- 07 Jun, 2021 2 commits
-
-
Vladimir Oltean authored
The sja1105 driver has an intermediate way of determining whether the RGMII delays should be applied by the PHY or by itself: by looking at the port role (PHY or MAC). The port can be put in the PHY role either explicitly (sja1105,role-phy) or implicitly (fixed-link). We want to deprecate the sja1105,role-phy property, so all that remains is the fixed-link property. Introduce a "fixed_link" array of booleans in the driver, and use that to determine whether RGMII delays must be applied or not. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
The "reverse RMII" protocol name is a personal invention, derived from "reverse MII". Just like MII, RMII is an asymmetric protocol in that a PHY behaves differently than a MAC. In the case of RMII, for example: - the 50 MHz clock signals are either driven by the MAC or by an external oscillator (but never by the PHY). - the PHY can transmit extra in-band control symbols via RXD[1:0] which the MAC is supposed to understand, but a PHY isn't. The "reverse MII" protocol is not standardized either, except for this web document: https://www.eetimes.com/reverse-media-independent-interface-revmii-block-architecture/# In short, it means that the Ethernet controller speaks the 4-bit data parallel protocol from the perspective of a PHY (it acts like a PHY). This might mean that it implements clause 22 compatible registers, although that is optional - the important bit is that its pins can be connected to an MII MAC and it will 'just work'. In this discussion thread: https://lore.kernel.org/netdev/20210201214515.cx6ivvme2tlquge2@skbuf/ we agreed that it would be an abuse of terms to use the "RevMII" name for anything than the 4-bit parallel MII protocol. But since all the same concepts can be applied to the 2-bit Reduced MII protocol as well, here we are introducing a "Reverse RMII" protocol. This means: "behave like an RMII PHY". Signed-off-by:
-
- 04 Jun, 2021 26 commits
-
-
George McCollister authored
Add an inbound policy filter which matches the HSR/PRP supervision MAC range and forwards to the CPU port without discarding duplicates. This is required to correctly populate time_in[A] and time_in[B] in the HSR/PRP node_table. Leave the policy disabled by default and enable/disable it when joining/leaving hsr. Signed-off-by:
George McCollister <george.mccollister@gmail.com> Reviewed-by:
Vladimir Oltean <olteanv@gmail.com> Signed-off-by:
-
Íñigo Huguet authored
In my last changes in commit 5e0b8928 I introduced a copy-paste bug, leading to cancel twice qresume_task work for OFLD queue, and never the one for CTRL queue. This patch cancels correctly both works. Signed-off-by:
Íñigo Huguet <ihuguet@redhat.com> Signed-off-by:
-
Horatiu Vultur authored
According to the standard IEC 62439-2, the number of transitions needs to be counted for each transition 'between' ring state open and ring state closed and not from open state to closed state. Therefore fix this for both ring and interconnect ring. Signed-off-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by:
-
Michael Walle authored
The supplied buffer for the MAC address might not be aligned. Thus doing a 32bit (or 16bit) access could be on an unaligned address. For now, enetc is only used on aarch64 which can do unaligned accesses, thus there is no error. In any case, be correct and use the get/put_unaligned helpers. Signed-off-by:
Michael Walle <michael@walle.cc> Reviewed-by:
Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by:
-
David S. Miller authored
Peng Li says: ==================== net: hdlc_x25: clean up some code style issues This patchset clean up some code style issues. ==================== Signed-off-by: -
Peng Li authored
Alignment should match open parenthesis. Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by:
-
Peng Li authored
According to the chackpatch.pl, else should follow close brace '}'. Signed-off-by:
-
Peng Li authored
Add spaces required around that '='. Add space required after that ','. Signed-off-by:
-
Peng Li authored
Should not use assignment in if condition. Signed-off-by:
-
Peng Li authored
This patch removes unnecessary out of memory message, to fix the following checkpatch.pl warning: "WARNING: Possible unnecessary 'out of memory' message" Signed-off-by:
-
Peng Li authored
This patch removes some redundant blank lines. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueDavid S. Miller authored
Tony Nguyen says: ==================== 1GbE Intel Wired LAN Driver Updates 2021-06-04 This series contains updates to igc driver only. Sasha utilizes the newly introduced ethtool_sprintf() function, removes unused defines, and fixes indentation. Muhammad adds support for hardware VLAN insertion and stripping. ==================== Signed-off-by: -
Zheng Yongjun authored
When kalloc or kmemdup failed, should return ENOMEM rather than ENOBUF. Signed-off-by:
Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by:
-
David S. Miller authored
Mat Martineau says: ==================== mptcp: Add timestamp support Enable the SO_TIMESTAMP and SO_TIMESTAMPING socket options for MPTCP sockets and add receive path cmsg support for timestamps. Patches 1, 2, and 5 expose existing sock and tcp helpers for timestamps (no new EXPORT_SYMBOLS()s). Patch 3 propagates timestamp options to subflows. Patch 4 cleans up MPTCP handling of SOL_SOCKET options. Patch 6 adds timestamp csmg data when receiving on sockets that have been configured for timestamps. Patch 7 adds self test coverage for timestamps. ==================== Signed-off-by: -
Florian Westphal authored
This extends the existing setsockopt test case to also check for cmsg timestamps. mptcp_connect will abort/fail if the setockopt was passed but the timestamp cmsg isn't present after successful recvmsg(). Acked-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
-
Florian Westphal authored
This adds support for SO_TIMESTAMP(NS). Timestamps are passed to userspace in the same way as for plain tcp sockets. Acked-by:
-
Florian Westphal authored
MPTCP is builtin, so no need to add EXPORT_SYMBOL()s. It will be used to support SO_TIMESTAMP(NS) ancillary messages in the mptcp receive path. Acked-by:
-
Florian Westphal authored
Move the pre-check to the function that handles all SOL_SOCKET values. At this point there is complete coverage for all values that were accepted by the pre-check. BUSYPOLL functions are accepted but will not have any functionality yet until its clear how the expected mptcp behaviour should look like. Acked-by:
-
Florian Westphal authored
This adds support for TIMESTAMP(NS) setsockopt. This doesn't make things work yet, because the mptcp receive path doesn't convert the skb timestamps to cmsgs for userspace consumption. receive path cmsg support is added ina followup patch. Acked-by:
-
Florian Westphal authored
Similar to previous patch: expose SO_TIMESTAMPING helper so we do not have to copy & paste this into the mptcp core. Acked-by:
-
Florian Westphal authored
This exports SO_TIMESTAMP_* function for re-use by MPTCP. Without this there is too much copy & paste needed to support this from mptcp setsockopt path. Acked-by:
-
Muhammad Husaini Zulkifli authored
Add HW VLAN acceleration protocol handling. In case of HW VLAN tagging, we need that protocol available in the ndo_start_xmit(), so that it will be stored in a new fields in the skb. HW offloading is set to OFF by default. Users are allow to turn on/off Rx/Tx HW VLAN acceleration via ethtool. Signed-off-by:
Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Tested-by:
Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Acked-by:
Sasha Neftin <sasha.neftin@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Sasha Neftin authored
Minor fix of indentation in igc_defines.h Signed-off-by:
-
Sasha Neftin authored
The MDICNFG register from igc registers is not used so remove it. Signed-off-by:
-
Sasha Neftin authored
The CR_1000T_ASYM_PAUSE bit from igc defines is not used so remove it. Signed-off-by:
-
Sasha Neftin authored
Complete to commit c8d4725e ("intel: Update drivers to use ethtool_sprintf") Update the igc driver to make use of ethtool_sprintf. The general idea is to reduce code size and overhead by replacing the repeated pattern of string printf statements and ETH_STRING_LEN counter increments. Suggested-by:
Alexander Duyck <alexanderduyck@fb.com> Signed-off-by:
-
- 03 Jun, 2021 12 commits
-
-
Colin Ian King authored
The comparison of len < 0 is always false because len is a size_t. Fix this by making len a ssize_t instead. Addresses-Coverity: ("Unsigned compared against 0") Fixes: d3953819 ("netdevsim: Add max_vfs to bus_dev") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Andreas Roeseler authored
Including <linux/in.h> and <netinet/in.h> in the dependencies breaks compilation of trinity due to multiple definitions. <linux/in.h> is only used in <linux/icmp.h> to provide the definition of the struct in_addr, but this can be substituted out by using the datatype __be32. Signed-off-by:
Andreas Roeseler <andreas.a.roeseler@gmail.com> Signed-off-by:
-
Nathan Chancellor authored
Clang warns that proto in rmnet_map_v5_checksum_uplink_packet() might be used uninitialized: drivers/net/ethernet/qualcomm/rmnet/rmnet_map_data.c:283:14: warning: variable 'proto' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] } else if (skb->protocol == htons(ETH_P_IPV6)) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/qualcomm/rmnet/rmnet_map_data.c:295:36: note: uninitialized use occurs here check = rmnet_map_get_csum_field(proto, trans); ^~~~~ drivers/net/ethernet/qualcomm/rmnet/rmnet_map_data.c:283:10: note: remove the 'if' if its condition is always true } else if (skb->protocol == htons(ETH_P_IPV6)) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/qualcomm/rmnet/rmnet_map_data.c:270:11: note: initialize the variable 'proto' to silence this warning u8 proto; ^ = '\0' 1 warning generated. This is technically a false positive because there is an if statement above this one that checks skb->protocol for not being either ETH_P_IP{,V6}. However, it is more obvious to sink that into the if statement as an else branch, which makes the code clearer and fixes the warning. At the same time, move the "IS_ENABLED(CONFIG_IPV6)" into the else if condition so that the else branch of the preprocessor conditional can be shared, since there is no build failure with CONFIG_IPV6 disabled. Fixes: b6e5d27e ("net: ethernet: rmnet: Add support for MAPv5 egress packets") Link: https://github.com/ClangBuiltLinux/linux/issues/1390Signed-off-by:Nathan Chancellor <nathan@kernel.org> Signed-off-by:
-
Nathan Chancellor authored
clang points out that ret in ks8851_read_selftest() is set but unused: drivers/net/ethernet/micrel/ks8851_common.c:1028:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] int ret = 0; ^ 1 warning generated. The return code of this function has never been checked so just remove ret and make the function return void. Fixes: 3ba81f3e ("net: Micrel KS8851 SPI network driver") Suggested-by:Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Yu Kuai authored
Add description for parameters of htb_add_to_id_tree() to fix gcc W=1 warnings: net/sched/sch_htb.c:282: warning: Function parameter or member 'root' not described in 'htb_add_to_id_tree' net/sched/sch_htb.c:282: warning: Function parameter or member 'cl' not described in 'htb_add_to_id_tree' net/sched/sch_htb.c:282: warning: Function parameter or member 'prio' not described in 'htb_add_to_id_tree' Signed-off-by:
Yu Kuai <yukuai3@huawei.com> Signed-off-by:
-
Colin Ian King authored
The variable ret is being initialized with a value that is never read, it is being updated later on. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: -
Russell King authored
Rather than open-coding the phy_modify_changed() sequence, use this helper in marvell_set_polarity(). Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by:
Marek Behún <kabel@kernel.org> Signed-off-by:
-
David S. Miller authored
Alex Elder says: ==================== net: ipa: support inline checksum offload Inline offload--required for checksum offload support on IPA version 4.5 and above--is now supported by the RMNet driver: https://lore.kernel.org/netdev/162259440606.2786.10278242816453240434.git-patchwork-notify@kernel.org/ Add support for it in the IPA driver, and revert the commit that disabled it pending acceptance of the RMNet code. ==================== Signed-off-by:
-
Alex Elder authored
This reverts commit c88c34fc. The RMNet driver now supports inline checksum offload. Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
-
Alex Elder authored
Starting with IPA v4.5, IP payload checksum offload is implemented differently. Prior to v4.5, the IPA hardware appends an rmnet_map_dl_csum_trailer structure to each packet if checksum offload is enabled in the download direction (modem->AP). In the upload direction (AP->modem) a rmnet_map_ul_csum_header structure is prepended before each sent packet. Starting with IPA v4.5, checksum offload is implemented using a single new rmnet_map_v5_csum_header structure which sits between the QMAP header and the packet data. The same header structure is used in both directions. The new header contains a header type (CSUM_OFFLOAD); a checksum flag; and a flag indicating whether any other headers follow this one. The checksum flag indicates whether the hardware should compute (and insert) the checksum on a sent packet. On a received packet the checksum flag indicates whether the hardware confirms the checksum value in the payload is correct. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== This series provides misc updates for mlx5 drivers. For more information please see tag log below. Please pull and let me know if there is any problem. mlx5-updates-2021-06-03 This series contains misc updates for mlx5 driver 1) Alaa disables advanced features when kdump mode to save on memory 2) Jakub counts all link flap events 3) Meir adds support for IPoIB NDR speed 4) Various misc cleanup ==================== Signed-off-by: -
Íñigo Huguet authored
Signed-off-by:
-
