- 20 Jan, 2014 23 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 cleanups from Ingo Molnar: "Misc cleanups" * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, cpu, amd: Fix a shadowed variable situation um, x86: Fix vDSO build x86: Delete non-required instances of include <linux/init.h> x86, realmode: Pointer walk cleanups, pull out invariant use of __pa() x86/traps: Clean up error exception handler definitions
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86/build changes from Ingo Molnar: "Misc smaller improvements" * 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, boot: Move intcall() to the .inittext section x86, boot: Use .code16 instead of .code16gcc x86, sparse: Do not force removal of __user when calling copy_to/from_user_nocheck()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86/asm changes from Ingo Molnar: "Misc optimizations" * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Slightly tweak the access_ok() C variant for better code x86: Replace assembly access_ok() with a C variant x86-64, copy_user: Use leal to produce 32-bit results x86-64, copy_user: Remove zero byte check before copy user buffer.
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86/apic changes from Ingo Molnar: "Two main changes: - improve local APIC Error Status Register reporting robustness - add the 'disable_cpu_apicid=x' boot parameter for kexec booting" * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, apic: Make disabled_cpu_apicid static read_mostly, fix typos x86, apic, kexec: Add disable_cpu_apicid kernel parameter x86/apic: Read Error Status Register correctly
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer changes from Ingo Molnar: - ARM clocksource/clockevent improvements and fixes - generic timekeeping updates: TAI fixes/improvements, cleanups - Posix cpu timer cleanups and improvements - dynticks updates: full dynticks bugfixes, optimizations and cleanups * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits) clocksource: Timer-sun5i: Switch to sched_clock_register() timekeeping: Remove comment that's mostly out of date rtc-cmos: Add an alarm disable quirk timekeeper: fix comment typo for tk_setup_internals() timekeeping: Fix missing timekeeping_update in suspend path timekeeping: Fix CLOCK_TAI timer/nanosleep delays tick/timekeeping: Call update_wall_time outside the jiffies lock timekeeping: Avoid possible deadlock from clock_was_set_delayed timekeeping: Fix potential lost pv notification of time change timekeeping: Fix lost updates to tai adjustment clocksource: sh_cmt: Add clk_prepare/unprepare support clocksource: bcm_kona_timer: Remove unused bcm_timer_ids clocksource: vt8500: Remove deprecated IRQF_DISABLED clocksource: tegra: Remove deprecated IRQF_DISABLED clocksource: misc drivers: Remove deprecated IRQF_DISABLED clocksource: sh_mtu2: Remove unnecessary platform_set_drvdata() clocksource: sh_tmu: Remove unnecessary platform_set_drvdata() clocksource: armada-370-xp: Enable timer divider only when needed clocksource: clksrc-of: Warn if no clock sources are found clocksource: orion: Switch to sched_clock_register() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler changes from Ingo Molnar: - Add the initial implementation of SCHED_DEADLINE support: a real-time scheduling policy where tasks that meet their deadlines and periodically execute their instances in less than their runtime quota see real-time scheduling and won't miss any of their deadlines. Tasks that go over their quota get delayed (Available to privileged users for now) - Clean up and fix preempt_enable_no_resched() abuse all around the tree - Do sched_clock() performance optimizations on x86 and elsewhere - Fix and improve auto-NUMA balancing - Fix and clean up the idle loop - Apply various cleanups and fixes * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits) sched: Fix __sched_setscheduler() nice test sched: Move SCHED_RESET_ON_FORK into attr::sched_flags sched: Fix up attr::sched_priority warning sched: Fix up scheduler syscall LTP fails sched: Preserve the nice level over sched_setscheduler() and sched_setparam() calls sched/core: Fix htmldocs warnings sched/deadline: No need to check p if dl_se is valid sched/deadline: Remove unused variables sched/deadline: Fix sparse static warnings m68k: Fix build warning in mac_via.h sched, thermal: Clean up preempt_enable_no_resched() abuse sched, net: Fixup busy_loop_us_clock() sched, net: Clean up preempt_enable_no_resched() abuse sched/preempt: Fix up missed PREEMPT_NEED_RESCHED folding sched/preempt, locking: Rework local_bh_{dis,en}able() sched/clock, x86: Avoid a runtime condition in native_sched_clock() sched/clock: Fix up clear_sched_clock_stable() sched/clock, x86: Use a static_key for sched_clock_stable sched/clock: Remove local_irq_disable() from the clocks sched/clock, x86: Rewrite cyc2ns() to avoid the need to disable IRQs ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf updates from Ingo Molnar: "Kernel side changes: - Add Intel RAPL energy counter support (Stephane Eranian) - Clean up uprobes (Oleg Nesterov) - Optimize ring-buffer writes (Peter Zijlstra) Tooling side changes, user visible: - 'perf diff': - Add column colouring improvements (Ramkumar Ramachandra) - 'perf kvm': - Add guest related improvements, including allowing to specify a directory with guest specific /proc information (Dongsheng Yang) - Add shell completion support (Ramkumar Ramachandra) - Add '-v' option (Dongsheng Yang) - Support --guestmount (Dongsheng Yang) - 'perf probe': - Support showing source code, asking for variables to be collected at probe time and other 'perf probe' operations that use DWARF information. This supports only binaries with debugging information at this time, detached debuginfo (aka debuginfo packages) support should come in later patches (Masami Hiramatsu) - 'perf record': - Rename --no-delay option to --no-buffering, better reflecting its purpose and freeing up '--delay' to take the place of '--initial-delay', so that 'record' and 'stat' are consistent (Arnaldo Carvalho de Melo) - Default the -t/--thread option to no inheritance (Adrian Hunter) - Make per-cpu mmaps the default (Adrian Hunter) - 'perf report': - Improve callchain processing performance (Frederic Weisbecker) - Retain bfd reference to lookup source line numbers, greatly optimizing, among other use cases, 'perf report -s srcline' (Adrian Hunter) - Improve callchain processing performance even more (Namhyung Kim) - Add a perf.data file header window in the 'perf report' TUI, associated with the 'i' hotkey, providing a counterpart to the --header option in the stdio UI (Namhyung Kim) - 'perf script': - Add an option in 'perf script' to print the source line number (Adrian Hunter) - Add --header/--header-only options to 'script' and 'report', the default is not tho show the header info, but as this has been the default for some time, leave a single line explaining how to obtain that information (Jiri Olsa) - Add options to show comm, fork, exit and mmap PERF_RECORD_ events (Namhyung Kim) - Print callchains and symbols if they exist (David Ahern) - 'perf timechart' - Add backtrace support to CPU info - Print pid along the name - Add support for CPU topology - Add new option --highlight'ing threads, be it by name or, if a numeric value is provided, that run more than given duration (Stanislav Fomichev) - 'perf top': - Make 'perf top -g' refer to callchains, for consistency with other tools (David Ahern) - 'perf trace': - Handle old kernels where the "raw_syscalls" tracepoints were called plain "syscalls" (David Ahern) - Remove thread summary coloring, by Pekka Enberg. - Honour -m option in 'trace', the tool was offering the option to set the mmap size, but wasn't using it when doing the actual mmap on the events file descriptors (Jiri Olsa) - generic: - Backport libtraceevent plugin support (trace-cmd repository, with plugins for jbd2, hrtimer, kmem, kvm, mac80211, sched_switch, function, xen, scsi, cfg80211 (Jiri Olsa) - Print session information only if --stdio is given (Namhyung Kim) Tooling side changes, developer visible (plumbing): - Improve 'perf probe' exit path, release resources (Masami Hiramatsu) - Improve libtraceevent plugins exit path, allowing the registering of an unregister handler to be called at exit time (Namhyung Kim) - Add an alias to the build test makefile (make -C tools/perf build-test) (Namhyung Kim) - Get rid of die() and friends (good riddance!) in libtraceevent (Namhyung Kim) - Fix cross build problems related to pkgconfig and CROSS_COMPILE not being propagated to the feature tests, leading to features being tested in the host and then being enabled on the target (Mark Rutland) - Improve forked workload error reporting by sending the errno in the signal data queueing integer field, using sigqueue and by doing the signal setup in the evlist methods, removing open coded equivalents in various tools (Arnaldo Carvalho de Melo) - Do more auto exit cleanup chores in the 'evlist' destructor, so that the tools don't have to all do that sequence (Arnaldo Carvalho de Melo) - Pack 'struct perf_session_env' and 'struct trace' (Arnaldo Carvalho de Melo) - Add test for building detached source tarballs (Arnaldo Carvalho de Melo) - Move some header files (tools/perf/ to tools/include/ to make them available to other tools/ dwelling codebases (Namhyung Kim) - Move logic to warn about kptr_restrict'ed kernels to separate function in 'report' (Arnaldo Carvalho de Melo) - Move hist browser selection code to separate function (Arnaldo Carvalho de Melo) - Move histogram entries collapsing to separate function (Arnaldo Carvalho de Melo) - Introduce evlist__for_each() & friends (Arnaldo Carvalho de Melo) - Automate setup of FEATURE_CHECK_(C|LD)FLAGS-all variables (Jiri Olsa) - Move arch setup into seprate Makefile (Jiri Olsa) - Make libtraceevent install target quieter (Jiri Olsa) - Make tests/make output more compact (Jiri Olsa) - Ignore generated files in feature-checks (Chunwei Chen) - Introduce pevent_filter_strerror() in libtraceevent, similar in purpose to libc's strerror() function (Namhyung Kim) - Use perf_data_file methods to write output file in 'record' and 'inject' (Jiri Olsa) - Use pr_*() functions where applicable in 'report' (Namhyumg Kim) - Add 'machine' 'addr_location' struct to have full picture (machine, thread, map, symbol, addr) for a (partially) resolved address, reducing function signatures (Arnaldo Carvalho de Melo) - Reduce code duplication in the histogram entry creation/insertion (Arnaldo Carvalho de Melo) - Auto allocate annotation histogram data structures (Arnaldo Carvalho de Melo) - No need to test against NULL before calling free, also set freed memory in struct pointers to NULL, to help fixing use after free bugs (Arnaldo Carvalho de Melo) - Rename some struct DSO binary_type related members and methods, to clarify its purpose and need for differentiation (symtab_type, ie one is about the files .text, CFI, etc, i.e. its binary contents, and the other is about where the symbol table came from (Arnaldo Carvalho de Melo) - Convert to new topic libraries, starting with an API one (sysfs, debugfs, etc), renaming liblk in the process (Borislav Petkov) - Get rid of some more panic() like error handling in libtraceevent. (Namhyung Kim) - Get rid of panic() like calls in libtraceevent (Namyung Kim) - Start carving out symbol parsing routines (perf, just moving routines to topic files in tools/lib/symbol/, tools that want to use it need to integrate it directly, ie no tools/lib/symbol/Makefile is provided (Arnaldo Carvalho de Melo) - Assorted refactoring patches, moving code around and adding utility evlist methods that will be used in the IPT patchset (Adrian Hunter) - Assorted mmap_pages handling fixes (Adrian Hunter) - Several man pages typo fixes (Dongsheng Yang) - Get rid of several die() calls in libtraceevent (Namhyung Kim) - Use basename() in a more robust way, to avoid problems related to different system library implementations for that function (Stephane Eranian) - Remove open coded management of short_name_allocated member (Adrian Hunter) - Several cleanups in the "dso" methods, constifying some parameters and renaming some fields to clarify its purpose (Arnaldo Carvalho de Melo) - Add per-feature check flags, fixing libunwind related build problems on some architectures (Jean Pihet) - Do not disable source line lookup just because of one failure. (Adrian Hunter) - Several 'perf kvm' man page corrections (Dongsheng Yang) - Correct the message in feature-libnuma checking, swowing the right devel package names for various distros (Dongsheng Yang) - Polish 'readn()' function and introduce its counterpart, 'writen()' (Jiri Olsa) - Start moving timechart state from global variables to a 'perf_tool' derived 'timechart' struct (Arnaldo Carvalho de Melo) ... and lots of fixes and improvements I forgot to list" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (282 commits) perf tools: Remove unnecessary callchain cursor state restore on unmatch perf callchain: Spare double comparison of callchain first entry perf tools: Do proper comm override error handling perf symbols: Export elf_section_by_name and reuse perf probe: Release all dynamically allocated parameters perf probe: Release allocated probe_trace_event if failed perf tools: Add 'build-test' make target tools lib traceevent: Unregister handler when xen plugin is unloaded tools lib traceevent: Unregister handler when scsi plugin is unloaded tools lib traceevent: Unregister handler when jbd2 plugin is is unloaded tools lib traceevent: Unregister handler when cfg80211 plugin is unloaded tools lib traceevent: Unregister handler when mac80211 plugin is unloaded tools lib traceevent: Unregister handler when sched_switch plugin is unloaded tools lib traceevent: Unregister handler when kvm plugin is unloaded tools lib traceevent: Unregister handler when kmem plugin is unloaded tools lib traceevent: Unregister handler when hrtimer plugin is unloaded tools lib traceevent: Unregister handler when function plugin is unloaded tools lib traceevent: Add pevent_unregister_print_function() tools lib traceevent: Add pevent_unregister_event_handler() tools lib traceevent: fix pointer-integer size mismatch ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull IRQ changes from Ingo Molnar: "The only change in this cycle is a CPU hotplug related spurious warning fix" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/irq: Fix kbuild warning in smp_irq_move_cleanup_interrupt() x86/irq: Fix do_IRQ() interrupt warning for cpu hotplug retriggered irqs
-
Linus Torvalds authored
Merge branch 'core-stackprotector-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull strong stackprotector support from Ingo Molnar: "This tree adds a CONFIG_CC_STACKPROTECTOR_STRONG=y, a new, stronger stack canary checking method supported by the newest GCC versions (4.9 and later). Here's the 'intensity comparison' between the various protection modes: - defconfig 11430641 kernel text size 36110 function bodies - defconfig + CONFIG_CC_STACKPROTECTOR_REGULAR 11468490 kernel text size (+0.33%) 1015 of 36110 functions are stack-protected (2.81%) - defconfig + CONFIG_CC_STACKPROTECTOR_STRONG via this patch 11692790 kernel text size (+2.24%) 7401 of 36110 functions are stack-protected (20.5%) the strong model comes with non-trivial costs, which is why we preserved the 'regular' and 'none' models as well" * 'core-stackprotector-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: stackprotector: Introduce CONFIG_CC_STACKPROTECTOR_STRONG stackprotector: Unify the HAVE_CC_STACKPROTECTOR logic between architectures
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull RCU updates from Ingo Molnar: - add RCU torture scripts/tooling - static analysis improvements - update RCU documentation - miscellaneous fixes * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits) rcu: Remove "extern" from function declarations in kernel/rcu/rcu.h rcu: Remove "extern" from function declarations in include/linux/*rcu*.h rcu/torture: Dynamically allocate SRCU output buffer to avoid overflow rcu: Don't activate RCU core on NO_HZ_FULL CPUs rcu: Warn on allegedly impossible rcu_read_unlock_special() from irq rcu: Add an RCU_INITIALIZER for global RCU-protected pointers rcu: Make rcu_assign_pointer's assignment volatile and type-safe bonding: Use RCU_INIT_POINTER() for better overhead and for sparse rcu: Add comment on evaluate-once properties of rcu_assign_pointer(). rcu: Provide better diagnostics for blocking in RCU callback functions rcu: Improve SRCU's grace-period comments rcu: Fix CONFIG_RCU_FANOUT_EXACT for odd fanout/leaf values rcu: Fix coccinelle warnings rcutorture: Stop tracking FSF's postal address rcutorture: Move checkarg to functions.sh rcutorture: Flag errors and warnings with color coding rcutorture: Record results from repeated runs of the same test scenario rcutorture: Test summary at end of run with less chattiness rcutorture: Update comment in kvm.sh listing typical RCU trace events rcutorture: Add tracing-enabled version of TREE08 ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull core locking changes from Ingo Molnar: - futex performance increases: larger hashes, smarter wakeups - mutex debugging improvements - lots of SMP ordering documentation updates - introduce the smp_load_acquire(), smp_store_release() primitives. (There are WIP patches that make use of them - not yet merged) - lockdep micro-optimizations - lockdep improvement: better cover IRQ contexts - liblockdep at last. We'll continue to monitor how useful this is * 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits) futexes: Fix futex_hashsize initialization arch: Re-sort some Kbuild files to hopefully help avoid some conflicts futexes: Avoid taking the hb->lock if there's nothing to wake up futexes: Document multiprocessor ordering guarantees futexes: Increase hash table size for better performance futexes: Clean up various details arch: Introduce smp_load_acquire(), smp_store_release() arch: Clean up asm/barrier.h implementations using asm-generic/barrier.h arch: Move smp_mb__{before,after}_atomic_{inc,dec}.h into asm/atomic.h locking/doc: Rename LOCK/UNLOCK to ACQUIRE/RELEASE mutexes: Give more informative mutex warning in the !lock->owner case powerpc: Full barrier for smp_mb__after_unlock_lock() rcu: Apply smp_mb__after_unlock_lock() to preserve grace periods Documentation/memory-barriers.txt: Downgrade UNLOCK+BLOCK locking: Add an smp_mb__after_unlock_lock() for UNLOCK+BLOCK barrier Documentation/memory-barriers.txt: Document ACCESS_ONCE() Documentation/memory-barriers.txt: Prohibit speculative writes Documentation/memory-barriers.txt: Add long atomic examples to memory-barriers.txt Documentation/memory-barriers.txt: Add needed ACCESS_ONCE() calls to memory-barriers.txt Revert "smp/cpumask: Make CONFIG_CPUMASK_OFFSTACK=y usable without debug dependency" ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull core debug changes from Ingo Molnar: "Currently there are two methods to set the panic_timeout: via 'panic=X' boot commandline option, or via /proc/sys/kernel/panic. This tree adds a third panic_timeout configuration method: configuration via Kconfig, via CONFIG_PANIC_TIMEOUT=X - useful to distros that generally want their kernel defaults to come with the .config. CONFIG_PANIC_TIMEOUT defaults to 0, which was the previous default value of panic_timeout. Doing that unearthed a few arch trickeries regarding arch-special panic_timeout values and related complications - hopefully all resolved to the satisfaction of everyone" * 'core-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: powerpc: Clean up panic_timeout usage MIPS: Remove panic_timeout settings panic: Make panic_timeout configurable
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktestLinus Torvalds authored
Pull ktest updates from Steven Rostedt: "Here's some basic updates to ktest.pl. They include: - add config to modify the signal to terminate console - update to documentation (missing some config options) - add KERNEL_VERSION variable to use for other configs - add '=~' to let configs eval other configs - add BISECT_TRIES to run multiple tests per git bisect good" * tag 'ktest-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest: ktest: Add BISECT_TRIES to bisect test ktest: Add eval '=~' command to modify variables in config file ktest: Add special variable ${KERNEL_VERSION} ktest: Add documentation of CLOSE_CONSOLE_SIGNAL ktest: Make the signal to terminate the console configurable
-
Linus Torvalds authored
Merge tag 'localmodconfig-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-kconfig Pull localmodconfig update from Steven Rostedt: "While debugging the problem with localmodconfig and the ALSA codec modules all being set, I discovered a small bug in the dependency logic. If a config has a dependency based on its setting value, localmodcondig misses it. For example: config FOO default y if BAR || ZOO If FOO is needed for a module and is set to '=m', and so are BAR or ZOO, localmodconfig will not see that BAR or ZOO are also needed for the foo module, and will incorrectly disable them" * tag 'localmodconfig-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-kconfig: localmodconfig: Add config depends by default settings
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-stagingLinus Torvalds authored
Pull hwmon updates from Guenter Roeck: "Add support for Kaveri CPUs to k10temp driver. Add support for S12x0 to coretemp driver. Cleanup and minor fixes in several drivers. Notable are 'Do not return -EAGAIN for low temperatures' to coretemp and 'Re-enable logical device mapping for NCT6791 during resume' to nct6775. Both will be sent to -stable, but only after some time in mainline" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (k10temp) Add support for Kaveri CPUs hwmon: (sht15) add include guard hwmon: (max197) add include guard hwmon: (nct6775) Re-enable logical device mapping for NCT6791 during resume hwmon: (s3c) Trivial cleanup in hwmon-s3c.h hwmon: (coretemp) Do not return -EAGAIN for low temperatures hwmon: (da9052) Fix adc to voltage calculation hwmon: (coretemp) Refine TjMax detection hwmon: (coretemp) Add PCI device ID for CE41x0 CPUs hwmon: (coretemp) Use PCI host bridge ID to identify CPU if necessary hwmon: remove DEFINE_PCI_DEVICE_TABLE macro
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linuxLinus Torvalds authored
Pull ia64 Xen removal from Tony Luck: "Nobody has been maintaining xen in ia64 for a long time. Rip it all out so people do not waste time making updates to broken/dead code" * tag 'please-pull-rm_xen' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: ia64/xen: Remove Xen support for ia64
-
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds authored
Pull EDAC updates from Borislav Petkov: - mpc85xx PCIe error interrupt support - misc small enhancements/fixes all over the place. * tag 'edac_for_3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: EDAC: Don't try to cancel workqueue when it's never setup e752x_edac: Fix pci_dev usage count sb_edac: Mark get_mci_for_node_id as static EDAC: Mark edac_create_debug_nodes as static amd64_edac: Remove "amd64" prefix from static functions amd64_edac: Simplify code around decode_bus_error amd64_edac: Mark amd64_decode_bus_error as static EDAC: Remove DEFINE_PCI_DEVICE_TABLE macro amd64_edac: Fix condition to verify max channels allowed for F15 M30h edac/85xx: Add PCIe error interrupt edac support
-
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metagLinus Torvalds authored
Pull Metag architecture changes from James Hogan: - A few cleanups and minor bug fixes. - Kill SMP single function call IPI. * tag 'metag-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag: metag/smp: Make boot_secondary() static metag: topology: export 'cpu_core_map' smp, metag: kill SMP single function call interrupt metag: smp: don't set irq regs in do_IPI() metag: dma: remove dead code in dma_alloc_init()
-
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68kLinus Torvalds authored
Pull m68k updates from Geert Uytterhoeven: - Zorro bus cleanups and UAPI revival - Bootinfo cleanups and UAPI revival - Kexec support - Memory size reductions and bug fixes for multi-platform kernels - Polled interrupt support for Atari EtherNAT, EtherNEC and NetUSBee - Machine-specific random_get_entropy() - Defconfig updates and cleanups * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: (46 commits) m68k/mac: Make SCC reset work more reliably m68k/irq - Use polled IRQ flag for MFP timer cascaded interrupts m68k: Update defconfigs for v3.13-rc1 m68k/defconfig: Enable EARLY_PRINTK m68k/mm: kmap spelling/grammar fixes m68k: Convert arch/m68k/kernel/traps.c to pr_*() m68k: Convert arch/m68k/mm/fault.c to pr_*() m68k/mm: Check for mm != NULL in do_page_fault() debug code m68k/defconfig: Disable /sbin/hotplug fork-bomb by default m68k/atari: Hide RTC_PORT() macro from rtc-cmos m68k/amiga,atari: Fix specifying multiple debug= parameters m68k/defconfig: Use ext4 for ext2/ext3 file systems m68k: Add support to export bootinfo in procfs m68k: Add kexec support m68k/mac: Mark Mac IIsi ADB driver BROKEN m68k/amiga: Provide mach_random_get_entropy() m68k: Add infrastructure for machine-specific random_get_entropy() m68k/atari: Call paging_init() before nf_init() m68k: Remove superfluous inclusions of <asm/bootinfo.h> m68k/UAPI: Use proper types (endianness/size) in <asm/bootinfo*.h> ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 updates from Martin Schwidefsky: "The bulk of the s390 updates for v3.14. New features are the perf support for the CPU-Measurement Sample Facility and the EP11 support for the crypto cards. And the normal cleanups and bug-fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (44 commits) s390/cpum_sf: fix printk format warnings s390: Fix misspellings using 'codespell' tool s390/qdio: bridgeport support - CHSC part s390: delete new instances of __cpuinit usage s390/compat: fix PSW32_USER_BITS definition s390/zcrypt: add support for EP11 coprocessor cards s390/mm: optimize randomize_et_dyn for !PF_RANDOMIZE s390: use IS_ENABLED to check if a CONFIG is set to y or m s390/cio: use device_lock to synchronize calls to the ccwgroup driver s390/cio: use device_lock to synchronize calls to the ccw driver s390/cio: fix unlocked access of online member s390/cpum_sf: Add flag to process full SDBs only s390/cpum_sf: Add raw data sampling to support the diagnostic-sampling function s390/cpum_sf: Filter perf events based event->attr.exclude_* settings s390/cpum_sf: Detect KVM guest samples s390/cpum_sf: Add helper to read TOD from trailer entries s390/cpum_sf: Atomically reset trailer entry fields of sample-data-blocks s390/cpum_sf: Dynamically extend the sampling buffer if overflows occur s390/pci: reenable per default s390/pci/dma: fix accounting of allocated_pages ...
-
Linus Torvalds authored
-
Ilia Mirkin authored
Since commit 61b365a5 ("drm/nouveau: populate master subdev pointer only when fully constructed"), the nouveau_mxm(bios) call will return NULL, since it's still being called from the constructor. Instead, pass the mxm pointer via the unused data field. See https://bugs.freedesktop.org/show_bug.cgi?id=73791Reported-by:
Andreas Reis <andreas.reis@gmail.com> Tested-by:
Andreas Reis <andreas.reis@gmail.com> Signed-off-by:
Ilia Mirkin <imirkin@alum.mit.edu> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull last-minute ACPI fix from Rafael Wysocki: "This reverts a commit that causes the Alan Cox' ASUS T100TA to "crash and burn" during boot if the Baytrail pinctrl driver is compiled in" * tag 'acpi-3.13-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "ACPI: Add BayTrail SoC GPIO and LPSS ACPI IDs"
-
- 19 Jan, 2014 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: - an s2ram related fix on AMD systems - a perf fault handling bug that is relatively old but which has become much easier to trigger in v3.13 after commit e00b12e6 ("perf/x86: Further optimize copy_from_user_nmi()") * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/amd/ibs: Fix waking up from S3 for AMD family 10h x86, mm, perf: Allow recursive faults from interrupts
-
Stephen Boyd authored
The 32-bit sched_clock() interface supports 64 bits since 3.13-rc1. Upgrade to the 64-bit function to allow us to remove the 32-bit registration interface. Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Acked-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1389922686-6249-1-git-send-email-sboyd@codeaurora.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org>
-
Ingo Molnar authored
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf improvements and fixes from Arnaldo Carvalho de Melo: Infrastructure changes: * Improve callchain processing by removing unnecessary work. (Frederic Weisbecker) * Fix comm override error handling (Frederic Weisbecker) * Improve 'perf probe' exit path, release resources (Masami Hiramatsu) * Improve libtraceevent plugins exit path, allowing the registering of an unregister handler to be called at exit time (Namhyung Kim) * Add an alias to the build test makefile (make -C tools/perf build-test) (Namhyung Kim) Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
Finn Thain authored
For SCC initialization we cannot assume that the control register is in the correct state to accept a register pointer. So first read from the control register in order to "sync" up. Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org>
-
Steven Rostedt (Red Hat) authored
For those cases that it takes several tries to hit a bug, it would be useful for ktest.pl to try a test multiple times before it considers the test as a pass. To accomplish this, BISECT_TRIES ktest config option has been added. It is default to one, as most of the time a bisect only needs to try a test once. But the user can now up this to make ktest run a given test multiple times. The first failure that is detected will set a bisect bad. It only repeats on success. Note, as with all race bugs, there's no guarantee that if it succeeds, it is really a good bisect. But it helps in case the bug is somewhat reliable. You can set BISECT_TRIES to zero, and all tests will be considered good, unless you also set BISECT_MANUAL. Suggested-by:
"Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org>
-
- 18 Jan, 2014 9 commits
-
-
Rafael J. Wysocki authored
This reverts commit f6308b36 (ACPI: Add BayTrail SoC GPIO and LPSS ACPI IDs), because it causes the Alan Cox' ASUS T100TA to "crash and burn" during boot if the Baytrail pinctrl driver is compiled in. Fixes: f6308b36 (ACPI: Add BayTrail SoC GPIO and LPSS ACPI IDs) Reported-by:
One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk> Requested-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) The value choosen for the new SO_MAX_PACING_RATE socket option on parisc was very poorly choosen, let's fix it while we still can. From Eric Dumazet. 2) Our generic reciprocal divide was found to handle some edge cases incorrectly, part of this is encoded into the BPF as deep as the JIT engines themselves. Just use a real divide throughout for now. From Eric Dumazet. 3) Because the initial lookup is lockless, the TCP metrics engine can end up creating two entries for the same lookup key. Fix this by doing a second lookup under the lock before we actually create the new entry. From Christoph Paasch. 4) Fix scatter-gather list init in usbnet driver, from Bjørn Mork. 5) Fix unintended 32-bit truncation in cxgb4 driver's bit shifting. From Dan Carpenter. 6) Netlink socket dumping uses the wrong socket state for timewait sockets. Fix from Neal Cardwell. 7) Fix netlink memory leak in ieee802154_add_iface(), from Christian Engelmayer. 8) Multicast forwarding in ipv4 can overflow the per-rule reference counts, causing all multicast traffic to cease. Fix from Hannes Frederic Sowa. 9) via-rhine needs to stop all TX queues when it resets the device, from Richard Weinberger. 10) Fix RDS per-cpu accesses broken by the this_cpu_* conversions. From Gerald Schaefer. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: s390/bpf,jit: fix 32 bit divisions, use unsigned divide instructions parisc: fix SO_MAX_PACING_RATE typo ipv6: simplify detection of first operational link-local address on interface tcp: metrics: Avoid duplicate entries with the same destination-IP net: rds: fix per-cpu helper usage e1000e: Fix compilation warning when !CONFIG_PM_SLEEP bpf: do not use reciprocal divide be2net: add dma_mapping_error() check for dma_map_page() bnx2x: Don't release PCI bars on shutdown net,via-rhine: Fix tx_timeout handling batman-adv: fix batman-adv header overhead calculation qlge: Fix vlan netdev features. net: avoid reference counter overflows on fib_rules in multicast forwarding dm9601: add USB IDs for new dm96xx variants MAINTAINERS: add virtio-dev ML for virtio ieee802154: Fix memory leak in ieee802154_add_iface() net: usbnet: fix SG initialisation inet_diag: fix inet_diag_dump_icsk() to use correct state for timewait sockets cxgb4: silence shift wrapping static checker warning
-
Heiko Carstens authored
The s390 bpf jit compiler emits the signed divide instructions "dr" and "d" for unsigned divisions. This can cause problems: the dividend will be zero extended to a 64 bit value and the divisor is the 32 bit signed value as specified A or X accumulator, even though A and X are supposed to be treated as unsigned values. The divide instrunctions will generate an exception if the result cannot be expressed with a 32 bit signed value. This is the case if e.g. the dividend is 0xffffffff and the divisor either 1 or also 0xffffffff (signed: -1). To avoid all these issues simply use unsigned divide instructions. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
SO_MAX_PACING_RATE definition on parisc got a typo. Its not too late to fix it, before 3.13 is official. Fixes: 62748f32 ("net: introduce SO_MAX_PACING_RATE") Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hannes Frederic Sowa authored
In commit 1ec047eb ("ipv6: introduce per-interface counter for dad-completed ipv6 addresses") I build the detection of the first operational link-local address much to complex. Additionally this code now has a race condition. Replace it with a much simpler variant, which just scans the address list when duplicate address detection completes, to check if this is the first valid link local address and send RS and MLD reports then. Fixes: 1ec047eb ("ipv6: introduce per-interface counter for dad-completed ipv6 addresses") Reported-by:
Jiri Pirko <jiri@resnulli.us> Cc: Flavio Leitner <fbl@redhat.com> Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by:
Flavio Leitner <fbl@redhat.com> Acked-by:
Jiri Pirko <jiri@resnulli.us> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Christoph Paasch authored
Because the tcp-metrics is an RCU-list, it may be that two soft-interrupts are inside __tcp_get_metrics() for the same destination-IP at the same time. If this destination-IP is not yet part of the tcp-metrics, both soft-interrupts will end up in tcpm_new and create a new entry for this IP. So, we will have two tcp-metrics with the same destination-IP in the list. This patch checks twice __tcp_get_metrics(). First without holding the lock, then while holding the lock. The second one is there to confirm that the entry has not been added by another soft-irq while waiting for the spin-lock. Fixes: 51c5d0c4 (tcp: Maintain dynamic metrics in local cache.) Signed-off-by:
Christoph Paasch <christoph.paasch@uclouvain.be> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Gerald Schaefer authored
commit ae4b46e9 "net: rds: use this_cpu_* per-cpu helper" broke per-cpu handling for rds. chpfirst is the result of __this_cpu_read(), so it is an absolute pointer and not __percpu. Therefore, __this_cpu_write() should not operate on chpfirst, but rather on cache->percpu->first, just like __this_cpu_read() did before. Cc: <stable@vger.kernel.org> # 3.8+ Signed-off-byd Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespaceLinus Torvalds authored
Pull namespace fixes from Eric Biederman: "This is a set of 3 regression fixes. This fixes /proc/mounts when using "ip netns add <netns>" to display the actual mount point. This fixes a regression in clone that broke lxc-attach. This fixes a regression in the permission checks for mounting /proc that made proc unmountable if binfmt_misc was in use. Oops. My apologies for sending this pull request so late. Al Viro gave interesting review comments about the d_path fix that I wanted to address in detail before I sent this pull request. Unfortunately a bad round of colds kept from addressing that in detail until today. The executive summary of the review was: Al: Is patching d_path really sufficient? The prepend_path, d_path, d_absolute_path, and __d_path family of functions is a really mess. Me: Yes, patching d_path is really sufficient. Yes, the code is mess. No it is not appropriate to rewrite all of d_path for a regression that has existed for entirely too long already, when a two line change will do" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: vfs: Fix a regression in mounting proc fork: Allow CLONE_PARENT after setns(CLONE_NEWPID) vfs: In d_path don't call d_dname on a mount point
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fix from Paolo Bonzini: "Fix for a brown paper bag bug. Thanks to Drew Jones for noticing" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm: x86: fix apic_base enable check
-
- 17 Jan, 2014 3 commits
-
-
Frederic Weisbecker authored
If a new callchain branch doesn't match a single entry of the node that it is given against comparison in append_chain(), then the cursor is expected to be at the same position as it was before the comparison loop. As such, there is no need to restore the cursor position on exit in case of non matching branches. Signed-off-by:
Frederic Weisbecker <fweisbec@gmail.com> Reviewed-by:
Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1389713836-13375-4-git-send-email-fweisbec@gmail.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Frederic Weisbecker authored
When a new callchain child branch matches an existing one in the rbtree, the comparison of its first entry is performed twice: 1) From append_chain_children() on branch lookup 2) If 1) reports a match, append_chain() then compares all entries of the new branch against the matching node in the rbtree, and this comparison includes the first entry of the new branch again. Lets shortcut this by performing the whole comparison only from append_chain() which then returns the result of the comparison between the first entry of the new branch and the iterating node in the rbtree. If the first entry matches, the lookup on the current level of siblings stops and propagates to the children of the matching nodes. This results in less comparisons performed by the CPU. Signed-off-by:
Frederic Weisbecker <fweisbec@gmail.com> Acked-by:
Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1389713836-13375-3-git-send-email-fweisbec@gmail.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
git://git.open-mesh.org/linux-mergeDavid S. Miller authored
Included change: - properly compute the batman-adv header overhead. Such result is later used to initialize the hard_header_len member of the soft-interface netdev object Signed-off-by:
David S. Miller <davem@davemloft.net>
-