- 26 Sep, 2023 5 commits
-
-
Johannes Berg authored
Make __ieee80211_data_to_8023() return more individual drop reasons instead of just doing RX_DROP_U_INVALID_8023. Signed-off-by:Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
This has many different reasons, split the return value into the individual reasons for better traceability. Also, since symbolic tracing doesn't work for these, add a few comments for the numbering. Signed-off-by: -
Johannes Berg authored
Convert all instances of RX_DROP_UNUSABLE to indicate a better reason, and then remove RX_DROP_UNUSABLE. Signed-off-by: -
Johannes Berg authored
If we just check "result & RX_DROP_UNUSABLE", this really only works by accident, because SKB_DROP_REASON_SUBSYS_MAC80211_UNUSABLE got to have the value 1, and SKB_DROP_REASON_SUBSYS_MAC80211_MONITOR is 2. Fix this to really check the entire subsys mask for the value, so it doesn't matter what the subsystem value is. Fixes: 7f4e0970 ("wifi: mac80211: report all unusable beacon frames") Signed-off-by:
-
Johannes Berg authored
Add the local_state_change request to the deauth trace for easier debugging. Signed-off-by:
-
- 25 Sep, 2023 33 commits
-
-
Vinayak Yadawad authored
Introduce new feature flags for OWE offload that driver can advertise to indicate kernel/application space to avoid DH IE handling. When this flag is advertised, the driver/device will take care of DH IE inclusion and processing of peer DH IE to generate PMK. Signed-off-by:
Vinayak Yadawad <vinayak.yadawad@broadcom.com> Link: https://lore.kernel.org/r/f891cce4b52c939dfc6b71bb2f73e560e8cad287.1695374530.git.vinayak.yadawad@broadcom.comSigned-off-by:
-
Po-Hao Huang authored
Define UL-bandwidth values of trigger frame according to 802.11 std. Signed-off-by:
Po-Hao Huang <phhuang@realtek.com> Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Link: https://lore.kernel.org/r/20230925080902.51449-2-pkshih@realtek.comSigned-off-by:
-
Mukesh Sisodiya authored
Add the support for prph register RF details and map it to get the RF ID of NIC. Signed-off-by:
Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by:
Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230921110727.ccfc4868111f.I94dd75fc82443facf571f2fe8e23c50e9053a35a@changeidSigned-off-by:
-
Johannes Berg authored
The return value of this function is assigned, but then unused. Check for errors here. Signed-off-by:
-
Johannes Berg authored
Pull up the injection rate control one layer, and let it control the antenna settings as well. Since mac80211 has already checked that enough antennas are configured, and we only have two bits, it's enough to just copy the data over. Signed-off-by:
-
Johannes Berg authored
Refactor the injection and other frame TX rate handling to always return the injection rate directly, by factoring the legay rate portion out into a new function called in the two relevant places (injection and non-injection). Signed-off-by:
-
Johannes Berg authored
The register here is device specific, so we need to gate the reading/checking to apply only on AX210 family. Signed-off-by:
-
Johannes Berg authored
If the NIC is already dead, as detected by the transport then there's no point to try to grab the NIC access and time out, we can just fail fast. This may speed up recovery. Signed-off-by:
-
Yedidya Benshimol authored
This new version of wolan_info_notif supports the handling of bigtk during d3, this patch holds parsing of the new notif version, adding new keys and updating ipn of existing keys during the resume flow. Signed-off-by:
Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by:
-
Johannes Berg authored
There's a race with runtime PM getting enabled by userspace: - we rescan the PCI bus - this creates the new PCI device including its sysfs representation - udev sees the new device, and the (OS-specific?) scripting enables runtime PM by writing to power/control; this can happen _before_ the next step - this will runtime-suspend the device which saves the config space, including the BAR0 that wasn't assigned yet - the bus rescan assigns resources to the devices and writes them to the config space of the device (but not the runtime-pm saved copy) - the driver binds and this disallows runtime PM, so the device is resumed, restoring the (incomplete!) config space - the driver cannot work due to BAR0 not being configured Fixing the actual race is hard and deep in the PCI layer, though probably should be done for upstream as well; perhaps runtime PM should only be allowed after resource assignment, or some other TBD way. Work around this in the driver for now by simply (re-)assigning BAR0 when the driver initializes, if it's unset. Signed-off-by:
-
Anjaneyulu authored
China 2022 regulations are enabled by default. Disable only when disabled in BIOS or the firmware don't support this capability. If the firmware has this capability, read BIOS configuration data in function 4 using ACPI API and send GRP_REGULATORY_LARI_CONFIG_CHANGE_CMD to the firmware. Any error while reading BIOS data results in enablement of china 2022 regulations. Signed-off-by:
Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by:
-
Johannes Berg authored
During HW restart, STA link changes happen while the link-sta is already allocated (had been prior to the restart). Adjust the allocation and checks to handle that. Signed-off-by:
-
Johannes Berg authored
During HW restart in eSR, links allocated in a station and links active in the interface may differ. Use for_each_sta_active_link to capture this. Signed-off-by:
-
Emmanuel Grumbach authored
set_antenna() is supported only when the device is not started in mac80211 which translates to the firmware not being loaded in iwlwifi. The tricky part is that iwlwifi populates the sband data during its boot and doesn't touch this data afterwards, but if the antenna settings forbid MIMO, we need to update the sband data. Rework the nvm parsing code to allow to get an existing nvm_data and modify the sband with additional constraints (tx / rx chains masks). Suggested-by:
Ben Greear <greearb@candelatech.com> Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Benjamin Berg authored
Reject configuring a channel for MLO if either EHT is not supported or the BSS does not have the correct ML element. This avoids trying to do a multi-link association with a misconfigured AP. Signed-off-by:
Benjamin Berg <benjamin.berg@intel.com> Signed-off-by:
-
Benjamin Berg authored
With this cfg80211 can report the link that caused the error to userspace which is then able to react to it by e.g. removing the link from the association and retrying. Signed-off-by:
-
Benjamin Berg authored
When one of the links (other than the assoc_link) is misconfigured and cannot work the association will fail. However, userspace was not able to tell that the operation only failed because of a problem with one of the links. Fix this, by allowing the driver to set a per-link error code and reporting the (first) offending link by setting the bad_attr accordingly. This only allows us to report the first error, but that is sufficient for userspace to e.g. remove the offending link and retry. Signed-off-by:
-
Johannes Berg authored
Support antenna control for injection by parsing the antenna radiotap field (which may be presented multiple times) and telling the driver about the resulting antenna bitmap. Of course there's no guarantee the driver will actually honour this, just like any other injection control. If misconfigured, i.e. the injected HT/VHT MCS needs more chains than antennas are configured, the bitmap is reset to zero, indicating no selection. For now this is only set up for two anntenas so we keep more free bits, but that can be trivially extended if any driver implements support for it that can deal with hardware with more antennas. Signed-off-by:
-
Ayala Beker authored
Support handling of advertised TID-to-link mapping elements received in a beacon. These elements are used by AP MLD to disable specific links and force all clients to stop using these links. By default if no TID-to-link mapping is advertised, all TIDs shall be mapped to all links. Signed-off-by:
Ayala Beker <ayala.beker@intel.com> Signed-off-by:
-
Ayala Beker authored
Add the relevant definitions for TID to Link mapping element according to the P802.11be_D4.0. Signed-off-by:
-
Ilan Peer authored
In station mode, set the active links to all the usable links. Signed-off-by:
Ilan Peer <ilan.peer@intel.com> Signed-off-by:
-
Ilan Peer authored
Notify the low level driver when there is change in the valid links. Signed-off-by:
-
Johannes Berg authored
Move the description after the parameter section, to make the kernel-doc script in verbose mode happy about it. Signed-off-by:
-
Johannes Berg authored
Add descriptions for two return values for two functions that are missing them. Signed-off-by:
-
Johannes Berg authored
Describe the function return values in kernel-doc. Signed-off-by:
-
Johannes Berg authored
Since we only use this to protect the dereference and with STA mutex, we can also allow this with just RCU. Signed-off-by:
-
Johannes Berg authored
To iterate the vif links we don't necessarily need to be in an RCU critical section, it's also possible to hold the sdata/wdev mutex. Annotate for_each_vif_active_link() accordingly. Signed-off-by:
-
Ayala Beker authored
Connection to an AP that is running a CSA flow may end up with a failure as the AP might change its channel during the connection flow while we do not track the channel change yet. Avoid that by rejecting a connection to such an AP. Signed-off-by:
-
Emmanuel Grumbach authored
rx_chains was set only upon registration and it we rely on it for the active chains upon SMPS configuration after association. When we use the set_antenna() API to limit the rx_chains from 2 to 1, this caused issues with iwlwifi since we still had 2 active_chains requested. Signed-off-by:
-
Johannes Berg authored
In CSA, parse the (EHT) bandwidth indication element and use it (in fact prefer it if present). Signed-off-by:
-
Johannes Berg authored
Using the full struct cfg80211_ap_settings for an update is misleading, since most settings cannot be updated. Split the update case off into a new struct cfg80211_ap_update. Change-Id: I3ba4dd9280938ab41252f145227a7005edf327e4 Signed-off-by: -
Johannes Berg authored
Drivers should really be able to rely on the wiphy mutex being held all the time, unless otherwise documented. For ethtool, that wasn't quite right. Fix and clarify this in both code and documentation. Reported-by: syzbot+c12a771b218dcbba32e1@syzkaller.appspotmail.com Fixes: 0e8185ce ("wifi: mac80211: check wiphy mutex in ops") Signed-off-by:
-
Colin Ian King authored
Don't populate the read-only array lanes on the stack, instead make it static const. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20230919095205.24949-1-colin.i.king@gmail.comSigned-off-by:
-
- 22 Sep, 2023 2 commits
-
-
Zong-Zhe Yang authored
The following FW elements are recognized, and then the valid entries in them are loaded into SW struct case by case. * TX power by rate * TX power limit 2 GHz * TX power limit 5 GHz * TX power limit 6 GHz * TX power limit RU 2 GHz * TX power limit RU 5 GHz * TX power limit RU 6 GHz * TX shape limit * TX shape limit RU One single firmware file can contain multiples of each of the above FW elements. Each of them is configured with a target RFE (RF front end) type. We choose one of the multiples to load based on RFE type. If there are multiples of the same FW elements with the same target RFE type. The last one will be applied. We don't want to have many loading variants for above FW elements. Even if between different chips or between different generations, we would like to maintain only one single set of loadings. So, the loadings are designed to consider compatibility. The main concepts are listed below. * The driver structures, which are used to cast binary entry from FW, cannot insert new members in the middle. If there are something new, they should always be appended at the tail. * Each binary entry from FW uses a dictionary way containing a key set and a data. The keys in the key set indicate where to put the data. * If size of driver struct and size of binary entry do not match when loading, it means the number of keys in the key set are different. Then, we deal with compatibility. No matter which one has more keys, we take/use zero on those mismatched keys. If driver struct is bigger (backward compatibility): e.g. SW uses two keys, but FW is built with one key. Then, put the data of FW(keyX) into SW[keyX][0]. If binary entry is bigger (forward compatibility): e.g. FW is built with two keys, but SW uses one key. Then, only take the data of FW(keyX, keyY = 0) into SW[keyX] Besides, chip info setup flow is tweaked a bit for the following. * Before loading FW elements, we need to determine chip RFE via efuse. * Setting up RFE parameters depends on loading FW elements ahead. Signed-off-by:
Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by:
Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230920074322.42898-8-pkshih@realtek.com
-
Zong-Zhe Yang authored
The following are introduced for Wi-Fi 7 chips. 1. take BW/OFDMA into account on TX power by rate 2. increase TX power offset types up to EHT 3. split TX shape into tx_shape_lmt and tx_shape_lmt_ru If functions which are only for AX, they always access TX power by rate with BW/OFDMA = 0/0, and they don't access tx_shape's lmt_ru section. Signed-off-by:
-
