* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc: Allow handling signals when stack is corrupted.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (29 commits)
  bridge: fix a possible net_device leak
  net: Documentation: RFC 2553bis is now RFC 3493
  atm: br2684: Fix oops due to skb->dev being NULL
  ipv6: Fix ipv6_getsockopt for IPV6_2292PKTOPTIONS
  net: netdev-features.txt update to Documentation/networking/00-INDEX
  vlan: reset headers on accel emulation path
  forcedeth: call vlan_mode only if hw supports vlans
  via-velocity: remove non-tagged packet filtering
  bonding:reset backup and inactive flag of slave
  net_sched: fix port mirror/redirect stats reporting
  sit tunnels: propagate IPv6 transport class to IPv4 Type of Service
  gianfar: reduce stack usage in gianfar_ethtool.c
  net: minor update to Documentation/networking/scaling.txt
  net: add missing entries to Documentation/networking/00-INDEX
  gianfar: prevent buggy hw rx vlan tagging
  net: sh_eth: Fix build by forgot including linux/interrupt.h
  drivers/net/can/sja1000/plx_pci.c: eliminate double free
  usbnet/cdc_ncm: Don't use stack variables for DMA
  vmxnet3: Don't enable vlan filters in promiscuous mode.
  iwlagn: sysfs couldn't find the priv pointer
  ...

Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86-32, vdso: On system call restart after SYSENTER, use int $0x80
  x86, UV: Remove UV delay in starting slave cpus
  x86, olpc: Wait for last byte of EC command to be accepted

When we enter a 32-bit system call via SYSENTER or SYSCALL, we shuffle
the arguments to match the int $0x80 calling convention.  This was
probably a design mistake, but it's what it is now.  This causes
errors if the system call as to be restarted.

For SYSENTER, we have to invoke the instruction from the vdso as the
return address is hardcoded.  Accordingly, we can simply replace the
jump in the vdso with an int $0x80 instruction and use the slower
entry point for a post-restart.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/r/CA%2B55aFztZ=r5wa0x26KJQxvZOaQq8s2v3u50wCyJcA-Sc4g8gQ@mail.gmail.com
Cc: <stable@kernel.org>

Fixes fallout due to the removal of the cast in commit aa462abe
("mm: fix __page_to_pfn for a const struct page argument")
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-m68k@lists.linux-m68k.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: fix tracing builds inside the source tree
  xfs: remove subdirectories
  xfs: don't expect xfs headers to be in subdirectories

* git://git.infradead.org/users/cbou/battery-3.1:
  s3c-adc-battery: Fix compilation error due to missing header (module.h)
  max8997_charger: Needs module.h
  max8998_charger: Needs module.h

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon: Extended DDC Probing for Toshiba L300D Radeon Mobility X1100 HDMI-A Connector
  drm/ttm: ensure ttm for new node is bound before calling move_notify()
  drm/ttm: unbind ttm before destroying node in accel move cleanup
  drm/ttm: fix ttm_bo_add_ttm(user) failure path
  drm/radeon: Make vramlimit parameter actually work.
  drm/radeon: Explicitly print GTT/VRAM offsets on test failure.
  drm/radeon: Take IH ring into account for test size calculation.
  drm/radeon/alpha: Add Alpha support to Radeon DRM code

This reverts commit f3637a5f.

It turns out that this breaks several drivers, one example being OMAP
boards which use the on-board OMAP UARTs and the omap-serial driver that
will not boot to userspace after the commit.

Paul Walmsley reports that enabling CONFIG_DEBUG_SHIRQ reveals 'IRQ
handler type mismatch' errors:

  IRQ handler type mismatch for IRQ 74
  current handler: serial idle
  ...

and the reason is that setting IRQF_ONESHOT will now result in those
interrupt handlers having different IRQF flags, and thus being
unsharable.  So the commit log in the reverted commit:

                            "Since it is required for those users and
    there is no difference for others it makes sense to add this flag
    unconditionally."

is simply not true: there may not be any difference from a "actions at
irq time", but there is a *big* difference wrt this flag testing irq
management (see __setup_irq() in kernel/irq/manage.c).

One solution may be to stop verifying IRQF_ONESHOT in __setup_irq(), but
right now the safe course of action is to revert the change.  Let's
revisit this in a later merge window.
Reported-by: Paul Walmsley <paul@pwsan.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Requested-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Toshiba Satellite L300D with ATI Mobility Radeon X1100 sends data
   to i2c bus for a HDMI connector that is not implemented/existent
   on the notebook's board.

   Fix by applying extented DDC probing for this connector.

   Requires [PATCH] drm/radeon: Extended DDC Probing for Connectors
   with Improperly Wired DDC Lines

   Tested for kernel 2.6.38 on Toshiba Satellite L300D notebook

   BugLink: http://bugs.launchpad.net/bugs/826677Signed-off-by: Thomas Reim <reimth@gmail.com>
Acked-by: Chris Routh <routhy@gmail.com>
Cc: <stable@kernel.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

This was true for new TTM_PL_SYSTEM and new TTM_PL_TT cases, but wasn't
the case on TTM_PL_SYSTEM<->TTM_PL_TT moves, which causes trouble on some
paths as nouveau's move_notify() hook requires that the dma addresses be
valid at this point.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Nouveau makes the assumption that if a TTM is bound there will be a mm_node
around for it and the backwards ordering here resulted in a use-after-free
on some eviction paths.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

ttm_tt_destroy kfrees passed object, so we need to nullify
a reference to it.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: stable@kernel.org
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Jan Beulich reported a possible net_device leak in bridge code after
commit bb900b27 (bridge: allow creating bridge devices with netlink)
Reported-by: Jan Beulich <JBeulich@novell.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The code really requires the current source directory to be in the
header search path.  We already do this if building with an object
tree separate from the source, but it needs to be added manually
if building inside the source.  The cflags addition for it accidentally
got removed when collapsing the xfs directory structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Alex Elder <aelder@sgi.com>

Signed-off-by: Geoffrey Thomas <geofft@mit.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf tools: Add group event scheduling option to perf record/stat
  MAINTAINERS: Fix list of perf events source files
  perf tools: Fix build against newer glibc
  perf tools: Fix error handling of unknown events
  perf evlist: Fix missing event name init for default event
  perf list: Fix exit value

* 'stable/bug.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/tracing: Fix tracing config option properly
  xen: Do not enable PV IPIs when vector callback not present
  xen/x86: replace order-based range checking of M2P table by linear one
  xen: xen-selfballoon.c needs more header files

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem

Steven Rostedt says we should use CONFIG_EVENT_TRACING.

Cc:Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Fix regression for HVM case on older (<4.1.1) hypervisors caused by

  commit 99bbb3a8
  Author: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
  Date:   Thu Dec 2 17:55:10 2010 +0000

    xen: PV on HVM: support PV spinlocks and IPIs

This change replaced the SMP operations with event based handlers without
taking into account that this only works when the hypervisor supports
callback vectors. This causes unexplainable hangs early on boot for
HVM guests with more than one CPU.

BugLink: http://bugs.launchpad.net/bugs/791850

CC: stable@kernel.org
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Tested-and-Reported-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Otherwise these would need to be painstakingly calculated looking at the source
code.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Alpha needs to have available the system bus address for the Radeon's
local memory, so that it can be used in ttm_bo_vm_fault(), when building
the PTEs for accessing that VRAM.  So, we make bus.addr hold the ioremap()
return, and then we can modify bus.base appropriately for use during page
fault processing.
Signed-off-by: Jay Estabrook <jay.estabrook@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: core: handle ack_busy when fetching the Config ROM

This fixes a regression introduced by commit cdcb725c ("Btrfs: check
if there is enough space for balancing smarter").  We can't do 64-bit
divides on 32-bit architectures.

In cases where we need to divide/multiply by 2 we should just left/right
shift respectively, and in cases where theres N number of devices use
do_div.  Also make the counters u64 to match up with rw_devices.
Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Acked-and-tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: flush any pending end_io requests before DIO reads w/dioread_nolock
  ext4: fix nomblk_io_submit option so it correctly converts uninit blocks
  ext4: Resolve the hang of direct i/o read in handling EXT4_IO_END_UNWRITTEN.
  ext4: call ext4_ioend_wait and ext4_flush_completed_IO in ext4_evict_inode
  ext4: Fix ext4_should_writeback_data() for no-journal mode

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: sound/aoa/fabrics/layout.c: remove unneeded kfree
  ALSA: hda - Fix error check from snd_hda_get_conn_index() in patch_cirrus.c
  ALSA: hda - Don't spew too many ELD errors
  ALSA: usb-audio - Fix missing mixer dB information
  ALSA: hda - Add "PCM" volume to vmaster slave list
  ALSA: hda - Fix duplicated capture-volume creation for ALC268 models
  ALSA: ac97: Add HP Compaq dc5100 SFF(PT003AW) to Headphone Jack Sense whitelist
  ALSA: snd_usb_caiaq: track submitted output urbs

Fix new kernel-doc warning in pci.c:

  Warning(drivers/pci/pci.c:3259): No description found for parameter 'mps'
  Warning(drivers/pci/pci.c:3259): Excess function parameter 'rq' description in 'pcie_set_mps'
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If we can't push the pending register windows onto the user's stack,
we disallow signal delivery even if the signal would be delivered on a
valid seperate signal stack.

Add a register window save area in the signal frame, and store any
unsavable windows there.

On sigreturn, if any windows are still queued up in the signal frame,
try to push them back onto the stack and if that fails we kill the
process immediately.

This allows the debug/tst-longjmp_chk2 glibc test case to pass.
Signed-off-by: David S. Miller <davem@davemloft.net>

This oops have been already fixed with commit

    27141666

    atm: [br2684] Fix oops due to skb->dev being NULL

    It happens that if a packet arrives in a VC between the call to open it on
    the hardware and the call to change the backend to br2684, br2684_regvcc
    processes the packet and oopses dereferencing skb->dev because it is
    NULL before the call to br2684_push().

but have been introduced again with commit

    b6211ae7

    atm: Use SKB queue and list helpers instead of doing it by-hand.
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The label outnodev is only used when kzalloc has not yet taken place or has
failed, so there is no need for the call for kfree under this label.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier x;
expression E1!=0,E2,E3,E4;
statement S;
iterator I;
@@

(
if (...) { ... when != kfree(x)
               when != x = E3
               when != E3 = x
*  return ...;
 }
... when != x = E2
    when != I(...,x,...) S
if (...) { ... when != x = E4
 kfree(x); ... return ...; }
)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

snd_hda_get_conn_index() returns a negative value while the current code
stores it in an unsigned int.  It must be stored in a signed integer.
Reported-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Currently HD-audio driver shows the all error ELD byte as an error
in the kernel message.  This is annoying when the video driver doesn't
set the correct ELD from the beginning. e.g. radeon sends a zero-byte
data, but we still check ELD with the fixed 128 byte as a workaround
for some broken devices, it spews 128-times errors.

For avoiding this, the driver aborts reading when the first byte is
invalid.  In such a case, the whole data is certainly invalid.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/drm-intel:
  drm/i915: set GFX_MODE to pre-Ivybridge default value even on Ivybridge

There is a race between ext4 buffer write and direct_IO read with
dioread_nolock mount option enabled. The problem is that we clear
PageWriteback flag during end_io time but will do
uninitialized-to-initialized extent conversion later with dioread_nolock.
If an O_direct read request comes in during this period, ext4 will return
zero instead of the recently written data.

This patch checks whether there are any pending uninitialized-to-initialized
extent conversion requests before doing O_direct read to close the race.
Note that this is just a bandaid fix. The fundamental issue is that we
clear PageWriteback flag before we really complete an IO, which is
problem-prone. To fix the fundamental issue, we may need to implement an
extent tree cache that we can use to look up pending to-be-converted extents.
Signed-off-by: Jiaying Zhang <jiayingz@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org

Prior to Ivybridge, the GFX_MODE would default to 0x800, meaning that
MI_FLUSH would flush the TLBs in addition to the rest of the caches
indicated in the MI_FLUSH command.  However starting with Ivybridge, the
register defaults to 0x2800 out of reset, meaning that to invalidate the
TLB we need to use PIPE_CONTROL.  Since we're not doing that yet, go
back to the old default so things work.

v2: don't forget to actually *clear* the new bit
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>