- 29 Oct, 2019 40 commits
-
-
Damien Le Moal authored
commit 8f8fed0c upstream. When a non-passthrough command is terminated with CHECK CONDITION, request sense is executed by hijacking the command descriptor. Since scsi_eh_prep_cmnd() and scsi_eh_restore_cmnd() do not save/restore the original command resid, the value returned on failure of the original command is lost and replaced with the value set by the execution of the request sense command. This value may in many instances be unaligned to the device sector size, causing sd_done() to print a warning message about the incorrect unaligned resid before the command is retried. Fix this problem by saving the original command residual in struct scsi_eh_save using scsi_eh_prep_cmnd() and restoring it in scsi_eh_restore_cmnd(). In addition, to make sure that the request sense command is executed with a correctly initialized command structure, also reset the residual to 0 in scsi_eh_prep_cmnd() after saving the original command value in struct scsi_eh_save. Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191001074839.1994-1-damien.lemoal@wdc.comSigned-off-by:
Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Oliver Neukum authored
commit 21e3d6c8 upstream. I've got a report about a UAS drive enclosure reporting back Sense: Logical unit access not authorized if the drive it holds is password protected. While the drive is obviously unusable in that state as a mass storage device, it still exists as a sd device and when the system is asked to perform a suspend of the drive, it will be sent a SYNCHRONIZE CACHE. If that fails due to password protection, the error must be ignored. Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190903101840.16483-1-oneukum@suse.comSigned-off-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
-
Steffen Maier authored
commit 2190168a upstream. On excessive bit errors for the FCP channel ingress fibre path, the channel notifies us. Previously, we only emitted a kernel message and a trace record. Since performance can become suboptimal with I/O timeouts due to bit errors, we now stop using an FCP device by default on channel notification so multipath on top can timely failover to other paths. A new module parameter zfcp.ber_stop can be used to get zfcp old behavior. User explanation of new kernel message: * Description: * The FCP channel reported that its bit error threshold has been exceeded. * These errors might result from a problem with the physical components * of the local fibre link into the FCP channel. * The problem might be damage or malfunction of the cable or * cable connection between the FCP channel and * the adjacent fabric switch port or the point-to-point peer. * Find details about the errors in the HBA trace for the FCP device. * The zfcp device driver closed down the FCP device * to limit the performance impact from possible I/O command timeouts. * User action: * Check for problems on the local fibre link, ensure that fibre optics are * clean and functional, and all cables are properly plugged. * After the repair action, you can manually recover the FCP device by * writing "0" into its "failed" sysfs attribute. * If recovery through sysfs is not possible, set the CHPID of the device * offline and back online on the service element. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: <stable@vger.kernel.org> #2.6.30+ Link: https://lore.kernel.org/r/20191001104949.42810-1-maier@linux.ibm.comReviewed-by:
Jens Remus <jremus@linux.ibm.com> Reviewed-by:
Benjamin Block <bblock@linux.ibm.com> Signed-off-by:
Steffen Maier <maier@linux.ibm.com> Signed-off-by:
-
Colin Ian King authored
commit 153c5d81 upstream. Currently the exit return path when sme->key_idx >= NUM_WEPKEYS is via label 'exit' and this checks if result is non-zero, however result has not been initialized and contains garbage. Fix this by replacing the goto with a return with the error code. Addresses-Coverity: ("Uninitialized scalar variable") Fixes: 0ca6d8e7 ("Staging: wlan-ng: replace switch-case statements with macro") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191014110201.9874-1-colin.king@canonical.comSigned-off-by:
-
Paul Burton authored
commit b42aa3fd upstream. build_restore_pagemask() will restore the value of register $1/$at when its restore_scratch argument is non-zero, and aims to do so by filling a branch delay slot. Commit 0b24cae4 ("MIPS: Add missing EHB in mtc0 -> mfc0 sequence.") added an EHB instruction (Execution Hazard Barrier) prior to restoring $1 from a KScratch register, in order to resolve a hazard that can result in stale values of the KScratch register being observed. In particular, P-class CPUs from MIPS with out of order execution pipelines such as the P5600 & P6600 are affected. Unfortunately this EHB instruction was inserted in the branch delay slot causing the MFC0 instruction which performs the restoration to no longer execute along with the branch. The result is that the $1 register isn't actually restored, ie. the TLB refill exception handler clobbers it - which is exactly the problem the EHB is meant to avoid for the P-class CPUs. Similarly build_get_pgd_vmalloc() will restore the value of $1/$at when its mode argument equals refill_scratch, and suffers from the same problem. Fix this by in both cases moving the EHB earlier in the emitted code. There's no reason it needs to immediately precede the MFC0 - it simply needs to be between the MTC0 & MFC0. This bug only affects Cavium Octeon systems which use build_fast_tlb_refill_handler(). Signed-off-by:
Paul Burton <paulburton@kernel.org> Fixes: 0b24cae4 ("MIPS: Add missing EHB in mtc0 -> mfc0 sequence.") Cc: Dmitry Korotin <dkorotin@wavecomp.com> Cc: stable@vger.kernel.org # v3.15+ Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Johan Hovold authored
commit 7a6f22d7 upstream. Fix broken read implementation, which could be used to trigger slab info leaks. The driver failed to check if the custom ring buffer was still empty when waking up after having waited for more data. This would happen on every interrupt-in completion, even if no data had been added to the ring buffer (e.g. on disconnect events). Due to missing sanity checks and uninitialised (kmalloced) ring-buffer entries, this meant that huge slab info leaks could easily be triggered. Note that the empty-buffer check after wakeup is enough to fix the info leak on disconnect, but let's clear the buffer on allocation and add a sanity check to read() to prevent further leaks. Fixes: 2824bd25 ("[PATCH] USB: add ldusb driver") Cc: stable <stable@vger.kernel.org> # 2.6.13 Reported-by: syzbot+6fe95b826644f7f12b0b@syzkaller.appspotmail.com Signed-off-by:
Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191018151955.25135-2-johan@kernel.orgSigned-off-by:
-
Johan Hovold authored
commit 7a759197 upstream. A recent commit addressing a runtime PM use-count regression, introduced a use-after-free by not making sure we held a reference to the struct usb_interface for the lifetime of the driver data. Fixes: 9a315358 ("USB: usblp: fix runtime PM after driver unbind") Cc: stable <stable@vger.kernel.org> Reported-by: syzbot+cd24df4d075c319ebfc5@syzkaller.appspotmail.com Signed-off-by:
-
Johan Hovold authored
commit b14a3904 upstream. If disconnect() races with release() after a process has been interrupted, release() could end up returning early and the driver would fail to free its driver data. Fixes: 2824bd25 ("[PATCH] USB: add ldusb driver") Cc: stable <stable@vger.kernel.org> # 2.6.13 Signed-off-by:
-
Johan Hovold authored
commit 6f1d1dc8 upstream. Fix races between closing a port and opening or closing another port on the same device which could lead to a failure to start or stop the shared interrupt URB. The latter could potentially cause a use-after-free or worse in the completion handler on driver unbind. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Gustavo A. R. Silva authored
commit b987b66a upstream. It seems that the right variable to use in this case is *i*, instead of *n*, otherwise there is an undefined behavior when right shifiting by more than 31 bits when multiplying n by 8; notice that *n* can take values equal or greater than 4 (4, 8, 16, ...). Also, notice that under the current conditions (bl = 3), we are skiping the handling of bytes 3, 7, 31... So, fix this by updating this logic and limit *bl* up to 4 instead of up to 3. This fix is based on function udc_stuff_fifo(). Addresses-Coverity-ID: 1454834 ("Bad bit shift operation") Fixes: 24a28e42 ("USB: gadget driver for LPC32xx") Cc: stable@vger.kernel.org Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Link: https://lore.kernel.org/r/20191014191830.GA10721@embeddedorSigned-off-by:
-
Lukas Wunner authored
commit 94989e31 upstream. Przemysław Kopa reports that since commit b516ea58 ("PCI: Enable NVIDIA HDA controllers"), the discrete GPU Nvidia GeForce GT 540M on his 2011 Samsung laptop refuses to runtime suspend, resulting in a power regression and excessive heat. Rivera Valdez witnesses the same issue with a GeForce GT 525M (GF108M) of the same era, as does another Arch Linux user named "R0AR" with a more recent GeForce GTX 1050 Ti (GP107M). The commit exposes the discrete GPU's HDA controller and all four codecs on the controller do not set the CLKSTOP and EPSS bits in the Supported Power States Response. They also do not set the PS-ClkStopOk bit in the Get Power State Response. hda_codec_runtime_suspend() therefore does not call snd_hdac_codec_link_down(), which prevents each codec and the PCI device from runtime suspending. The same issue is present on some AMD discrete GPUs and we addressed it by forcing runtime PM despite the bits not being set, see commit 57cb54e5 ("ALSA: hda - Force to link down at runtime suspend on ATI/AMD HDMI"). Do the same for Nvidia HDMI codecs. Fixes: b516ea58 ("PCI: Enable NVIDIA HDA controllers") Link: https://bbs.archlinux.org/viewtopic.php?pid=1865512 Link: https://bugs.freedesktop.org/show_bug.cgi?id=75985#c81Reported-by:
Przemysław Kopa <prymoo@gmail.com> Reported-by:
Rivera Valdez <riveravaldez@ysinembargo.com> Signed-off-by:
Lukas Wunner <lukas@wunner.de> Cc: Daniel Drake <dan@reactivated.net> Cc: stable@vger.kernel.org # v5.3+ Link: https://lore.kernel.org/r/3086bc75135c1e3567c5bc4f3cc4ff5cbf7a56c2.1571324194.git.lukas@wunner.deSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Szabolcs Szőke authored
commit 7571b6a1 upstream. BOSS Katana amplifiers cannot be used for recording or playback if quirks are applied BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=195223Signed-off-by:
Szabolcs Szőke <szszoke.code@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191011171937.8013-1-szszoke.code@gmail.comSigned-off-by:
-
Daniel Drake authored
commit 8c8967a7 upstream. On Asus MJ401TA (with Realtek ALC256), the headset mic is connected to pin 0x19, with default configuration value 0x411111f0 (indicating no physical connection). Enable this by quirking the pin. Mic jack detection was also tested and found to be working. This enables use of the headset mic on this product. Signed-off-by:
Daniel Drake <drake@endlessm.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191017081501.17135-1-drake@endlessm.comSigned-off-by:
-
Kailang Yang authored
commit 83629532 upstream. Support new codec ALC711. Signed-off-by:
Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Johan Hovold authored
commit b6c03e5f upstream. If disconnect() races with release() after a process has been interrupted, release() could end up returning early and the driver would fail to free its driver data. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Matthew Wilcox (Oracle) authored
The RCU lock is insufficient to protect the radix tree iteration as a deletion from the tree can occur before we take the spinlock to tag the entry. In 4.19, this has manifested as a bug with the following trace: kernel BUG at lib/radix-tree.c:1429! invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 7 PID: 6935 Comm: syz-executor.2 Not tainted 4.19.36 #25 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:radix_tree_tag_set+0x200/0x2f0 lib/radix-tree.c:1429 Code: 00 00 5b 5d 41 5c 41 5d 41 5e 41 5f c3 48 89 44 24 10 e8 a3 29 7e fe 48 8b 44 24 10 48 0f ab 03 e9 d2 fe ff ff e8 90 29 7e fe <0f> 0b 48 c7 c7 e0 5a 87 84 e8 f0 e7 08 ff 4c 89 ef e8 4a ff ac fe RSP: 0018:ffff88837b13fb60 EFLAGS: 00010016 RAX: 0000000000040000 RBX: ffff8883c5515d58 RCX: ffffffff82cb2ef0 RDX: 0000000000000b72 RSI: ffffc90004cf2000 RDI: ffff8883c5515d98 RBP: ffff88837b13fb98 R08: ffffed106f627f7e R09: ffffed106f627f7e R10: 0000000000000001 R11: ffffed106f627f7d R12: 0000000000000004 R13: ffffea000d7fea80 R14: 1ffff1106f627f6f R15: 0000000000000002 FS: 00007fa1b8df2700(0000) GS:ffff8883e2fc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa1b8df1db8 CR3: 000000037d4d2001 CR4: 0000000000160ee0 Call Trace: memfd_tag_pins mm/memfd.c:51 [inline] memfd_wait_for_pins+0x2c5/0x12d0 mm/memfd.c:81 memfd_add_seals mm/memfd.c:215 [inline] memfd_fcntl+0x33d/0x4a0 mm/memfd.c:247 do_fcntl+0x589/0xeb0 fs/fcntl.c:421 __do_sys_fcntl fs/fcntl.c:463 [inline] __se_sys_fcntl fs/fcntl.c:448 [inline] __x64_sys_fcntl+0x12d/0x180 fs/fcntl.c:448 do_syscall_64+0xc8/0x580 arch/x86/entry/common.c:293 The problem does not occur in mainline due to the XArray rewrite which changed the locking to exclude modification of the tree during iteration. At the time, nobody realised this was a bugfix. Backport the locking changes to stable. Cc: stable@vger.kernel.org Reported-by:
zhong jiang <zhongjiang@huawei.com> Signed-off-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Xin Long authored
[ Upstream commit 63dfb793 ] syzbot reported a memory leak: BUG: memory leak, unreferenced object 0xffff888120b3d380 (size 64): backtrace: [...] slab_alloc mm/slab.c:3319 [inline] [...] kmem_cache_alloc+0x13f/0x2c0 mm/slab.c:3483 [...] sctp_bucket_create net/sctp/socket.c:8523 [inline] [...] sctp_get_port_local+0x189/0x5a0 net/sctp/socket.c:8270 [...] sctp_do_bind+0xcc/0x200 net/sctp/socket.c:402 [...] sctp_bindx_add+0x4b/0xd0 net/sctp/socket.c:497 [...] sctp_setsockopt_bindx+0x156/0x1b0 net/sctp/socket.c:1022 [...] sctp_setsockopt net/sctp/socket.c:4641 [inline] [...] sctp_setsockopt+0xaea/0x2dc0 net/sctp/socket.c:4611 [...] sock_common_setsockopt+0x38/0x50 net/core/sock.c:3147 [...] __sys_setsockopt+0x10f/0x220 net/socket.c:2084 [...] __do_sys_setsockopt net/socket.c:2100 [inline] It was caused by when sending msgs without binding a port, in the path: inet_sendmsg() -> inet_send_prepare() -> inet_autobind() -> .get_port/sctp_get_port(), sp->bind_hash will be set while bp->port is not. Later when binding another port by sctp_setsockopt_bindx(), a new bucket will be created as bp->port is not set. sctp's autobind is supposed to call sctp_autobind() where it does all things including setting bp->port. Since sctp_autobind() is called in sctp_sendmsg() if the sk is not yet bound, it should have skipped the auto bind. THis patch is to avoid calling inet_autobind() in inet_send_prepare() by changing sctp_prot .no_autobind with true, also remove the unused .get_port. Reported-by: syzbot+d44f7bbebdea49dbc84a@syzkaller.appspotmail.com Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Biao Huang authored
[ Upstream commit e497c20e ] disable ptp_ref_clk in suspend flow, and enable it in resume flow. Fixes: f573c0b9 ("stmmac: move stmmac_clk, pclk, clk_ptp_ref and stmmac_rst to platform structure") Signed-off-by:
Biao Huang <biao.huang@mediatek.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit c7a42eb4 ] We need a similar fix for ipv6 as Commit 0761680d ("net: ipv4: fix listify ip_rcv_finish in case of forwarding") does for ipv4. This issue can be reprocuded by syzbot since Commit 323ebb61 ("net: use listified RX for handling GRO_NORMAL skbs") on net-next. The call trace was: kernel BUG at include/linux/skbuff.h:2225! RIP: 0010:__skb_pull include/linux/skbuff.h:2225 [inline] RIP: 0010:skb_pull+0xea/0x110 net/core/skbuff.c:1902 Call Trace: sctp_inq_pop+0x2f1/0xd80 net/sctp/inqueue.c:202 sctp_endpoint_bh_rcv+0x184/0x8d0 net/sctp/endpointola.c:385 sctp_inq_push+0x1e4/0x280 net/sctp/inqueue.c:80 sctp_rcv+0x2807/0x3590 net/sctp/input.c:256 sctp6_rcv+0x17/0x30 net/sctp/ipv6.c:1049 ip6_protocol_deliver_rcu+0x2fe/0x1660 net/ipv6/ip6_input.c:397 ip6_input_finish+0x84/0x170 net/ipv6/ip6_input.c:438 NF_HOOK include/linux/netfilter.h:305 [inline] NF_HOOK include/linux/netfilter.h:299 [inline] ip6_input+0xe4/0x3f0 net/ipv6/ip6_input.c:447 dst_input include/net/dst.h:442 [inline] ip6_sublist_rcv_finish+0x98/0x1e0 net/ipv6/ip6_input.c:84 ip6_list_rcv_finish net/ipv6/ip6_input.c:118 [inline] ip6_sublist_rcv+0x80c/0xcf0 net/ipv6/ip6_input.c:282 ipv6_list_rcv+0x373/0x4b0 net/ipv6/ip6_input.c:316 __netif_receive_skb_list_ptype net/core/dev.c:5049 [inline] __netif_receive_skb_list_core+0x5fc/0x9d0 net/core/dev.c:5097 __netif_receive_skb_list net/core/dev.c:5149 [inline] netif_receive_skb_list_internal+0x7eb/0xe60 net/core/dev.c:5244 gro_normal_list.part.0+0x1e/0xb0 net/core/dev.c:5757 gro_normal_list net/core/dev.c:5755 [inline] gro_normal_one net/core/dev.c:5769 [inline] napi_frags_finish net/core/dev.c:5782 [inline] napi_gro_frags+0xa6a/0xea0 net/core/dev.c:5855 tun_get_user+0x2e98/0x3fa0 drivers/net/tun.c:1974 tun_chr_write_iter+0xbd/0x156 drivers/net/tun.c:2020 Fixes: d8269e2c ("net: ipv6: listify ipv6_rcv() and ip6_rcv_finish()") Fixes: 323ebb61 ("net: use listified RX for handling GRO_NORMAL skbs") Reported-by: syzbot+eb349eeee854e389c36d@syzkaller.appspotmail.com Reported-by: syzbot+4a0643a653ac375612d1@syzkaller.appspotmail.com Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
-
Cédric Le Goater authored
[ Upstream commit 11d49ce9 ] pSeries machines on POWER9 processors can run with the XICS (legacy) interrupt mode or with the XIVE exploitation interrupt mode. These interrupt contollers have different interfaces for interrupt management : XICS uses hcalls and XIVE loads and stores on a page. H_EOI being a XICS interface the enable_scrq_irq() routine can fail when the machine runs in XIVE mode. Fix that by calling the EOI handler of the interrupt chip. Fixes: f23e0643 ("ibmvnic: Clear pending interrupt after device reset") Signed-off-by:
Cédric Le Goater <clg@kaod.org> Signed-off-by:
-
Thomas Bogendoerfer authored
[ Upstream commit 61c1d33d ] Commit 7f683b92 ("i825xx: switch to switch to dma_alloc_attrs") switched dma allocation over to dma_alloc_attr, but didn't convert the SNI part to request consistent DMA memory. This broke sni_82596 since driver doesn't do dma_cache_sync for performance reasons. Fix this by using different DMA_ATTRs for lasi_82596 and sni_82596. Fixes: 7f683b92 ("i825xx: switch to switch to dma_alloc_attrs") Signed-off-by:
Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit 92696286 ] phydev->dev_flags is entirely dependent on the PHY device driver which is going to be used, setting the internal GENET PHY revision in those bits only makes sense when drivers/net/phy/bcm7xxx.c is the PHY driver being used. Fixes: 487320c5 ("net: bcmgenet: communicate integrated PHY revision to PHY driver") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Acked-by:
Doug Berger <opendmb@gmail.com> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit efb86fed ] The RGMII_MODE_EN bit value was 0 for GENET versions 1 through 3, and became 6 for GENET v4 and above, account for that difference. Fixes: aa09677c ("net: bcmgenet: add MDIO routines") Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 39f13ea2 ] tc_ctl_action() has the ability to loop forever if tcf_action_add() returns -EAGAIN. This special case has been done in case a module needed to be loaded, but it turns out that tcf_add_notify() could also return -EAGAIN if the socket sk_rcvbuf limit is hit. We need to separate the two cases, and only loop for the module loading case. While we are at it, add a limit of 10 attempts since unbounded loops are always scary. syzbot repro was something like : socket(PF_NETLINK, SOCK_RAW|SOCK_NONBLOCK, NETLINK_ROUTE) = 3 write(3, ..., 38) = 38 setsockopt(3, SOL_SOCKET, SO_RCVBUF, [0], 4) = 0 sendmsg(3, {msg_name(0)=NULL, msg_iov(1)=[{..., 388}], msg_controllen=0, msg_flags=0x10}, ...) NMI backtrace for cpu 0 CPU: 0 PID: 1054 Comm: khungtaskd Not tainted 5.4.0-rc1+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 nmi_cpu_backtrace.cold+0x70/0xb2 lib/nmi_backtrace.c:101 nmi_trigger_cpumask_backtrace+0x23b/0x28b lib/nmi_backtrace.c:62 arch_trigger_cpumask_backtrace+0x14/0x20 arch/x86/kernel/apic/hw_nmi.c:38 trigger_all_cpu_backtrace include/linux/nmi.h:146 [inline] check_hung_uninterruptible_tasks kernel/hung_task.c:205 [inline] watchdog+0x9d0/0xef0 kernel/hung_task.c:289 kthread+0x361/0x430 kernel/kthread.c:255 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352 Sending NMI from CPU 0 to CPUs 1: NMI backtrace for cpu 1 CPU: 1 PID: 8859 Comm: syz-executor910 Not tainted 5.4.0-rc1+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:arch_local_save_flags arch/x86/include/asm/paravirt.h:751 [inline] RIP: 0010:lockdep_hardirqs_off+0x1df/0x2e0 kernel/locking/lockdep.c:3453 Code: 5c 08 00 00 5b 41 5c 41 5d 5d c3 48 c7 c0 58 1d f3 88 48 ba 00 00 00 00 00 fc ff df 48 c1 e8 03 80 3c 10 00 0f 85 d3 00 00 00 <48> 83 3d 21 9e 99 07 00 0f 84 b9 00 00 00 9c 58 0f 1f 44 00 00 f6 RSP: 0018:ffff8880a6f3f1b8 EFLAGS: 00000046 RAX: 1ffffffff11e63ab RBX: ffff88808c9c6080 RCX: 0000000000000000 RDX: dffffc0000000000 RSI: 0000000000000000 RDI: ffff88808c9c6914 RBP: ffff8880a6f3f1d0 R08: ffff88808c9c6080 R09: fffffbfff16be5d1 R10: fffffbfff16be5d0 R11: 0000000000000003 R12: ffffffff8746591f R13: ffff88808c9c6080 R14: ffffffff8746591f R15: 0000000000000003 FS: 00000000011e4880(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffff600400 CR3: 00000000a8920000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: trace_hardirqs_off+0x62/0x240 kernel/trace/trace_preemptirq.c:45 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:108 [inline] _raw_spin_lock_irqsave+0x6f/0xcd kernel/locking/spinlock.c:159 __wake_up_common_lock+0xc8/0x150 kernel/sched/wait.c:122 __wake_up+0xe/0x10 kernel/sched/wait.c:142 netlink_unlock_table net/netlink/af_netlink.c:466 [inline] netlink_unlock_table net/netlink/af_netlink.c:463 [inline] netlink_broadcast_filtered+0x705/0xb80 net/netlink/af_netlink.c:1514 netlink_broadcast+0x3a/0x50 net/netlink/af_netlink.c:1534 rtnetlink_send+0xdd/0x110 net/core/rtnetlink.c:714 tcf_add_notify net/sched/act_api.c:1343 [inline] tcf_action_add+0x243/0x370 net/sched/act_api.c:1362 tc_ctl_action+0x3b5/0x4bc net/sched/act_api.c:1410 rtnetlink_rcv_msg+0x463/0xb00 net/core/rtnetlink.c:5386 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477 rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5404 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0x531/0x710 net/netlink/af_netlink.c:1328 netlink_sendmsg+0x8a5/0xd60 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:637 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:657 ___sys_sendmsg+0x803/0x920 net/socket.c:2311 __sys_sendmsg+0x105/0x1d0 net/socket.c:2356 __do_sys_sendmsg net/socket.c:2365 [inline] __se_sys_sendmsg net/socket.c:2363 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2363 do_syscall_64+0xfa/0x760 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x440939 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by: syzbot+cf0adbb9c28c8866c788@syzkaller.appspotmail.com Signed-off-by:
-
Stefano Brivio authored
[ Upstream commit 595e0651 ] ...instead of -EINVAL. An issue was found with older kernel versions while unplugging a NFS client with pending RPCs, and the wrong error code here prevented it from recovering once link is back up with a configured address. Incidentally, this is not an issue anymore since commit 4f8943f8 ("SUNRPC: Replace direct task wakeups from softirq context"), included in 5.2-rc7, had the effect of decoupling the forwarding of this error by using SO_ERROR in xs_wake_error(), as pointed out by Benjamin Coddington. To the best of my knowledge, this isn't currently causing any further issue, but the error code doesn't look appropriate anyway, and we might hit this in other paths as well. In detail, as analysed by Gonzalo Siero, once the route is deleted because the interface is down, and can't be resolved and we return -EINVAL here, this ends up, courtesy of inet_sk_rebuild_header(), as the socket error seen by tcp_write_err(), called by tcp_retransmit_timer(). In turn, tcp_write_err() indirectly calls xs_error_report(), which wakes up the RPC pending tasks with a status of -EINVAL. This is then seen by call_status() in the SUN RPC implementation, which aborts the RPC call calling rpc_exit(), instead of handling this as a potentially temporary condition, i.e. as a timeout. Return -EINVAL only if the input parameters passed to ip_route_output_key_hash_rcu() are actually invalid (this is the case if the specified source address is multicast, limited broadcast or all zeroes), but return -ENETUNREACH in all cases where, at the given moment, the given source address doesn't allow resolving the route. While at it, drop the initialisation of err to -ENETUNREACH, which was added to __ip_route_output_key() back then by commit 0315e382 ("net: Fix behaviour of unreachable, blackhole and prohibit routes"), but actually had no effect, as it was, and is, overwritten by the fib_lookup() return code assignment, and anyway ignored in all other branches, including the if (fl4->saddr) one: I find this rather confusing, as it would look like -ENETUNREACH is the "default" error, while that statement has no effect. Also note that after commit fc75fc83 ("ipv4: dont create routes on down devices"), we would get -ENETUNREACH if the device is down, but -EINVAL if the source address is specified and we can't resolve the route, and this appears to be rather inconsistent. Reported-by:
Stefan Walter <walteste@inf.ethz.ch> Analysed-by:
Benjamin Coddington <bcodding@redhat.com> Analysed-by:
Gonzalo Siero <gsierohu@redhat.com> Signed-off-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
-
Wei Wang authored
[ Upstream commit 5018c596 ] Jesse and Ido reported the following race condition: <CPU A, t0> - Received packet A is forwarded and cached dst entry is taken from the nexthop ('nhc->nhc_rth_input'). Calls skb_dst_set() <t1> - Given Jesse has busy routers ("ingesting full BGP routing tables from multiple ISPs"), route is added / deleted and rt_cache_flush() is called <CPU B, t2> - Received packet B tries to use the same cached dst entry from t0, but rt_cache_valid() is no longer true and it is replaced in rt_cache_route() by the newer one. This calls dst_dev_put() on the original dst entry which assigns the blackhole netdev to 'dst->dev' <CPU A, t3> - dst_input(skb) is called on packet A and it is dropped due to 'dst->dev' being the blackhole netdev There are 2 issues in the v4 routing code: 1. A per-netns counter is used to do the validation of the route. That means whenever a route is changed in the netns, users of all routes in the netns needs to redo lookup. v6 has an implementation of only updating fn_sernum for routes that are affected. 2. When rt_cache_valid() returns false, rt_cache_route() is called to throw away the current cache, and create a new one. This seems unnecessary because as long as this route does not change, the route cache does not need to be recreated. To fully solve the above 2 issues, it probably needs quite some code changes and requires careful testing, and does not suite for net branch. So this patch only tries to add the deleted cached rt into the uncached list, so user could still be able to use it to receive packets until it's done. Fixes: 95c47f9c ("ipv4: call dst_dev_put() properly") Signed-off-by:
Wei Wang <weiwan@google.com> Reported-by:
Ido Schimmel <idosch@idosch.org> Reported-by:
Jesse Hathaway <jesse@mbuki-mvuki.org> Tested-by:
Martin KaFai Lau <kafai@fb.com> Cc: David Ahern <dsahern@gmail.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Yi Li authored
commit b918c430 upstream. mount.ocfs2 failed when reading ocfs2 filesystem superblock encounters an error. ocfs2_initialize_super() returns before allocating ocfs2_wq. ocfs2_dismount_volume() triggers the following panic. Oct 15 16:09:27 cnwarekv-205120 kernel: On-disk corruption discovered.Please run fsck.ocfs2 once the filesystem is unmounted. Oct 15 16:09:27 cnwarekv-205120 kernel: (mount.ocfs2,22804,44): ocfs2_read_locked_inode:537 ERROR: status = -30 Oct 15 16:09:27 cnwarekv-205120 kernel: (mount.ocfs2,22804,44): ocfs2_init_global_system_inodes:458 ERROR: status = -30 Oct 15 16:09:27 cnwarekv-205120 kernel: (mount.ocfs2,22804,44): ocfs2_init_global_system_inodes:491 ERROR: status = -30 Oct 15 16:09:27 cnwarekv-205120 kernel: (mount.ocfs2,22804,44): ocfs2_initialize_super:2313 ERROR: status = -30 Oct 15 16:09:27 cnwarekv-205120 kernel: (mount.ocfs2,22804,44): ocfs2_fill_super:1033 ERROR: status = -30 ------------[ cut here ]------------ Oops: 0002 [#1] SMP NOPTI CPU: 1 PID: 11753 Comm: mount.ocfs2 Tainted: G E 4.14.148-200.ckv.x86_64 #1 Hardware name: Sugon H320-G30/35N16-US, BIOS 0SSDX017 12/21/2018 task: ffff967af0520000 task.stack: ffffa5f05484000 RIP: 0010:mutex_lock+0x19/0x20 Call Trace: flush_workqueue+0x81/0x460 ocfs2_shutdown_local_alloc+0x47/0x440 [ocfs2] ocfs2_dismount_volume+0x84/0x400 [ocfs2] ocfs2_fill_super+0xa4/0x1270 [ocfs2] ? ocfs2_initialize_super.isa.211+0xf20/0xf20 [ocfs2] mount_bdev+0x17f/0x1c0 mount_fs+0x3a/0x160 Link: http://lkml.kernel.org/r/1571139611-24107-1-git-send-email-yili@winhong.comSigned-off-by:
Yi Li <yilikernel@gmail.com> Reviewed-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Alex Deucher authored
[ Upstream commit 8d13c187 ] This reverts commit 6f7fe9a9. This breaks some boards. Maybe just enable this on PPC for now? Bug: https://bugzilla.kernel.org/show_bug.cgi?id=205147Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Song Liu authored
[ Upstream commit 3874d73e ] The message should match the parameter, i.e. raid0.default_layout. Fixes: c84a1372 ("md/raid0: avoid RAID0 data corruption due to layout confusion.") Cc: NeilBrown <neilb@suse.de> Reported-by:
Ivan Topolsky <doktor.yak@gmail.com> Signed-off-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
-
Dan Williams authored
[ Upstream commit 09d6ac8d ] Commit c312ef17 "libata/ahci: Drop PCS quirk for Denverton and beyond" got the polarity wrong on the check for which board-ids should have the quirk applied. The board type board_ahci_pcs7 is defined at the end of the list such that "pcs7" boards can be special cased in the future if they need the quirk. All prior Intel board ids "< board_ahci_pcs7" should proceed with applying the quirk. Reported-by:
Andreas Friedrich <afrie@gmx.net> Reported-by:
Stephen Douthit <stephend@silicom-usa.com> Fixes: c312ef17 ("libata/ahci: Drop PCS quirk for Denverton and beyond") Cc: <stable@vger.kernel.org> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Jacob Keller authored
[ Upstream commit 82fdd12b ] The namespace.pl script does not work properly if objtree is not set to an absolute path. The do_nm function is run from within the find function, which changes directories. Because of this, appending objtree, $File::Find::dir, and $source, will return a path which is not valid from the current directory. This used to work when objtree was set to an absolute path when using "make namespacecheck". It appears to have not worked when calling ./scripts/namespace.pl directly. This behavior was changed in 7e1c0477 ("kbuild: Use relative path for $(objtree)", 2014-05-14) Rather than fixing the Makefile to set objtree to an absolute path, just fix namespace.pl to work when srctree and objtree are relative. Also fix the script to use an absolute path for these by default. Use the File::Spec module for this purpose. It's been part of perl 5 since 5.005. The curdir() function is used to get the current directory when the objtree and srctree aren't set in the environment. rel2abs() is used to convert possibly relative objtree and srctree environment variables to absolute paths. Finally, the catfile() function is used instead of string appending paths together, since this is more robust when joining paths together. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Tested-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Kai-Heng Feng authored
[ Upstream commit a54cdeeb ] r8152 may fail to establish network connection after resume from system suspend. If the USB port connects to r8152 lost its power during system suspend, the MAC address was written before is lost. The reason is that The MAC address doesn't get written again in its reset_resume callback. So let's set MAC address again in reset_resume callback. Also remove unnecessary lock as no other locking attempt will happen during reset_resume. Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
-
Randy Dunlap authored
[ Upstream commit 2105b52e ] This textsearch code example does not need the '\' escapes and they can be misleading to someone reading the example. Also, gcc and sparse warn that the "\%d" is an unknown escape sequence. Fixes: 5968a70d ("textsearch: fix kernel-doc warnings and add kernel-api section") Signed-off-by:
-
Yizhuo authored
[ Upstream commit 53de429f ] In function mdio_sc_cfg_reg_write(), variable "reg_value" could be uninitialized if regmap_read() fails. However, "reg_value" is used to decide the control flow later in the if statement, which is potentially unsafe. Signed-off-by:
Yizhuo <yzhai003@ucr.edu> Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit 25b69a88 ] 'exit' functions should be marked as __exit, not __init. Fixes: 85cc0288 ("mips: make loongsoon serial driver explicitly modular") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
Paul Burton <paul.burton@mips.com> Cc: chenhc@lemote.com Cc: ralf@linux-mips.org Cc: jhogan@kernel.org Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: kernel-janitors@vger.kernel.org Signed-off-by:
-
Wen Yang authored
[ Upstream commit f32eb9d8 ] of_node_put needs to be called when the device node which is got from of_get_child_by_name finished using. irq_domain_add_linear() also calls of_node_get() to increase refcount, so irq_domain will not be affected when it is released. Fixes: d8652956 ("net: dsa: realtek-smi: Add Realtek SMI driver") Signed-off-by:
Wen Yang <wenyang@linux.alibaba.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Pablo Neira Ayuso authored
[ Upstream commit 34a4c95a ] BH must be disabled when invoking nf_conncount_gc_list() to perform garbage collection, otherwise deadlock might happen. nf_conncount_add+0x1f/0x50 [nf_conncount] nft_connlimit_eval+0x4c/0xe0 [nft_connlimit] nft_dynset_eval+0xb5/0x100 [nf_tables] nft_do_chain+0xea/0x420 [nf_tables] ? sch_direct_xmit+0x111/0x360 ? noqueue_init+0x10/0x10 ? __qdisc_run+0x84/0x510 ? tcp_packet+0x655/0x1610 [nf_conntrack] ? ip_finish_output2+0x1a7/0x430 ? tcp_error+0x130/0x150 [nf_conntrack] ? nf_conntrack_in+0x1fc/0x4c0 [nf_conntrack] nft_do_chain_ipv4+0x66/0x80 [nf_tables] nf_hook_slow+0x44/0xc0 ip_rcv+0xb5/0xd0 ? ip_rcv_finish_core.isra.19+0x360/0x360 __netif_receive_skb_one_core+0x52/0x70 netif_receive_skb_internal+0x34/0xe0 napi_gro_receive+0xba/0xe0 e1000_clean_rx_irq+0x1e9/0x420 [e1000e] e1000e_poll+0xbe/0x290 [e1000e] net_rx_action+0x149/0x3b0 __do_softirq+0xde/0x2d8 irq_exit+0xba/0xc0 do_IRQ+0x85/0xd0 common_interrupt+0xf/0xf </IRQ> RIP: 0010:nf_conncount_gc_list+0x3b/0x130 [nf_conncount] Fixes: 2f971a8f ("netfilter: nf_conncount: move all list iterations under spinlock") Reported-by:
Laura Garcia Liebana <nevola@gmail.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Miaoqing Pan authored
[ Upstream commit 8ed31a26 ] If the interface type is P2P_DEVICE or NAN, read the file of '/sys/kernel/debug/ieee80211/phyx/netdev:wlanx/aqm' will get a NULL pointer dereference. As for those interface type, the pointer sdata->vif.txq is NULL. Unable to handle kernel NULL pointer dereference at virtual address 00000011 CPU: 1 PID: 30936 Comm: cat Not tainted 4.14.104 #1 task: ffffffc0337e4880 task.stack: ffffff800cd20000 PC is at ieee80211_if_fmt_aqm+0x34/0xa0 [mac80211] LR is at ieee80211_if_fmt_aqm+0x34/0xa0 [mac80211] [...] Process cat (pid: 30936, stack limit = 0xffffff800cd20000) [...] [<ffffff8000b7cd00>] ieee80211_if_fmt_aqm+0x34/0xa0 [mac80211] [<ffffff8000b7c414>] ieee80211_if_read+0x60/0xbc [mac80211] [<ffffff8000b7ccc4>] ieee80211_if_read_aqm+0x28/0x30 [mac80211] [<ffffff80082eff94>] full_proxy_read+0x2c/0x48 [<ffffff80081eef00>] __vfs_read+0x2c/0xd4 [<ffffff80081ef084>] vfs_read+0x8c/0x108 [<ffffff80081ef494>] SyS_read+0x40/0x7c Signed-off-by:
Miaoqing Pan <miaoqing@codeaurora.org> Acked-by:
Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/1569549796-8223-1-git-send-email-miaoqing@codeaurora.org [trim useless data from commit message] Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Miaoqing Pan authored
[ Upstream commit b501426c ] If the interface is not in MESH mode, the command 'iw wlanx mpath del' will cause kernel panic. The root cause is null pointer access in mpp_flush_by_proxy(), as the pointer 'sdata->u.mesh.mpp_paths' is NULL for non MESH interface. Unable to handle kernel NULL pointer dereference at virtual address 00000068 [...] PC is at _raw_spin_lock_bh+0x20/0x5c LR is at mesh_path_del+0x1c/0x17c [mac80211] [...] Process iw (pid: 4537, stack limit = 0xd83e0238) [...] [<c021211c>] (_raw_spin_lock_bh) from [<bf8c7648>] (mesh_path_del+0x1c/0x17c [mac80211]) [<bf8c7648>] (mesh_path_del [mac80211]) from [<bf6cdb7c>] (extack_doit+0x20/0x68 [compat]) [<bf6cdb7c>] (extack_doit [compat]) from [<c05c309c>] (genl_rcv_msg+0x274/0x30c) [<c05c309c>] (genl_rcv_msg) from [<c05c25d8>] (netlink_rcv_skb+0x58/0xac) [<c05c25d8>] (netlink_rcv_skb) from [<c05c2e14>] (genl_rcv+0x20/0x34) [<c05c2e14>] (genl_rcv) from [<c05c1f90>] (netlink_unicast+0x11c/0x204) [<c05c1f90>] (netlink_unicast) from [<c05c2420>] (netlink_sendmsg+0x30c/0x370) [<c05c2420>] (netlink_sendmsg) from [<c05886d0>] (sock_sendmsg+0x70/0x84) [<c05886d0>] (sock_sendmsg) from [<c0589f4c>] (___sys_sendmsg.part.3+0x188/0x228) [<c0589f4c>] (___sys_sendmsg.part.3) from [<c058add4>] (__sys_sendmsg+0x4c/0x70) [<c058add4>] (__sys_sendmsg) from [<c0208c80>] (ret_fast_syscall+0x0/0x44) Code: e2822c02 e2822001 e5832004 f590f000 (e1902f9f) ---[ end trace bbd717600f8f884d ]--- Signed-off-by:
-
Ross Lagerwall authored
[ Upstream commit df359f0d ] Other parts of the kernel expect these nonblocking EFI callbacks to exist and crash when running under Xen. Since the implementations of xen_efi_set_variable() and xen_efi_query_variable_info() do not take any locks, use them for the nonblocking callbacks too. Signed-off-by:
Ross Lagerwall <ross.lagerwall@citrix.com> Reviewed-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
-
