Clean up: The function name should match the documenting comment.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

rpcrdma_rep objects are removed from their free list by only a
single thread: the Receive completion handler. Thus that free list
can be converted to an llist, where a single-threaded consumer and
a multi-threaded producer (rpcrdma_buffer_put) can both access the
llist without the need for any serialization.

This eliminates spin lock contention between the Receive completion
handler and rpcrdma_buffer_get, and makes the rep consumer wait-
free.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Clean up: Now that the free list is used sparingly, get rid of the
separate spin lock protecting it.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Instead of a globally-contended MR free list, cache MRs in each
rpcrdma_req as they are released. This means acquiring and releasing
an MR will be lock-free in the common case, even outside the
transport send lock.

The original idea of per-rpcrdma_req MR free lists was suggested by
Shirley Ma <shirley.ma@oracle.com> several years ago. I just now
figured out how to make that idea work with on-demand MR allocation.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Probably would be good to also pass GFP flags to ib_alloc_mr.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Refactor: Retrieve an MR and handle error recovery entirely in
rpc_rdma.c, as this is not a device-specific function.

Note that since commit 89f90fe1 ("SUNRPC: Allow calls to
xprt_transmit() to drain the entire transmit queue"), the
xprt_transmit function handles the cond_resched. The transport no
longer has to do this itself.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Clean up. There is only one remaining rpcrdma_mr_put call site, and
it can be directly replaced with unmap_and_put because mr->mr_dir is
set to DMA_NONE just before the call.

Now all the call sites do a DMA unmap, and we can just rename
mr_unmap_and_put to mr_put, which nicely matches mr_get.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Clean up: rpcrdma_mr_pop call sites check if the list is empty
first. Let's replace the list_empty with less costly logic.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Commit 48be539d ("xprtrdma: Introduce ->alloc_slot call-out for
xprtrdma") added a separate alloc_slot and free_slot to the RPC/RDMA
transport. Later, commit 75891f50 ("SUNRPC: Support for
congestion control when queuing is enabled") modified the generic
alloc/free_slot methods, but neglected the methods in xprtrdma.

Found via code review.

Fixes: 75891f50 ("SUNRPC: Support for congestion control ... ")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Clean up: There are other "all" list heads. For code clarity
distinguish this one as for use only for MRs by renaming it.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Make the field name the same for all trace points that handle
pointers to struct rpcrdma_rep. That makes it easy to grep for
matching rep points in trace output.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

I've heard rumors of an NFS/RDMA server implementation that has a
default credit limit of 1024. The client's default setting remains
at 128.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Although I haven't seen any performance results that justify it,
I've received several complaints that NFS/RDMA no longer supports
a maximum rsize and wsize of 1MB. These days it is somewhat smaller.

To simplify the logic that determines whether a chunk list is
necessary, the implementation uses a fixed maximum size of the
transport header. Currently that maximum size is 256 bytes, one
quarter of the default inline threshold size for RPC/RDMA v1.

Since commit a7886849 ("xprtrdma: Reduce max_frwr_depth"), the
size of chunks is also smaller to take advantage of inline page
lists in device internal MR data structures.

The combination of these two design choices has reduced the maximum
NFS rsize and wsize that can be used for most RNIC/HCAs. Increasing
the maximum transport header size and the maximum number of RDMA
segments it can contain increases the negotiated maximum rsize/wsize
on common RNIC/HCAs.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Commit 302d3deb ("xprtrdma: Prevent inline overflow") added this
calculation back in 2016, but got it wrong. I tested only the lower
bound, which is why there is a max_t there. The upper bound should be
rounded up too.

Now, when using DIV_ROUND_UP, that takes care of the lower bound as
well.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Comment was made obsolete by commit 8cec3dba ("xprtrdma:
rpcrdma_regbuf alignment").
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Things have changed since this comment was written. In particular,
the reworking of connection closing, on-demand creation of MRs, and
the removal of fr_state all mean that deferring MR recovery to
frwr_map is no longer needed. The description is obsolete.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Micro-optimization: For xdr_commit_encode call sites in
net/sunrpc/xdr.c, eliminate the extra calling sequence.  On my
client, this change saves about a microsecond for every 30 calls
to xdr_reserve_space().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Clean up: commit c544577d ("SUNRPC: Clean up transport write
space handling") appears to have removed the last caller of
rpc_wake_up_queued_task_on_wq().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

In encode_attrs(), there is an if statement on line 1145 to check
whether label is NULL:
    if (label && (attrmask[2] & FATTR4_WORD2_SECURITY_LABEL))

When label is NULL, it is used on lines 1178-1181:
    *p++ = cpu_to_be32(label->lfs);
    *p++ = cpu_to_be32(label->pi);
    *p++ = cpu_to_be32(label->len);
    p = xdr_encode_opaque_fixed(p, label->label, label->len);

To fix these bugs, label is checked before being used.

These bugs are found by a static analysis tool STCheck written by us.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Pull MTD fix from Richard Weinberger:
 "A single fix for MTD to correctly set the spi-nor WP pin"

* tag 'fixes-for-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: spi-nor: Fix the disabling of write protection at init

Pull btrfs fixes from David Sterba:
 "Two fixes that popped up during testing:

   - fix for sysfs-related code that adds/removes block groups, warnings
     appear during several fstests in connection with sysfs updates in
     5.3, the fix essentially replaces a workaround with scope NOFS and
     applies to 5.2-based branch too

   - add sanity check of trim range"

* tag 'for-5.3-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: trim: Check the range passed into to prevent overflow
  Btrfs: fix sysfs warning and missing raid sysfs directories

Pull x86 fixes from Thomas Gleixner:
 "A set of fixes for x86:

   - Fix the inconsistent error handling in the umwait init code

   - Rework the boot param zeroing so gcc9 stops complaining about out
     of bound memset. The resulting source code is actually more sane to
     read than the smart solution we had

   - Maintainers update so Tony gets involved when Intel models are
     added

   - Some more fallthrough fixes"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot: Save fields explicitly, zero out everything else
  MAINTAINERS, x86/CPU: Tony Luck will maintain asm/intel-family.h
  x86/fpu/math-emu: Address fallthrough warnings
  x86/apic/32: Fix yet another implicit fallthrough warning
  x86/umwait: Fix error handling in umwait_init()

Pull EFI fix from Thomas Gleixner:
 "A single fix for a EFI mixed mode regression caused by recent rework
  which did not take the firmware bitwidth into account"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi-stub: Fix get_efi_config_table on mixed-mode setups

Pull SPDX fixes from Greg KH:
 "Here are four small SPDX fixes for 5.3-rc5.

  A few style fixes for some SPDX comments, added an SPDX tag for one
  file, and fix up some GPL boilerplate for another file.

  All of these have been in linux-next for a few weeks with no reported
  issues (they are comment changes only, so that's to be expected...)"

* tag 'spdx-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
  i2c: stm32: Use the correct style for SPDX License Identifier
  intel_th: Use the correct style for SPDX License Identifier
  coccinelle: api/atomic_as_refcounter: add SPDX License Identifier
  kernel/configs: Replace GPL boilerplate code with SPDX identifier

Pull char/misc driver fixes from Greg KH:
 "Here are some small char and misc driver fixes for 5.3-rc5.

  These are two different subsystems needing some fixes, the habanalabs
  driver which is has some more big endian fixes for problems found. The
  other are some small soundwire fixes, including some Kconfig
  dependencies needed to resolve reported build errors.

  All of these have been in linux-next this week with no reported
  issues"

* tag 'char-misc-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  misc: xilinx-sdfec: fix dependency and build error
  habanalabs: fix device IRQ unmasking for BE host
  habanalabs: fix endianness handling for internal QMAN submission
  habanalabs: fix completion queue handling when host is BE
  habanalabs: fix endianness handling for packets from user
  habanalabs: fix DRAM usage accounting on context tear down
  habanalabs: Avoid double free in error flow
  soundwire: fix regmap dependencies and align with other serial links
  soundwire: cadence_master: fix definitions for INTSTAT0/1
  soundwire: cadence_master: fix register definition for SLAVE_STATE

Pull staging/IIO fixes from Greg KH:
 "Here are four small staging and iio driver fixes for 5.3-rc5

  Two are for the dt3000 comedi driver for some reported problems found
  in that codebase, and two are some small iio fixes.

  All of these have been in linux-next this week with no reported
  issues"

* tag 'staging-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: comedi: dt3000: Fix rounding up of timer divisor
  staging: comedi: dt3000: Fix signed integer overflow 'divider * base'
  iio: adc: max9611: Fix temperature reading in probe
  iio: frequency: adf4371: Fix output frequency setting

Pull USB fixes from Greg KH:
 "Here are number of small USB fixes for 5.3-rc5.

  Syzbot has been on a tear recently now that it has some good USB
  debugging hooks integrated, so there's a number of fixes in here found
  by those tools for some _very_ old bugs. Also a handful of gadget
  driver fixes for reported issues, some hopefully-final dma fixes for
  host controller drivers, and some new USB serial gadget driver ids.

  All of these have been in linux-next this week with no reported issues
  (the usb-serial ones were in linux-next in its own branch, but merged
  into mine on Friday)"

* tag 'usb-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: add a hcd_uses_dma helper
  usb: don't create dma pools for HCDs with a localmem_pool
  usb: chipidea: imx: fix EPROBE_DEFER support during driver probe
  usb: host: fotg2: restart hcd after port reset
  USB: CDC: fix sanity checks in CDC union parser
  usb: cdc-acm: make sure a refcount is taken early enough
  USB: serial: option: add the BroadMobi BM818 card
  USB: serial: option: Add Motorola modem UARTs
  USB: core: Fix races in character device registration and deregistraion
  usb: gadget: mass_storage: Fix races between fsg_disable and fsg_set_alt
  usb: gadget: composite: Clear "suspended" on reset/disconnect
  usb: gadget: udc: renesas_usb3: Fix sysfs interface of "role"
  USB: serial: option: add D-Link DWM-222 device ID
  USB: serial: option: Add support for ZTE MF871A

Pull block fixes from Jens Axboe:
 "A collection of fixes that should go into this series. This contains:

   - Revert of the REQ_NOWAIT_INLINE and associated dio changes. There
     were still corner cases there, and even though I had a solution for
     it, it's too involved for this stage. (me)

   - Set of NVMe fixes (via Sagi)

   - io_uring fix for fixed buffers (Anthony)

   - io_uring defer issue fix (Jackie)

   - Regression fix for queue sync at exit time (zhengbin)

   - xen blk-back memory leak fix (Wenwen)"

* tag 'for-linus-2019-08-17' of git://git.kernel.dk/linux-block:
  io_uring: fix an issue when IOSQE_IO_LINK is inserted into defer list
  block: remove REQ_NOWAIT_INLINE
  io_uring: fix manual setup of iov_iter for fixed buffers
  xen/blkback: fix memory leaks
  blk-mq: move cancel of requeue_work to the front of blk_exit_queue
  nvme-pci: Fix async probe remove race
  nvme: fix controller removal race with scan work
  nvme-rdma: fix possible use-after-free in connect error flow
  nvme: fix a possible deadlock when passthru commands sent to a multipath device
  nvme-core: Fix extra device_put() call on error path
  nvmet-file: fix nvmet_file_flush() always returning an error
  nvmet-loop: Flush nvme_delete_wq when removing the port
  nvmet: Fix use-after-free bug when a port is removed
  nvme-multipath: revalidate nvme_ns_head gendisk in nvme_validate_ns

Pull Hyper-V fixes from Sasha Levin:

 - A few fixes for the userspace hyper-v tools from Adrian Vladu.

 - A fix for the hyper-v MAINTAINERs entry from Lan Tianyu.

 - Fix for SPDX license identifier in the userspace tools from Nishad
   Kamdar.

* tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  MAINTAINERS: Fix Hyperv vIOMMU driver file name
  tools: hv: Use the correct style for SPDX License Identifier
  tools: hv: fix typos in toolchain
  tools: hv: fix KVP and VSS daemons exit code
  tools: hv: fixed Python pep8/flake8 warnings for lsvmbus

The Hyperv vIOMMU file name should be "hyperv-iommu.c" rather
than "hyperv_iommu.c". This patch is to fix it.
Signed-off-by: Lan Tianyu <Tianyu.Lan@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

This patch corrects the SPDX License Identifier style
in the trace header file related to Microsoft Hyper-V
client drivers.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used)

Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Fix typos in the HyperV toolchain.
Signed-off-by: Adrian Vladu <avladu@cloudbasesolutions.com>

Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Alessandro Pilotti <apilotti@cloudbasesolutions.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HyperV KVP and VSS daemons should exit with 0 when the '--help'
or '-h' flags are used.
Signed-off-by: Adrian Vladu <avladu@cloudbasesolutions.com>

Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Alessandro Pilotti <apilotti@cloudbasesolutions.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Fixed pep8/flake8 python style code for lsvmbus tool.

The TAB indentation was on purpose ignored (pep8 rule W191) to make
sure the code is complying with the Linux code guideline.
The following command doe not show any warnings now:
pep8 --ignore=W191 lsvmbus
flake8 --ignore=W191 lsvmbus
Signed-off-by: Adrian Vladu <avladu@cloudbasesolutions.com>

Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Alessandro Pilotti <apilotti@cloudbasesolutions.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Pull i2c fixes from Wolfram Sang:
 "I2C has one revert because of a regression, two fixes for tiny race
  windows (which we were not able to trigger), a MAINTAINERS addition,
  and a SPDX fix"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: stm32: Use the correct style for SPDX License Identifier
  i2c: emev2: avoid race when unregistering slave client
  i2c: rcar: avoid race when unregistering slave client
  MAINTAINERS: i2c-imx: take over maintainership
  Revert "i2c: imx: improve the error handling in i2c_imx_dma_request()"

Pull RISC-V fixes from Paul Walmsley:

 - Two patches to fix significant bugs in floating point register
   context handling

 - A minor fix in RISC-V flush_tlb_page(), to supply a valid end address
   to flush_tlb_range()

 - Two minor defconfig additions: to build the virtio hwrng driver by
   default (for QEMU targets), and to partially synchronize the 32-bit
   defconfig with the 64-bit defconfig

* tag 'riscv/for-v5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Make __fstate_clean() work correctly.
  riscv: Correct the initialized flow of FP register
  riscv: defconfig: Update the defconfig
  riscv: rv32_defconfig: Update the defconfig
  riscv: fix flush_tlb_range() end address for flush_tlb_page()

Merge tag 'usb-serial-5.3-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus

Johan writes:

USB-serial fixes for 5.3-rc5

Here are some new modem device ids.

All have been in linux-next with no reported issues.
Signed-off-by: Johan Hovold <johan@kernel.org>

* tag 'usb-serial-5.3-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
  USB: serial: option: add the BroadMobi BM818 card
  USB: serial: option: Add Motorola modem UARTs
  USB: serial: option: add D-Link DWM-222 device ID
  USB: serial: option: Add support for ZTE MF871A

Pull Xtensa fix from Max Filippov:
 "Add missing isync into cpu_reset to make sure ITLB changes are
  effective"

* tag 'xtensa-20190816' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: add missing isync to the cpu_reset TLB code

Pull arm64 fixes from Catalin Marinas:

 - Don't taint the kernel if CPUs have different sets of page sizes
   supported (other than the one in use).

 - Issue I-cache maintenance for module ftrace trampoline.

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: ftrace: Ensure module ftrace trampoline is coherent with I-side
  arm64: cpufeature: Don't treat granule sizes as strict