- 24 Jul, 2020 22 commits
-
-
周琰杰 (Zhou Yanjie) authored
Add support for probing the phy-jz4770 driver on the JZ4780 SoC, the X1000 SoC and the X1830 SoC from Ingenic. Tested-by:
周正 (Zhou Zheng) <sernia.zhou@foxmail.com> Co-developed-by:
漆鹏振 (Qi Pengzhen) <aric.pzqi@ingenic.com> Signed-off-by:
周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Signed-off-by:
Felipe Balbi <balbi@kernel.org>
-
周琰杰 (Zhou Yanjie) authored
1.Modify the macro definition to unify "#define USBPCR_XXXX n" into the "#define USBPCR_XXXX (n << USBPCR_XXXX_LSB)" style, so as to unify the code style in the "jz4770_phy_init()" and simplify the code. 2.Remove unused macro definitions to simplify the code. Tested-by:
Paul Cercueil <paul@crapouillou.net> Signed-off-by:
-
周琰杰 (Zhou Yanjie) authored
Add the USB PHY bindings for the JZ4780 SoC, the X1000 SoC and the X1830 SoC from Ingenic. Tested-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Evgeny Novikov authored
Driver does not release memory for device on error handling paths in net2280_probe() when gadget_release() is not registered yet. The patch fixes the bug like in other similar drivers. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Evgeny Novikov <novikov@ispras.ru> Signed-off-by:
-
Pawel Laszczak authored
Patch split function cdns3_drd_switch_gadget and cdns3_drd_switch_host into: - cdns3_drd_host_on - cdns3_drd_host_off - cdns3_drd_gadget_on - cdns3_drd_gadgett_off These functions don't have any shared code so it's better to have smaller, faster and easier functions. Signed-off-by:
Pawel Laszczak <pawell@cadence.com> Reviewed-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
-
Pawel Laszczak authored
Some error code can be preserved, so we can remove overwriting error code returned by some functions. Signed-off-by:
-
Pawel Laszczak authored
Patch removes 'goto not_otg' instruction from cdns3_hw_role_state_machine function. Signed-off-by:
-
Pawel Laszczak authored
Patch adds 2 definitions that make it easier to understand the code. Reviewed-by:
-
Pawel Laszczak authored
Patch changes return type from int to bool for cdns3_is_host and cdns3_is_device functions. Reviewed-by:
-
Pawel Laszczak authored
IRQ_NONE can be returned indirect. Reviewed-by:
-
Pawel Laszczak authored
Patch deletes unnecessary != from condition statement in cdns3_drd_init function. Reviewed-by:
-
Pawel Laszczak authored
Patch remove some variables initialization from core.c and drd.c file. Reviewed-by:
-
Pawel Laszczak authored
Function is not used in driver so it can be removed. Signed-off-by:
-
Peter Chen authored
During the endpoint dequeue operation, it changes dequeued TRB as link TRB, when the endpoint is disabled and re-enabled, the DMA fetches the TRB before the link TRB, after it handles current TRB, the DMA pointer will advance to the TRB after link TRB, but enqueue and dequene variables don't know it due to no hardware interrupt at the time, when the next TRB is added to link TRB position, the DMA will not handle this TRB due to its pointer is already at the next TRB. See the trace log like below: file-storage-675 [001] d..1 86.585657: usb_ep_queue: ep0: req 00000000df9b3a4f length 0/0 sgs 0/0 stream 0 zsI status 0 --> 0 file-storage-675 [001] d..1 86.585663: cdns3_ep_queue: ep1out: req: 000000002ebce364, req buff 00000000f5bc96b4, length: 0/1024 zsi, status: -115, trb: [start:0, end:0: virt addr (null)], flags:0 SID: 0 file-storage-675 [001] d..1 86.585671: cdns3_prepare_trb: ep1out: trb 000000007f770303, dma buf: 0xbd195800, size: 1024, burst: 128 ctrl: 0x00000425 (C=1, T=0, ISP, IOC, Normal) SID:0 LAST_SID:0 file-storage-675 [001] d..1 86.585676: cdns3_ring: Ring contents for ep1out: Ring deq index: 0, trb: 000000007f770303 (virt), 0xc4003000 (dma) Ring enq index: 1, trb: 0000000049c1ba21 (virt), 0xc400300c (dma) free trbs: 38, CCS=1, PCS=1 @0x00000000c4003000 bd195800 80020400 00000425 @0x00000000c400300c c4003018 80020400 00001811 @0x00000000c4003018 bcfcc000 0000001f 00000426 @0x00000000c4003024 bcfce800 0000001f 00000426 ... irq/144-5b13000-698 [000] d... 87.619286: usb_gadget_giveback_request: ep1in: req 0000000031b832eb length 13/13 sgs 0/0 stream 0 zsI status 0 --> 0 file-storage-675 [001] d..1 87.619287: cdns3_ep_queue: ep1out: req: 000000002ebce364, req buff 00000000f5bc96b4, length: 0/1024 zsi, status: -115, trb: [start:0, end:0: virt addr 0x80020400c400300c], flags:0 SID: 0 file-storage-675 [001] d..1 87.619294: cdns3_prepare_trb: ep1out: trb 0000000049c1ba21, dma buf: 0xbd198000, size: 1024, burst: 128 ctrl: 0x00000425 (C=1, T=0, ISP, IOC, Normal) SID:0 LAST_SID:0 file-storage-675 [001] d..1 87.619297: cdns3_ring: Ring contents for ep1out: Ring deq index: 1, trb: 0000000049c1ba21 (virt), 0xc400300c (dma) Ring enq index: 2, trb: 0000000059b34b67 (virt), 0xc4003018 (dma) free trbs: 38, CCS=1, PCS=1 @0x00000000c4003000 bd195800 0000001f 00000427 @0x00000000c400300c bd198000 80020400 00000425 @0x00000000c4003018 bcfcc000 0000001f 00000426 @0x00000000c4003024 bcfce800 0000001f 00000426 ... file-storage-675 [001] d..1 87.619305: cdns3_doorbell_epx: ep1out, ep_trbaddr c4003018 file-storage-675 [001] .... 87.619308: usb_ep_queue: ep1out: req 000000002ebce364 length 0/1024 sgs 0/0 stream 0 zsI status -115 --> 0 irq/144-5b13000-698 [000] d..1 87.619315: cdns3_epx_irq: IRQ for ep1out: 01000c80 TRBERR , ep_traddr: c4003018 ep_last_sid: 00000000 use_streams: 0 irq/144-5b13000-698 [000] d..1 87.619395: cdns3_usb_irq: IRQ 00000008 = Hot Reset Fixes: f616c3bd ("usb: cdns3: Fix dequeue implementation") Cc: stable <stable@vger.kernel.org> Signed-off-by: -
Peter Chen authored
It doesn't need to enable/disable L1 on the fly for EP0 transfer, we only need to enable L1 after SET_CONFIGURATION. This code may be introduced by careless. Cc: Pawel Laszczak <pawell@cadence.com> Signed-off-by:
-
Evgeny Novikov authored
net2272_rdk1_probe() skips "i == 1" (BAR1) during allocation of resources. The patch does this on error hanling paths as well. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
-
Chunfeng Yun authored
Use readl_poll_timeout() to poll register status Cc: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Signed-off-by:
Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Marek Szyprowski authored
When gadget registration fails, one should not call usb_del_gadget_udc(). Ensure this by setting gadget->udc to NULL. Also in case of a failure there is no need to disable low-level hardware, so return immiedetly instead of jumping to error_init label. This fixes the following kernel NULL ptr dereference on gadget failure (can be easily triggered with g_mass_storage without any module parameters): dwc2 12480000.hsotg: dwc2_check_params: Invalid parameter besl=1 dwc2 12480000.hsotg: dwc2_check_params: Invalid parameter g_np_tx_fifo_size=1024 dwc2 12480000.hsotg: EPs: 16, dedicated fifos, 7808 entries in SPRAM Mass Storage Function, version: 2009/09/11 LUN: removable file: (no medium) no file given for LUN0 g_mass_storage 12480000.hsotg: failed to start g_mass_storage: -22 8<--- cut here --- Unable to handle kernel NULL pointer dereference at virtual address 00000104 pgd = (ptrval) [00000104] *pgd=00000000 Internal error: Oops: 805 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.8.0-rc5 #3133 Hardware name: Samsung Exynos (Flattened Device Tree) Workqueue: events deferred_probe_work_func PC is at usb_del_gadget_udc+0x38/0xc4 LR is at __mutex_lock+0x31c/0xb18 ... Process kworker/0:1 (pid: 12, stack limit = 0x(ptrval)) Stack: (0xef121db0 to 0xef122000) ... [<c076bf3c>] (usb_del_gadget_udc) from [<c0726bec>] (dwc2_hsotg_remove+0x10/0x20) [<c0726bec>] (dwc2_hsotg_remove) from [<c0711208>] (dwc2_driver_probe+0x57c/0x69c) [<c0711208>] (dwc2_driver_probe) from [<c06247c0>] (platform_drv_probe+0x6c/0xa4) [<c06247c0>] (platform_drv_probe) from [<c0621df4>] (really_probe+0x200/0x48c) [<c0621df4>] (really_probe) from [<c06221e8>] (driver_probe_device+0x78/0x1fc) [<c06221e8>] (driver_probe_device) from [<c061fcd4>] (bus_for_each_drv+0x74/0xb8) [<c061fcd4>] (bus_for_each_drv) from [<c0621b54>] (__device_attach+0xd4/0x16c) [<c0621b54>] (__device_attach) from [<c0620c98>] (bus_probe_device+0x88/0x90) [<c0620c98>] (bus_probe_device) from [<c06211b0>] (deferred_probe_work_func+0x3c/0xd0) [<c06211b0>] (deferred_probe_work_func) from [<c0149280>] (process_one_work+0x234/0x7dc) [<c0149280>] (process_one_work) from [<c014986c>] (worker_thread+0x44/0x51c) [<c014986c>] (worker_thread) from [<c0150b1c>] (kthread+0x158/0x1a0) [<c0150b1c>] (kthread) from [<c0100114>] (ret_from_fork+0x14/0x20) Exception stack(0xef121fb0 to 0xef121ff8) ... ---[ end trace 9724c2fc7cc9c982 ]--- While fixing this also fix the double call to dwc2_lowlevel_hw_disable() if dr_mode is set to USB_DR_MODE_PERIPHERAL. In such case low-level hardware is already disabled before calling usb_add_gadget_udc(). That function correctly preserves low-level hardware state, there is no need for the second unconditional dwc2_lowlevel_hw_disable() call. Fixes: 207324a3 ("usb: dwc2: Postponed gadget registration to the udc class driver") Acked-by:
Minas Harutyunyan <hminas@synopsys.com> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Michał Mirosław authored
Implement udc->pullup callback, so that udc_connect/disconnect work. This is needed for composite gadget, as it assumes udc_disconnect() actually works and calls its ->disconnect callback. Acked-by:
Cristian Birsan <cristian.birsan@microchip.com> Acked-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by:
-
Marek Szyprowski authored
When binding an UDC driver to the pending gadget fails in check_pending_gadget_drivers(), the usb_add_gadget_udc_release() function ends without waiting for the usb_gadget_state_work to finish, what in turn might cause the whole struct usb_gadget being freed by the caller before the usb_gadget_state_work being executed. This can be observed on some boards with USB Mass Storage gadget compiled-in and kernel booted without the needed module parameters: dwc2 12480000.hsotg: dwc2_check_params: Invalid parameter besl=1 dwc2 12480000.hsotg: dwc2_check_params: Invalid parameter g_np_tx_fifo_size=1024 dwc2 12480000.hsotg: EPs: 16, dedicated fifos, 7808 entries in SPRAM Mass Storage Function, version: 2009/09/11 LUN: removable file: (no medium) no file given for LUN0 g_mass_storage 12480000.hsotg: failed to start g_mass_storage: -22 dwc2: probe of 12480000.hsotg failed with error -22 8<--- cut here --- Unable to handle kernel NULL pointer dereference at virtual address 00000004 pgd = (ptrval) [00000004] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: CPU: 1 PID: 88 Comm: kworker/1:2 Not tainted 5.8.0-rc5-next-20200715-00062-gc5bb489ae825-dirty #8792 Hardware name: Samsung Exynos (Flattened Device Tree) Workqueue: 0x0 (rcu_gp) PC is at process_one_work+0x44/0x7dc ... Process kworker/1:2 (pid: 88, stack limit = 0x(ptrval)) Stack: (0xed9f1f00 to 0xed9f2000) ... [<c0148590>] (process_one_work) from [<c0148d6c>] (worker_thread+0x44/0x51c) [<c0148d6c>] (worker_thread) from [<c01500c0>] (kthread+0x158/0x1a0) [<c01500c0>] (kthread) from [<c0100114>] (ret_from_fork+0x14/0x20) Exception stack(0xed9f1fb0 to 0xed9f1ff8) ... ---[ end trace 5033c1326a62e5f3 ]--- note: kworker/1:2[88] exited with preempt_count 1 Fix this by flushing pending work in error path. Reviewed-by:
-
Peter Chen authored
- Delete the duplicated EP_CMD_ERDY and EP_CMD_REQ_CMPL setting - Prepare the next setup before setting EP_CMD_ERDY and EP_CMD_REQ_CMPL, it could avoid a bug that DMA hang at EP0 OUT for DEV_VER_NXP_V1 - Delete the duplicated cdns3_set_hw_configuration calling at cdns3_req_ep0_set_configuration, the composite.c will handle this request, and call .ep0_queue back, and at .ep_queue it will call cdns3_set_hw_configuration. - Move cdns3_allow_enable_l1 into cdns3_set_hw_configuration since it is part of this function. Signed-off-by:
-
Dan Robertson authored
The reset is a shared reset line, but reset_control_reset is still used and reset_control_deassert is not guaranteed to have been called before the first reset_control_assert call. When suspending the following warning may be seen: WARNING: CPU: 1 PID: 5530 at drivers/reset/core.c:355 reset_control_assert+0x184/0x19c Hardware name: Hardkernel ODROID-N2 (DT) [..] pc : reset_control_assert+0x184/0x19c lr : dwc3_meson_g12a_suspend+0x68/0x7c [..] Call trace: reset_control_assert+0x184/0x19c dwc3_meson_g12a_suspend+0x68/0x7c platform_pm_suspend+0x28/0x54 __device_suspend+0x590/0xabc dpm_suspend+0x104/0x404 dpm_suspend_start+0x84/0x1bc suspend_devices_and_enter+0xc4/0x4fc pm_suspend+0x198/0x2d4 Fixes: 6d9fa35a ("usb: dwc3: meson-g12a: get the reset as shared") Signed-off-by:
Dan Robertson <dan@dlrobertson.com> Signed-off-by:
-
- 23 Jul, 2020 2 commits
-
-
Amelie Delaunay authored
If usb-role-switch is present in the device tree, it means that ID and Vbus signals are not connected to the OTG controller but to an external component (GPIOs, Type-C controller). In this configuration, usb role switch is used to force valid sessions on STM32MP15 SoCs. Acked-by:
Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by:
-
Amelie Delaunay authored
This patch adds support for usb role switch to dwc2, by using overriding control of the PHY voltage valid and ID input signals. iddig signal (ID) can be overridden: - when setting GUSBCFG_FORCEHOSTMODE, iddig input pin is overridden with 1; - when setting GUSBCFG_FORCEDEVMODE, iddig input pin is overridden with 0. avalid/bvalid/vbusvalid signals can be overridden respectively with: - GOTGCTL_AVALOEN + GOTGCTL_AVALOVAL - GOTGCTL_BVALOEN + GOTGCTL_BVALOVAL - GOTGCTL_VBVALEN + GOTGCTL_VBVALOVAL It is possible to determine valid sessions thanks to usb role switch: - if USB_ROLE_NONE then !avalid && !bvalid && !vbusvalid - if USB_ROLE_DEVICE then !avalid && bvalid && vbusvalid - if USB_ROLE_HOST then avalid && !bvalid && vbusvalid Acked-by:
-
- 22 Jul, 2020 1 commit
-
-
Christoph Hellwig authored
Just switch the low-level routines to take kernel structures, and do the conversion from the compat to the native structure on that. Signed-off-by:
Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20200722073655.220011-1-hch@lst.deSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 21 Jul, 2020 14 commits
-
-
Greg Kroah-Hartman authored
Merge tag 'thunderbolt-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next Mika writes: thunderbolt: Changes for v5.9 merge window This includes following Thunderbolt/USB4 changes for v5.9 merge window: * Improvements around NHI (Native Host Interface) HopID allocation * Improvements to tunneling and USB3 bandwidth management support * Add KUnit tests for path walking and tunneling * Initial support for USB4 retimer firmware upgrade * Implement Thunderbolt device firmware upgrade mechanism that runs the NVM image authentication when the device is disconnected. * A couple of small non-critical fixes * tag 'thunderbolt-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: (32 commits) thunderbolt: Fix old style declaration warning thunderbolt: Add support for authenticate on disconnect thunderbolt: Add support for separating the flush to SPI and authenticate thunderbolt: Ensure left shift of 512 does not overflow a 32 bit int thunderbolt: Add support for on-board retimers thunderbolt: Implement USB4 port sideband operations for retimer access thunderbolt: Retry USB4 block read operation thunderbolt: Generalize usb4_switch_do_[read|write]_data() thunderbolt: Split common NVM functionality into a separate file thunderbolt: Add Intel USB-IF ID to the NVM upgrade supported list thunderbolt: Add KUnit tests for tunneling thunderbolt: Add USB3 bandwidth management thunderbolt: Make tb_port_get_link_speed() available to other files thunderbolt: Implement USB3 bandwidth negotiation routines thunderbolt: Increase DP DPRX wait timeout thunderbolt: Report consumed bandwidth in both directions thunderbolt: Make usb4_switch_map_pcie_down() also return enabled ports thunderbolt: Make usb4_switch_map_usb3_down() also return enabled ports thunderbolt: Do not tunnel USB3 if link is not USB4 thunderbolt: Add DP IN resources for all routers ...
-
Linus Walleij authored
The OMAP1 OHCI driver is using the legacy GPIO API to grab some random GPIO lines. One is from the TPS65010 chip and used for power, another one is for overcurrent and while the driver picks this line it doesn't watch it at all. Convert the driver and the OMAP1 OSK board file to pass these two GPIOs as machine described GPIO descriptors. I noticed the overcurrent GPIO line is not really used in the code so dropped in a little comment for other developers. Cc: Janusz Krzysztofik <jmkrzyszt@gmail.com> Cc: Tony Lindgren <tony@atomide.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20200720135524.100374-2-linus.walleij@linaro.orgSigned-off-by:
-
Linus Walleij authored
The OMAP1 was using static locals to hold the clock handles which is uncommon and does not scale. Create a private data struct and use that to hold the clocks. Cc: Janusz Krzysztofik <jmkrzyszt@gmail.com> Cc: Tony Lindgren <tony@atomide.com> Acked-by:
-
Xu Wang authored
usb_free_coherent() is safe with NULL addr and this check is not required. Signed-off-by:
Xu Wang <vulab@iscas.ac.cn> Link: https://lore.kernel.org/r/20200720052456.7610-1-vulab@iscas.ac.cnSigned-off-by:
-
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by:Alexander A. Klimov <grandmaster@al2klimov.de> Link: https://lore.kernel.org/r/20200719160910.60018-1-grandmaster@al2klimov.deSigned-off-by:
-
Bixuan Cui authored
Fix the warning: [-Werror=-Wframe-larger-than=] drivers/usb/misc/usbtest.c: In function 'test_queue': drivers/usb/misc/usbtest.c:2148:1: warning: the frame size of 1232 bytes is larger than 1024 bytes Reported-by:
kbuild test robot <lkp@intel.com> Acked-by:
Bixuan Cui <cuibixuan@huawei.com> Link: https://lore.kernel.org/r/ffa85702-86ab-48d7-4da2-2efcc94b05d3@huawei.comSigned-off-by:
-
Badhri Jagan Sridharan authored
Port starts to toggle when transitioning to unattached state. This is incorrect while in BIST mode. 6.4.3.1 BIST Carrier Mode Upon receipt of a BIST Message, with a BIST Carrier Mode BIST Data Object, the UUT Shall send out a continuous string of BMC encoded alternating "1"s and “0”s. The UUT Shall exit the Continuous BIST Mode within tBISTContMode of this Continuous BIST Mode being enabled(see Section 6.6.7.2). 6.4.3.2 BIST Test Data Upon receipt of a BIST Message, with a BIST Test Data BIST Data Object, the UUT Shall return a GoodCRC Message and Shall enter a test mode in which it sends no further Messages except for GoodCRC Messages in response to received Messages. See Section 5.9.2 for the definition of the Test Data Frame. The test Shall be ended by sending Hard Reset Signaling to reset the UUT. Signed-off-by:
Badhri Jagan Sridharan <badhri@google.com> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200716034128.1251728-3-badhri@google.comSigned-off-by:
-
Badhri Jagan Sridharan authored
Quoting from TCPCI spec: "Setting this bit to 1 is intended to be used only when a USB compliance tester is using USB BIST Test Data to test the PHY layer of the TCPC. The TCPM should clear this bit when a disconnect is detected. 0: Normal Operation. Incoming messages enabled by RECEIVE_DETECT passed to TCPM via Alert. 1: BIST Test Mode. Incoming messages enabled by RECEIVE_DETECT result in GoodCRC response but may not be passed to the TCPM via Alert." Signed-off-by:
-
Badhri Jagan Sridharan authored
TCPM supports BIST carried mode. PD compliance tests require BIST Test Data to be supported as well. Introducing set_bist_data callback to signal tcpc driver for configuring the port controller hardware to enable/disable BIST Test Data mode. Signed-off-by:
-
Kyle Tso authored
typec_partner_register_altmode returns ERR_PTR. Reset the pointer altmode to NULL on failure. Signed-off-by:
Kyle Tso <kyletso@google.com> Reviewed-by:
-
Kyle Tso authored
typec_register_altmode returns ERR_PTR on failure. Signed-off-by:
-
Prashant Malani authored
When pmc_usb_mux_set() is invoked when a device is disconnected, a valid scenario is for state->alt == NULL and state->mode == TYPEC_STATE_USB. In such cases, if a pmc_usb_disconnect() has already been issued (from either pmc_usb_set_orientation() when orientation == TYPEC_ORIENTATION_NONE, or pmc_usb_set_role() when role == USB_ROLE_NONE), a pmc_usb_connect() will be issued despite no peripheral being present. This confuses the PMC and leads to all subsequent PMC IPC requests returning errors due to timeout. To prevent this, return early if the port orientation or role is already set to none. Cc: Benson Leung <bleung@chromium.org> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Rajmohan Mani <rajmohan.mani@intel.com> Fixes: f3c1c41e ("usb: typec: intel_pmc_mux: Add support for USB4") Signed-off-by:
Prashant Malani <pmalani@chromium.org> Link: https://lore.kernel.org/r/20200709002441.1309189-1-pmalani@chromium.orgSigned-off-by:
-
Kars Mulder authored
The function quirks_param_set() takes as argument a const char* pointer to the new value of the usbcore.quirks parameter. It then casts this pointer to a non-const char* pointer and passes it to the strsep() function, which overwrites the value. Fix this by creating a copy of the value using kstrdup() and letting that copy be written to by strsep(). Fixes: 027bd6ca ("usb: core: Add "quirks" parameter for usbcore") Signed-off-by:
Kars Mulder <kerneldev@karsmulder.nl> Link: https://lore.kernel.org/r/5ee2-5f048a00-21-618c5c00@230659773Signed-off-by:
-
Andy Shevchenko authored
It appears that some platforms share same IRQ line between several devices, some of which are EHCI and OHCI controllers. This is neither practical nor performance-wise, especially in the case when they are supporting MSI. In order to improve the situation try to allocate MSI and fallback to legacy IRQ if no MSI available. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200702143045.23429-1-andriy.shevchenko@linux.intel.comSigned-off-by:
-
- 20 Jul, 2020 1 commit
-
-
Greg Kroah-Hartman authored
We need the USB fixes in here as well. Signed-off-by:
-
