- 17 Sep, 2012 7 commits
-
-
Konrad Rzeszutek Wilk authored
arch/x86/xen/pci-swiotlb-xen.c:96:1: warning: Using plain integer as NULL pointer arch/x86/xen/pci-swiotlb-xen.c:96:1: warning: Using plain integer as NULL pointer Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
Konrad Rzeszutek Wilk authored
Sparse warns us off: drivers/xen/swiotlb-xen.c:506:1: warning: symbol 'xen_swiotlb_map_sg' was not declared. Should it be static? drivers/xen/swiotlb-xen.c:534:1: warning: symbol 'xen_swiotlb_unmap_sg' was not declared. Should it be static? and it looks like we do not need this function at all. Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
Konrad Rzeszutek Wilk authored
We piggyback on "xen/swiotlb: Use the swiotlb_late_init_with_tbl to init Xen-SWIOTLB late when PV PCI is used." functionality to start up the Xen-SWIOTLB if we are hot-plugged. This allows us to bypass the need to supply 'iommu=soft' on the Linux command line (mostly). With this patch, if a user forgot 'iommu=soft' on the command line, and hotplug a PCI device they will get: pcifront pci-0: Installing PCI frontend Warning: only able to allocate 4 MB for software IO TLB software IO TLB [mem 0x2a000000-0x2a3fffff] (4MB) mapped at [ffff88002a000000-ffff88002a3fffff] pcifront pci-0: Creating PCI Frontend Bus 0000:00 pcifront pci-0: PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0xffff] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff] pci 0000:00:00.0: [8086:10d3] type 00 class 0x020000 pci 0000:00:00.0: reg 10: [mem 0xfe5c0000-0xfe5dffff] pci 0000:00:00.0: reg 14: [mem 0xfe500000-0xfe57ffff] pci 0000:00:00.0: reg 18: [io 0xe000-0xe01f] pci 0000:00:00.0: reg 1c: [mem 0xfe5e0000-0xfe5e3fff] pcifront pci-0: claiming resource 0000:00:00.0/0 pcifront pci-0: claiming resource 0000:00:00.0/1 pcifront pci-0: claiming resource 0000:00:00.0/2 pcifront pci-0: claiming resource 0000:00:00.0/3 e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k e1000e: Copyright(c) 1999 - 2012 Intel Corporation. e1000e 0000:00:00.0: Disabling ASPM L0s L1 e1000e 0000:00:00.0: enabling device (0000 -> 0002) e1000e 0000:00:00.0: Xen PCI mapped GSI16 to IRQ34 e1000e 0000:00:00.0: (unregistered net_device): Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode e1000e 0000:00:00.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:1b:21:ab:c6:13 e1000e 0000:00:00.0: eth0: Intel(R) PRO/1000 Network Connection e1000e 0000:00:00.0: eth0: MAC: 3, PHY: 8, PBA No: E46981-005 The "Warning only" will go away if one supplies 'iommu=soft' instead as we have a higher chance of being able to allocate large swaths of memory. Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
Konrad Rzeszutek Wilk authored
If everything is setup properly we would return -ENOMEM since rc by default is set to that value. Lets not do that and return a proper return code. Note: The reason the early code needs this special treatment is that it SWIOTLB library call does not return anything (and had it failed it would call panic()) - but our function does. Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
Konrad Rzeszutek Wilk authored
With this patch we provide the functionality to initialize the Xen-SWIOTLB late in the bootup cycle - specifically for Xen PCI-frontend. We still will work if the user had supplied 'iommu=soft' on the Linux command line. Note: We cannot depend on after_bootmem to automatically determine whether this is early or not. This is because when PCI IOMMUs are initialized it is after after_bootmem but before a lot of "other" subsystems are initialized. CC: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> [v1: Fix smatch warnings] [v2: Added check for xen_swiotlb] [v3: Rebased with new xen-swiotlb changes] [v4: squashed xen/swiotlb: Depending on after_bootmem is not correct in] Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
Konrad Rzeszutek Wilk authored
That way we can more easily reuse those errors when using the late SWIOTLB init. Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
Konrad Rzeszutek Wilk authored
Moving the function out of the way to prepare for the late SWIOTLB init. Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 21 Aug, 2012 3 commits
-
-
Konrad Rzeszutek Wilk authored
This enables the caller to initialize swiotlb with its own iotlb memory late in the bootup. See git commit eb605a57 "swiotlb: add swiotlb_tbl_map_single library function" which will explain the full details of what it can be used for. CC: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> [v1: Fold in smatch warning] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
Konrad Rzeszutek Wilk authored
If a PV guest is booted the native SWIOTLB should not be turned on. It does not help us (we don't have any PCI devices) and it eats 64MB of good memory. In the case of PV guests with PCI devices we need the Xen-SWIOTLB one. [v1: Rewrite comment per Stefano's suggestion] Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
Konrad Rzeszutek Wilk authored
Its pretty easy: 1). We only check to see if we need Xen SWIOTLB for PV guests. 2). If swiotlb=force or iommu=soft is set, then Xen SWIOTLB will be enabled. 3). If it is an initial domain, then Xen SWIOTLB will be enabled. 4). Native SWIOTLB must be disabled for PV guests. Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 21 Jul, 2012 7 commits
-
-
Linus Torvalds authored
-
Rafael J. Wysocki authored
The SYSTEM_SUSPEND_DISK system state is never used, so drop it. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge emailed kgdb dmesg fixups patches from Anton Vorontsov: "The dmesg command appears to be broken after the printk rework. The old logic in the kdb code makes no sense in terms of current printk/logging storage format, and KDB simply hangs forever upon entering 'dmesg' command. The first patch revives the command by switching to kmsg_dumper iterator. As a side-effect, the code is now much more simpler. A few changes were needed in the printk.c: we needed unlocked variant of the kmsg_dumper iterator, but these can surely wait for 3.6. It's probably too late even for the first patch to go to 3.5, but I'll try to convince otherwise. :-) Here we go: - The current code is broken for sure, and has no hope to work at all. It is a regression - The new code works for me, and probably works for everyone else; - If it compiles (and I urge everyone to compile-test it on your setup), it hardly can make things worse." * Merge emailed patches from Anton Vorontsov: (4 commits) kdb: Switch to nolock variants of kmsg_dump functions printk: Implement some unlocked kmsg_dump functions printk: Remove kdb_syslog_data kdb: Revive dmesg command
-
Anton Vorontsov authored
The locked variants are prone to deadlocks (suppose we got to the debugger w/ the logbuf lock held), so let's switch to nolock variants. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Anton Vorontsov authored
If used from KDB, the locked variants are prone to deadlocks (suppose we got to the debugger w/ the logbuf lock held). So, we have to implement a few routines that grab no logbuf lock. Yet we don't need these functions in modules, so we don't export them. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Anton Vorontsov authored
The function is no longer needed, so remove it. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Anton Vorontsov authored
The kgdb dmesg command is broken after the printk rework. The old logic in kdb code makes no sense in terms of current printk/logging storage format, and KDB simply hangs forever. This patch revives the command by switching to kmsg_dumper iterator. The code is now much more simpler and shorter. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 20 Jul, 2012 13 commits
-
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull late MIPS fixes from Ralf Baechle: "This fixes a number of lose ends in the MIPS code and various bug fixes. Aside of dropping some patch that should not be in this pull request everything has sat in -next for quite a while and there are no known issues. The biggest patch in this patch set moves the allocation of an array that is aliased to a function (for runtime generated code) to assembler code. This avoids an issue with certain toolchains when building for microMIPS." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (35 commits) MIPS: PCI: Move fixups from __init to __devinit. MIPS: Fix bug.h MIPS build regression MIPS: sync-r4k: remove redundant irq operation MIPS: smp: Warn on too early irq enable MIPS: call set_cpu_online() on cpu being brought up with irq disabled MIPS: call ->smp_finish() a little late MIPS: Yosemite: delay irq enable to ->smp_finish() MIPS: SMTC: delay irq enable to ->smp_finish() MIPS: BMIPS: delay irq enable to ->smp_finish() MIPS: Octeon: delay enable irq to ->smp_finish() MIPS: Oprofile: Fix build as a module. MIPS: BCM63XX: Fix BCM6368 IPSec clock bit MIPS: perf: Fix build error caused by unused counters_per_cpu_to_total() MIPS: Fix Magic SysRq L kernel crash. MIPS: BMIPS: Fix duplicate header inclusion. mips: mark const init data with __initconst instead of __initdata MIPS: cmpxchg.h: Add missing include MIPS: Malta may also be equipped with MIPS64 R2 processors. MIPS: Fix typo multipy -> multiply MIPS: Cavium: Fix duplicate ARCH_SPARSEMEM_ENABLE in kconfig. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dmLinus Torvalds authored
Pull device-mapper discard fixes from Alasdair G Kergon: - avoid a crash in dm-raid1 when discards coincide with mirror recovery; - avoid discarding shared data that's still needed in dm-thin; - don't guarantee that discarded blocks will be wiped in dm-raid1. * tag 'dm-3.5-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm: dm raid1: set discard_zeroes_data_unsupported dm thin: do not send discards to shared blocks dm raid1: fix crash with mirror recovery and discard
-
git://git.open-osd.org/linux-open-osdLinus Torvalds authored
Pull pnfs/ore fixes from Boaz Harrosh: "These are catastrophic fixes to the pnfs objects-layout that were just discovered. They are also destined for @stable. I have found these and worked on them at around RC1 time but unfortunately went to the hospital for kidney stones and had a very slow recovery. I refrained from sending them as is, before proper testing, and surly I have found a bug just yesterday. So now they are all well tested, and have my sign-off. Other then fixing the problem at hand, and assuming there are no bugs at the new code, there is low risk to any surrounding code. And in anyway they affect only these paths that are now broken. That is RAID5 in pnfs objects-layout code. It does also affect exofs (which was not broken) but I have tested exofs and it is lower priority then objects-layout because no one is using exofs, but objects-layout has lots of users." * 'for-linus' of git://git.open-osd.org/linux-open-osd: pnfs-obj: Fix __r4w_get_page when offset is beyond i_size pnfs-obj: don't leak objio_state if ore_write/read fails ore: Unlock r4w pages in exact reverse order of locking ore: Remove support of partial IO request (NFS crash) ore: Fix NFS crash by supporting any unaligned RAID IO
-
git://git.infradead.org/linux-ubifsLinus Torvalds authored
Pull UBIFS free space fix-up bugfix from Artem Bityutskiy: "It's been reported already twice recently: http://lists.infradead.org/pipermail/linux-mtd/2012-May/041408.html http://lists.infradead.org/pipermail/linux-mtd/2012-June/042422.html and we finally have the fix. I am quite confident the fix is correct because I could reproduce the problem with nandsim and verify the fix. It was also verified by Iwo (the reporter). I am also confident that this is OK to merge the fix so late because this patch affects only the fixup functionality, which is not used by most users." * tag 'upstream-3.5-rc8' of git://git.infradead.org/linux-ubifs: UBIFS: fix a bug in empty space fix-up
-
Mikulas Patocka authored
We can't guarantee that REQ_DISCARD on dm-mirror zeroes the data even if the underlying disks support zero on discard. So this patch sets ti->discard_zeroes_data_unsupported. For example, if the mirror is in the process of resynchronizing, it may happen that kcopyd reads a piece of data, then discard is sent on the same area and then kcopyd writes the piece of data to another leg. Consequently, the data is not zeroed. The flag was made available by commit 983c7db3 (dm crypt: always disable discard_zeroes_data). Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@kernel.org Signed-off-by: Alasdair G Kergon <agk@redhat.com>
-
Mikulas Patocka authored
When process_discard receives a partial discard that doesn't cover a full block, it sends this discard down to that block. Unfortunately, the block can be shared and the discard would corrupt the other snapshots sharing this block. This patch detects block sharing and ends the discard with success when sending it to the shared block. The above change means that if the device supports discard it can't be guaranteed that a discard request zeroes data. Therefore, we set ti->discard_zeroes_data_unsupported. Thin target discard support with this bug arrived in commit 104655fd (dm thin: support discards). Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
-
Mikulas Patocka authored
This patch fixes a crash when a discard request is sent during mirror recovery. Firstly, some background. Generally, the following sequence happens during mirror synchronization: - function do_recovery is called - do_recovery calls dm_rh_recovery_prepare - dm_rh_recovery_prepare uses a semaphore to limit the number simultaneously recovered regions (by default the semaphore value is 1, so only one region at a time is recovered) - dm_rh_recovery_prepare calls __rh_recovery_prepare, __rh_recovery_prepare asks the log driver for the next region to recover. Then, it sets the region state to DM_RH_RECOVERING. If there are no pending I/Os on this region, the region is added to quiesced_regions list. If there are pending I/Os, the region is not added to any list. It is added to the quiesced_regions list later (by dm_rh_dec function) when all I/Os finish. - when the region is on quiesced_regions list, there are no I/Os in flight on this region. The region is popped from the list in dm_rh_recovery_start function. Then, a kcopyd job is started in the recover function. - when the kcopyd job finishes, recovery_complete is called. It calls dm_rh_recovery_end. dm_rh_recovery_end adds the region to recovered_regions or failed_recovered_regions list (depending on whether the copy operation was successful or not). The above mechanism assumes that if the region is in DM_RH_RECOVERING state, no new I/Os are started on this region. When I/O is started, dm_rh_inc_pending is called, which increases reg->pending count. When I/O is finished, dm_rh_dec is called. It decreases reg->pending count. If the count is zero and the region was in DM_RH_RECOVERING state, dm_rh_dec adds it to the quiesced_regions list. Consequently, if we call dm_rh_inc_pending/dm_rh_dec while the region is in DM_RH_RECOVERING state, it could be added to quiesced_regions list multiple times or it could be added to this list when kcopyd is copying data (it is assumed that the region is not on any list while kcopyd does its jobs). This results in memory corruption and crash. There already exist bypasses for REQ_FLUSH requests: REQ_FLUSH requests do not belong to any region, so they are always added to the sync list in do_writes. dm_rh_inc_pending does not increase count for REQ_FLUSH requests. In mirror_end_io, dm_rh_dec is never called for REQ_FLUSH requests. These bypasses avoid the crash possibility described above. These bypasses were improperly implemented for REQ_DISCARD when the mirror target gained discard support in commit 5fc2ffea (dm raid1: support discard). In do_writes, REQ_DISCARD requests is always added to the sync queue and immediately dispatched (even if the region is in DM_RH_RECOVERING). However, dm_rh_inc and dm_rh_dec is called for REQ_DISCARD resusts. So it violates the rule that no I/Os are started on DM_RH_RECOVERING regions, and causes the list corruption described above. This patch changes it so that REQ_DISCARD requests follow the same path as REQ_FLUSH. This avoids the crash. Reference: https://bugzilla.redhat.com/837607Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@kernel.org Signed-off-by: Alasdair G Kergon <agk@redhat.com>
-
Boaz Harrosh authored
It is very common for the end of the file to be unaligned on stripe size. But since we know it's beyond file's end then the XOR should be preformed with all zeros. Old code used to just read zeros out of the OSD devices, which is a great waist. But what scares me more about this situation is that, we now have pages attached to the file's mapping that are beyond i_size. I don't like the kind of bugs this calls for. Fix both birds, by returning a global zero_page, if offset is beyond i_size. TODO: Change the API to ->__r4w_get_page() so a NULL can be returned without being considered as error, since XOR API treats NULL entries as zero_pages. [Bug since 3.2. Should apply the same way to all Kernels since] CC: Stable Tree <stable@kernel.org> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
-
Boaz Harrosh authored
[Bug since 3.2 Kernel] CC: Stable Tree <stable@kernel.org> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
-
Boaz Harrosh authored
The read-4-write pages are locked in address ascending order. But where unlocked in a way easiest for coding. Fix that, locks should be released in opposite order of locking, .i.e descending address order. I have not hit this dead-lock. It was found by inspecting the dbug print-outs. I suspect there is an higher lock at caller that protects us, but fix it regardless. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
-
Boaz Harrosh authored
Do to OOM situations the ore might fail to allocate all resources needed for IO of the full request. If some progress was possible it would proceed with a partial/short request, for the sake of forward progress. Since this crashes NFS-core and exofs is just fine without it just remove this contraption, and fail. TODO: Support real forward progress with some reserved allocations of resources, such as mem pools and/or bio_sets [Bug since 3.2 Kernel] CC: Stable Tree <stable@kernel.org> CC: Benny Halevy <bhalevy@tonian.com> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
-
Boaz Harrosh authored
In RAID_5/6 We used to not permit an IO that it's end byte is not stripe_size aligned and spans more than one stripe. .i.e the caller must check if after submission the actual transferred bytes is shorter, and would need to resubmit a new IO with the remainder. Exofs supports this, and NFS was supposed to support this as well with it's short write mechanism. But late testing has exposed a CRASH when this is used with none-RPC layout-drivers. The change at NFS is deep and risky, in it's place the fix at ORE to lift the limitation is actually clean and simple. So here it is below. The principal here is that in the case of unaligned IO on both ends, beginning and end, we will send two read requests one like old code, before the calculation of the first stripe, and also a new site, before the calculation of the last stripe. If any "boundary" is aligned or the complete IO is within a single stripe. we do a single read like before. The code is clean and simple by splitting the old _read_4_write into 3 even parts: 1._read_4_write_first_stripe 2. _read_4_write_last_stripe 3. _read_4_write_execute And calling 1+3 at the same place as before. 2+3 before last stripe, and in the case of all in a single stripe then 1+2+3 is preformed additively. Why did I not think of it before. Well I had a strike of genius because I have stared at this code for 2 years, and did not find this simple solution, til today. Not that I did not try. This solution is much better for NFS than the previous supposedly solution because the short write was dealt with out-of-band after IO_done, which would cause for a seeky IO pattern where as in here we execute in order. At both solutions we do 2 separate reads, only here we do it within a single IO request. (And actually combine two writes into a single submission) NFS/exofs code need not change since the ORE API communicates the new shorter length on return, what will happen is that this case would not occur anymore. hurray!! [Stable this is an NFS bug since 3.2 Kernel should apply cleanly] CC: Stable Tree <stable@kernel.org> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
-
Artem Bityutskiy authored
UBIFS has a feature called "empty space fix-up" which is a quirk to work-around limitations of dumb flasher programs. Namely, of those flashers that are unable to skip NAND pages full of 0xFFs while flashing, resulting in empty space at the end of half-filled eraseblocks to be unusable for UBIFS. This feature is relatively new (introduced in v3.0). The fix-up routine (fixup_free_space()) is executed only once at the very first mount if the superblock has the 'space_fixup' flag set (can be done with -F option of mkfs.ubifs). It basically reads all the UBIFS data and metadata and writes it back to the same LEB. The routine assumes the image is pristine and does not have anything in the journal. There was a bug in 'fixup_free_space()' where it fixed up the log incorrectly. All but one LEB of the log of a pristine file-system are empty. And one contains just a commit start node. And 'fixup_free_space()' just unmapped this LEB, which resulted in wiping the commit start node. As a result, some users were unable to mount the file-system next time with the following symptom: UBIFS error (pid 1): replay_log_leb: first log node at LEB 3:0 is not CS node UBIFS error (pid 1): replay_log_leb: log error detected while replaying the log at LEB 3:0 The root-cause of this bug was that 'fixup_free_space()' wrongly assumed that the beginning of empty space in the log head (c->lhead_offs) was known on mount. However, it is not the case - it was always 0. UBIFS does not store in it the master node and finds out by scanning the log on every mount. The fix is simple - just pass commit start node size instead of 0 to 'fixup_leb()'. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Cc: stable@vger.kernel.org [v3.0+] Reported-by: Iwo Mergler <Iwo.Mergler@netcommwireless.com> Tested-by: Iwo Mergler <Iwo.Mergler@netcommwireless.com> Reported-by: James Nute <newten82@gmail.com>
-
- 19 Jul, 2012 10 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds authored
Pull last minute Ceph fixes from Sage Weil: "The important one fixes a bug in the socket failure handling behavior that was turned up in some recent failure injection testing. The other two are minor bug fixes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: rbd: endian bug in rbd_req_cb() rbd: Fix ceph_snap_context size calculation libceph: fix messenger retry
-
git://neil.brown.name/mdLinus Torvalds authored
Pull three md bugfixes from NeilBrown: "One of the bugs was introduced in 3.5-rc1. Others have been there for longer." * tag 'md-3.5-fixes' of git://neil.brown.name/md: md/raid1: close some possible races on write errors during resync md: avoid crash when stopping md array races with closing other open fds. md: fix bug in handling of new_data_offset
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking changes from David Miller: "Ok, we should be good to go now" 1) We have to statically initialize the init_net device list head rather than do so in an initcall, otherwise netprio_cgroup crashes if it's built statically rather than modular (Mark D. Rustad) 2) Fix SKB null oopser in CIPSO ipv4 option processing (Paul Moore) 3) Qlogic maintainers update (Anirban Chakraborty) * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: Statically initialize init_net.dev_base_head MAINTAINERS: Changes in qlcnic and qlge maintainers list cipso: don't follow a NULL pointer when setsockopt() is called
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds authored
Pull HID update from Jiri Kosina: "A final round of changes for HID for 3.5: just device ID additions." * 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: hid-multitouch: add support for Zytronic panels HID: add Sennheiser BTD500USB device support HID: add battery quirk for Apple Wireless ANSI
-
Ezequiel Garcia authored
The strcpy was being used to set the name of the board. Since the destination char* was read-only and the name is set statically at compile time; this was both wrong and redundant. The type of char* is changed to const char* to prevent future errors. Reported-by: Radek Masin <radek@masin.eu> Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> [ Taking directly due to vacations - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Benjamin Tissoires authored
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
-
Sebastian Andrzej Siewior authored
Fixups are executed once the pci-device is found which is during boot process so __init seems fine as long as the platform does not support hotplug. However it is possible to remove the PCI bus at run time and have it rediscovered again via "echo 1 > /sys/bus/pci/rescan" and this will call the fixups again. [ralf@linux-mips.org: Made piixirqmap[] in malta_piix_func0_fixup() __initdata.] Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Yoichi Yuasa authored
Commit: 37778088 [bug.h: need linux/kernel.h for TAINT_WARN.] breaks all MIPS builds. CC arch/mips/kernel/machine_kexec.o In file included from include/linux/kernel.h:20:0, from include/asm-generic/bug.h:35, from /home/yuasa/src/linux/kernel/git/linux-2.6/arch/mips/include/asm/bug.h:41, from /home/yuasa/src/linux/kernel/git/linux-2.6/arch/mips/include/asm/bitops.h:20, from include/linux/bitops.h:22, from include/linux/signal.h:38, from include/linux/elfcore.h:5, from include/linux/kexec.h:60, from arch/mips/kernel/machine_kexec.c:9: include/linux/log2.h: In function '__ilog2_u32': include/linux/log2.h:34:2: error: implicit declaration of function 'fls' [-Werror=implicit-function-declaration] include/linux/log2.h: In function '__ilog2_u64': include/linux/log2.h:42:2: error: implicit declaration of function 'fls64' [-Werror=implicit-function-declaration] include/linux/log2.h: In function '__roundup_pow_of_two': include/linux/log2.h:63:2: error: implicit declaration of function 'fls_long' [-Werror=implicit-function-declaration] In file included from include/linux/bitops.h:22:0, from include/linux/signal.h:38, from include/linux/elfcore.h:5, from include/linux/kexec.h:60, from arch/mips/kernel/machine_kexec.c:9: /home/yuasa/src/linux/kernel/git/linux-2.6/arch/mips/include/asm/bitops.h: At top level: /home/yuasa/src/linux/kernel/git/linux-2.6/arch/mips/include/asm/bitops.h:615:19: error: static declaration of 'fls' follows non-static declaration include/linux/log2.h:34:9: note: previous implicit declaration of 'fls' was here In file included from /home/yuasa/src/linux/kernel/git/linux-2.6/arch/mips/include/asm/bitops.h:651:0, from include/linux/bitops.h:22, from include/linux/signal.h:38, from include/linux/elfcore.h:5, from include/linux/kexec.h:60, from arch/mips/kernel/machine_kexec.c:9: include/asm-generic/bitops/fls64.h:18:28: error: static declaration of 'fls64' follows non-static declaration include/linux/log2.h:42:9: note: previous implicit declaration of 'fls64' was here In file included from include/linux/signal.h:38:0, from include/linux/elfcore.h:5, from include/linux/kexec.h:60, from arch/mips/kernel/machine_kexec.c:9: include/linux/bitops.h:160:24: error: conflicting types for 'fls_long' include/linux/log2.h:63:16: note: previous implicit declaration of 'fls_long' was here cc1: all warnings being treated as errors make[2]: *** [arch/mips/kernel/machine_kexec.o] Error 1 Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: yuasa@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Linuxppc-dev <linuxppc-dev@ozlabs.org> Cc: Linux MIPS Mailing List <linux-mips@linux-mips.org> Cc: Linux-sh list <linux-sh@vger.kernel.org> Cc: Chris Zankel <chris@zankel.net> Patchwork: https://patchwork.linux-mips.org/patch/4000/Tested-by: John Crispin <blogic@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Yong Zhang authored
Since we have delayed irq enabling to ->smp_finish() Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Cc: Sergei Shtylyov <sshtylyov@mvista.com> Cc: David Daney <david.daney@cavium.com> Acked-by: David Daney <david.daney@cavium.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Yong Zhang authored
Just to catch a potential issue. Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Cc: Sergei Shtylyov <sshtylyov@mvista.com> Cc: David Daney <david.daney@cavium.com> Acked-by: David Daney <david.daney@cavium.com> Patchwork: https://patchwork.linux-mips.org/patch/3852/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-