- 12 Jul, 2022 2 commits
-
-
Ian Rogers authored
Metric names are truncated so don't try to match all of one. Allow AMX metrics to skip as floating point ones do. Metrics for optane memory can also skip rather than fail. Add a system wide check for uncore metrics. Restructure code to avoid extensive nesting. Some impetus for this in: https://lore.kernel.org/lkml/d32376b5-5538-ff00-6620-e74ad4b4abf2@huawei.com/Suggested-by: John Garry <john.garry@huawei.com> Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20220707153449.202409-2-irogers@google.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Ian Rogers authored
Printing out the metric name and architecture makes finding the source of a failure easier. Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20220707153449.202409-1-irogers@google.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
- 29 Jun, 2022 4 commits
-
-
Ian Rogers authored
Remove files and build rules. Remove test for comparing with jevents.py as there is no longer a binary to compare with. Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: John Garry <john.garry@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ananth Narayan <ananth.narayan@amd.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrew Kilroy <andrew.kilroy@arm.com> Cc: Caleb Biggers <caleb.biggers@intel.com> Cc: Felix Fietkau <nbd@nbd.name> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Kshipra Bopardikar <kshipra.bopardikar@intel.com> Cc: Like Xu <likexu@tencent.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nick Forrington <nick.forrington@arm.com> Cc: Paul Clarke <pc@us.ibm.com> Cc: Perry Taylor <perry.taylor@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Liu <liuqi115@huawei.com> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Sandipan Das <sandipan.das@amd.com> Cc: Santosh Shukla <santosh.shukla@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Will Deacon <will@kernel.org> Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com> Link: https://lore.kernel.org/r/20220629182505.406269-5-irogers@google.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Ian Rogers authored
Generate pmu-events.c using jevents.py rather than the binary built from jevents.c. Add a new config variable NO_JEVENTS that is set when there is no architecture json or an appropriate python interpreter isn't present. When NO_JEVENTS is defined the file pmu-events/empty-pmu-events.c is copied and used as the pmu-events.c file. Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: John Garry <john.garry@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ananth Narayan <ananth.narayan@amd.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrew Kilroy <andrew.kilroy@arm.com> Cc: Caleb Biggers <caleb.biggers@intel.com> Cc: Felix Fietkau <nbd@nbd.name> Cc: Ian Rogers <rogers.email@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Kshipra Bopardikar <kshipra.bopardikar@intel.com> Cc: Like Xu <likexu@tencent.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nick Forrington <nick.forrington@arm.com> Cc: Paul Clarke <pc@us.ibm.com> Cc: Perry Taylor <perry.taylor@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Liu <liuqi115@huawei.com> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Sandipan Das <sandipan.das@amd.com> Cc: Santosh Shukla <santosh.shukla@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Will Deacon <will@kernel.org> Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com> Link: https://lore.kernel.org/r/20220629182505.406269-4-irogers@google.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Ian Rogers authored
jevents.c is large, has a dependency on an old forked version of jsmn, and is challenging to work upon. A lot of jevents.c's complexity comes from needing to write json and csv parsing from first principles. In contrast python has this functionality in standard libraries and is already a build pre-requisite for tools like asciidoc (that builds all of the perf man pages). Introduce jevents.py that produces identical output to jevents.c. Add a test that runs both converter tools and validates there are no output differences. The test can be invoked with a phony build target like: $ make -C tools/perf jevents-py-test The python code deliberately tries to replicate the behavior of jevents.c so that the output matches and transitioning tools shouldn't introduce regressions. In some cases the code isn't as elegant as hoped, but fixing this can be done as follow up. Committer testing: $ make -C tools/perf jevents-py-test make: Entering directory '/var/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j32' parallel build HOSTCC fixdep.o HOSTLD fixdep-in.o LINK fixdep Auto-detecting system features: ... dwarf: [ on ] ... dwarf_getlocations: [ on ] ... glibc: [ on ] ... libbfd: [ on ] ... libbfd-buildid: [ on ] ... libcap: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... numa_num_possible_cpus: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libcrypto: [ OFF ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... zlib: [ on ] ... lzma: [ on ] ... get_cpuid: [ on ] ... bpf: [ on ] ... libaio: [ on ] ... libzstd: [ on ] ... disassembler-four-args: [ on ] HOSTCC pmu-events/json.o HOSTCC pmu-events/jsmn.o HOSTCC pmu-events/jevents.o HOSTLD pmu-events/jevents-in.o LINK pmu-events/jevents Checking architecture: arm64 Generating using jevents.c Generating using jevents.py Diffing Checking architecture: nds32 Generating using jevents.c Generating using jevents.py Diffing Checking architecture: powerpc Generating using jevents.c Generating using jevents.py Diffing Checking architecture: s390 Generating using jevents.c Generating using jevents.py Diffing Checking architecture: x86 Generating using jevents.c Generating using jevents.py Diffing make: Leaving directory '/var/home/acme/git/perf/tools/perf' $ Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: John Garry <john.garry@huawei.com> Tested-by: Thomas Richter <tmricht@linux.ibm.com> Tested-by: Xing Zhengjun <zhengjun.xing@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ananth Narayan <ananth.narayan@amd.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrew Kilroy <andrew.kilroy@arm.com> Cc: Caleb Biggers <caleb.biggers@intel.com> Cc: Felix Fietkau <nbd@nbd.name> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Kshipra Bopardikar <kshipra.bopardikar@intel.com> Cc: Like Xu <likexu@tencent.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nick Forrington <nick.forrington@arm.com> Cc: Paul Clarke <pc@us.ibm.com> Cc: Perry Taylor <perry.taylor@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Liu <liuqi115@huawei.com> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Sandipan Das <sandipan.das@amd.com> Cc: Santosh Shukla <santosh.shukla@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20220629182505.406269-3-irogers@google.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Ian Rogers authored
The PYTHON_AUTO code orders the preference for the PYTHON command to be python3, python and then python2. python3 makes a more logical preference as python2 is no longer supported: https://www.python.org/doc/sunset-python-2/ Reorder the priority of the PYTHON command to be python2, python and then python3. Reported-by: John Garry <john.garry@huawei.com> Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: John Garry <john.garry@huawei.com> Tested-by: Thomas Richter <tmricht@linux.ibm.com> Tested-by: Xing Zhengjun <zhengjun.xing@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ananth Narayan <ananth.narayan@amd.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrew Kilroy <andrew.kilroy@arm.com> Cc: Caleb Biggers <caleb.biggers@intel.com> Cc: Felix Fietkau <nbd@nbd.name> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Kshipra Bopardikar <kshipra.bopardikar@intel.com> Cc: Like Xu <likexu@tencent.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nick Forrington <nick.forrington@arm.com> Cc: Paul Clarke <pc@us.ibm.com> Cc: Perry Taylor <perry.taylor@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Liu <liuqi115@huawei.com> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Sandipan Das <sandipan.das@amd.com> Cc: Santosh Shukla <santosh.shukla@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20220629182505.406269-2-irogers@google.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
- 24 Jun, 2022 7 commits
-
-
Ravi Bangoria authored
Interpret Additional set of IBS register bits while doing perf report/script raw dump. IBS op PMU ex: $ sudo ./perf record -c 130 -a -e ibs_op/l3missonly=1/ --raw-samples $ sudo ./perf report -D ... ibs_op_ctl: 0000004500070008 MaxCnt 128 L3MissOnly 1 En 1 Val 1 CntCtl 0=cycles CurCnt 69 ibs_op_data: 0000000000710002 CompToRetCtr 2 TagToRetCtr 113 BrnRet 0 RipInvalid 0 BrnFuse 0 Microcode 0 ibs_op_data2: 0000000000000002 CacheHitSt 0=M-state RmtNode 0 DataSrc 2=A peer cache in a near CCX ibs_op_data3: 000000681d1700a1 LdOp 1 StOp 0 DcL1TlbMiss 0 DcL2TlbMiss 0 DcL1TlbHit2M 0 DcL1TlbHit1G 1 DcL2TlbHit2M 0 DcMiss 1 DcMisAcc 0 DcWcMemAcc 0 DcUcMemAcc 0 DcLockedOp 0 DcMissNoMabAlloc 1 DcLinAddrValid 1 DcPhyAddrValid 1 DcL2TlbHit1G 0 L2Miss 1 SwPf 0 OpMemWidth 8 bytes OpDcMissOpenMemReqs 7 DcMissLat 104 TlbRefillLat 0 IBS Fetch PMU ex: $ sudo ./perf record -c 130 -a -e ibs_fetch/l3missonly=1/ --raw-samples $ sudo ./perf report -D ... ibs_fetch_ctl: 3c1f00c700080008 MaxCnt 128 Cnt 128 Lat 199 En 1 Val 1 Comp 1 IcMiss 1 PhyAddrValid 1 L1TlbPgSz 4KB L1TlbMiss 0 L2TlbMiss 0 RandEn 0 L2Miss 1 L3MissOnly 1 FetchOcMiss 1 FetchL3Miss 1 With the DataSrc extensions, the source of data can be decoded among: - Local L3 or other L1/L2 in CCX. - A peer cache in a near CCX. - Data returned from DRAM. - A peer cache in a far CCX. - DRAM address map with "long latency" bit set. - Data returned from MMIO/Config/PCI/APIC. - Extension Memory (S-Link, GenZ, etc - identified by the CS target and/or address map at DF's choice). - Peer Agent Memory. Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Ananth Narayan <ananth.narayan@amd.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Richter <rrichter@amd.com> Cc: Sandipan Das <sandipan.das@amd.com> Cc: Santosh Shukla <santosh.shukla@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: like.xu.linux@gmail.com Cc: x86@kernel.org Link: https://lore.kernel.org/r/20220604044519.594-9-ravi.bangoria@amd.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Ravi Bangoria authored
IBS support has been enhanced with two new features in upcoming uarch: 1. DataSrc extension 2. L3 miss filtering. Additional set of bits has been introduced in IBS registers to exploit these features. New bits are already defining in arch/x86/ header. Sync it with tools header file. Also rename existing ibs_op_data field 'data_src' to 'data_src_lo'. Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Ananth Narayan <ananth.narayan@amd.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Richter <rrichter@amd.com> Cc: Sandipan Das <sandipan.das@amd.com> Cc: Santosh Shukla <santosh.shukla@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: like.xu.linux@gmail.com Cc: x86@kernel.org Link: https://lore.kernel.org/r/20220604044519.594-8-ravi.bangoria@amd.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Ravi Bangoria authored
PMUs advertise their capabilities via sysfs attribute files but the perf tool currently parses only core(CPU) or hybrid core PMU capabilities. Add support of recording non-core PMU capabilities int perf.data header. Note that a newly proposed HEADER_PMU_CAPS is replacing existing HEADER_HYBRID_CPU_PMU_CAPS. Special care is taken for hybrid core PMUs by writing their capabilities first in the perf.data header to make sure new perf.data file being read by old perf tool does not break. Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Ananth Narayan <ananth.narayan@amd.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Richter <rrichter@amd.com> Cc: Sandipan Das <sandipan.das@amd.com> Cc: Santosh Shukla <santosh.shukla@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: like.xu.linux@gmail.com Cc: x86@kernel.org Link: https://lore.kernel.org/r/20220604044519.594-6-ravi.bangoria@amd.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Ravi Bangoria authored
Currently all capabilities are stored in a single string separated by NULL character. Instead, store them in an array which makes searching of capability easier. Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Ananth Narayan <ananth.narayan@amd.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Richter <rrichter@amd.com> Cc: Sandipan Das <sandipan.das@amd.com> Cc: Santosh Shukla <santosh.shukla@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: like.xu.linux@gmail.com Cc: x86@kernel.org Link: https://lore.kernel.org/r/20220604044519.594-5-ravi.bangoria@amd.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Ravi Bangoria authored
Avoid unnecessary conditional code to check if pmu name is NULL or not by passing "cpu" pmu name to the printing function. Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Ananth Narayan <ananth.narayan@amd.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Richter <rrichter@amd.com> Cc: Sandipan Das <sandipan.das@amd.com> Cc: Santosh Shukla <santosh.shukla@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: like.xu.linux@gmail.com Cc: x86@kernel.org Link: https://lore.kernel.org/r/20220604044519.594-4-ravi.bangoria@amd.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Ravi Bangoria authored
In addition to returning nr_caps, cache it locally in struct perf_pmu. Similarly, cache status of whether caps sysfs has already been parsed or not. These will help to avoid parsing sysfs every time the function gets called. Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Ananth Narayan <ananth.narayan@amd.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Richter <rrichter@amd.com> Cc: Sandipan Das <sandipan.das@amd.com> Cc: Santosh Shukla <santosh.shukla@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: like.xu.linux@gmail.com Cc: x86@kernel.org Link: https://lore.kernel.org/r/20220604044519.594-3-ravi.bangoria@amd.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Ravi Bangoria authored
Samples without an L3 miss are discarded and counter is reset with random value (between 1-15 for fetch PMU and 1-127 for op PMU) when IBS L3 miss filtering is enabled. This causes a sampling period skew but there is no way to reconstruct aggregated sampling period. So print a warning at perf record if user sets l3missonly=1. Ex: # perf record -c 10000 -C 0 -e ibs_op/l3missonly=1/ WARNING: Hw internally resets sampling period when L3 Miss Filtering is enabled and tagged operation does not cause L3 Miss. This causes sampling period skew. Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com> Acked-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Ananth Narayan <ananth.narayan@amd.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Richter <rrichter@amd.com> Cc: Sandipan Das <sandipan.das@amd.com> Cc: Santosh Shukla <santosh.shukla@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: like.xu.linux@gmail.com Cc: x86@kernel.org Link: http://lore.kernel.org/lkml/20220604044519.594-2-ravi.bangoria@amd.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
- 23 Jun, 2022 18 commits
-
-
Adrian Hunter authored
When the -D option is used, the details of thread-map, cpu-map and event-update events are not currently dumped. Add prints so that they are. Example: # perf record --kcore sleep 0.1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.021 MB perf.data (7 samples) ] # perf script -D | grep 'THREAD\|CPU' 0 0x4950 [0x28]: PERF_RECORD_THREAD_MAP nr: 1 thread: 35116 0 0x4978 [0x20]: PERF_RECORD_CPU_MAP: 0-7 # perf script -D | grep -A4 'UPDATE' 0 0x4920 [0x30]: PERF_RECORD_EVENT_UPDATE ... id: 147 ... 0-7 Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20220610113316.6682-6-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Adrian Hunter authored
In preparation for recording sideband events in a virtual machine guest so that they can be injected into a host perf.data file. This is needed to enable injecting events after the initial synthesized user events (that have an all zero id sample) but before regular events. Committer notes: Add entry about PERF_RECORD_FINISHED_INIT to tools/perf/Documentation/perf.data-file-format.txt. Committer testing: Before: # perf report -D | grep FINISHED 0 0x5910 [0x8]: PERF_RECORD_FINISHED_ROUND FINISHED_ROUND events: 1 ( 0.5%) # After: # perf record -- sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.020 MB perf.data (7 samples) ] # perf report -D | grep FINISHED 0 0x5068 [0x8]: PERF_RECORD_FINISHED_INIT: unhandled! 0 0x5390 [0x8]: PERF_RECORD_FINISHED_ROUND FINISHED_ROUND events: 1 ( 0.5%) FINISHED_INIT events: 1 ( 0.5%) # Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20220610113316.6682-5-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Adrian Hunter authored
In preparation for recording sideband events in a virtual machine guest so that they can be injected into a host perf.data file. Add an option to always include sample type PERF_SAMPLE_IDENTIFIER. Committer testing: # perf record sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.020 MB perf.data (7 samples) ] # perf evlist -v cycles: size: 128, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1 # # # perf record --sample-identifier sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.022 MB perf.data (7 samples) ] # perf evlist -v cycles: size: 128, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1 # Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20220615052511.4441-1-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Adrian Hunter authored
In preparation for recording sideband events in a virtual machine guest so that they can be injected into a host perf.data file. Adjust the logic so that if there are IDs then the id index is recorded. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20220610113316.6682-3-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Adrian Hunter authored
kcore provides a copy of the running kernel including any modified code. A trace that benefits from that also benefits from text_poke events, so enable them. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20220610113316.6682-2-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Shawn M. Chapla authored
When CPU has been explicitly sampled (via --sample-cpu), prefer this sampled value over the thread CPU value when exporting to JSON. Signed-off-by: Shawn M. Chapla <schapla@codeweavers.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220526201506.2028281-1-schapla@codeweavers.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Including fixes from bpf and netfilter. Current release - regressions: - netfilter: cttimeout: fix slab-out-of-bounds read in cttimeout_net_exit Current release - new code bugs: - bpf: ftrace: keep address offset in ftrace_lookup_symbols - bpf: force cookies array to follow symbols sorting Previous releases - regressions: - ipv4: ping: fix bind address validity check - tipc: fix use-after-free read in tipc_named_reinit - eth: veth: add updating of trans_start Previous releases - always broken: - sock: redo the psock vs ULP protection check - netfilter: nf_dup_netdev: fix skb_under_panic - bpf: fix request_sock leak in sk lookup helpers - eth: igb: fix a use-after-free issue in igb_clean_tx_ring - eth: ice: prohibit improper channel config for DCB - eth: at803x: fix null pointer dereference on AR9331 phy - eth: virtio_net: fix xdp_rxq_info bug after suspend/resume Misc: - eth: hinic: replace memcpy() with direct assignment" * tag 'net-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits) net: openvswitch: fix parsing of nw_proto for IPv6 fragments sock: redo the psock vs ULP protection check Revert "net/tls: fix tls_sk_proto_close executed repeatedly" virtio_net: fix xdp_rxq_info bug after suspend/resume igb: Make DMA faster when CPU is active on the PCIe link net: dsa: qca8k: reduce mgmt ethernet timeout net: dsa: qca8k: reset cpu port on MTU change MAINTAINERS: Add a maintainer for OCP Time Card hinic: Replace memcpy() with direct assignment Revert "drivers/net/ethernet/neterion/vxge: Fix a use-after-free bug in vxge-main.c" net: phy: smsc: Disable Energy Detect Power-Down in interrupt mode ice: ethtool: Prohibit improper channel config for DCB ice: ethtool: advertise 1000M speeds properly ice: Fix switchdev rules book keeping ice: ignore protocol field in GTP offload netfilter: nf_dup_netdev: add and use recursion counter netfilter: nf_dup_netdev: do not push mac header a second time selftests: netfilter: correct PKTGEN_SCRIPT_PATHS in nft_concat_range.sh net/tls: fix tls_sk_proto_close executed repeatedly erspan: do not assume transport header is always set ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull MMC fixes from Ulf Hansson: - mtk-sd: Fix dma hang issues - sdhci-pci-o2micro: Fix card detect by dealing with debouncing * tag 'mmc-v5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: mediatek: wait dma stop bit reset to 0 mmc: sdhci-pci-o2micro: Fix card detect by dealing with debouncing
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "All small changes, mostly device-specific: - A regression fix for PCM WC-page allocation on x86 - A regression fix for i915 audio component binding - Fixes for (longstanding) beep handling bug - Runtime PM fixes for Intel LPE HDMI audio - A couple of pending FireWire fixes - Usual HD-audio and USB-audio quirks, new Intel dspconf entries" * tag 'sound-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek: Add quirk for Clevo NS50PU ALSA: hda: Fix discovery of i915 graphics PCI device ALSA: hda/via: Fix missing beep setup ALSA: hda/conexant: Fix missing beep setup ALSA: memalloc: Drop x86-specific hack for WC allocations ALSA: hda/realtek: Add quirk for Clevo PD70PNT ALSA: x86: intel_hdmi_audio: use pm_runtime_resume_and_get() ALSA: x86: intel_hdmi_audio: enable pm_runtime and set autosuspend delay ALSA: hda: intel-nhlt: remove use of __func__ in dev_dbg ALSA: hda: intel-dspcfg: use SOF for UpExtreme and UpExtreme11 boards firewire: convert sysfs sprintf/snprintf family to sysfs_emit firewire: cdev: fix potential leak of kernel stack due to uninitialized value ALSA: hda/realtek: Apply fixup for Lenovo Yoga Duet 7 properly ALSA: hda/realtek - ALC897 headset MIC no sound ALSA: usb-audio: US16x08: Move overflow check before array access ALSA: hda/realtek: Add mute LED quirk for HP Omen laptop
-
Rosemarie O'Riorden authored
When a packet enters the OVS datapath and does not match any existing flows installed in the kernel flow cache, the packet will be sent to userspace to be parsed, and a new flow will be created. The kernel and OVS rely on each other to parse packet fields in the same way so that packets will be handled properly. As per the design document linked below, OVS expects all later IPv6 fragments to have nw_proto=44 in the flow key, so they can be correctly matched on OpenFlow rules. OpenFlow controllers create pipelines based on this design. This behavior was changed by the commit in the Fixes tag so that nw_proto equals the next_header field of the last extension header. However, there is no counterpart for this change in OVS userspace, meaning that this field is parsed differently between OVS and the kernel. This is a problem because OVS creates actions based on what is parsed in userspace, but the kernel-provided flow key is used as a match criteria, as described in Documentation/networking/openvswitch.rst. This leads to issues such as packets incorrectly matching on a flow and thus the wrong list of actions being applied to the packet. Such changes in packet parsing cannot be implemented without breaking the userspace. The offending commit is partially reverted to restore the expected behavior. The change technically made sense and there is a good reason that it was implemented, but it does not comply with the original design of OVS. If in the future someone wants to implement such a change, then it must be user-configurable and disabled by default to preserve backwards compatibility with existing OVS versions. Cc: stable@vger.kernel.org Fixes: fa642f08 ("openvswitch: Derive IP protocol number for IPv6 later frags") Link: https://docs.openvswitch.org/en/latest/topics/design/#fragmentsSigned-off-by: Rosemarie O'Riorden <roriorden@redhat.com> Acked-by: Eelco Chaudron <echaudro@redhat.com> Link: https://lore.kernel.org/r/20220621204845.9721-1-roriorden@redhat.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
Jakub Kicinski authored
Commit 8a59f9d1 ("sock: Introduce sk->sk_prot->psock_update_sk_prot()") has moved the inet_csk_has_ulp(sk) check from sk_psock_init() to the new tcp_bpf_update_proto() function. I'm guessing that this was done to allow creating psocks for non-inet sockets. Unfortunately the destruction path for psock includes the ULP unwind, so we need to fail the sk_psock_init() itself. Otherwise if ULP is already present we'll notice that later, and call tcp_update_ulp() with the sk_proto of the ULP itself, which will most likely result in the ULP looping its callbacks. Fixes: 8a59f9d1 ("sock: Introduce sk->sk_prot->psock_update_sk_prot()") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Tested-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/r/20220620191353.1184629-2-kuba@kernel.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
Jakub Kicinski authored
This reverts commit 69135c57. This commit was just papering over the issue, ULP should not get ->update() called with its own sk_prot. Each ULP would need to add this check. Fixes: 69135c57 ("net/tls: fix tls_sk_proto_close executed repeatedly") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/r/20220620191353.1184629-1-kuba@kernel.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
Stephan Gerhold authored
The following sequence currently causes a driver bug warning when using virtio_net: # ip link set eth0 up # echo mem > /sys/power/state (or e.g. # rtcwake -s 10 -m mem) <resume> # ip link set eth0 down Missing register, driver bug WARNING: CPU: 0 PID: 375 at net/core/xdp.c:138 xdp_rxq_info_unreg+0x58/0x60 Call trace: xdp_rxq_info_unreg+0x58/0x60 virtnet_close+0x58/0xac __dev_close_many+0xac/0x140 __dev_change_flags+0xd8/0x210 dev_change_flags+0x24/0x64 do_setlink+0x230/0xdd0 ... This happens because virtnet_freeze() frees the receive_queue completely (including struct xdp_rxq_info) but does not call xdp_rxq_info_unreg(). Similarly, virtnet_restore() sets up the receive_queue again but does not call xdp_rxq_info_reg(). Actually, parts of virtnet_freeze_down() and virtnet_restore_up() are almost identical to virtnet_close() and virtnet_open(): only the calls to xdp_rxq_info_(un)reg() are missing. This means that we can fix this easily and avoid such problems in the future by just calling virtnet_close()/open() from the freeze/restore handlers. Aside from adding the missing xdp_rxq_info calls the only difference is that the refill work is only cancelled if netif_running(). However, this should not make any functional difference since the refill work should only be active if the network interface is actually up. Fixes: 754b8a21 ("virtio_net: setup xdp_rxq_info") Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20220621114845.3650258-1-stephan.gerhold@kernkonzept.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-06-21 This series contains updates to ice driver only. Marcin fixes GTP filters by allowing ignoring of the inner ethertype field. Wojciech adds VSI handle tracking in order to properly distinguish similar filters for removal. Anatolii removes ability to set 1000baseT and 1000baseX fields concurrently which caused link issues. He also disallows setting channels to less than the number of Traffic Classes which would cause NULL pointer dereference. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: ethtool: Prohibit improper channel config for DCB ice: ethtool: advertise 1000M speeds properly ice: Fix switchdev rules book keeping ice: ignore protocol field in GTP offload ==================== Link: https://lore.kernel.org/r/20220621224756.631765-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Kai-Heng Feng authored
Intel I210 on some Intel Alder Lake platforms can only achieve ~750Mbps Tx speed via iperf. The RR2DCDELAY shows around 0x2xxx DMA delay, which will be significantly lower when 1) ASPM is disabled or 2) SoC package c-state stays above PC3. When the RR2DCDELAY is around 0x1xxx the Tx speed can reach to ~950Mbps. According to the I210 datasheet "8.26.1 PCIe Misc. Register - PCIEMISC", "DMA Idle Indication" doesn't seem to tie to DMA coalesce anymore, so set it to 1b for "DMA is considered idle when there is no Rx or Tx AND when there are no TLPs indicating that CPU is active detected on the PCIe link (such as the host executes CSR or Configuration register read or write operation)" and performing Tx should also fall under "active CPU on PCIe link" case. In addition to that, commit b6e0c419 ("igb: Move DMA Coalescing init code to separate function.") seems to wrongly changed from enabling E1000_PCIEMISC_LX_DECISION to disabling it, also fix that. Fixes: b6e0c419 ("igb: Move DMA Coalescing init code to separate function.") Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220621221056.604304-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Christian Marangi authored
The current mgmt ethernet timeout is set to 100ms. This value is too big and would slow down any mdio command in case the mgmt ethernet packet have some problems on the receiving part. Reduce it to just 5ms to handle case when some operation are done on the master port that would cause the mgmt ethernet to not work temporarily. Fixes: 5950c7c0 ("net: dsa: qca8k: add support for mgmt read/write in Ethernet packet") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Link: https://lore.kernel.org/r/20220621151633.11741-1-ansuelsmth@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Christian Marangi authored
It was discovered that the Documentation lacks of a fundamental detail on how to correctly change the MAX_FRAME_SIZE of the switch. In fact if the MAX_FRAME_SIZE is changed while the cpu port is on, the switch panics and cease to send any packet. This cause the mgmt ethernet system to not receive any packet (the slow fallback still works) and makes the device not reachable. To recover from this a switch reset is required. To correctly handle this, turn off the cpu ports before changing the MAX_FRAME_SIZE and turn on again after the value is applied. Fixes: f58d2598 ("net: dsa: qca8k: implement the port MTU callbacks") Cc: stable@vger.kernel.org Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Link: https://lore.kernel.org/r/20220621151122.10220-1-ansuelsmth@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Vadim Fedorenko authored
I've been contributing and reviewing patches for ptp_ocp driver for some time and I'm taking care of it's github mirror. On Jakub's suggestion, I would like to step forward and become a maintainer for this driver. This patch adds a dedicated entry to MAINTAINERS. Signed-off-by: Vadim Fedorenko <vadfed@fb.com> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Link: https://lore.kernel.org/r/20220621233131.21240-1-vfedorenko@novek.ruSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 22 Jun, 2022 7 commits
-
-
Linus Torvalds authored
Merge tag 'linux-kselftest-fixes-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fixes from Shuah Khan: "Compile time fixes and run-time resources leaks: - Fix clang cross compilation - Fix resource leak when return error - fix compile error for dma_map_benchmark - Fix regression - make use of GUP_TEST_FILE macro" * tag 'linux-kselftest-fixes-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: make use of GUP_TEST_FILE macro selftests: vm: Fix resource leak when return error selftests dma: fix compile error for dma_map_benchmark selftests: Fix clang cross compilation
-
Kees Cook authored
Under CONFIG_FORTIFY_SOURCE=y and CONFIG_UBSAN_BOUNDS=y, Clang is bugged here for calculating the size of the destination buffer (0x10 instead of 0x14). This copy is a fixed size (sizeof(struct fw_section_info_st)), with the source and dest being struct fw_section_info_st, so the memcpy should be safe, assuming the index is within bounds, which is UBSAN_BOUNDS's responsibility to figure out. Avoid the whole thing and just do a direct assignment. This results in no change to the executable code. [This is a duplicate of commit 2c0ab32b ("hinic: Replace memcpy() with direct assignment") which was applied to net-next.] Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Tom Rix <trix@redhat.com> Cc: llvm@lists.linux.dev Link: https://github.com/ClangBuiltLinux/linux/issues/1592Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> # build Link: https://lore.kernel.org/r/20220616052312.292861-1-keescook@chromium.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Tim Crawford authored
Fixes headset detection on Clevo NS50PU. Signed-off-by: Tim Crawford <tcrawford@system76.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220622150017.9897-1-tcrawford@system76.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
https://github.com/martinetd/linuxLinus Torvalds authored
Pull 9pfs fixes from Dominique Martinet: "A couple of fid refcount and fscache fixes: - fid refcounting was incorrect in some corner cases and would leak resources, only freed at umount time. The first three commits fix three such cases - 'cache=loose' or fscache was broken when trying to write a partial page to a file with no read permission since the rework a few releases ago. The fix taken here is just to restore old behavior of using the special 'writeback_fid' for such reads, which is open as root/RDWR and such not get complains that we try to read on a WRONLY fid. Long-term it'd be nice to get rid of this and not issue the read at all (skip cache?) in such cases, but that direction hasn't progressed" * tag '9p-for-5.19-rc4' of https://github.com/martinetd/linux: 9p: fix EBADF errors in cached mode 9p: Fix refcounting during full path walks for fid lookups 9p: fix fid refcount leak in v9fs_vfs_get_link 9p: fix fid refcount leak in v9fs_vfs_atomic_open_dotl
-
Jakub Kicinski authored
This reverts commit 8fc74d18. BAR0 is the main (only?) register bank for this device. We most obviously can't unmap it before the netdev is unregistered. This was pointed out in review but the patch got reposted and merged, anyway. The author of the patch was only testing it with a QEMU model, which I presume does not emulate enough for the netdev to be brought up (author's replies are not visible in lore because they kept sending their emails in HTML). Link: https://lore.kernel.org/all/20220616085059.680dc215@kernel.org/ Fixes: 8fc74d18 ("drivers/net/ethernet/neterion/vxge: Fix a use-after-free bug in vxge-main.c") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfJakub Kicinski authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net 1) Use get_random_u32() instead of prandom_u32_state() in nft_meta and nft_numgen, from Florian Westphal. 2) Incorrect list head in nfnetlink_cttimeout in recent update coming from previous development cycle. Also from Florian. 3) Incorrect path to pktgen scripts for nft_concat_range.sh selftest. From Jie2x Zhou. 4) Two fixes for the for nft_fwd and nft_dup egress support, from Florian. * git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_dup_netdev: add and use recursion counter netfilter: nf_dup_netdev: do not push mac header a second time selftests: netfilter: correct PKTGEN_SCRIPT_PATHS in nft_concat_range.sh netfilter: cttimeout: fix slab-out-of-bounds read typo in cttimeout_net_exit netfilter: use get_random_u32 instead of prandom ==================== Link: https://lore.kernel.org/r/20220621085618.3975-1-pablo@netfilter.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Lukas Wunner authored
Simon reports that if two LAN9514 USB adapters are directly connected without an intermediate switch, the link fails to come up and link LEDs remain dark. The issue was introduced by commit 1ce8b372 ("usbnet: smsc95xx: Forward PHY interrupts to PHY driver to avoid polling"). The PHY suffers from a known erratum wherein link detection becomes unreliable if Energy Detect Power-Down is used. In poll mode, the driver works around the erratum by briefly disabling EDPD for 640 msec to detect a neighbor, then re-enabling it to save power. In interrupt mode, no interrupt is signaled if EDPD is used by both link partners, so it must not be enabled at all. We'll recoup the power savings by enabling SUSPEND1 mode on affected LAN95xx chips in a forthcoming commit. Fixes: 1ce8b372 ("usbnet: smsc95xx: Forward PHY interrupts to PHY driver to avoid polling") Reported-by: Simon Han <z.han@kunbus.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Link: https://lore.kernel.org/r/439a3f3168c2f9d44b5fd9bb8d2b551711316be6.1655714438.git.lukas@wunner.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 21 Jun, 2022 2 commits
-
-
Anatolii Gerasymenko authored
Do not allow setting less channels, than Traffic Classes there are via ethtool. There must be at least one channel per Traffic Class. If you set less channels, than Traffic Classes there are, then during ice_vsi_rebuild there would be allocated only the requested amount of tx/rx rings in ice_vsi_alloc_arrays. But later in ice_vsi_setup_q_map there would be requested at least one channel per Traffic Class. This results in setting num_rxq > alloc_rxq and num_txq > alloc_txq. Later, there would be a NULL pointer dereference in ice_vsi_map_rings_to_vectors, because we go beyond of rx_rings or tx_rings arrays. Change ice_set_channels() to return error if you try to allocate less channels, than Traffic Classes there are. Change ice_vsi_setup_q_map() and ice_vsi_setup_q_map_mqprio() to return status code instead of void. Add error handling for ice_vsi_setup_q_map() and ice_vsi_setup_q_map_mqprio() in ice_vsi_init() and ice_vsi_cfg_tc(). [53753.889983] INFO: Flow control is disabled for this traffic class (0) on this vsi. [53763.984862] BUG: unable to handle kernel NULL pointer dereference at 0000000000000028 [53763.992915] PGD 14b45f5067 P4D 0 [53763.996444] Oops: 0002 [#1] SMP NOPTI [53764.000312] CPU: 12 PID: 30661 Comm: ethtool Kdump: loaded Tainted: GOE --------- - - 4.18.0-240.el8.x86_64 #1 [53764.011825] Hardware name: Intel Corporation WilsonCity/WilsonCity, BIOS WLYDCRB1.SYS.0020.P21.2012150710 12/15/2020 [53764.022584] RIP: 0010:ice_vsi_map_rings_to_vectors+0x7e/0x120 [ice] [53764.029089] Code: 41 0d 0f b7 b7 12 05 00 00 0f b6 d0 44 29 de 44 0f b7 c6 44 01 c2 41 39 d0 7d 2d 4c 8b 47 28 44 0f b7 ce 83 c6 01 4f 8b 04 c8 <49> 89 48 28 4 c 8b 89 b8 01 00 00 4d 89 08 4c 89 81 b8 01 00 00 44 [53764.048379] RSP: 0018:ff550dd88ea47b20 EFLAGS: 00010206 [53764.053884] RAX: 0000000000000002 RBX: 0000000000000004 RCX: ff385ea42fa4a018 [53764.061301] RDX: 0000000000000006 RSI: 0000000000000005 RDI: ff385e9baeedd018 [53764.068717] RBP: 0000000000000010 R08: 0000000000000000 R09: 0000000000000004 [53764.076133] R10: 0000000000000002 R11: 0000000000000004 R12: 0000000000000000 [53764.083553] R13: 0000000000000000 R14: ff385e658fdd9000 R15: ff385e9baeedd018 [53764.090976] FS: 000014872c5b5740(0000) GS:ff385e847f100000(0000) knlGS:0000000000000000 [53764.099362] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [53764.105409] CR2: 0000000000000028 CR3: 0000000a820fa002 CR4: 0000000000761ee0 [53764.112851] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [53764.120301] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [53764.127747] PKRU: 55555554 [53764.130781] Call Trace: [53764.133564] ice_vsi_rebuild+0x611/0x870 [ice] [53764.138341] ice_vsi_recfg_qs+0x94/0x100 [ice] [53764.143116] ice_set_channels+0x1a8/0x3e0 [ice] [53764.147975] ethtool_set_channels+0x14e/0x240 [53764.152667] dev_ethtool+0xd74/0x2a10 [53764.156665] ? __mod_lruvec_state+0x44/0x110 [53764.161280] ? __mod_lruvec_state+0x44/0x110 [53764.165893] ? page_add_file_rmap+0x15/0x170 [53764.170518] ? inet_ioctl+0xd1/0x220 [53764.174445] ? netdev_run_todo+0x5e/0x290 [53764.178808] dev_ioctl+0xb5/0x550 [53764.182485] sock_do_ioctl+0xa0/0x140 [53764.186512] sock_ioctl+0x1a8/0x300 [53764.190367] ? selinux_file_ioctl+0x161/0x200 [53764.195090] do_vfs_ioctl+0xa4/0x640 [53764.199035] ksys_ioctl+0x60/0x90 [53764.202722] __x64_sys_ioctl+0x16/0x20 [53764.206845] do_syscall_64+0x5b/0x1a0 [53764.210887] entry_SYSCALL_64_after_hwframe+0x65/0xca Fixes: 87324e74 ("ice: Implement ethtool ops for channels") Signed-off-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Anatolii Gerasymenko authored
In current implementation ice_update_phy_type enables all link modes for selected speed. This approach doesn't work for 1000M speeds, because both copper (1000baseT) and optical (1000baseX) standards cannot be enabled at once. Fix this, by adding the function `ice_set_phy_type_from_speed()` for 1000M speeds. Fixes: 48cb27f2 ("ice: Implement handlers for ethtool PHY/link operations") Signed-off-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-