Marvell's new SoC (65 nano) needs different settings for its SATA
PHY registers.
Tested-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Saeed Bishara <saeed@marvell.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

New device attach path in ata_eh_revalidate_and_attach() is divided
into two separate loops because ATA requires IDENTIFY to be issued to
slave first while the user expects to see device probe messages from
the master device.  new_mask is used to track which devices are the
new ones between the first loop and the second.

This usually works well but if an error occurs during configuration
stage, ata_dev_revalidate_and_attach() returns with error code and
forgets new_mask.  On the retry run, dev->class is set and new_mask
for the device is clear, so the device just gets revalidated and thus
ends up skipping post-configuration procedure including scheduling of
SCSI_HOTPLUG for the device.  When this occurs, ATA part of probing
works fine but SCSI probing usually doesn't happen and makes the
device unreachable.

The behavior has been around for a very long time but it has been
uncovered with the recent addition of 1_5_GBPS horkage which uses
-EAGAIN return value from ata_dev_configure() to restart the probing
sequence after forcing cable speed.

This can be fixed by making sure dev->class is permanently set only
after all configurations are successfully complete.  Fix it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Tim Connors <tconnors+linuxkml@astro.swin.edu.au>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
  Staging: comedi: David doesn't want to get comedi patches
  Staging: rtl8187se: Fix compilation warnings and procfs directory leak
  Staging: rt2870: new device id
  Staging: w35und: unregister device from the ieee80211 stack upon ->disconnect()

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  usb-serial: ftdi_sio: fix reference counting of ftdi_private
  USB: unusual_devs: extend nokia 6288 bcd range
  USB: Gadget: fix UTF conversion in the usbstring library
  USB: Fix makefile so that CONFIG_WDM and CONFIG_TMC work.
  USB: ftdi_sio: add vendor/product id for the Marvell SheevaPlug
  USB: cxacru: Fix negative dB output

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
  Revert driver core: move platform_data into platform_device
  Revert driver core: fix passing platform_data
  Remove old PRINTK_DEBUG config item
  Doc/sysfs-rules: Swap the order of the words so the sentence makes more sense
  Driver core: platform: fix kernel-doc warnings

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (22 commits)
  Fix the race between capifs remount and node creation
  Fix races around the access to ->s_options
  switch ufs directories to ufs_sync_file()
  Switch open_exec() and sys_uselib() to do_open_filp()
  Make open_exec() and sys_uselib() use may_open(), instead of duplicating its parts
  Reduce path_lookup() abuses
  Make checkpatch.pl shut up on fs/inode.c
  NULL noise in fs/super.c:kill_bdev_super()
  romfs: cleanup romfs_fs.h
  ROMFS: romfs_dev_read() error ignored
  fs: dcache fix LRU ordering
  ocfs2: Use nd_set_link().
  Fix deadlock in ipathfs ->get_sb()
  Fix a leak in failure exit in 9p ->get_sb()
  Convert obvious places to deactivate_locked_super()
  New helper: deactivate_locked_super()
  reiserfs: remove privroot hiding in lookup
  reiserfs: dont associate security.* with xattr files
  reiserfs: fixup xattr_root caching
  Always lookup priv_root on reiserfs mount and keep it
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes:
  GFS2: Fix glock ref counting bug

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Fix line-in on Mac Mini Core2 Duo
  ALSA: Release v1.0.20
  sound: via82xx: fix DXS volume range
  sound: serial-u16550: fix buffer overflow
  ASoC: Fix errors in WM8990

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6:
  V4L/DVB (11680): cafe_ccic: use = instead of == for setting a value at a var
  V4L/DVB (11679): cafe_ccic: fix sensor detection
  V4L/DVB (11675): ivtv/radio: fix V4L2_TUNER_MODE/V4L2_TUNER_SUB confusion
  V4L/DVB (11674): ivtv: fix incorrect bit tests
  V4L/DVB (11669): uvc: fix compile warning
  V4L/DVB (11668): ivtv: fix compiler warning.
  V4L/DVB (11664): cx23885: Frontend wasn't locking on HVR-1500
  V4L/DVB (11662): v4l2-ioctl: Clear buffer type specific trailing fields/padding
  V4L/DVB (11661): v4l2-ioctl: Check buffer types using g_fmt instead of try_fmt
  V4L/DVB (11660): zoran: fix bug when enumerating format -1
  V4L/DVB (11575): uvcvideo: fix uvc resume failed

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (26 commits)
  bonding: fix panic if initialization fails
  IXP4xx: complete Ethernet netdev setup before calling register_netdev().
  IXP4xx: use "ENODEV" instead of "ENOSYS" in module initialization.
  ipvs: Fix IPv4 FWMARK virtual services
  ipv4: Make INET_LRO a bool instead of tristate.
  net: remove stale reference to fastroute from Kconfig help text
  net: update skb_recycle_check() for hardware timestamping changes
  bnx2: Fix panic in bnx2_poll_work().
  net-sched: fix bfifo default limit
  igb: resolve panic on shutdown when SR-IOV is enabled
  wimax: oops: wimax_dev_add() is the only one that can initialize the state
  wimax: fix oops if netlink fails to add attribute
  Bluetooth: Move dev_set_name() to a context that can sleep
  netfilter: ctnetlink: fix wrong message type in user updates
  netfilter: xt_cluster: fix use of cluster match with 32 nodes
  netfilter: ip6t_ipv6header: fix match on packets ending with NEXTHDR_NONE
  netfilter: add missing linux/types.h include to xt_LED.h
  mac80211: pid, fix memory corruption
  mac80211: minstrel, fix memory corruption
  cfg80211: fix comment on regulatory hint processing
  ...

* fix/asoc:
  ASoC: Fix errors in WM8990

* fix/hda:
  ALSA: hda - Fix line-in on Mac Mini Core2 Duo

* topic/misc:
  ALSA: Release v1.0.20

* fix/misc:
  sound: via82xx: fix DXS volume range
  sound: serial-u16550: fix buffer overflow

/home/v4l/master/v4l/cafe_ccic.c: In function 'cafe_cam_init':
/home/v4l/master/v4l/cafe_ccic.c:778: warning: statement with no effect

Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: saeed bishara <saeed.bishara@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Due to an uninitialized chip.ident field the chip identification failed.

Thanks-to: Saeed Bishara <saeed.bishara@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L2_TUNER_MODE_ was used in a few places where V4L2_TUNER_SUB_ should have
been used.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Found the coccinelle tool.

Thanks-to: Julia Lawall <julia@diku.dk>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

The 2.6.30 kernel generates this warning:

uvc_driver.c:1729: warning: 'ret' may be used uninitialized in this function

I guess some new warning flag must have been turned on since this warning
didn't appear with older kernels (gcc version 4.3.1). It's also a bogus
warning, but since this code didn't comply to the coding standard anyway
I've modified it to 1) remove the warning and 2) conform to the coding
standard.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

The boards control struct wasn't updated when (presumably) all of the
other drivers migrated from using scode_table to specifying the demod.
Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Some ioctls have structs that are a different size depending on what type
of buffer is being used.  If the buffer type leaves a field unused or has
padding space at the end, this space should be zeroed out.

The problems with S_FMT and REQBUFS were original identified and patched by
Marton Nemeth <nm127@freemail.hu>.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

For a number of different ioctls, the v4l2-ioctl code checks that the
passed buffer type is supported by the driver.  It did this by checking
that the driver defined a method for the try_fmt handler for that buffer
type.  However, try_fmt is optional and a driver might not provide it even
though it does support that type.  So use g_fmt instead, since that isn't
optional.

This should fix a problem with VBI capture with saa7146.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

If someone requests a format at fmt->index == (unsigned)-1 and the first
format in the array doesn't have the requested type then num will still be
-1 when it's compared to fmt->index and there will appear to be a match.

Restructure the loop so this can't happen.  It's simpler this way too.  The
unnecessary check for (unsigned)fmt->index < 0 found by Roel Kluin
<roel.kluin@gmail.com> is removed this way too.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Now urb buffers is not freed before suspend, so uvc_alloc_urb_buffers should
return packet counts allocated originally during uvc resume, instead of zero.

This version uses round down to return packet counts on Linus' suggestions,
or else may lead to buffer destructed if packet size is changed before
calling uvc_alloc_urb_buffers() in this kind of case.
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

If module initialisation failed (e.g. because the bonding sysfs entry
cannot be created), kernel panics:
 IP: [<ffffffff8024910a>] destroy_workqueue+0x2d/0x146
Call Trace:
 [<ffffffff808268c4>] bond_destructor+0x28/0x78
 [<ffffffff80b64471>] netdev_run_todo+0x231/0x25a
 [<ffffffff80b6dbcd>] rtnl_unlock+0x9/0xb
 [<ffffffff81567907>] bonding_init+0x83e/0x84a

Remove the calls to bond_work_cancel_all() and destroy_workqueue();
both are also called/scheduled via bond_free_all().

bond_destroy_sysfs is unecessary because the sysfs entry has
not been created in the error case.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

we don't want to deal with half-updated config
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Put generic_show_options read access to s_options under rcu_read_lock,
split save_mount_options() into "we are setting it the first time"
(uses in foo_fill_super()) and "we are relacing and freeing the old one",
synchronize_rcu() before kfree() in the latter.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

... and make path_lookup_open() static
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

... use kern_path() where possible

[folded a fix from rdd]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Code Quality According To Mingo(tm) has been vastly improved,
no code has been damaged^Wchanged^Wdamaged.

[commit message rewritten -- AV]
Signed-off-by: Manish Katiyar <mkatiyar@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Subrata Modak <subrata@linux.vnet.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

There's no kernel-only content in it anymore, so move it to header-y
and remove the superflous #ifdef __KERNEL__.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

romfs_dev_read() may return -EIO, but ret is unsigned, so the errorpath
isn't taken.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Fix ordering of LRU when moving referenced dentries to the head of the list
(they should go to the head of the list in the same order as they were found
from the tail, rather than reverse order).
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

ocfs2 was hand-calling vfs_follow_link(), but there's no point to that.
Let's use page_follow_link_light() and nd_set_link().
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

forgot to unlock superblock before calling deactivate_super()...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>