Struct pci_driver contains a struct device_driver, so for PCI devices, it's
easy to convert a device_driver * to a pci_driver * with to_pci_driver().
The device_driver * is in struct device, so we don't need to also keep
track of the pci_driver * in struct pci_dev.

Replace pci_dev->driver with to_pci_driver().  This is a step toward
removing pci_dev->driver.

[bhelgaas: split to separate patch]
Link: https://lore.kernel.org/r/20211004125935.2300113-11-u.kleine-koenig@pengutronix.deSigned-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Struct pci_driver contains a struct device_driver, so for PCI devices, it's
easy to convert a device_driver * to a pci_driver * with to_pci_driver().
The device_driver * is in struct device, so we don't need to also keep
track of the pci_driver * in struct pci_dev.

Replace pdev->driver with to_pci_driver().  This is a step toward removing
pci_dev->driver.

[bhelgaas: split to separate patch]
Link: https://lore.kernel.org/r/20211004125935.2300113-11-u.kleine-koenig@pengutronix.deSigned-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Struct pci_driver contains a struct device_driver, so for PCI devices, it's
easy to convert a device_driver * to a pci_driver * with to_pci_driver().
The device_driver * is in struct device, so we don't need to also keep
track of the pci_driver * in struct pci_dev.

Replace pdev->driver with to_pci_driver().  This is a step toward removing
pci_dev->driver.

[bhelgaas: split to separate patch]
Link: https://lore.kernel.org/r/20211004125935.2300113-11-u.kleine-koenig@pengutronix.deSigned-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Struct pci_driver contains a struct device_driver, so for PCI devices, it's
easy to convert a device_driver * to a pci_driver * with to_pci_driver().
The device_driver * is in struct device, so we don't need to also keep
track of the pci_driver * in struct pci_dev.

Replace pdev->driver with to_pci_driver().  This is a step toward removing
pci_dev->driver.

[bhelgaas: split to separate patch]
Link: https://lore.kernel.org/r/20211004125935.2300113-11-u.kleine-koenig@pengutronix.deSigned-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Struct pci_driver contains a struct device_driver, so for PCI devices, it's
easy to convert a device_driver * to a pci_driver * with to_pci_driver().
The device_driver * is in struct device, so we don't need to also keep
track of the pci_driver * in struct pci_dev.

Replace pdev->driver with to_pci_driver().  This is a step toward removing
pci_dev->driver.

[bhelgaas: split to separate patch]
Link: https://lore.kernel.org/r/20211004125935.2300113-11-u.kleine-koenig@pengutronix.deSigned-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Struct pci_driver contains a struct device_driver, so for PCI devices, it's
easy to convert a device_driver * to a pci_driver * with to_pci_driver().
The device_driver * is in struct device, so we don't need to also keep
track of the pci_driver * in struct pci_dev.

Replace pdev->driver with to_pci_driver().  This is a step toward removing
pci_dev->driver.

[bhelgaas: split to separate patch]
Link: https://lore.kernel.org/r/20211004125935.2300113-11-u.kleine-koenig@pengutronix.deSigned-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Save the struct pci_driver and struct pci_error_handlers pointers from
pdev->driver instead of chasing the pointers several times.  No functional
change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Struct pci_driver contains a struct device_driver, so for PCI devices, it's
easy to convert a device_driver * to a pci_driver * with to_pci_driver().
The device_driver * is in struct device, so we don't need to also keep
track of the pci_driver * in struct pci_dev.

Replace pdev->driver with to_pci_driver().  This is a step toward removing
pci_dev->driver.

[bhelgaas: split to separate patch]
Link: https://lore.kernel.org/r/20211004125935.2300113-11-u.kleine-koenig@pengutronix.deSigned-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>

pcifront_common_process() exits early if pcidev or pcidev->driver are NULL,
so simplify it by not checking them again.

[bhelgaas: split flag change to separate patch]
Link: https://lore.kernel.org/r/20211004125935.2300113-4-u.kleine-koenig@pengutronix.deSigned-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>

Replace dev->driver_name() by dev_driver_string() for the corresponding
struct device.  This is a step toward removing pci_dev->driver.

[bhelgaas: split to separate patch]
Link: https://lore.kernel.org/r/20211004125935.2300113-8-u.kleine-koenig@pengutronix.deSigned-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Simon Horman <simon.horman@corigine.com>

Replace dev->driver_name() by dev_driver_string() for the corresponding
struct device.  This is a step toward removing pci_dev->driver.

[bhelgaas: split to separate patch]
Link: https://lore.kernel.org/r/20211004125935.2300113-8-u.kleine-koenig@pengutronix.deTested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>

Replace dev->driver_name() by dev_driver_string() for the corresponding
struct device.  This is a step toward removing pci_dev->driver.

[bhelgaas: split to separate patch]
Link: https://lore.kernel.org/r/20211004125935.2300113-8-u.kleine-koenig@pengutronix.deSigned-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Replace dev->driver_name() by dev_driver_string() for the corresponding
struct device.  This is a step toward removing pci_dev->driver.

[bhelgaas: split to separate patch]
Link: https://lore.kernel.org/r/20211004125935.2300113-8-u.kleine-koenig@pengutronix.deSigned-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Replace dev->driver_name() by dev_driver_string() for the corresponding
struct device.  This is a step toward removing pci_dev->driver.

[bhelgaas: split to separate patch]
Link: https://lore.kernel.org/r/20211004125935.2300113-8-u.kleine-koenig@pengutronix.deSigned-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Replace pdev->driver->name by dev_driver_string() for the corresponding
struct device.  This is a step toward removing pci_dev->driver.

Move the function nearer its only user and instead of the ?: operator use a
normal "if" which is more readable.

Link: https://lore.kernel.org/r/20211004125935.2300113-6-u.kleine-koenig@pengutronix.deSigned-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

All drivers that use ssb_pcihost_probe(), i.e., b43_pci_bridge_driver and
b44_pci_driver, set the pci_driver.name, and __pci_register_driver() sets
the struct driver.name member to the same value.

Replace dev->driver_name() by dev_driver_string() for the corresponding
struct device.  This is a step toward removing pci_dev->driver.

Link: https://lore.kernel.org/r/20211004125935.2300113-7-u.kleine-koenig@pengutronix.deSigned-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Michael Büsch <m@bues.ch>

When bcma_host_pci_probe() is called, the PCI driver core has already
assigned the device's driver in local_pci_probe(). So dev->driver is always
true, and here it points to bcma_pci_bridge_driver, which has .name set to
"bcma-pci-bridge". Simplify accordingly.

Link: https://lore.kernel.org/r/20211004125935.2300113-5-u.kleine-koenig@pengutronix.deSigned-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

A struct pci_driver is shared across all device instances, so assigning
pci_driver.err_handler once per device isn't really sensible.

Set adf_driver.err_handler statically instead of in adf_enable_aer().
This removes a use of pci_dev->driver, which is a step toward removing
pci_dev->driver altogether.

Since adf_enable_aer() returns zero unconditionally, make it a void
function.

Link: https://lore.kernel.org/r/20211004125935.2300113-10-u.kleine-koenig@pengutronix.deSigned-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

The only two drivers don't make use of the id parameter, so drop it.  This
is a step toward removing pci_dev->driver.

Link: https://lore.kernel.org/r/20211004125935.2300113-9-u.kleine-koenig@pengutronix.deSigned-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>

Save the struct pci_driver pointer from pdev->driver instead of repeating
it several times.  No functional change.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

When the device core calls the .probe() callback for a device, the device
is never bound, so pci_dev->driver is always NULL.

Remove the unnecessary test of !pci_dev->driver.

Link: https://lore.kernel.org/r/20211004125935.2300113-3-u.kleine-koenig@pengutronix.deSigned-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>

When the driver core calls pci_device_remove(), there is a driver bound
to the device, so pci_dev->driver is never NULL.

Remove the unnecessary test of pci_dev->driver.

Link: https://lore.kernel.org/r/20211004125935.2300113-2-u.kleine-koenig@pengutronix.deSigned-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>

to_pci_driver() takes a pointer to a struct device_driver and uses
container_of() to find the struct pci_driver that contains it.

If given a NULL pointer to a struct device_driver, return a NULL pci_driver
pointer instead of applying container_of() to NULL.

This simplifies callers that would otherwise have to check for a NULL
pointer first.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Nathan Chancellor reports that the recent change to pci_iounmap in
commit 9caea000 ("parisc: Declare pci_iounmap() parisc version only
when CONFIG_PCI enabled") causes build errors on arm64.

It took me about two hours to convince myself that I think I know what
the logic of that mess of #ifdef's in the <asm-generic/io.h> header file
really aim to do, and rewrite it to be easier to follow.

Famous last words.

Anyway, the code has now been lifted from that grotty header file into
lib/pci_iomap.c, and has fairly extensive comments about what the logic
is.  It also avoids indirecting through another confusing (and badly
named) helper function that has other preprocessor config conditionals.

Let's see what odd architecture did something else strange in this area
to break things.  But my arm64 cross build is clean.

Fixes: 9caea000 ("parisc: Declare pci_iounmap() parisc version only when CONFIG_PCI enabled")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Ulrich Teichert <krypton@ulrich-teichert.org>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull x86 fixes from Borislav Petkov:

 - Prevent a infinite loop in the MCE recovery on return to user space,
   which was caused by a second MCE queueing work for the same page and
   thereby creating a circular work list.

 - Make kern_addr_valid() handle existing PMD entries, which are marked
   not present in the higher level page table, correctly instead of
   blindly dereferencing them.

 - Pass a valid address to sanitize_phys(). This was caused by the
   mixture of inclusive and exclusive ranges. memtype_reserve() expect
   'end' being exclusive, but sanitize_phys() wants it inclusive. This
   worked so far, but with end being the end of the physical address
   space the fail is exposed.

 - Increase the maximum supported GPIO numbers for 64bit. Newer SoCs
   exceed the previous maximum.

* tag 'x86_urgent_for_v5.15_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mce: Avoid infinite loop for copy from user recovery
  x86/mm: Fix kern_addr_valid() to cope with existing but not present entries
  x86/platform: Increase maximum GPIO number for X86_64
  x86/pat: Pass valid address to sanitize_phys()

Pull perf event fix from Thomas Gleixner:
 "A single fix for the perf core where a value read with READ_ONCE() was
  checked and then reread which makes all the checks invalid. Reuse the
  already read value instead"

* tag 'perf-urgent-2021-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  events: Reuse value read using READ_ONCE instead of re-reading it

Pull locking fixes from Thomas Gleixner:
 "A set of updates for the RT specific reader/writer locking base code:

   - Make the fast path reader ordering guarantees correct.

   - Code reshuffling to make the fix simpler"

[ This plays ugly games with atomic_add_return_release() because we
  don't have a plain atomic_add_release(), and should really be cleaned
  up, I think    - Linus ]

* tag 'locking-urgent-2021-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/rwbase: Take care of ordering guarantee for fastpath reader
  locking/rwbase: Extract __rwbase_write_trylock()
  locking/rwbase: Properly match set_and_save_state() to restore_state()

Pull powerpc fixes from Michael Ellerman:

 - Fix crashes when scv (System Call Vectored) is used to make a syscall
   when a transaction is active, on Power9 or later.

 - Fix bad interactions between rfscv (Return-from scv) and Power9
   fake-suspend mode.

 - Fix crashes when handling machine checks in LPARs using the Hash MMU.

 - Partly revert a recent change to our XICS interrupt controller code,
   which broke the recently added Microwatt support.

Thanks to Cédric Le Goater, Eirik Fuller, Ganesh Goudar, Gustavo Romero,
Joel Stanley, Nicholas Piggin.

* tag 'powerpc-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/xics: Set the IRQ chip data for the ICS native backend
  powerpc/mce: Fix access error in mce handler
  KVM: PPC: Book3S HV: Tolerate treclaim. in fake-suspend mode changing registers
  powerpc/64s: system call rfscv workaround for TM bugs
  selftests/powerpc: Add scv versions of the basic TM syscall tests
  powerpc/64s: system call scv tabort fix for corrupt irq soft-mask state

Merge tag 'kbuild-fixes-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix bugs in checkkconfigsymbols.py

 - Fix missing sys import in gen_compile_commands.py

 - Fix missing FORCE warning for ARCH=sh builds

 - Fix -Wignored-optimization-argument warnings for Clang builds

 - Turn -Wignored-optimization-argument into an error in order to stop
   building instead of sprinkling warnings

* tag 'kbuild-fixes-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: Add -Werror=ignored-optimization-argument to CLANG_FLAGS
  x86/build: Do not add -falign flags unconditionally for clang
  kbuild: Fix comment typo in scripts/Makefile.modpost
  sh: Add missing FORCE prerequisites in Makefile
  gen_compile_commands: fix missing 'sys' package
  checkkconfigsymbols.py: Remove skipping of help lines in parse_kconfig_file
  checkkconfigsymbols.py: Forbid passing 'HEAD' to --commit

Merge tag 'perf-tools-fixes-for-v5.15-2021-09-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix ip display in 'perf script' when output type != attr->type.

 - Ignore deprecation warning when using libbpf'sg btf__get_from_id(),
   fixing the build with libbpf v0.6+.

 - Make use of FD() robust in libperf, fixing a segfault with 'perf stat
   --iostat list'.

 - Initialize addr_location:srcline pointer to NULL when resolving
   callchain addresses.

 - Fix fused instruction logic for assembly functions in 'perf
   annotate'.

* tag 'perf-tools-fixes-for-v5.15-2021-09-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf bpf: Ignore deprecation warning when using libbpf's btf__get_from_id()
  libperf evsel: Make use of FD robust.
  perf machine: Initialize srcline string member in add_location struct
  perf script: Fix ip display when type != attr->type
  perf annotate: Fix fused instr logic for assembly functions

The old dmascc driver depends on the legacy ISA_DMA_API, and blindly
just casts the kernel virtual address to 'int' for set_dma_addr().

That works only incidentally, and because the high bits of the address
will be ignored anyway. And on 64-bit architectures it causes warnings.

Admittedly, 64-bit architectures with ISA are basically dead - I think
the only example of this is alpha, and nobody would ever use the dmascc
driver there.  But hey, the fix is easy enough, the end result is
cleaner, and it's yet another configuration that now builds without
warnings.

If somebody actually uses this driver on an alpha and this fixes it for
you, please email me.  Because that is just incredibly bizarre.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

With the previous commit (9caea000: "parisc: Declare pci_iounmap()
parisc version only when CONFIG_PCI enabled") we can now enable
GENERIC_PCI_IOMAP unconditionally on alpha, and if PCI is not enabled we
will just get the nice empty helper functions that allow mixed-bus
drivers to build.

Example driver: the old 3com/3c59x.c driver works with either the PCI or
the EISA version of the 3x59x card, but wouldn't build in an EISA-only
configuration because of missing pci_iomap() and pci_iounmap() dummy
wrappers.

Most of the other PCI infrastructure just becomes empty wrappers even
without GENERIC_PCI_IOMAP, and it's not obvious that the pci_iomap
functionality shouldn't do the same, but this works.

Cc: Ulrich Teichert <krypton@ulrich-teichert.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Linus noticed odd declaration rules for pci_iounmap() in iomap.h and
pci_iomap.h, where it dependend on either NO_GENERIC_PCI_IOPORT_MAP or
GENERIC_IOMAP when CONFIG_PCI was disabled.

Testing on parisc seems to indicate that we need pci_iounmap() only when
CONFIG_PCI is enabled, so the declaration of pci_iounmap() can be moved
cleanly into pci_iomap.h in sync with the declarations of pci_iomap().

Link: https://lore.kernel.org/all/CAHk-=wjRrh98pZoQ+AzfWmsTZacWxTJKXZ9eKU2X_0+jM=O8nw@mail.gmail.com/Signed-off-by: Helge Deller <deller@gmx.de>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: 97a29d59 ("[PARISC] fix compile break caused by iomap: make IOPORT/PCI mapping functions conditional")
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Ulrich Teichert <krypton@ulrich-teichert.org>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This reverts commit 27da370e.

Sudip Mukherjee reports that this broke pulseaudio with a NULL pointer
dereference in vc4_hdmi_audio_prepare(), bisected it to this commit, and
confirmed that a revert fixed the problem.

Revert the problematic commit until fixed.

Link: https://lore.kernel.org/all/CADVatmPB9-oKd=ypvj25UYysVo6EZhQ6bCM7EvztQBMyiZfAyw@mail.gmail.com/
Link: https://lore.kernel.org/all/CADVatmN5EpRshGEPS_JozbFQRXg5w_8LFB3OMP1Ai-ghxd3w4g@mail.gmail.com/Reported-and-tested-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Emma Anholt <emma@anholt.net>
Cc: Dave Airlie <airlied@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This reverts commits

  9984d666 ("drm/vc4: hdmi: Make sure the controller is powered in detect")
  411efa18 ("drm/vc4: hdmi: Move the HSM clock enable to runtime_pm")

as Michael Stapelberg reports that the new runtime PM changes cause his
Raspberry Pi 3 to hang on boot, probably due to interactions with other
changes in the DRM tree (because a bisect points to the merge in commit
e058a84b: "Merge tag 'drm-next-2021-07-01' of git://.../drm").

Revert these two commits until it's been resolved.

Link: https://lore.kernel.org/all/871r5mp7h2.fsf@midna.i-did-not-set--mail-host-address--so-tickle-me/Reported-and-tested-by: Michael Stapelberg <michael@stapelberg.ch>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Dave Stevenson <dave.stevenson@raspberrypi.com>
Cc: Dave Airlie <airlied@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Similar to commit 589834b3 ("kbuild: Add
-Werror=unknown-warning-option to CLANG_FLAGS").

Clang ignores certain GCC flags that it has not implemented, only
emitting a warning:

$ echo | clang -fsyntax-only -falign-jumps -x c -
clang-14: warning: optimization flag '-falign-jumps' is not supported
[-Wignored-optimization-argument]

When one of these flags gets added to KBUILD_CFLAGS unconditionally, all
subsequent cc-{disable-warning,option} calls fail because -Werror was
added to these invocations to turn the above warning and the equivalent
-W flag warning into errors.

To catch the presence of these flags earlier, turn
-Wignored-optimization-argument into an error so that the flags can
either be implemented or ignored via cc-option and there are no more
weird errors.
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

clang does not support -falign-jumps and only recently gained support
for -falign-loops. When one of the configuration options that adds these
flags is enabled, clang warns and all cc-{disable-warning,option} that
follow fail because -Werror gets added to test for the presence of this
warning:

clang-14: warning: optimization flag '-falign-jumps=0' is not supported
[-Wignored-optimization-argument]

To resolve this, add a couple of cc-option calls when building with
clang; gcc has supported these options since 3.2 so there is no point in
testing for their support. -falign-functions was implemented in clang-7,
-falign-loops was implemented in clang-14, and -falign-jumps has not
been implemented yet.

Link: https://lore.kernel.org/r/YSQE2f5teuvKLkON@Ryzen-9-3900X.localdomain/
Link: https://lore.kernel.org/r/20210824022640.2170859-2-nathan@kernel.org/Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Change comment "create one <module>.mod.c file pr. module"
to "create one <module>.mod.c file per module"
Signed-off-by: Ramji Jiyani <ramjiyani@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

make:

    arch/sh/boot/Makefile:87: FORCE prerequisite is missing

Add the missing FORCE prerequisites for all build targets identified by
"make help".

Fixes: e1f86d7b ("kbuild: warn if FORCE is missing for if_changed(_dep,_rule) and filechk")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>