- 10 May, 2013 18 commits
-
-
James Bottomley authored
Signed-off-by:James Bottomley <JBottomley@Parallels.com>
-
James Bottomley authored
Signed-off-by: -
Chad Dupuis authored
Signed-off-by:
Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by:
Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by:
-
Mike Christie authored
This fixes a bug where the iscsi class/driver did not do a put_device when a sess/conn device was found. This also simplifies the interface by not having to pass in some arguments that were duplicated and did not need to be exported. Reported-by:
Zhao Hongjiang <zhaohongjiang@huawei.com> Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Acked-by:
Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by:
-
James Bottomley authored
These enums have been separate since the dawn of SAS, mainly because the latter is a procotol only enum and the former includes additional state for libsas. The dichotomy causes endless confusion about which one you should use where and leads to pointless warnings like this: drivers/scsi/mvsas/mv_sas.c: In function 'mvs_update_phyinfo': drivers/scsi/mvsas/mv_sas.c:1162:34: warning: comparison between 'enum sas_device_type' and 'enum sas_dev_type' [-Wenum-compare] Fix by eliminating one of them. The one kept is effectively the sas.h one, but call it sas_device_type and make sure the enums are all properly namespaced with the SAS_ prefix. Signed-off-by: -
Sakthivel K authored
Modified thermal configuration to happen after interrupt registration Added SAS controller configuration during initialization Added error handling logic to handle I_T_Nexus errors and variants [jejb: fix up tabs and spaces issues] Signed-off-by:
Anand Kumar S <AnandKumar.Santhanam@pmcs.com> Acked-by:
Jack Wang <jack_wang@usish.com> Reviewed-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
-
Sakthivel K authored
Handled NCQ errors in the low level driver as the FW is not providing the faulty tag for NCQ errors for libsas to recover. [jejb: fix checkpatch issues] Signed-off-by:
-
Sakthivel K authored
Individual WWN read operations based on controller. PM8081 - Read WWN from Flash VPD. PM8088/89 - Read WWN from EEPROM. PM8001 - Read WWN from NVM. Signed-off-by:
Sakthivel K <Sakthivel.SaravananKamalRaju@pmcs.com> Signed-off-by:
-
Sakthivel K authored
Changed name in driver to pm80xx. Updated debug messages. Signed-off-by:
-
Sakthivel K authored
Performing pci_free_consistent in tasklet had result in a core dump. So allocated a new memory region for it. Fix for passing proper address and operation in firmware flash update. Signed-off-by:
-
Sakthivel K authored
Additional bar shift for new SPC firmware, applicable to device id 0x8081 only. Signed-off-by:
-
Sakthivel K authored
Implementation of SPCv/ve specific hardware functionality and macros. Changing common functionalities wrt SPCv/ve operations. Conditional checks for SPC specific operations. Signed-off-by:
-
Sakthivel K authored
Implementation of interrupt handlers and tasklets to support upto 64 interrupt for the device. Signed-off-by:
-
Sakthivel K authored
Update of function prototype for common function to SPC and SPCv/ve. Multiple queues implementation for IO. Signed-off-by:
-
Sakthivel K authored
Memory allocation and configuration of multiple inbound and outbound queues. Signed-off-by:
-
Sakthivel K authored
Updated pci id table with device, vendor, subdevice and subvendor ids for 8081, 8088, 8089 SAS/SATA controllers. Added SPCv/ve related macros. Updated macros, hba info structure and other structures for SPCv/ve. Update of structure and variable names for SPC hardware functionalities. Signed-off-by:
-
James Bottomley authored
lpfc uses the generic checksum as well as the T10DIF one from the lib/ directory, so make sure they're selected. Reported-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Hannes Reinecke authored
scsi_send_eh_cmnd() is calling queuecommand() directly, so it needs to check the return value here. The only valid return codes for queuecommand() are 'busy' states, so we need to wait for a bit to allow the LLDD to recover. Based on an earlier patch from Wen Xiong. [jejb: fix confusion between msec and jiffies values and other issues] [bvanassche: correct stall_for interval] Cc: Wen Xiong <wenxiong@linux.vnet.ibm.com> Cc: Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
-
- 08 May, 2013 22 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infinibandLinus Torvalds authored
Pull InfiniBand/RDMA changes from Roland Dreier: - XRC transport fixes - Fix DHCP on IPoIB - mlx4 preparations for flow steering - iSER fixes - miscellaneous other fixes * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (23 commits) IB/iser: Add support for iser CM REQ additional info IB/iser: Return error to upper layers on EAGAIN registration failures IB/iser: Move informational messages from error to info level IB/iser: Add module version mlx4_core: Expose a few helpers to fill DMFS HW strucutures mlx4_core: Directly expose fields of DMFS HW rule control segment mlx4_core: Change a few DMFS fields names to match firmare spec mlx4: Match DMFS promiscuous field names to firmware spec mlx4_core: Move DMFS HW structs to common header file IB/mlx4: Set link type for RAW PACKET QPs in the QP context IB/mlx4: Disable VLAN stripping for RAW PACKET QPs mlx4_core: Reduce warning message for SRQ_LIMIT event to debug level RDMA/iwcm: Don't touch cmid after dropping reference IB/qib: Correct qib_verbs_register_sysfs() error handling IB/ipath: Correct ipath_verbs_register_sysfs() error handling RDMA/cxgb4: Fix SQ allocation when on-chip SQ is disabled SRPT: Fix odd use of WARN_ON() IPoIB: Fix ipoib_hard_header() return value RDMA: Rename random32() to prandom_u32() RDMA/cxgb3: Fix uninitialized variable ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64Linus Torvalds authored
Pull arm64 update from Catalin Marinas: - Since drivers/irqchip/irq-gic.c no longer has dependencies on arm32 specifics (the 'gic' branch merged), it can be enabled on arm64. - Enable arm64 support for poweroff/restart (for code under drivers/power/reset/). - Fixes (dts file, exception handling, bitops) * tag 'arm64-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: arm64: Treat the bitops index argument as an 'int' arm64: Ignore the 'write' ESR flag on cache maintenance faults arm64: dts: fix #address-cells for foundation-v8 arm64: vexpress: Add support for poweroff/restart arm64: Enable support for the ARM GIC interrupt controller
-
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fsLinus Torvalds authored
Pull f2fs updates from Jaegeuk Kim: "This patch-set includes the following major enhancement patches. - introduce a new gloabl lock scheme - add tracepoints on several major functions - fix the overall cleaning process focused on victim selection - apply the block plugging to merge IOs as much as possible - enhance management of free nids and its list - enhance the readahead mode for node pages - address several cretical deadlock conditions - reduce lock_page calls The other minor bug fixes and enhancements are as follows. - calculation mistakes: overflow - bio types: READ, READA, and READ_SYNC - fix the recovery flow, data races, and null pointer errors" * tag 'f2fs-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (68 commits) f2fs: cover free_nid management with spin_lock f2fs: optimize scan_nat_page() f2fs: code cleanup for scan_nat_page() and build_free_nids() f2fs: bugfix for alloc_nid_failed() f2fs: recover when journal contains deleted files f2fs: continue to mount after failing recovery f2fs: avoid deadlock during evict after f2fs_gc f2fs: modify the number of issued pages to merge IOs f2fs: remove useless #include <linux/proc_fs.h> as we're now using sysfs as debug entry. f2fs: fix inconsistent using of NM_WOUT_THRESHOLD f2fs: check truncation of mapping after lock_page f2fs: enhance alloc_nid and build_free_nids flows f2fs: add a tracepoint on f2fs_new_inode f2fs: check nid == 0 in add_free_nid f2fs: add REQ_META about metadata requests for submit f2fs: give a chance to merge IOs by IO scheduler f2fs: avoid frequent background GC f2fs: add tracepoints to debug checkpoint request f2fs: add tracepoints for write page operations f2fs: add tracepoints to debug the block allocation ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rkuo/linux-hexagon-kernelLinus Torvalds authored
Pull Hexagon fixes from Richard Kuo: "A bug fix and a Kconfig cleanup" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rkuo/linux-hexagon-kernel: HEXAGON: Remove non existent reference to GENERIC_KERNEL_EXECVE & GENERIC_KERNEL_THREAD Hexagon: fix register used to call do_work_pending
-
Chris Mason authored
Commit 8a965b3b ("mm, slab_common: Fix bootstrap creation of kmalloc caches") introduced a regression that caused us to crash early during boot. The commit was introducing ordering of slab creation, making sure two odd-sized slabs were created after specific powers of two sizes. But, if any of the power of two slabs were created earlier during boot, slabs at index 1 or 2 might not get created at all. This patch makes sure none of the slabs get skipped. Tony Lindgren bisected this down to the offending commit, which really helped because bisect kept bringing me to almost but not quite this one. Signed-off-by:
Chris Mason <chris.mason@fusionio.com> Acked-by:
Christoph Lameter <cl@linux.com> Acked-by:
Tony Lindgren <tony@atomide.com> Acked-by:
Soren Brinkmann <soren.brinkmann@xilinx.com> Tested-by:
Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Tested-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Roland Dreier authored
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block driver updates from Jens Axboe: "It might look big in volume, but when categorized, not a lot of drivers are touched. The pull request contains: - mtip32xx fixes from Micron. - A slew of drbd updates, this time in a nicer series. - bcache, a flash/ssd caching framework from Kent. - Fixes for cciss" * 'for-3.10/drivers' of git://git.kernel.dk/linux-block: (66 commits) bcache: Use bd_link_disk_holder() bcache: Allocator cleanup/fixes cciss: bug fix to prevent cciss from loading in kdump crash kernel cciss: add cciss_allow_hpsa module parameter drivers/block/mg_disk.c: add CONFIG_PM_SLEEP to suspend/resume functions mtip32xx: Workaround for unaligned writes bcache: Make sure blocksize isn't smaller than device blocksize bcache: Fix merge_bvec_fn usage for when it modifies the bvm bcache: Correctly check against BIO_MAX_PAGES bcache: Hack around stuff that clones up to bi_max_vecs bcache: Set ra_pages based on backing device's ra_pages bcache: Take data offset from the bdev superblock. mtip32xx: mtip32xx: Disable TRIM support mtip32xx: fix a smatch warning bcache: Disable broken btree fuzz tester bcache: Fix a format string overflow bcache: Fix a minor memory leak on device teardown bcache: Documentation updates bcache: Use WARN_ONCE() instead of __WARN() bcache: Add missing #include <linux/prefetch.h> ...
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block core updates from Jens Axboe: - Major bit is Kents prep work for immutable bio vecs. - Stable candidate fix for a scheduling-while-atomic in the queue bypass operation. - Fix for the hang on exceeded rq->datalen 32-bit unsigned when merging discard bios. - Tejuns changes to convert the writeback thread pool to the generic workqueue mechanism. - Runtime PM framework, SCSI patches exists on top of these in James' tree. - A few random fixes. * 'for-3.10/core' of git://git.kernel.dk/linux-block: (40 commits) relay: move remove_buf_file inside relay_close_buf partitions/efi.c: replace useless kzalloc's by kmalloc's fs/block_dev.c: fix iov_shorten() criteria in blkdev_aio_read() block: fix max discard sectors limit blkcg: fix "scheduling while atomic" in blk_queue_bypass_start Documentation: cfq-iosched: update documentation help for cfq tunables writeback: expose the bdi_wq workqueue writeback: replace custom worker pool implementation with unbound workqueue writeback: remove unused bdi_pending_list aoe: Fix unitialized var usage bio-integrity: Add explicit field for owner of bip_buf block: Add an explicit bio flag for bios that own their bvec block: Add bio_alloc_pages() block: Convert some code to bio_for_each_segment_all() block: Add bio_for_each_segment_all() bounce: Refactor __blk_queue_bounce to not use bi_io_vec raid1: use bio_copy_data() pktcdvd: Use bio_reset() in disabled code to kill bi_idx usage pktcdvd: use bio_copy_data() block: Add bio_copy_data() ...
-
Jaegeuk Kim authored
After build_free_nids() searches free nid candidates from nat pages and current journal blocks, it checks all the candidates if they are allocated so that the nat cache has its nid with an allocated block address. In this procedure, previously we used list_for_each_entry_safe(fnid, next_fnid, &nm_i->free_nid_list, list). But, this is not covered by free_nid_list_lock, resulting in null pointer bug. This patch moves this checking routine inside add_free_nid() in order not to use the spin_lock. Signed-off-by:Jaegeuk Kim <jaegeuk.kim@samsung.com>
-
Haicheng Li authored
When nm_i->fcnt > 2 * MAX_FREE_NIDS, stop scanning other NAT entries. Signed-off-by:
Haicheng Li <haicheng.li@linux.intel.com> [Jaegeuk Kim: fix handling the return value of add_free_nid()] Signed-off-by:
-
Haicheng Li authored
This patch does two cleanups: 1. remove unused variable "fcnt" in build_free_nids(). 2. make scan_nat_page() as void type and remove useless variable "fcnt". Signed-off-by:
-
Haicheng Li authored
Directly drop the free_nid cache when nm_i->fcnt > 2 * MAX_FREE_NIDS Since there is NOT nmi->free_nid_list_lock spinlock protection between a sequential calling of alloc_nid() and alloc_nid_failed(), some other threads may already add new free_nid to the free_nid_list during this period. We need to make sure nmi->fcnt is never > 2 * MAX_FREE_NIDS. Signed-off-by:
-
Chris Fries authored
When recovering a journal file with fsync data for files that have been deleted, don't bail out on recovery. Signed-off-by:
Chris Fries <C.Fries@motorola.com> Reviewed-by:
Russell Knize <rknize2@motorola.com> Reviewed-by:
Jason Hrycay <jason.hrycay@motorola.com> [Jaegeuk Kim: fit the coding style] Signed-off-by:
-
Chris Fries authored
When unable to roll forward the journal, we shouldn't bail out and not mount, we should continue to attempt the mount. Bad recovery data is likely unrecoverable at this point, and requiring the user to try to mount again doesn't solve any issues. Signed-off-by:
-
Jaegeuk Kim authored
o Deadlock case #1 Thread 1: - writeback_sb_inodes - do_writepages - f2fs_write_data_pages - write_cache_pages - f2fs_write_data_page - f2fs_balance_fs - wait mutex_lock(gc_mutex) Thread 2: - f2fs_balance_fs - mutex_lock(gc_mutex) - f2fs_gc - f2fs_iget - wait iget_locked(inode->i_lock) Thread 3: - do_unlinkat - iput - lock(inode->i_lock) - evict - inode_wait_for_writeback o Deadlock case #2 Thread 1: - __writeback_single_inode : set I_SYNC - do_writepages - f2fs_write_data_page - f2fs_balance_fs - f2fs_gc - iput - evict - inode_wait_for_writeback(I_SYNC) In order to avoid this, even though iput is called with the zero-reference count, we need to stop the eviction procedure if the inode is on writeback. So this patch links f2fs_drop_inode which checks the I_SYNC flag. Signed-off-by: -
Catalin Marinas authored
The bitops prototype use an 'int' as the bit index type but the asm implementation assume it to be a 'long'. Since the compiler does not guarantee zeroing the upper 32-bits in a register when used as 'int', change the bitops implementation accordingly. Signed-off-by:Catalin Marinas <catalin.marinas@arm.com>
-
Catalin Marinas authored
ESR.WnR bit is always set on data cache maintenance faults even though the page is not required to have write permission. If a translation fault (page not yet mapped) happens for read-only user address range, Linux incorrectly assumes a permission fault. This patch adds the check of the ESR.CM bit during the page fault handling to ignore the 'write' flag. Signed-off-by:
Tim Northover <Tim.Northover@arm.com> Cc: stable@vger.kernel.org
-
Mark Rutland authored
Commit 90556ca1 ("arm64: vexpress: Add dts files for the ARMv8 RTSM models") added foundation-v8.dts, but erroneously set /cpus/#address-cells = <1> while providing two cells in each cpus/cpu@N node's reg property. As of commit ea393a2e ("arm64: smp: honour #address-size when parsing CPU reg property") we read in as many address cells as specified rather than always reading two. This means that for foundation-v8.dts, we only read the first reg cell (zero) for each cpu node, and receive a lot of warnings at boot of the form "/cpus/cpu@1: duplicate cpu reg properties in the DT". This patch corrects foundation-v8.dts to have the correct value for /cpus/#address-cells. Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Will Deacon <will.deacon@arm.com> Tested-by:
Marc Zyngier <marc.zyngier@arm.com> Acked-by:
-
Catalin Marinas authored
This patch adds the arm_pm_poweroff definition expected by the vexpress-poweroff.c driver and enables the latter for arm64. Signed-off-by:
Pawel Moll <pawel.moll@arm.com>
-
Catalin Marinas authored
This patch enables ARM_GIC on the arm64 kernel. Signed-off-by: -
Catalin Marinas authored
* arm64-prep-gic: irqchip: gic: Perform the gic_secondary_init() call via CPU notifier irqchip: gic: Call handle_bad_irq() directly arm: Move chained_irq_(enter|exit) to a generic file arm: Move the set_handle_irq and handle_arch_irq declarations to asm/irq.h
-
Linus Torvalds authored
Merge more incoming from Andrew Morton: - Various fixes which were stalled or which I picked up recently - A large rotorooting of the AIO code. Allegedly to improve performance but I don't really have good performance numbers (I might have lost the email) and I can't raise Kent today. I held this out of 3.9 and we could give it another cycle if it's all too late/scary. I ended up taking only the first two thirds of the AIO rotorooting. I left the percpu parts and the batch completion for later. - Linus * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (33 commits) aio: don't include aio.h in sched.h aio: kill ki_retry aio: kill ki_key aio: give shared kioctx fields their own cachelines aio: kill struct aio_ring_info aio: kill batch allocation aio: change reqs_active to include unreaped completions aio: use cancellation list lazily aio: use flush_dcache_page() aio: make aio_read_evt() more efficient, convert to hrtimers wait: add wait_event_hrtimeout() aio: refcounting cleanup aio: make aio_put_req() lockless aio: do fget() after aio_get_req() aio: dprintk() -> pr_debug() aio: move private stuff out of aio.h aio: add kiocb_cancel() aio: kill return value of aio_complete() char: add aio_{read,write} to /dev/{null,zero} aio: remove retry-based AIO ...
-
