:
-
James Smart authored
If a timer routine uses workqueues, it could fire before the workqueue is allocated. Fix by allocating the workqueue before the timer routines are setup Signed-off-by:
-
James Smart authored
After seeing some interoperability issues with ADISC, it was determined the ELS definitions in lpfc were using types that allowed the compiler to add pad to the structure, causing the structure to no longer be per spec. The offending structures are ADISC, FAN, and RNID. This patch implements the simple fix of eliminating the pad by forcing the compiler to pack the structure. Care was taken to ensure field accesses won't be by operations that would hit a bad field alignment. The better solution would be to convert to the uapi fc header definitions, but the number of changes required to do is rather intrusive so this course of action was deferred. Signed-off-by:
-
James Smart authored
When connected to a high number of remote ports, the driver is encountering PLOGI errors. The errors are due to adapter detected failures indicating illegal field values. Turns out the driver was prematurely clearing an RPI bitmask before waiting for an UNREG_RPI mailbox completion. This allowed the RPI to be reused before it was actually available. Fix by clearing RPI bitmask only after UNREG_RPI mailbox completion. Signed-off-by:
-
James Smart authored
scsi-mq operation inherently performs pre-allocation of resources for blk-mq request queues. Even though the kdump environment reduces the configuration to a single CPU, thus 1 hardware queue, which helps significantly, the resources are still rather large due to the per request allocations. blk-mq pre-allocations can be over 4KB per request. With adapter can_queue values in the 4k or 8k range, this can easily be 32MBs before any other driver memory is factored in. Driver SGL DMA buffer allocation can be up to 8KB per request as well adding an additional 64MB. Totals are well over 100MB for a single shost. Given kdump memory auto-sizing utilities don't accommodate this amount of memory well, it's very possible for kdump to fail due to lack of memory. Fix by having the driver recognize that it is booting within a kdump context and reduce the number of requests it will support to a more reasonable value. Signed-off-by:
-
Hariprasad Kelam authored
As dma_pool_destroy and mempool_destroy functions has NULL check. We may not need NULL check before calling them. Fix below warnings reported by coccicheck ./drivers/scsi/lpfc/lpfc_mem.c:252:2-18: WARNING: NULL check before some freeing functions is not needed. ./drivers/scsi/lpfc/lpfc_mem.c:255:2-18: WARNING: NULL check before some freeing functions is not needed. ./drivers/scsi/lpfc/lpfc_mem.c:258:2-18: WARNING: NULL check before some freeing functions is not needed. ./drivers/scsi/lpfc/lpfc_mem.c:261:2-18: WARNING: NULL check before some freeing functions is not needed. ./drivers/scsi/lpfc/lpfc_mem.c:265:2-18: WARNING: NULL check before some freeing functions is not needed. ./drivers/scsi/lpfc/lpfc_mem.c:269:2-17: WARNING: NULL check before some freeing functions is not needed. Signed-off-by:
Hariprasad Kelam <hariprasad.kelam@gmail.com> Reviewed-by:
James Smart <james.smart@broadcom.com> Signed-off-by:
-
Nishka Dasgupta authored
Static structure ufs_hba_qcom_vops, of type ufs_hba_variant_ops, is used only once, when it is passed as the second argument to function ufshcd_pltfrm_init(). In the definition of ufshcd_pltfrm_init(), its second parameter (corresponding to ufs_hba_qcom_vops) is declared as constant. Hence declare ufs_hba_qcom_vops itself constant as well to protect it from unintended modification. Issue found with Coccinelle. Signed-off-by:
Nishka Dasgupta <nishkadg.linux@gmail.com> Reviewed-by:
Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by:
-
Fuqian Huang authored
As spin_unlock_irq will enable interrupts. Function lpfc_findnode_rpi is called from lpfc_sli_abts_err_handler (./drivers/scsi/lpfc/lpfc_sli.c) <- lpfc_sli_async_event_handler <- lpfc_sli_process_unsol_iocb <- lpfc_sli_handle_fast_ring_event <- lpfc_sli_fp_intr_handler <- lpfc_sli_intr_handler and lpfc_sli_intr_handler is an interrupt handler. Interrupts are enabled in interrupt handler. Use spin_lock_irqsave/spin_unlock_irqrestore instead of spin_(un)lock_irq in IRQ context to avoid this. Signed-off-by:Fuqian Huang <huangfq.daxian@gmail.com> Reviewed-by:
-
Fuqian Huang authored
Remove the redundant initialization code. Signed-off-by:
-
Colin Ian King authored
Variable ret is initialized to a value that is never read and it is re-assigned later and immediately returns. Clean up the code by removing rc and just returning 0. [mkp: typo] Addresses-Coverity: ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Acked-by:
Karan Tilak Kumar <kartilak@cisco.com> Signed-off-by:
-
Martin Wilck authored
Avoid code duplication between qla2x00_alloc_offload_mem() and qla2x00_alloc_fw_dump() by moving the FCE and EFT buffer allocation and initialization to separate functions. Cleanly track failure and success by making sure that the ha->eft, ha->fce and respective eft_dma, fce_dma members are set if and only if the buffers are properly allocated and initialized. Avoid pointless buffer reallocation. Eliminate some goto statements. Make sure the fce_enabled flag is cleared when the FCE buffer is freed. Fixes: ad0a0b01 ("scsi: qla2xxx: Fix Firmware dump size for Extended login and Exchange Offload") Fixes: a28d9e4e ("scsi: qla2xxx: Add support for multiple fwdump templates/segments") Cc: Joe Carnuccio <joe.carnuccio@cavium.com> Cc: Quinn Tran <qutran@marvell.com> Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Martin Wilck <mwilck@suse.com> Tested-by:
Himanshu Madhani <hmadhani@marvell.com> Reviewed-by:
-
Martin Wilck authored
In qla2x00_alloc_fw_dump(), an existing EFT buffer (e.g. from previous invocation of qla2x00_alloc_offload_mem()) is freed. The buffer is then re-allocated, but without setting the eft and eft_dma fields to the new values. Fixes: a28d9e4e ("scsi: qla2xxx: Add support for multiple fwdump templates/segments") Cc: Joe Carnuccio <joe.carnuccio@cavium.com> Cc: Quinn Tran <qutran@marvell.com> Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
- 13 Aug, 2019 27 commits
-
-
Masahiro Yamada authored
When CONFIG_UAPI_HEADER_TEST=y, exported headers are compile-tested to make sure they can be included from user-space. Currently, scsi_bsg_fc.h, scsi_netlink.h, and scsi_netlink_fc.h are excluded from the test coverage. To make them join the compile-test, we need to fix the build errors attached below. For a case like this, we decided to use __u{8,16,32,64} variable types in this discussion: https://lkml.org/lkml/2019/6/5/18 Build log: CC usr/include/scsi/scsi_netlink_fc.h.s CC usr/include/scsi/scsi_netlink.h.s CC usr/include/scsi/scsi_bsg_fc.h.s In file included from ./usr/include/scsi/scsi_netlink_fc.h:10:0, from <command-line>:32: ./usr/include/scsi/scsi_netlink.h:29:2: error: unknown type name uint8_t uint8_t version; ^~~~~~~ ./usr/include/scsi/scsi_netlink.h:30:2: error: unknown type name uint8_t uint8_t transport; ^~~~~~~ ./usr/include/scsi/scsi_netlink.h:31:2: error: unknown type name uint16_t uint16_t magic; ^~~~~~~~ ./usr/include/scsi/scsi_netlink.h:32:2: error: unknown type name uint16_t uint16_t msgtype; ^~~~~~~~ CC usr/include/rdma/vmw_pvrdma-abi.h.s ./usr/include/scsi/scsi_netlink.h:33:2: error: unknown type name uint16_t uint16_t msglen; ^~~~~~~~ ./usr/include/scsi/scsi_netlink.h:34:33: error: uint64_t undeclared here (not in a function); did you mean __uint128_t ? } __attribute__((aligned(sizeof(uint64_t)))); ^~~~~~~~ __uint128_t ./usr/include/scsi/scsi_netlink.h:78:2: error: expected specifier-qualifier-list before uint64_t uint64_t vendor_id; ^~~~~~~~ In file included from <command-line>:32:0: ./usr/include/scsi/scsi_netlink_fc.h:46:2: error: expected specifier-qualifier-list before uint64_t uint64_t seconds; ^~~~~~~~ make[2]: *** [scripts/Makefile.build;302: usr/include/scsi/scsi_netlink_fc.h.s] Error 1 make[2]: *** Waiting for unfinished jobs.... In file included from <command-line>:32:0: ./usr/include/scsi/scsi_netlink.h:29:2: error: unknown type name uint8_t uint8_t version; ^~~~~~~ ./usr/include/scsi/scsi_netlink.h:30:2: error: unknown type name uint8_t uint8_t transport; ^~~~~~~ ./usr/include/scsi/scsi_netlink.h:31:2: error: unknown type name uint16_t uint16_t magic; ^~~~~~~~ ./usr/include/scsi/scsi_netlink.h:32:2: error: unknown type name uint16_t uint16_t msgtype; ^~~~~~~~ ./usr/include/scsi/scsi_netlink.h:33:2: error: unknown type name uint16_t uint16_t msglen; ^~~~~~~~ ./usr/include/scsi/scsi_netlink.h:34:33: error: uint64_t undeclared here (not in a function); did you mean __uint128_t ? } __attribute__((aligned(sizeof(uint64_t)))); ^~~~~~~~ __uint128_t ./usr/include/scsi/scsi_netlink.h:78:2: error: expected specifier-qualifier-list before uint64_t uint64_t vendor_id; ^~~~~~~~ make[2]: *** [scripts/Makefile.build;302: usr/include/scsi/scsi_netlink.h.s] Error 1 In file included from <command-line>:32:0: ./usr/include/scsi/scsi_bsg_fc.h:69:2: error: unknown type name uint8_t uint8_t reserved; ^~~~~~~ ./usr/include/scsi/scsi_bsg_fc.h:72:2: error: unknown type name uint8_t uint8_t port_id[3]; ^~~~~~~ ./usr/include/scsi/scsi_bsg_fc.h:90:2: error: unknown type name uint8_t uint8_t reserved; ^~~~~~~ ./usr/include/scsi/scsi_bsg_fc.h:93:2: error: unknown type name uint8_t uint8_t port_id[3]; ^~~~~~~ ./usr/include/scsi/scsi_bsg_fc.h:114:2: error: unknown type name uint8_t uint8_t command_code; ^~~~~~~ ./usr/include/scsi/scsi_bsg_fc.h:117:2: error: unknown type name uint8_t uint8_t port_id[3]; ^~~~~~~ ./usr/include/scsi/scsi_bsg_fc.h:154:2: error: unknown type name uint32_t uint32_t status; /* See FC_CTELS_STATUS_xxx */ ^~~~~~~~ ./usr/include/scsi/scsi_bsg_fc.h:158:3: error: unknown type name uint8_t uint8_t action; /* fragment_id for CT REJECT */ ^~~~~~~ ./usr/include/scsi/scsi_bsg_fc.h:159:3: error: unknown type name uint8_t uint8_t reason_code; ^~~~~~~ ./usr/include/scsi/scsi_bsg_fc.h:160:3: error: unknown type name uint8_t uint8_t reason_explanation; ^~~~~~~ ./usr/include/scsi/scsi_bsg_fc.h:161:3: error: unknown type name uint8_t uint8_t vendor_unique; ^~~~~~~ ./usr/include/scsi/scsi_bsg_fc.h:177:2: error: unknown type name uint8_t uint8_t reserved; ^~~~~~~ ./usr/include/scsi/scsi_bsg_fc.h:180:2: error: unknown type name uint8_t uint8_t port_id[3]; ^~~~~~~ ./usr/include/scsi/scsi_bsg_fc.h:185:2: error: unknown type name uint32_t uint32_t preamble_word0; /* revision & IN_ID */ ^~~~~~~~ ./usr/include/scsi/scsi_bsg_fc.h:186:2: error: unknown type name uint32_t uint32_t preamble_word1; /* GS_Type, GS_SubType, Options, Rsvd */ ^~~~~~~~ ./usr/include/scsi/scsi_bsg_fc.h:187:2: error: unknown type name uint32_t uint32_t preamble_word2; /* Cmd Code, Max Size */ ^~~~~~~~ ./usr/include/scsi/scsi_bsg_fc.h:207:2: error: unknown type name uint64_t uint64_t vendor_id; ^~~~~~~~ ./usr/include/scsi/scsi_bsg_fc.h:210:2: error: unknown type name uint32_t uint32_t vendor_cmd[0]; ^~~~~~~~ ./usr/include/scsi/scsi_bsg_fc.h:217:2: error: unknown type name uint32_t uint32_t vendor_rsp[0]; ^~~~~~~~ ./usr/include/scsi/scsi_bsg_fc.h:236:2: error: unknown type name uint8_t uint8_t els_code; ^~~~~~~ ./usr/include/scsi/scsi_bsg_fc.h:254:2: error: unknown type name uint32_t uint32_t preamble_word0; /* revision & IN_ID */ ^~~~~~~~ ./usr/include/scsi/scsi_bsg_fc.h:255:2: error: unknown type name uint32_t uint32_t preamble_word1; /* GS_Type, GS_SubType, Options, Rsvd */ ^~~~~~~~ ./usr/include/scsi/scsi_bsg_fc.h:256:2: error: unknown type name uint32_t uint32_t preamble_word2; /* Cmd Code, Max Size */ ^~~~~~~~ ./usr/include/scsi/scsi_bsg_fc.h:268:2: error: unknown type name uint32_t uint32_t msgcode; ^~~~~~~~ ./usr/include/scsi/scsi_bsg_fc.h:292:2: error: unknown type name uint32_t uint32_t result; ^~~~~~~~ ./usr/include/scsi/scsi_bsg_fc.h:295:2: error: unknown type name uint32_t uint32_t reply_payload_rcv_len; ^~~~~~~~ Signed-off-by:Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Frederick Lawler authored
Commit 8c0d3a02 ("PCI: Add accessors for PCI Express Capability") added accessors for the PCI Express Capability so that drivers didn't need to be aware of differences between v1 and v2 of the PCI Express Capability. Replace pci_read_config_word() and pci_write_config_word() calls with pcie_capability_read_word() and pcie_capability_write_word(). Signed-off-by:
Frederick Lawler <fred@fredlawl.com> Signed-off-by:
-
Frederick Lawler authored
Commit 8c0d3a02 ("PCI: Add accessors for PCI Express Capability") added accessors for the PCI Express Capability so that drivers didn't need to be aware of differences between v1 and v2 of the PCI Express Capability. Replace pci_read_config_word() and pci_write_config_word() calls with pcie_capability_read_word() and pcie_capability_write_word(). Signed-off-by:
-
Colin Ian King authored
Variable retv is initialized to a value that is never read and it is re-assigned later. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by:
-
Christophe JAILLET authored
This should be 'pmcraid', not 'pcmraid' Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Gustavo A. R. Silva authored
Mark switch cases where we are expecting to fall through. Fix the following warnings (Building: rpc_defconfig arm): drivers/scsi/arm/fas216.c: In function fas216_disconnect_intr : drivers/scsi/arm/fas216.c:913:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (fas216_get_last_msg(info, info->scsi.msgin_fifo) == ABORT) { ^ drivers/scsi/arm/fas216.c:919:2: note: here default: /* huh? */ ^~~~~~~ drivers/scsi/arm/fas216.c: In function fas216_kick : drivers/scsi/arm/fas216.c:1959:3: warning: this statement may fall through [-Wimplicit-fallthrough=] fas216_allocate_tag(info, SCpnt); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/arm/fas216.c:1960:2: note: here case TYPE_OTHER: ^~~~ drivers/scsi/arm/fas216.c: In function fas216_busservice_intr : drivers/scsi/arm/fas216.c:1413:3: warning: this statement may fall through [-Wimplicit-fallthrough=] fas216_stoptransfer(info); ^~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/arm/fas216.c:1414:2: note: here case STATE(STAT_STATUS, PHASE_SELSTEPS):/* Sel w/ steps -> Status */ ^~~~ drivers/scsi/arm/fas216.c:1424:3: warning: this statement may fall through [-Wimplicit-fallthrough=] fas216_stoptransfer(info); ^~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/arm/fas216.c:1425:2: note: here case STATE(STAT_MESGIN, PHASE_COMMAND): /* Command -> Message In */ ^~~~ drivers/scsi/arm/fas216.c: In function fas216_funcdone_intr : drivers/scsi/arm/fas216.c:1573:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if ((stat & STAT_BUSMASK) == STAT_MESGIN) { ^ drivers/scsi/arm/fas216.c:1579:2: note: here default: ^~~~~~~ drivers/scsi/arm/fas216.c: In function fas216_handlesync : drivers/scsi/arm/fas216.c:605:20: warning: this statement may fall through [-Wimplicit-fallthrough=] info->scsi.phase = PHASE_MSGOUT_EXPECT; ~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~ drivers/scsi/arm/fas216.c:607:2: note: here case async: ^~~~ Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Chandrakanth Patil authored
This patch provides a module parameter and sysfs interface to select whether the queue depth for each device should be based on the value suggested by firmware (the default) or the maximum supported by the controller (can_queue). Although we have a sysfs interface per sdev to change the queue depth of individual scsi devices, this implementation provides a single sysfs entry per shost to switch between the controller max and the value reported by firmware. The module parameter can provide an interface for one time grub settings and provides persistent settings across the boot. [mkp: tweaked commit desc] Signed-off-by:
Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by:
Chandrakanth Patil <chandrakanth.patil@broadcom.com> Signed-off-by:
-
Bart Van Assche authored
BUG: KASAN: null-ptr-deref in qla24xx_handle_plogi_done_event+0x134/0x9f0 [qla2xxx] Read of size 4 at addr 00000000000000a0 by task swapper/2/0 CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.2.0-dbg+ #1 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Call Trace: <IRQ> dump_stack+0x8a/0xd6 __kasan_report.cold+0x5/0x41 kasan_report+0x16/0x20 __asan_load4+0x7e/0x80 qla24xx_handle_plogi_done_event+0x134/0x9f0 [qla2xxx] qla2x00_els_dcmd2_sp_done+0x15f/0x230 [qla2xxx] qla24xx_els_ct_entry+0x3b3/0x610 [qla2xxx] qla24xx_process_response_queue+0x514/0x10e0 [qla2xxx] qla24xx_msix_rsp_q+0x80/0x100 [qla2xxx] __handle_irq_event_percpu+0x72/0x450 handle_irq_event_percpu+0x74/0xf0 handle_irq_event+0x5e/0x8f handle_edge_irq+0x13a/0x320 handle_irq+0x30/0x40 do_IRQ+0x91/0x190 common_interrupt+0xf/0xf </IRQ> RIP: 0010:default_idle+0x31/0x230 Fixes: 8777e431 ("scsi: qla2xxx: Migrate NVME N2N handling into state machine") # v4.19. Cc: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Tested-by:
-
Bart Van Assche authored
Make the code easier to read by converting 'goto' statements into 'return' statements. Cc: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
-
Bart Van Assche authored
This patch fixes the following Coverity complaint: Null-checking sp->u.iocb_cmd.u.ctarg.rsp suggests that it may be null, but it has already been dereferenced on all paths leading to the check. See also commit e374f9f5 ("scsi: qla2xxx: Migrate switch registration commands away from mailbox interface") # v4.16. Cc: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
-
Bart Van Assche authored
This patch reduces code duplication. Cc: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
-
Bart Van Assche authored
Instead of calling qla2x00_fcport_event_handler() and letting the switch statement inside that function decide which other function to call, call the latter function directly. Remove the event member from the event_arg structure because it is no longer needed. Remove the qla_handle_els_plogi_done() function because it is never called. Cc: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
-
Bart Van Assche authored
It is easy to mix up the QLA_* and the MBS_* status codes. Complain loudly if that happens. Cc: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
-
Bart Van Assche authored
The C language supports implicit casting of void pointers to non-void pointers. Remove explicit sts_entry_* casts that are not necessary. Cc: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
-
Bart Van Assche authored
Split srb_cmd.ctx into two pointers such that the compiler can check the type of that pointer. Cc: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
-
Bart Van Assche authored
Not calling sp->done() from the command completion path is a severe bug. Hence complain loudly if that happens. Cc: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
-
Bart Van Assche authored
The LIO core requires that the target driver callback functions .queue_data_in() and .queue_status() call target_put_sess_cmd() or transport_generic_free_cmd(). These calls may happen synchronously or asynchronously. Make sure that one of these LIO functions is called in case a command has been aborted. This patch avoids that the code for removing a session hangs due to commands that do not make progress. Cc: Himanshu Madhani <hmadhani@marvell.com> Fixes: 694833ee ("scsi: tcm_qla2xxx: Do not allow aborted cmd to advance.") # v4.13. Fixes: a07100e0 ("qla2xxx: Fix TMR ABORT interaction issue between qla2xxx and TCM") # v4.5. Signed-off-by:
-
Bart Van Assche authored
This patch reduces code duplication. Cc: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
-
Bart Van Assche authored
Since struct sg_table is used in nvme-fc-driver.h, include <linux/scatterlist.h> from that header file. Since no definitions or declarations from <linux/blk-mq.h> are used in the qla_nvme.h header file, do not include <linux/blk-mq.h> from that header file. Cc: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
-
Bart Van Assche authored
Avoid that this function crashes if mcmd == NULL. Cc: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
-
Bart Van Assche authored
Instead of allocating a struct srb dynamically from inside .queuecommand(), set qla2xxx_driver_template.cmd_size such that struct scsi_cmnd and struct srb are contiguous. Do not call QLA_QPAIR_MARK_BUSY() / QLA_QPAIR_MARK_NOT_BUSY() for SRBs associated with SCSI commands. That is safe because scsi_remove_host() is called before queue pairs are deleted and scsi_remove_host() waits for all outstanding SCSI commands to finish. Cc: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
-
Bart Van Assche authored
This patch does not change any functionality but makes the next patch easier to read. Cc: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
-
Bart Van Assche authored
Since all pointers passed to the srb_t.done() and srb_t.free() functions have type srb_t, change the type of the first argument of these functions from void * into struct srb *. This allows the compiler to verify the argument types for these functions. This patch does not change any functionality. Cc: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
-
Bart Van Assche authored
Use the same approach for encoding the destination ID as the approach used by qlt_update_vp_map(). Cc: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
-
Bart Van Assche authored
According to the firmware documentation responder mode must be set for ELS pass-through IOCBs if a response is expected. Cc: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
-
Bart Van Assche authored
According to the firmware documentation the firmware expects all ELS pass-through IOCB parameters in little endian format. Make this explicit. Cc: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
-
Bart Van Assche authored
This patch fixes several Coverity complaints about reading data that has not been initialized. Cc: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
-
