1. 08 Nov, 2013 11 commits
  2. 07 Nov, 2013 13 commits
  3. 06 Nov, 2013 5 commits
  4. 05 Nov, 2013 11 commits
    • David S. Miller's avatar
      Merge branch 'huawei_cdc_ncm' · b9155501
      David S. Miller authored
      Bjørn Mork says:
      
      ====================
      The huawei_cdc_ncm driver.
      
      Enrico has been kind enough to let me repost his driver with the changes
      requested by Oliver Neukum during the last review of this series.
      
      The changes I have made from Enricos original v5 series to this version
      are:
      
      v6:
       - fix to avoid corrupting drvstate->pmcount
       - fix error return value from huawei_cdc_ncm_suspend()
       - drop redundant testing for subdriver->suspend during resume
       - broke a few lines to keep within the 80 columns recommendation
       - rebased on top of current net-next
      
      Enrico's orginal introduction to the v5 series follows below.  It explains
      the background much better than I can.
      
      Bjørn
      
      [quote Enrico Mioso]
      
      So this is a new, revised, edition of the huawei_cdc_ncm.c driver, which
      supports devices resembling the NCM standard, but using it also as a mean
      to encapsulate other protocols, as is the case for the Huawei E3131 and
      E3251 modem devices.
      Some precisations are needed however - and I encourage discussion on this: and
      that's why I'm sending this message with a broader CC.
      Merging those patches might change:
      - the way Modem Manager interacts with those devices
      - some regressions might be possible if there are some unknown firmware
        variants around (Franko?)
      
      First of all: I observed the behaviours of two devices.
      Huawei E3131: this device doesn't accept NDIS setup requests unless they're
      sent via the embedded AT channel exposed by this driver.
      So actually we gain funcionality in this case!
      
      The second case, is the Huawei E3251: which works with standard NCM driver,
      still exposing an AT embedded channel. Whith this patch set applied, you gain
      some funcionality, loosing the ability to catch standard NCM events for now.
      The device will work in both ways with no problems, but this has to be
      acknowledged and discussed. Might be we can develop this driver further to
      change this, when more devices are tested.
      
      We where thinking Huawei changed their interfaces on new devices - but probably
      this driver only works around a nice firmware bug present in E3131, which
      prevented the modem from being used in NDIS mode.
      
      I think committing this is definitely wortth-while, since it will allow for
      more Huawei devices to be used without serial connection. Some devices like the
      E3251 also, reports some status information only via the embedded AT channel,
      at least in my case.
      Note: I'm not subscribed to any list except the Modem Manager's one, so please
      CC me, thanks!!
      
      [/quote]
      
      Enrico Mioso (3):
        net: cdc_ncm: Export cdc_ncm_{tx,rx}_fixup functions for re-use
        net: huawei_cdc_ncm: Introduce the huawei_cdc_ncm driver
        net: cdc_ncm: remove non-standard NCM device IDs
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b9155501
    • Enrico Mioso's avatar
      net: cdc_ncm: remove non-standard NCM device IDs · 9fea037d
      Enrico Mioso authored
      Remove device IDs of NCM-like (but not NCM-conformant) devices, that are
      handled by the huawwei_cdc_ncm driver now.
      Signed-off-by: default avatarEnrico Mioso <mrkiko.rs@gmail.com>
      Signed-off-by: default avatarBjørn Mork <bjorn@mork.no>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9fea037d
    • Enrico Mioso's avatar
      net: huawei_cdc_ncm: Introduce the huawei_cdc_ncm driver · 41c47d8c
      Enrico Mioso authored
      This driver supports devices using the NCM protocol as an encapsulation layer
      for other protocols, like the E3131 Huawei 3G modem. This drivers approach was
      heavily inspired by the qmi_wwan/cdc_mbim approach & code model.
      Signed-off-by: default avatarEnrico Mioso <mrkiko.rs@gmail.com>
      Signed-off-by: default avatarBjørn Mork <bjorn@mork.no>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      41c47d8c
    • Enrico Mioso's avatar
      net: cdc_ncm: Export cdc_ncm_{tx, rx}_fixup functions for re-use · 2f69702c
      Enrico Mioso authored
      Some drivers implementing NCM-like protocols, may re-use those functions, as is
      the case in the huawei_cdc_ncm driver.
      Export them via EXPORT_SYMBOL_GPL, in accordance with how other functions have
      been exported.
      Signed-off-by: default avatarEnrico Mioso <mrkiko.rs@gmail.com>
      Signed-off-by: default avatarBjørn Mork <bjorn@mork.no>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2f69702c
    • Florent Fourcot's avatar
      ipv6: remove old conditions on flow label sharing · b579035f
      Florent Fourcot authored
      The code of flow label in Linux Kernel follows
      the rules of RFC 1809 (an informational one) for
      conditions on flow label sharing. There rules are
      not in the last proposed standard for flow label
      (RFC 6437), or in the previous one (RFC 3697).
      
      Since this code does not follow any current or
      old standard, we can remove it.
      
      With this removal, the ipv6_opt_cmp function is
      now a dead code and it can be removed too.
      
      Changelog to v1:
       * add justification for the change
       * remove the condition on IPv6 options
      
      [ Remove ipv6_hdr_cmp and it is now unused as well. -DaveM ]
      Signed-off-by: default avatarFlorent Fourcot <florent.fourcot@enst-bretagne.fr>
      Acked-by: default avatarHannes Frederic Sowa <hannes@stressinduktion.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b579035f
    • David S. Miller's avatar
      Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next · cfce0a2b
      David S. Miller authored
      John W. Linville says:
      
      ====================
      Please accept the following pull request intended for the 3.13 tree...
      
      I had intended to pass most of these to you as much as two weeks ago.
      Unfortunately, I failed to account for the effects of bad Internet
      connections and my own fatique/laziness while traveling.  On the bright
      side, at least these have been baking in linux-next for some time!
      
      For the mac80211 bits, Johannes says:
      
      "This time I have two fixes for P2P (which requires not using CCK rates)
      and a workaround for APs with broken WMM information."
      
      For the iwlwifi bits, Johannes says:
      
      "I have a few fixes for warnings/issues: one from Alex, fixing scan
      timings, one from Emmanuel fixing a WARN_ON in the DVM driver, one from
      Stanislaw removing a trigger-happy WARN_ON in the MVM driver and a
      change from myself to try to recover when the device isn't processing
      commands quickly."
      
      And:
      
      "For this round, I have a lot of changes:
       * power management improvements
       * BT coexistence improvements/updates
       * new device support
       * VHT support
       * IBSS support (though due to a small bug it requires new firmware)
       * various other fixes/improvements."
      
      For the Bluetooth bits, Gustavo says:
      
      "More patches for 3.12, busy times for Bluetooth. More than a 100 commits since
      the last pull. The bulk of work comes from Johan and Marcel, they are doing
      fixes and improvements all over the Bluetooth subsystem, as the diffstat can
      show."
      
      For the ath10k and ath6kl bits, Kalle says:
      
      "Bartosz added support to ath10k for our 10.x AP firmware branch, which
      gives us AP specific features and fixes. We still support the main
      firmware branch as well just like before, ath10k detects runtime what
      firmware is used. Unfortunately the firmware interface in 10.x branch is
      somewhat different so there was quite a lot of changes in ath10k for
      this.
      
      Michal and Sujith did some performance improvements in ath10k. Vladimir
      fixed a compiler warning and Fengguang removed an extra semicolon."
      
      For the NFC bits, Samuel says:
      
      "It's a fairly big one, with the following highlights:
      
      - NFC digital layer implementation: Most NFC chipsets implement the NFC
        digital layer in firmware, but others have more basic functionalities
        and expect the host to implement the digital layer. This layer sits
        below the NFC core.
      
      - Sony's port100 support: This is "soft" NFC USB dongle that expects the
        digital layer to be implemented on the host. This is the first user of
        our NFC digital stack implementation.
      
      - Secure element API: We now provide a netlink API for enabling,
        disabling and discovering NFC attached (embedded or UICC ones) secure
        elements. With some userspace help, this allows us to support NFC
        payments.
        Only the pn544 driver currently supports that API.
      
      - NCI SPI fixes and improvements: In order to support NCI devices over
        SPI, we fixed and improved our NCI/SPI implementation. The currently
        most deployed NFC NCI chipset, Broadcom's bcm2079x, supports that mode
        and we're planning to use our NCI/SPI framework to implement a
        driver for it.
      
      - pn533 fragmentation support in target mode: This was the only missing
        feature from our pn533 impementation. We now support fragmentation in
        both Tx and Rx modes, in target mode."
      
      On top of all that, brcmfmac and rt2x00 both get the usual flurry
      of updates.  A few other drivers get hit here or there as well.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cfce0a2b
    • Jason Wang's avatar
      virtio-net: coalesce rx frags when possible during rx · ba275241
      Jason Wang authored
      Commit 2613af0e (virtio_net: migrate mergeable
      rx buffers to page frag allocators) try to increase the payload/truesize for
      MTU-sized traffic. But this will introduce the extra overhead for GSO packets
      received because of the frag list. This commit tries to reduce this issue by
      coalesce the possible rx frags when possible during rx. Test result shows the
      about 15% improvement on full size GSO packet receiving (and even better than
      before commit 2613af0e).
      
      Before this commit:
      ./netperf -H 192.168.100.4
      MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.100.4
      () port 0 AF_INET : demo
      Recv   Send    Send
      Socket Socket  Message  Elapsed
      Size   Size    Size     Time     Throughput
      bytes  bytes   bytes    secs.    10^6bits/sec
      
       87380  16384  16384    10.00    20303.87
      
      After this commit:
      ./netperf -H 192.168.100.4
      MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.100.4
      () port 0 AF_INET : demo
      Recv   Send    Send
      Socket Socket  Message  Elapsed
      Size   Size    Size     Time     Throughput
      bytes  bytes   bytes    secs.    10^6bits/sec
      
       87380  16384  16384    10.00    23841.26
      
      Cc: Rusty Russell <rusty@rustcorp.com.au>
      Cc: Michael S. Tsirkin <mst@redhat.com>
      Cc: Michael Dalton <mwdalton@google.com>
      Cc: Eric Dumazet <edumazet@google.com>
      Acked-by: default avatarMichael S. Tsirkin <mst@redhat.com>
      Acked-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarJason Wang <jasowang@redhat.com>
      Acked-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ba275241
    • Jason Wang's avatar
      net: introduce skb_coalesce_rx_frag() · f8e617e1
      Jason Wang authored
      Sometimes we need to coalesce the rx frags to avoid frag list. One example is
      virtio-net driver which tries to use small frags for both MTU sized packet and
      GSO packet. So this patch introduce skb_coalesce_rx_frag() to do this.
      
      Cc: Rusty Russell <rusty@rustcorp.com.au>
      Cc: Michael S. Tsirkin <mst@redhat.com>
      Cc: Michael Dalton <mwdalton@google.com>
      Cc: Eric Dumazet <edumazet@google.com>
      Acked-by: default avatarMichael S. Tsirkin <mst@redhat.com>
      Signed-off-by: default avatarJason Wang <jasowang@redhat.com>
      Acked-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f8e617e1
    • Duan Jiong's avatar
      vxlan: Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(...)) · e50fddc8
      Duan Jiong authored
      trivial patch converting ERR_PTR(PTR_ERR()) into ERR_CAST().
      No functional changes.
      Signed-off-by: default avatarDuan Jiong <duanj.fnst@cn.fujitsu.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e50fddc8
    • Jesper Dangaard Brouer's avatar
      net: codel: Avoid undefined behavior from signed overflow · 1ba3aab3
      Jesper Dangaard Brouer authored
      As described in commit 5a581b36 (jiffies: Avoid undefined
      behavior from signed overflow), according to the C standard
      3.4.3p3, overflow of a signed integer results in undefined
      behavior.
      
      To fix this, do as the above commit, and do an unsigned
      subtraction, and interpreting the result as a signed
      two's-complement number.  This is based on the theory from
      RFC 1982 and is nicely described in wikipedia here:
       https://en.wikipedia.org/wiki/Serial_number_arithmetic#General_Solution
      
      A side-note, I have seen practical issues with the previous logic
      when dealing with 16-bit, on a 64-bit machine (gcc version
      4.4.5). This were 32-bit, which I have not observed issues with.
      
      Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
      Signed-off-by: default avatarJesper Dangaard Brouer <netoptimizer@brouer.com>
      Acked-by: default avatarPaul E. McKenney <paulmck@linux.vnet.ibm.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1ba3aab3
    • David S. Miller's avatar
      Merge branch 'for-davem' of git://gitorious.org/linux-can/linux-can-next · 13521a57
      David S. Miller authored
      Marc Kleine-Budde says:
      
      ====================
      here's a pull request for net-next.
      
      It includes a patch by Oliver Hartkopp et al. that adds documentation
      for the broadcast manager to Documentation/networking/can.txt. Three
      patches by me that clean up the netlink handling code in the CAN core.
      And another patch that removes a not needed function from the ti_hecc
      driver.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      13521a57