- 08 Feb, 2022 7 commits
-
-
Gilbert Wu authored
Add device attribute 'sas_ncq_prio_enable' to enable SATA NCQ priority support and provide I/O priority in SCSI command and pass priority information to controller firmware. This device attribute works only when device has NCQ priority support and controller firmware can handle I/Os with NCQ priority attribute. Link: https://lore.kernel.org/r/164375208306.440833.7392577382127815362.stgit@brunhilda.pdev.netReviewed-by:
Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by:
Scott Teel <scott.teel@microchip.com> Signed-off-by:
Gilbert Wu <Gilbert.Wu@microchip.com> Signed-off-by:
Don Brace <don.brace@microchip.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Don Brace authored
Add in new ZTE controllers: VID / DID / SVID / SDID ---- ---- ---- ---- ZTE SmartROC3100 RS241-18i 2G 9005 / 028F / 1CF2 / 5449 ZTE SmartROC3100 RS242-18i 4G 9005 / 028F / 1CF2 / 544A ZTE SmartIOC2100 RS243-18i 9005 / 028F / 1CF2 / 544B ZTE SmartROC3100 RM241B-18i 2G 9005 / 028F / 1CF2 / 544D ZTE SmartROC3100 RM242B-18i 4G 9005 / 028F / 1CF2 / 544E ZTE SmartIOC2100 RM243B-18i 9005 / 028F / 1CF2 / 544F Add PCI ID for 1100-24i controller: VID / DID / SVID / SDID ---- ---- ---- ---- HBA 1100-24i 9005 / 028F / 9005 / 1304 Add PCI IDs for HPE and Adaptec devices: VID / DID / SVID / SDID ---- ---- ---- ---- Adaptec Smart HBA 2200-8io /e 9005 / 028F / 9005 / 1463 Adaptec Smart HBA 2200-16io /e 9005 / 028F / 9005 / 14C2 HPE SR308i-p Gen11 9005 / 028F / 1590 / 0382 HPE SR308i-o Gen11 9005 / 028F / 1590 / 0383 HPE SR932i-p Gen11 9005 / 028F / 1590 / 0381 Add PCI IDs for Inspur controllers: VID / DID / SVID / SDID ---- ---- ---- ---- INSPUR RS0800M5H24i 9005 / 028F / 1BD4 / 006B INSPUR RS0800M5E8I 9005 / 028F / 1BD4 / 006C INSPUR RS0800M5H8I 9005 / 028F / 1BD4 / 006D INSPUR RS0804M5R16i 9005 / 028F / 1BD4 / 006F INSPUR RS0800M5E16i 9005 / 028F / 1BD4 / 0070 INSPUR RS0800M5H16i 9005 / 028F / 1BD4 / 0071 INSPUR RS0800M5E16i 9005 / 028F / 1BD4 / 0072 NT RAID 3100-24i 9005 / 028F / 1F0C / 3161 Add HPE and Adaptec OROC PCI IDs: VID / DID / SVID / SDID ---- ---- ---- ---- HPE SR216i-o Gen11 9005 / 028F / 9005 / 036F Adaptec SmartRAID 3284-16io /e/uC 9005 / 028F / 9005 / 1473 Adaptec SmartRAID 3254-16io /e 9005 / 028F / 9005 / 1474 Add PCI IDs for new channel controllers: VID / DID / SVID / SDID ---- ---- ---- ---- Adaptec SmartRAID 3254-8i /e 9005 / 028F / 9005 / 14A4 Adaptec SmartRAID 3252-8i /e 9005 / 028F / 9005 / 14A5 Adaptec SmartRAID 3204-8i /e 9005 / 028F / 9005 / 14A6 Align PCI IDs with OOB driver. Easier to check for differences. Link: https://lore.kernel.org/r/164375207802.440833.15947108153078495425.stgit@brunhilda.pdev.netReviewed-by:Scott Benesh <scott.benesh@microchip.com> Reviewed-by:
Murthy Bhat <Murthy.Bhat@microchip.com> Signed-off-by:
Sagar Biradar <sagar.biradar@microchip.com> Signed-off-by:
-
Don Brace authored
Prevent "BUG: scheduling while atomic: rmmod" stack trace. Stop setting spin_locks before calling OS functions to remove devices. Link: https://lore.kernel.org/r/164375207296.440833.4996145011193819683.stgit@brunhilda.pdev.netReviewed-by:
Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by:
-
Kees Cook authored
This converts to a flexible array instead of the old-style 1-element arrays. The existing code already did the correct math for finding the size of the resulting flexible array structure, so there is no binary difference. The other two structures converted to use flexible arrays appear to have no users at all. Link: https://lore.kernel.org/r/20220201223948.1455637-1-keescook@chromium.orgSigned-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Sebastian Andrzej Siewior authored
The USB storage driver can complete its requests directly from a kernel thread. Use scsi_done_direct() to avoid waking ksoftirqd. Link: https://lore.kernel.org/r/20220201210954.570896-3-sebastian@breakpoint.ccSigned-off-by:
Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Signed-off-by:
-
Sebastian Andrzej Siewior authored
Add scsi_done_direct() which behaves like scsi_done() except that it invokes blk_mq_complete_request_direct() in order to complete the request. Callers from process context can complete the request directly instead waking ksoftirqd. Link: https://lore.kernel.org/r/Yfw7JaszshmfYa1d@flowReviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
Martin Wilck authored
If a SCSI device handler module is loaded after some SCSI devices have already been probed (e.g. via request_module() by dm-multipath), the "access_state" and "preferred_path" sysfs attributes remain invisible for these devices, although the handler is attached and live. The reason is that the visibility is only checked when the sysfs attribute group is first created. This results in an inconsistent user experience depending on the load order of SCSI low-level drivers vs. device handler modules. This patch changes user space API: attempting to read the "access_state" or "preferred_path" attributes will now result in -EINVAL rather than -ENODEV for devices that have no device handler, and tests for the existence of these attributes will have a different result. Link: https://lore.kernel.org/r/20220127141351.30706-1-mwilck@suse.comReviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
Martin Wilck <mwilck@suse.com> Signed-off-by:
-
- 31 Jan, 2022 7 commits
-
-
Minghao Chi (CGEL ZTE) authored
destroy_workqueue() already drains the queue before destroying it, so there is no need to flush it explicitly. Remove the redundant flush_workqueue() call. Link: https://lore.kernel.org/r/20220127014330.1185114-1-chi.minghao@zte.com.cnReported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn> Signed-off-by:
CGEL ZTE <cgel.zte@gmail.com> Signed-off-by:
-
Minghao Chi (CGEL ZTE) authored
destroy_workqueue() already drains the queue before destroying it, so there is no need to flush it explicitly. Remove the redundant flush_workqueue() calls. Link: https://lore.kernel.org/r/20220127013934.1184923-1-chi.minghao@zte.com.cnReported-by:
-
Yang Guang authored
coccinelle report: ./drivers/scsi/bfa/bfad_attr.c:908:8-16: WARNING: use scnprintf or sprintf ./drivers/scsi/bfa/bfad_attr.c:860:8-16: WARNING: use scnprintf or sprintf ./drivers/scsi/bfa/bfad_attr.c:888:8-16: WARNING: use scnprintf or sprintf ./drivers/scsi/bfa/bfad_attr.c:853:8-16: WARNING: use scnprintf or sprintf ./drivers/scsi/bfa/bfad_attr.c:808:8-16: WARNING: use scnprintf or sprintf ./drivers/scsi/bfa/bfad_attr.c:728:8-16: WARNING: use scnprintf or sprintf ./drivers/scsi/bfa/bfad_attr.c:822:8-16: WARNING: use scnprintf or sprintf ./drivers/scsi/bfa/bfad_attr.c:927:9-17: WARNING: use scnprintf or sprintf ./drivers/scsi/bfa/bfad_attr.c:900:8-16: WARNING: use scnprintf or sprintf ./drivers/scsi/bfa/bfad_attr.c:874:8-16: WARNING: use scnprintf or sprintf ./drivers/scsi/bfa/bfad_attr.c:714:8-16: WARNING: use scnprintf or sprintf ./drivers/scsi/bfa/bfad_attr.c:839:8-16: WARNING: use scnprintf or sprintf Use sysfs_emit() instead of scnprintf() or sprintf(). Link: https://lore.kernel.org/r/def83ff75faec64ba592b867a8499b1367bae303.1643181468.git.yang.guang5@zte.com.cnReported-by:
Yang Guang <yang.guang5@zte.com.cn> Signed-off-by:
David Yang <davidcomponentone@gmail.com> Signed-off-by:
-
Yang Guang authored
coccinelle report: ./drivers/scsi/mvsas/mv_init.c:699:8-16: WARNING: use scnprintf or sprintf ./drivers/scsi/mvsas/mv_init.c:747:8-16: WARNING: use scnprintf or sprintf Use sysfs_emit() instead of scnprintf() or sprintf(). Link: https://lore.kernel.org/r/c1711f7cf251730a8ceb5bdfc313bf85662b3395.1643182948.git.yang.guang5@zte.com.cnReported-by:
-
Yin Xiujiang authored
Repalce kthread_create/wake_up_process() with kthread_run() to simplify the code. Link: https://lore.kernel.org/r/20220126014248.466806-1-yinxiujiang@kylinos.cnSigned-off-by:
Yin Xiujiang <yinxiujiang@kylinos.cn> Signed-off-by:
-
Cai Huoqing authored
Replace 'Offlaod' with 'Offload'. Link: https://lore.kernel.org/r/20220128063101.6953-1-cai.huoqing@linux.devAcked-by:
Saurav Kashyap <skashyap@marvell.com> Signed-off-by:
Cai Huoqing <cai.huoqing@linux.dev> Signed-off-by:
-
Jinyoung Choi authored
Because WB performs writes in SLC mode, it is not possible to use WriteBooster indefinitely. Vendors can set a lifetime limit in the device. If the lifetime exceeds this limit, the device ican disable the WB feature. The feature is defined in the "bWriteBoosterBufferLifeTimeEst (IDN = 1E)" attribute. With lifetime exceeding the limit value, the current driver continuously performs the following query: - Write Flag: WB_ENABLE / DISABLE - Read attr: Available Buffer Size - Read attr: Current Buffer Size This patch recognizes that WriteBooster is no longer supported by the device, and prevents unnecessary queries. Link: https://lore.kernel.org/r/1891546521.01643252701746.JavaMail.epsvc@epcpadp3Reviewed-by:
Asutosh Das <quic_asutoshd@quicinc.com> Acked-by:
Avri Altman <avri.altman@wdc.com> Signed-off-by:
Jinyoung Choi <j-young.choi@samsung.com> Signed-off-by:
-
- 25 Jan, 2022 24 commits
-
-
Douglas Gilbert authored
Log subpages are starting to appear in real devices (e.g. SSDs) so add support for one. Adopt approach where all "wild" sub-pages are themselves listed as long as there is at least one non-wild page or subpage for a given page number. Link: https://lore.kernel.org/r/20220109012853.301953-10-dgilbert@interlog.comSigned-off-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
-
Douglas Gilbert authored
By default, this driver places a read lock around all user data fetches and a write lock around all user data modifying operations (e.g. WRITE commands). These locks have "per store" granularity. Other drivers that have a similar function (e.g. null_blk) do not take this data integrity step and run significantly faster in some tests. In the common case of a (simulated) device to device copy (e.g. what dd and its variants do) there should be no need for locks around data accesses. So add the driver and sysfs parameter no_rwlock which is boolean and when set does what its name suggests. The default is false for backward comaptibility. Link: https://lore.kernel.org/r/20220109012853.301953-7-dgilbert@interlog.comSigned-off-by:
-
Douglas Gilbert authored
To distinguish between resets sent by the SCSI mid-level error handling and newly introduced devices (LUs), this Unit Attention: power on, reset, or bus reset occurred [0x29,0x0] has been subdivided into that UA for the reset case and this new UA: power on occurred [0x29,0x1] for the new device (LU) case. This makes debug a little easier to follow when it is turned on (e.g. 'echo 0x1 > opts'). Bump driver version number. Link: https://lore.kernel.org/r/20220109012853.301953-6-dgilbert@interlog.comSigned-off-by:
-
Douglas Gilbert authored
Refine the sdebug_blk_mq_poll() function so it only takes the spinlock on the queue when it can see one or more requests with the in_use bitmap flag set. Link: https://lore.kernel.org/r/20220109012853.301953-5-dgilbert@interlog.comSigned-off-by:
-
Douglas Gilbert authored
When the internal in_use bit array in this driver is full returning SCSI_MLQUEUE_HOST_BUSY leads to the mid-level reissuing the request which is unhelpful. Previously TASK SET FULL status was only returned if ALL_TSF [0x400] is placed in the opts variable (at load time or via sysfs). Now ignore that setting and always return TASK SET FULL when in_use array is full. Also set DID_ABORT together with TASK SET FULL so the mid-level gives up immediately. Aside: the situations addressed by this patch lead to lockups and timeouts. They have only been detected when blk_poll() is used. That mechanism is relatively new in the SCSI subsystem suggesting the mid-level may need more work in that area. Link: https://lore.kernel.org/r/20220109012853.301953-4-dgilbert@interlog.comSigned-off-by:
-
Douglas Gilbert authored
Use READ_ONCE() and WRITE_ONCE() macros when accessing the sdebug_defer::defer_t value. Link: https://lore.kernel.org/r/20220109012853.301953-3-dgilbert@interlog.comSigned-off-by:
-
Douglas Gilbert authored
When scsi_debug is loaded as a module with many (simulated) hosts, targets, and devices (LUs), modprobe can take a long time to return. Only a small amount of this time is spent in the scsi_debug_init(); the rest is other parts of the kernel reacting to to the appearance of new storage devices. As soon as scsi_debug_init() has completed the user space may call 'rmmod scsi_debug' and this was found to cause race problems as outlined here: https://bugzilla.kernel.org/show_bug.cgi?id=212337 To reliably generate this race a sysfs parameter called rm_all_hosts was added and the code was strengthened in this area. The main change was to make the count of scsi_debug hosts present an atomic. Then it was found that the handling of the existing add_host parameter needed the same strengthening. Further: 'echo -9999 > /sys/bus/pseudo/drivers/scsi_debug/add_host has the same effect as rm_all_hosts so rm_all_hosts was not needed. To inhibit a race between two invocations of writes to add_host, a mutex was added. Also address a possible race when rmmod is called but LUs are still being added. The logic to remove (all) hosts is rather crude: it works backwards down a linked lists of hosts. Any pending requests are terminated with DID_NO_CONNECT as are any new requests. In the case where not all hosts are being removed, the ones that remain may have lost requests as just outlined. The lowest numbered host (id) hosts will remain. Cc: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20220109012853.301953-2-dgilbert@interlog.comSigned-off-by: -
Nilesh Javali authored
Link: https://lore.kernel.org/r/20220110050218.3958-18-njavali@marvell.comReviewed-by:
Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by:
Nilesh Javali <njavali@marvell.com> Signed-off-by:
-
Joe Carnuccio authored
While allocating firmware dump, check if dump is already collected and do not re-allocate the buffer. Link: https://lore.kernel.org/r/20220110050218.3958-17-njavali@marvell.com Cc: stable@vger.kernel.org Signed-off-by:
Joe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by:
-
Joe Carnuccio authored
This is an update to the original 28xx adapter enablement. Add a bunch of conditionals that are applicable for 28xx. Link: https://lore.kernel.org/r/20220110050218.3958-16-njavali@marvell.com Fixes: ecc89f25 ("scsi: qla2xxx: Add Device ID for ISP28XX") Cc: stable@vger.kernel.org Signed-off-by:
-
Saurav Kashyap authored
[ 12.323788] BUG: using smp_processor_id() in preemptible [00000000] code: systemd-udevd/1020 [ 12.332297] caller is qla2xxx_create_qpair+0x32a/0x5d0 [qla2xxx] [ 12.338417] CPU: 7 PID: 1020 Comm: systemd-udevd Tainted: G I --------- --- 5.14.0-29.el9.x86_64 #1 [ 12.348827] Hardware name: Dell Inc. PowerEdge R610/0F0XJ6, BIOS 6.6.0 05/22/2018 [ 12.356356] Call Trace: [ 12.358821] dump_stack_lvl+0x34/0x44 [ 12.362514] check_preemption_disabled+0xd9/0xe0 [ 12.367164] qla2xxx_create_qpair+0x32a/0x5d0 [qla2xxx] [ 12.372481] qla2x00_probe_one+0xa3a/0x1b80 [qla2xxx] [ 12.377617] ? _raw_spin_lock_irqsave+0x19/0x40 [ 12.384284] local_pci_probe+0x42/0x80 [ 12.390162] ? pci_match_device+0xd7/0x110 [ 12.396366] pci_device_probe+0xfd/0x1b0 [ 12.402372] really_probe+0x1e7/0x3e0 [ 12.408114] __driver_probe_device+0xfe/0x180 [ 12.414544] driver_probe_device+0x1e/0x90 [ 12.420685] __driver_attach+0xc0/0x1c0 [ 12.426536] ? __device_attach_driver+0xe0/0xe0 [ 12.433061] ? __device_attach_driver+0xe0/0xe0 [ 12.439538] bus_for_each_dev+0x78/0xc0 [ 12.445294] bus_add_driver+0x12b/0x1e0 [ 12.451021] driver_register+0x8f/0xe0 [ 12.456631] ? 0xffffffffc07bc000 [ 12.461773] qla2x00_module_init+0x1be/0x229 [qla2xxx] [ 12.468776] do_one_initcall+0x44/0x200 [ 12.474401] ? load_module+0xad3/0xba0 [ 12.479908] ? kmem_cache_alloc_trace+0x45/0x410 [ 12.486268] do_init_module+0x5c/0x280 [ 12.491730] __do_sys_init_module+0x12e/0x1b0 [ 12.497785] do_syscall_64+0x3b/0x90 [ 12.503029] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 12.509764] RIP: 0033:0x7f554f73ab2e Link: https://lore.kernel.org/r/20220110050218.3958-15-njavali@marvell.com Cc: stable@vger.kernel.org Reviewed-by:
-
Joe Carnuccio authored
28XX adapters are capable of detecting both T10 PI tag escape values as well as IP guard. This was missed due to the adapter type missed in the corresponding macros. Fix this by adding support for 28xx in those macros. Link: https://lore.kernel.org/r/20220110050218.3958-14-njavali@marvell.com Cc: stable@vger.kernel.org Reviewed-by:
-
Quinn Tran authored
Silence compile warning due to unaligned memory access. qla_edif.c:713:45: warning: taking address of packed member 'u' of class or structure 'auth_complete_cmd' may result in an unaligned pointer value [-Waddress-of-packed-member] fcport = qla2x00_find_fcport_by_pid(vha, &appplogiok.u.d_id); Link: https://lore.kernel.org/r/20220110050218.3958-13-njavali@marvell.com Cc: stable@vger.kernel.org Reported-by:kernel test robot <lkp@intel.com> Reviewed-by:
Quinn Tran <qutran@marvell.com> Signed-off-by:
-
Nilesh Javali authored
Fix smatch-reported warning message: drivers/scsi/qla2xxx/qla_target.c:3324 qlt_xmit_response() warn: missing error code 'res' Link: https://lore.kernel.org/r/20220110050218.3958-12-njavali@marvell.com Fixes: 4a8f7101 ("scsi: qla2xxx: Fix unmap of already freed sgl") Cc: stable@vger.kernel.org Reviewed-by:
-
Arun Easi authored
A device logout in loop topology initiates a device connection teardown which loses the FW device handle. In loop topo, the device handle is not regrabbed leading to device login failures and eventually to loss of the device. Fix this by taking the main login path that does it. Link: https://lore.kernel.org/r/20220110050218.3958-11-njavali@marvell.com Cc: stable@vger.kernel.org Reviewed-by:
Arun Easi <aeasi@marvell.com> Signed-off-by:
-
Shreyas Deodhar authored
Add ql2xnvme_queues module parameter to configure number of NVMe queues Usage: Number of NVMe Queues that can be configured. Final value will be min(ql2xnvme_queues, num_cpus, num_chip_queues), 1 - Minimum number of queues supported 8 - Default value 128 - Maximum number of queues supported Link: https://lore.kernel.org/r/20220110050218.3958-10-njavali@marvell.comReviewed-by:
Shreyas Deodhar <sdeodhar@marvell.com> Signed-off-by:
-
Bikash Hazarika authored
Corrected transmission speed mask values for FC. Supported Speed: 16 32 20 Gb/s ===> Should be 64 instead of 20 Supported Speed: 16G 32G 48G ===> Should be 64G instead of 48G Link: https://lore.kernel.org/r/20220110050218.3958-9-njavali@marvell.com Cc: stable@vger.kernel.org Reviewed-by:
Bikash Hazarika <bhazarika@marvell.com> Signed-off-by:
-
Quinn Tran authored
Per FW request, Exec FW can fail due to temporary error resulting in driver not attaching to the adapter. Add retry of this command up to 4 retries. Link: https://lore.kernel.org/r/20220110050218.3958-8-njavali@marvell.comReviewed-by:
-
Quinn Tran authored
The driver makes a call into midlayer (fc_remote_port_delete) which can put the thread to sleep. The thread that originates the call is in interrupt context. The combination of the two trigger a crash. Schedule the call in non-interrupt context where it is more safe. kernel: BUG: scheduling while atomic: swapper/7/0/0x00010000 kernel: Call Trace: kernel: <IRQ> kernel: dump_stack+0x66/0x81 kernel: __schedule_bug.cold.90+0x5/0x1d kernel: __schedule+0x7af/0x960 kernel: schedule+0x28/0x80 kernel: schedule_timeout+0x26d/0x3b0 kernel: wait_for_completion+0xb4/0x140 kernel: ? wake_up_q+0x70/0x70 kernel: __wait_rcu_gp+0x12c/0x160 kernel: ? sdev_evt_alloc+0xc0/0x180 [scsi_mod] kernel: synchronize_sched+0x6c/0x80 kernel: ? call_rcu_bh+0x20/0x20 kernel: ? __bpf_trace_rcu_invoke_callback+0x10/0x10 kernel: sdev_evt_alloc+0xfd/0x180 [scsi_mod] kernel: starget_for_each_device+0x85/0xb0 [scsi_mod] kernel: ? scsi_init_io+0x360/0x3d0 [scsi_mod] kernel: scsi_init_io+0x388/0x3d0 [scsi_mod] kernel: device_for_each_child+0x54/0x90 kernel: fc_remote_port_delete+0x70/0xe0 [scsi_transport_fc] kernel: qla2x00_schedule_rport_del+0x62/0xf0 [qla2xxx] kernel: qla2x00_mark_device_lost+0x9c/0xd0 [qla2xxx] kernel: qla24xx_handle_plogi_done_event+0x55f/0x570 [qla2xxx] kernel: qla2x00_async_login_sp_done+0xd2/0x100 [qla2xxx] kernel: qla24xx_logio_entry+0x13a/0x3c0 [qla2xxx] kernel: qla24xx_process_response_queue+0x306/0x400 [qla2xxx] kernel: qla24xx_msix_rsp_q+0x3f/0xb0 [qla2xxx] kernel: __handle_irq_event_percpu+0x40/0x180 kernel: handle_irq_event_percpu+0x30/0x80 kernel: handle_irq_event+0x36/0x60 Link: https://lore.kernel.org/r/20220110050218.3958-7-njavali@marvell.com Cc: stable@vger.kernel.org Reviewed-by:
-
Quinn Tran authored
After a recoverable PCI error has been detected and recovered, qla driver needs to check to see if the error condition still persist and/or wait for the OS to give the resume signal. Sep 8 22:26:03 localhost kernel: WARNING: CPU: 9 PID: 124606 at qla_tmpl.c:440 qla27xx_fwdt_entry_t266+0x55/0x60 [qla2xxx] Sep 8 22:26:03 localhost kernel: RIP: 0010:qla27xx_fwdt_entry_t266+0x55/0x60 [qla2xxx] Sep 8 22:26:03 localhost kernel: Call Trace: Sep 8 22:26:03 localhost kernel: ? qla27xx_walk_template+0xb1/0x1b0 [qla2xxx] Sep 8 22:26:03 localhost kernel: ? qla27xx_execute_fwdt_template+0x12a/0x160 [qla2xxx] Sep 8 22:26:03 localhost kernel: ? qla27xx_fwdump+0xa0/0x1c0 [qla2xxx] Sep 8 22:26:03 localhost kernel: ? qla2xxx_pci_mmio_enabled+0xfb/0x120 [qla2xxx] Sep 8 22:26:03 localhost kernel: ? report_mmio_enabled+0x44/0x80 Sep 8 22:26:03 localhost kernel: ? report_slot_reset+0x80/0x80 Sep 8 22:26:03 localhost kernel: ? pci_walk_bus+0x70/0x90 Sep 8 22:26:03 localhost kernel: ? aer_dev_correctable_show+0xc0/0xc0 Sep 8 22:26:03 localhost kernel: ? pcie_do_recovery+0x1bb/0x240 Sep 8 22:26:03 localhost kernel: ? aer_recover_work_func+0xaa/0xd0 Sep 8 22:26:03 localhost kernel: ? process_one_work+0x1a7/0x360 .. Sep 8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-8041:22: detected PCI disconnect. Sep 8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-107ff:22: qla27xx_fwdt_entry_t262: dump ram MB failed. Area 5h start 198013h end 198013h Sep 8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-107ff:22: Unable to capture FW dump Sep 8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-1015:22: cmd=0x0, waited 5221 msecs Sep 8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-680d:22: mmio enabled returning. Sep 8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-d04c:22: MBX Command timeout for cmd 0, iocontrol=ffffffff jiffies=10140f2e5 mb[0-3]=[0xffff 0xffff 0xffff 0xffff] Link: https://lore.kernel.org/r/20220110050218.3958-6-njavali@marvell.com Cc: stable@vger.kernel.org Reviewed-by:
-
Quinn Tran authored
Fix warning message due to adisc being flushed. Linux kernel triggered a warning message where a different error code type is not matching up with the expected type. Add additional translation of one error code type to another. WARNING: CPU: 2 PID: 1131623 at drivers/scsi/qla2xxx/qla_init.c:498 qla2x00_async_adisc_sp_done+0x294/0x2b0 [qla2xxx] CPU: 2 PID: 1131623 Comm: drmgr Not tainted 5.13.0-rc1-autotest #1 .. GPR28: c000000aaa9c8890 c0080000079ab678 c00000140a104800 c00000002bd19000 NIP [c00800000790857c] qla2x00_async_adisc_sp_done+0x294/0x2b0 [qla2xxx] LR [c008000007908578] qla2x00_async_adisc_sp_done+0x290/0x2b0 [qla2xxx] Call Trace: [c00000001cdc3620] [c008000007908578] qla2x00_async_adisc_sp_done+0x290/0x2b0 [qla2xxx] (unreliable) [c00000001cdc3710] [c0080000078f3080] __qla2x00_abort_all_cmds+0x1b8/0x580 [qla2xxx] [c00000001cdc3840] [c0080000078f589c] qla2x00_abort_all_cmds+0x34/0xd0 [qla2xxx] [c00000001cdc3880] [c0080000079153d8] qla2x00_abort_isp_cleanup+0x3f0/0x570 [qla2xxx] [c00000001cdc3920] [c0080000078fb7e8] qla2x00_remove_one+0x3d0/0x480 [qla2xxx] [c00000001cdc39b0] [c00000000071c274] pci_device_remove+0x64/0x120 [c00000001cdc39f0] [c0000000007fb818] device_release_driver_internal+0x168/0x2a0 [c00000001cdc3a30] [c00000000070e304] pci_stop_bus_device+0xb4/0x100 [c00000001cdc3a70] [c00000000070e4f0] pci_stop_and_remove_bus_device+0x20/0x40 [c00000001cdc3aa0] [c000000000073940] pci_hp_remove_devices+0x90/0x130 [c00000001cdc3b30] [c0080000070704d0] disable_slot+0x38/0x90 [rpaphp] [ c00000001cdc3b60] [c00000000073eb4c] power_write_file+0xcc/0x180 [c00000001cdc3be0] [c0000000007354bc] pci_slot_attr_store+0x3c/0x60 [c00000001cdc3c00] [c00000000055f820] sysfs_kf_write+0x60/0x80 [c00000001cdc3c20] [c00000000055df10] kernfs_fop_write_iter+0x1a0/0x290 [c00000001cdc3c70] [c000000000447c4c] new_sync_write+0x14c/0x1d0 [c00000001cdc3d10] [c00000000044b134] vfs_write+0x224/0x330 [c00000001cdc3d60] [c00000000044b3f4] ksys_write+0x74/0x130 [c00000001cdc3db0] [c00000000002df70] system_call_exception+0x150/0x2d0 [c00000001cdc3e10] [c00000000000d45c] system_call_common+0xec/0x278 Link: https://lore.kernel.org/r/20220110050218.3958-5-njavali@marvell.com Cc: stable@vger.kernel.org Reported-by:
Abdul Haleem <abdhalee@linux.vnet.ibm.com> Reviewed-by:
-
Quinn Tran authored
Fix stuck sessions in get port database. When a thread is in the process of re-establishing a session, a flag is set to prevent multiple threads / triggers from doing the same task. This flag was left on, where any attempt to relogin was locked out. Clear this flag, if the attempt has failed. Link: https://lore.kernel.org/r/20220110050218.3958-4-njavali@marvell.com Cc: stable@vger.kernel.org Reviewed-by:
-
Saurav Kashyap authored
The timeout handler and the done function are racing. When qla2x00_async_iocb_timeout() starts to run it can be preempted by the normal response path (via the firmware?). qla24xx_async_gpsc_sp_done() releases the SRB unconditionally. When scheduling back to qla2x00_async_iocb_timeout() qla24xx_async_abort_cmd() will access an freed sp->qpair pointer: qla2xxx [0000:83:00.0]-2871:0: Async-gpsc timeout - hdl=63d portid=234500 50:06:0e:80:08:77:b6:21. qla2xxx [0000:83:00.0]-2853:0: Async done-gpsc res 0, WWPN 50:06:0e:80:08:77:b6:21 qla2xxx [0000:83:00.0]-2854:0: Async-gpsc OUT WWPN 20:45:00:27:f8:75:33:00 speeds=2c00 speed=0400. qla2xxx [0000:83:00.0]-28d8:0: qla24xx_handle_gpsc_event 50:06:0e:80:08:77:b6:21 DS 7 LS 6 rc 0 login 1|1 rscn 1|0 lid 5 BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 IP: qla24xx_async_abort_cmd+0x1b/0x1c0 [qla2xxx] Obvious solution to this is to introduce a reference counter. One reference is taken for the normal code path (the 'good' case) and one for the timeout path. As we always race between the normal good case and the timeout/abort handler we need to serialize it. Also we cannot assume any order between the handlers. Since this is slow path we can use proper synchronization via locks. When we are able to cancel a timer (del_timer returns 1) we know there can't be any error handling in progress because the timeout handler hasn't expired yet, thus we can safely decrement the refcounter by one. If we are not able to cancel the timer, we know an abort handler is running. We have to make sure we call sp->done() in the abort handlers before calling kref_put(). Link: https://lore.kernel.org/r/20220110050218.3958-3-njavali@marvell.com Cc: stable@vger.kernel.org Reviewed-by:
Daniel Wagner <dwagner@suse.de> Signed-off-by:
-
Daniel Wagner authored
Move common open-coded asynchronous command initializing code such as setting up the timer and the done callback into one function. This is a preparation step and allows us later on to change the low level error flow handling at a central place. Link: https://lore.kernel.org/r/20220110050218.3958-2-njavali@marvell.com Cc: stable@vger.kernel.org Reviewed-by:
-
- 23 Jan, 2022 2 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'perf-tools-for-v5.17-2022-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tools updates from Arnaldo Carvalho de Melo: - Fix printing 'phys_addr' in 'perf script'. - Fix failure to add events with 'perf probe' in ppc64 due to not removing leading dot (ppc64 ABIv1). - Fix cpu_map__item() python binding building. - Support event alias in form foo-bar-baz, add pmu-events and parse-event tests for it. - No need to setup affinities when starting a workload or attaching to a pid. - Use path__join() to compose a path instead of ad-hoc snprintf() equivalent. - Override attr->sample_period for non-libpfm4 events. - Use libperf cpumap APIs instead of accessing the internal state directly. - Sync x86 arch prctl headers and files changed by the new set_mempolicy_home_node syscall with the kernel sources. - Remove duplicate include in cpumap.h. - Remove redundant err variable. * tag 'perf-tools-for-v5.17-2022-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf tools: Remove redundant err variable perf test: Add parse-events test for aliases with hyphens perf test: Add pmu-events test for aliases with hyphens perf parse-events: Support event alias in form foo-bar-baz perf evsel: Override attr->sample_period for non-libpfm4 events perf cpumap: Remove duplicate include in cpumap.h perf cpumap: Migrate to libperf cpumap api perf python: Fix cpu_map__item() building perf script: Fix printing 'phys_addr' failure issue tools headers UAPI: Sync files changed by new set_mempolicy_home_node syscall tools headers UAPI: Sync x86 arch prctl headers with the kernel sources perf machine: Use path__join() to compose a path instead of snprintf(dir, '/', filename) perf evlist: No need to setup affinities when disabling events for pid targets perf evlist: No need to setup affinities when enabling events for pid targets perf stat: No need to setup affinities when starting a workload perf affinity: Allow passing a NULL arg to affinity__cleanup() perf probe: Fix ppc64 'perf probe add events failed' case
-
