[13654.480669] ======================================================
[13654.480905] [ INFO: possible circular locking dependency detected ]
[13654.481003] 3.12.0+ #4 Tainted: G        W  O
[13654.481060] -------------------------------------------------------
[13654.481060] btrfs-transacti/9347 is trying to acquire lock:
[13654.481060]  (&(&root->ordered_extent_lock)->rlock){+.+...}, at: [<ffffffffa02d30a1>] btrfs_cleanup_transaction+0x271/0x570 [btrfs]
[13654.481060] but task is already holding lock:
[13654.481060]  (&(&fs_info->ordered_root_lock)->rlock){+.+...}, at: [<ffffffffa02d3015>] btrfs_cleanup_transaction+0x1e5/0x570 [btrfs]
[13654.481060] which lock already depends on the new lock.

[13654.481060] the existing dependency chain (in reverse order) is:
[13654.481060] -> #1 (&(&fs_info->ordered_root_lock)->rlock){+.+...}:
[13654.481060]        [<ffffffff810c4103>] lock_acquire+0x93/0x130
[13654.481060]        [<ffffffff81689991>] _raw_spin_lock+0x41/0x50
[13654.481060]        [<ffffffffa02f011b>] __btrfs_add_ordered_extent+0x39b/0x450 [btrfs]
[13654.481060]        [<ffffffffa02f0202>] btrfs_add_ordered_extent+0x32/0x40 [btrfs]
[13654.481060]        [<ffffffffa02df6aa>] run_delalloc_nocow+0x78a/0x9d0 [btrfs]
[13654.481060]        [<ffffffffa02dfc0d>] run_delalloc_range+0x31d/0x390 [btrfs]
[13654.481060]        [<ffffffffa02f7c00>] __extent_writepage+0x310/0x780 [btrfs]
[13654.481060]        [<ffffffffa02f830a>] extent_write_cache_pages.isra.29.constprop.48+0x29a/0x410 [btrfs]
[13654.481060]        [<ffffffffa02f879d>] extent_writepages+0x4d/0x70 [btrfs]
[13654.481060]        [<ffffffffa02d9f68>] btrfs_writepages+0x28/0x30 [btrfs]
[13654.481060]        [<ffffffff8114be91>] do_writepages+0x21/0x50
[13654.481060]        [<ffffffff81140d49>] __filemap_fdatawrite_range+0x59/0x60
[13654.481060]        [<ffffffff81140e13>] filemap_fdatawrite_range+0x13/0x20
[13654.481060]        [<ffffffffa02f1db9>] btrfs_wait_ordered_range+0x49/0x140 [btrfs]
[13654.481060]        [<ffffffffa0318fe2>] __btrfs_write_out_cache+0x682/0x8b0 [btrfs]
[13654.481060]        [<ffffffffa031952d>] btrfs_write_out_cache+0x8d/0xe0 [btrfs]
[13654.481060]        [<ffffffffa02c7083>] btrfs_write_dirty_block_groups+0x593/0x680 [btrfs]
[13654.481060]        [<ffffffffa0345307>] commit_cowonly_roots+0x14b/0x20d [btrfs]
[13654.481060]        [<ffffffffa02d7c1a>] btrfs_commit_transaction+0x43a/0x9d0 [btrfs]
[13654.481060]        [<ffffffffa030061a>] btrfs_create_uuid_tree+0x5a/0x100 [btrfs]
[13654.481060]        [<ffffffffa02d5a8a>] open_ctree+0x21da/0x2210 [btrfs]
[13654.481060]        [<ffffffffa02ab6fe>] btrfs_mount+0x68e/0x870 [btrfs]
[13654.481060]        [<ffffffff811b2409>] mount_fs+0x39/0x1b0
[13654.481060]        [<ffffffff811cd653>] vfs_kern_mount+0x63/0xf0
[13654.481060]        [<ffffffff811cfcce>] do_mount+0x23e/0xa90
[13654.481060]        [<ffffffff811d05a3>] SyS_mount+0x83/0xc0
[13654.481060]        [<ffffffff81692b52>] system_call_fastpath+0x16/0x1b
[13654.481060] -> #0 (&(&root->ordered_extent_lock)->rlock){+.+...}:
[13654.481060]        [<ffffffff810c340a>] __lock_acquire+0x150a/0x1a70
[13654.481060]        [<ffffffff810c4103>] lock_acquire+0x93/0x130
[13654.481060]        [<ffffffff81689991>] _raw_spin_lock+0x41/0x50
[13654.481060]        [<ffffffffa02d30a1>] btrfs_cleanup_transaction+0x271/0x570 [btrfs]
[13654.481060]        [<ffffffffa02d35ce>] transaction_kthread+0x22e/0x270 [btrfs]
[13654.481060]        [<ffffffff81079efa>] kthread+0xea/0xf0
[13654.481060]        [<ffffffff81692aac>] ret_from_fork+0x7c/0xb0
[13654.481060] other info that might help us debug this:

[13654.481060]  Possible unsafe locking scenario:

[13654.481060]        CPU0                    CPU1
[13654.481060]        ----                    ----
[13654.481060]   lock(&(&fs_info->ordered_root_lock)->rlock);
[13654.481060]				 lock(&(&root->ordered_extent_lock)->rlock);
[13654.481060]				 lock(&(&fs_info->ordered_root_lock)->rlock);
[13654.481060]   lock(&(&root->ordered_extent_lock)->rlock);
[13654.481060]
 *** DEADLOCK ***
[...]

======================================================

btrfs_destroy_all_ordered_extents()
gets &fs_info->ordered_root_lock __BEFORE__ acquiring &root->ordered_extent_lock,
while btrfs_[add,remove]_ordered_extent()
acquires &fs_info->ordered_root_lock __AFTER__ getting &root->ordered_extent_lock.

This patch fixes the above problem.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>

This is an extension to my previous commit titled:

  "Btrfs: faster file extent item replace operations"
  (hash 1acae57b)

Instead of inserting the new file extent item if we deleted existing
file extent items covering our target file range, also allow to insert
the new file extent item if we didn't find any existing items to delete
and replace_extent != 0, since in this case our caller would do another
tree search to insert the new file extent item anyway, therefore just
combine the two tree searches into a single one, saving cpu time, reducing
lock contention and reducing btree node/leaf COW operations.

This covers the case where applications keep doing tail append writes to
files, which for example is the case of Apache CouchDB (its database and
view index files are always open with O_APPEND).
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>

In case we do not refill, we can overwrite cur pointer from prio_head
by one from not prioritized head, what looks as something that was
not intended.

This change make we always take works from prio_head first until it's
not empty.
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Josef Bacik <jbacik@fb.com>

This reverts commit 41ce9970.
Previously i was thinking we can use readonly root's commit root
safely while it is not true, readonly root may be cowed with the
following cases.

1.snapshot send root will cow source root.
2.balance,device operations will also cow readonly send root
to relocate.

So i have two ideas to make us safe to use commit root.

-->approach 1:
make it protected by transaction and end transaction properly and we research
next item from root node(see btrfs_search_slot_for_read()).

-->approach 2:
add another counter to local root structure to sync snapshot with send.
and add a global counter to sync send with exclusive device operations.

So with approach 2, send can use commit root safely, because we make sure
send root can not be cowed during send. Unfortunately, it make codes *ugly*
and more complex to maintain.

To make snapshot and send exclusively, device operations and send operation
exclusively with each other is a little confusing for common users.

So why not drop into previous way.

Cc: Josef Bacik <jbacik@fb.com>
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>

Btrfs send is assuming readonly root won't change, let's skip readonly root.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>

Since we have introduced btrfs_previous_extent_item() to search previous
extent item, just switch into it.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Reviewed-by: Filipe Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>

I got an error on v3.13:
 BTRFS error (device sdf1) in write_all_supers:3378: errno=-5 IO failure (errors while submitting device barriers.)

how to reproduce:
  > mkfs.btrfs -f -d raid1 /dev/sdf1 /dev/sdf2
  > wipefs -a /dev/sdf2
  > mount -o degraded /dev/sdf1 /mnt
  > btrfs balance start -f -sconvert=single -mconvert=single -dconvert=single /mnt

The reason of the error is that barrier_all_devices() failed to submit
barrier to the missing device.  However it is clear that we cannot do
anything on missing device, and also it is not necessary to care chunks
on the missing device.

This patch stops sending/waiting barrier if device is missing.
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Josef Bacik <jbacik@fb.com>

When I converted the BUG_ON() for the free_space_cache_inode in cow_file_range I
made it so we just return an error instead of unlocking all of our various
stuff.  This is a mistake and causes us to hang when we run into this.  This
patch fixes this problem.  Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>

While trying to reproduce a delayed ref problem I noticed the box kept falling
over using all 80gb of my ram with btrfs_inode's and btrfs_delayed_node's.
Turns out this is because we only throttle delayed inode updates in
btrfs_dirty_inode, which doesn't actually get called that often, especially when
all you are doing is creating a bunch of files.  So balance delayed inode
updates everytime we create a new inode.  With this patch we no longer use up
all of our ram with delayed inode updates.  Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>

Help during debugging to export various interesting infromation and
tunables without the need of extra mount options or ioctls.

Usage:
* declare your variable in sysfs.h, and include where you need it
* define the variable in sysfs.c and make it visible via
  debugfs_create_TYPE

Depends on CONFIG_DEBUG_FS.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fb.com>

The fs_path structure uses an inline buffer and falls back to a chain of
allocations, but vmalloc is not necessary because PATH_MAX fits into
PAGE_SIZE.

The size of fs_path has been reduced to 256 bytes from PAGE_SIZE,
usually 4k. Experimental measurements show that most paths on a single
filesystem do not exceed 200 bytes, and these get stored into the inline
buffer directly, which is now 230 bytes. Longer paths are kmalloced when
needed.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fb.com>

We have this pattern where we do search for a contiguous group of
items in a tree and everytime we find an item, we process it, then
we release our path, increment the offset of the search key, do
another full tree search and repeat these steps until a tree search
can't find more items we're interested in.

Instead of doing these full tree searches after processing each item,
just process the next item/slot in our leaf and don't release the path.
Since all these trees are read only and we always use the commit root
for a search and skip node/leaf locks, we're not affecting concurrency
on the trees.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>

This was a leftover from the commit:

   74dd17fb
   (Btrfs: fix btrfs send for inline items and compression)
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>

If cleaning the name cache fails, we could try to proceed at the cost of
some memory leak. This is not expected to happen often.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fb.com>

There are only 2 static callers, the BUG would normally be never
reached, but let's be nice.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fb.com>

We know that buf_len is at most PATH_MAX, 4k, and can merge it with the
reversed member. This saves 3 bytes in favor of inline_buf.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fb.com>

We don't need to keep track of that, it's available via is_vmalloc_addr.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fb.com>

The member is used only to return value back from
fs_path_prepare_for_add, we can do it locally and save 8 bytes for the
inline_buf path.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fb.com>

The buffer passed to snprintf can hold the fully expanded format string,
64 = 3x largest ULL + 3x char + trailing null.  I don't think that removing the
check entirely is a good idea, hence the ASSERT.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fb.com>

The commit titled "Btrfs: fix infinite path build loops in incremental send"
didn't cover a particular case where the parent-child relationship inversion
of directories doesn't imply a rename of the new parent directory. This was
due to a simple logic mistake, a logical and instead of a logical or.

Steps to reproduce:

  $ mkfs.btrfs -f /dev/sdb3
  $ mount /dev/sdb3 /mnt/btrfs
  $ mkdir -p /mnt/btrfs/a/b/bar1/bar2/bar3/bar4
  $ btrfs subvol snapshot -r /mnt/btrfs /mnt/btrfs/snap1
  $ mv /mnt/btrfs/a/b/bar1/bar2/bar3/bar4 /mnt/btrfs/a/b/k44
  $ mv /mnt/btrfs/a/b/bar1/bar2/bar3 /mnt/btrfs/a/b/k44
  $ mv /mnt/btrfs/a/b/bar1/bar2 /mnt/btrfs/a/b/k44/bar3
  $ mv /mnt/btrfs/a/b/bar1 /mnt/btrfs/a/b/k44/bar3/bar2/k11
  $ btrfs subvol snapshot -r /mnt/btrfs /mnt/btrfs/snap2
  $ btrfs send -p /mnt/btrfs/snap1 /mnt/btrfs/snap2 > /tmp/incremental.send

A patch to update the test btrfs/030 from xfstests, so that it covers
this case, will be submitted soon.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>

This fixes a case that the commit titled:

   Btrfs: fix infinite path build loops in incremental send

didn't cover. If the parent-child relationship between 2 directories
is inverted, both get renamed, and the former parent has a file that
got renamed too (but remains a child of that directory), the incremental
send operation would use the file's old path after sending an unlink
operation for that old path, causing receive to fail on future operations
like changing owner, permissions or utimes of the corresponding inode.

This is not a regression from the commit mentioned before, as without
that commit we would fall into the issues that commit fixed, so it's
just one case that wasn't covered before.

Simple steps to reproduce this issue are:

      $ mkfs.btrfs -f /dev/sdb3
      $ mount /dev/sdb3 /mnt/btrfs
      $ mkdir -p /mnt/btrfs/a/b/c/d
      $ touch /mnt/btrfs/a/b/c/d/file
      $ mkdir -p /mnt/btrfs/a/b/x
      $ btrfs subvol snapshot -r /mnt/btrfs /mnt/btrfs/snap1
      $ mv /mnt/btrfs/a/b/x /mnt/btrfs/a/b/c/x2
      $ mv /mnt/btrfs/a/b/c/d /mnt/btrfs/a/b/c/x2/d2
      $ mv /mnt/btrfs/a/b/c/x2/d2/file /mnt/btrfs/a/b/c/x2/d2/file2
      $ btrfs subvol snapshot -r /mnt/btrfs /mnt/btrfs/snap2
      $ btrfs send -p /mnt/btrfs/snap1 /mnt/btrfs/snap2 > /tmp/incremental.send

A patch to update the test btrfs/030 from xfstests, so that it covers
this case, will be submitted soon.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>

find_all_leafs() dosen't need add all roots actually, add roots only
if we need, this can avoid unnecessary ulist dance.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>

The structure for BTRFS_SET_RECEIVED_IOCTL packs differently on 32-bit
and 64-bit systems. This means that it is impossible to use btrfs
receive on a system with a 64-bit kernel and 32-bit userspace, because
the structure size (and hence the ioctl number) is different.

This patch adds a compatibility structure and ioctl to deal with the
above case.
Signed-off-by: Hugo Mills <hugo@carfax.org.uk>
Signed-off-by: Josef Bacik <jbacik@fb.com>

Function wait_for_parent_move() returns negative value if an error
happened, 0 if we don't need to wait for the parent's move, and
1 if the wait is needed.
Before this change an error return value was being treated like the
return value 1, which was not correct.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>

During device replace test, we hit a null pointer deference (It was very easy
to reproduce it by running xfstests' btrfs/011 on the devices with the virtio
scsi driver). There were two bugs that caused this problem:
- We might allocate new chunks on the replaced device after we updated
  the mapping tree. And we forgot to replace the source device in those
  mapping of the new chunks.
- We might get the mapping information which including the source device
  before the mapping information update. And then submit the bio which was
  based on that mapping information after we freed the source device.

For the first bug, we can fix it by doing mapping tree update and source
device remove in the same context of the chunk mutex. The chunk mutex is
used to protect the allocable device list, the above method can avoid
the new chunk allocation, and after we remove the source device, all
the new chunks will be allocated on the new device. So it can fix
the first bug.

For the second bug, we need make sure all flighting bios are finished and
no new bios are produced during we are removing the source device. To fix
this problem, we introduced a global @bio_counter, we not only inc/dec
@bio_counter outsize of map_blocks, but also inc it before submitting bio
and dec @bio_counter when ending bios.

Since Raid56 is a little different and device replace dosen't support raid56
yet, it is not addressed in the patch and I add comments to make sure we will
fix it in the future.
Reported-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>

the alloc list of the filesystem is protected by ->chunk_mutex, we need
get that mutex when we insert the new device into the list.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>

EXDEV seems an appropriate error if an operation fails bacause it
crosses file system boundaries.
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Kusanagi Kouichi <slash@ac.auone-net.jp>
Signed-off-by: Josef Bacik <jbacik@fb.com>

There was a problem in the old code:
If we failed to log the csum, we would free all the ordered extents in the log list
including those ordered extents that were logged successfully, it would make the
log committer not to wait for the completion of the ordered extents.

This patch doesn't insert the ordered extents that is about to be logged into
a global list, instead, we insert them into a local list. If we log the ordered
extents successfully, we splice them with the global list, or we will throw them
away, then do full sync. It can also reduce the lock contention and the traverse
time of list.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>

For non compressed extents, iterate_extent_inodes() gives us offsets
that take into account the data offset from the file extent items, while
for compressed extents it doesn't. Therefore we have to adjust them before
placing them in a send clone instruction. Not doing this adjustment leads to
the receiving end requesting for a wrong a file range to the clone ioctl,
which results in different file content from the one in the original send
root.

Issue reproducible with the following excerpt from the test I made for
xfstests:

  _scratch_mkfs
  _scratch_mount "-o compress-force=lzo"

  $XFS_IO_PROG -f -c "truncate 118811" $SCRATCH_MNT/foo
  $XFS_IO_PROG -c "pwrite -S 0x0d -b 39987 92267 39987" $SCRATCH_MNT/foo

  $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/mysnap1

  $XFS_IO_PROG -c "pwrite -S 0x3e -b 80000 200000 80000" $SCRATCH_MNT/foo
  $BTRFS_UTIL_PROG filesystem sync $SCRATCH_MNT
  $XFS_IO_PROG -c "pwrite -S 0xdc -b 10000 250000 10000" $SCRATCH_MNT/foo
  $XFS_IO_PROG -c "pwrite -S 0xff -b 10000 300000 10000" $SCRATCH_MNT/foo

  # will be used for incremental send to be able to issue clone operations
  $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/clones_snap

  $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/mysnap2

  $FSSUM_PROG -A -f -w $tmp/1.fssum $SCRATCH_MNT/mysnap1
  $FSSUM_PROG -A -f -w $tmp/2.fssum -x $SCRATCH_MNT/mysnap2/mysnap1 \
      -x $SCRATCH_MNT/mysnap2/clones_snap $SCRATCH_MNT/mysnap2
  $FSSUM_PROG -A -f -w $tmp/clones.fssum $SCRATCH_MNT/clones_snap \
      -x $SCRATCH_MNT/clones_snap/mysnap1 -x $SCRATCH_MNT/clones_snap/mysnap2

  $BTRFS_UTIL_PROG send $SCRATCH_MNT/mysnap1 -f $tmp/1.snap
  $BTRFS_UTIL_PROG send $SCRATCH_MNT/clones_snap -f $tmp/clones.snap
  $BTRFS_UTIL_PROG send -p $SCRATCH_MNT/mysnap1 \
      -c $SCRATCH_MNT/clones_snap $SCRATCH_MNT/mysnap2 -f $tmp/2.snap

  _scratch_unmount
  _scratch_mkfs
  _scratch_mount

  $BTRFS_UTIL_PROG receive $SCRATCH_MNT -f $tmp/1.snap
  $FSSUM_PROG -r $tmp/1.fssum $SCRATCH_MNT/mysnap1 2>> $seqres.full

  $BTRFS_UTIL_PROG receive $SCRATCH_MNT -f $tmp/clones.snap
  $FSSUM_PROG -r $tmp/clones.fssum $SCRATCH_MNT/clones_snap 2>> $seqres.full

  $BTRFS_UTIL_PROG receive $SCRATCH_MNT -f $tmp/2.snap
  $FSSUM_PROG -r $tmp/2.fssum $SCRATCH_MNT/mysnap2 2>> $seqres.full
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Chris Mason <clm@fb.com>

bdev is null when disk has disappeared and mounted with
the degrade option

stack trace
---------
btrfs_sysfs_add_one+0x105/0x1c0 [btrfs]
open_ctree+0x15f3/0x1fe0 [btrfs]
btrfs_mount+0x5db/0x790 [btrfs]
? alloc_pages_current+0xa4/0x160
mount_fs+0x34/0x1b0
vfs_kern_mount+0x62/0xf0
do_mount+0x22e/0xa80
? __get_free_pages+0x9/0x40
? copy_mount_options+0x31/0x170
SyS_mount+0x7e/0xc0
system_call_fastpath+0x16/0x1b
---------

reproducer:
-------
mkfs.btrfs -draid1 -mraid1 /dev/sdc /dev/sdd
(detach a disk)
devmgt detach /dev/sdc [1]
mount -o degrade /dev/sdd /btrfs
-------

[1] github.com/anajain/devmgt.git
Signed-off-by: Anand Jain <Anand.Jain@oracle.com>
Tested-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>

A user was running into errors from an NFS export of a subvolume that had a
default subvol set.  When we mount a default subvol we will use d_obtain_alias()
to find an existing dentry for the subvolume in the case that the root subvol
has already been mounted, or a dummy one is allocated in the case that the root
subvol has not already been mounted.  This allows us to connect the dentry later
on if we wander into the path.  However if we don't ever wander into the path we
will keep DCACHE_DISCONNECTED set for a long time, which angers NFS.  It doesn't
appear to cause any problems but it is annoying nonetheless, so simply unset
DCACHE_DISCONNECTED in the get_default_root case and switch btrfs_lookup() to
use d_materialise_unique() instead which will make everything play nicely
together and reconnect stuff if we wander into the defaul subvol path from a
different way.  With this patch I'm no longer getting the NFS errors when
exporting a volume that has been mounted with a default subvol set.  Thanks,

cc: bfields@fieldses.org
cc: ebiederm@xmission.com
Signed-off-by: Josef Bacik <jbacik@fb.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Chris Mason <clm@fb.com>

Currently, the only mount option for max_inline that has any effect is
max_inline=0.  Any other value that is supplied to max_inline will be
adjusted to a minimum of 4k.  Since max_inline has an effective maximum
of ~3900 bytes due to page size limitations, the current behaviour
only has meaning for max_inline=0.

This patch will allow the the max_inline mount option to accept non-zero
values as indicated in the documentation.
Signed-off-by: Mitch Harder <mitch.harder@sabayonlinux.org>
Signed-off-by: Chris Mason <clm@fb.com>

Given now we have 2 spinlock for management of delayed refs,
CONFIG_DEBUG_SPINLOCK=y helped me find this,

[ 4723.413809] BUG: spinlock wrong CPU on CPU#1, btrfs-transacti/2258
[ 4723.414882]  lock: 0xffff880048377670, .magic: dead4ead, .owner: btrfs-transacti/2258, .owner_cpu: 2
[ 4723.417146] CPU: 1 PID: 2258 Comm: btrfs-transacti Tainted: G        W  O 3.12.0+ #4
[ 4723.421321] Call Trace:
[ 4723.421872]  [<ffffffff81680fe7>] dump_stack+0x54/0x74
[ 4723.422753]  [<ffffffff81681093>] spin_dump+0x8c/0x91
[ 4723.424979]  [<ffffffff816810b9>] spin_bug+0x21/0x26
[ 4723.425846]  [<ffffffff81323956>] do_raw_spin_unlock+0x66/0x90
[ 4723.434424]  [<ffffffff81689bf7>] _raw_spin_unlock+0x27/0x40
[ 4723.438747]  [<ffffffffa015da9e>] btrfs_cleanup_one_transaction+0x35e/0x710 [btrfs]
[ 4723.443321]  [<ffffffffa015df54>] btrfs_cleanup_transaction+0x104/0x570 [btrfs]
[ 4723.444692]  [<ffffffff810c1b5d>] ? trace_hardirqs_on_caller+0xfd/0x1c0
[ 4723.450336]  [<ffffffff810c1c2d>] ? trace_hardirqs_on+0xd/0x10
[ 4723.451332]  [<ffffffffa015e5ee>] transaction_kthread+0x22e/0x270 [btrfs]
[ 4723.452543]  [<ffffffffa015e3c0>] ? btrfs_cleanup_transaction+0x570/0x570 [btrfs]
[ 4723.457833]  [<ffffffff81079efa>] kthread+0xea/0xf0
[ 4723.458990]  [<ffffffff81079e10>] ? kthread_create_on_node+0x140/0x140
[ 4723.460133]  [<ffffffff81692aac>] ret_from_fork+0x7c/0xb0
[ 4723.460865]  [<ffffffff81079e10>] ? kthread_create_on_node+0x140/0x140
[ 4723.496521] ------------[ cut here ]------------

----------------------------------------------------------------------

The reason is that we get to call cond_resched_lock(&head_ref->lock) while
still holding @delayed_refs->lock.

So it's different with __btrfs_run_delayed_refs(), where we do drop-acquire
dance before and after actually processing delayed refs.

Here we don't drop the lock, others are not able to add new delayed refs to
head_ref, so cond_resched_lock(&head_ref->lock) is not necessary here.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>

This reverts commit 01e219e8.

David Sterba found a different way to provide these features without adding a new
ioctl.  We haven't released any progs with this ioctl yet, so I'm taking this out
for now until we finalize things.
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
CC: Jeff Mahoney <jeffm@suse.com>

When using a mix of compressed file extents and prealloc extents, it
is possible to fill a page of a file with random, garbage data from
some unrelated previous use of the page, instead of a sequence of zeroes.

A simple sequence of steps to get into such case, taken from the test
case I made for xfstests, is:

   _scratch_mkfs
   _scratch_mount "-o compress-force=lzo"
   $XFS_IO_PROG -f -c "pwrite -S 0x06 -b 18670 266978 18670" $SCRATCH_MNT/foobar
   $XFS_IO_PROG -c "falloc 26450 665194" $SCRATCH_MNT/foobar
   $XFS_IO_PROG -c "truncate 542872" $SCRATCH_MNT/foobar
   $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foobar

This results in the following file items in the fs tree:

   item 4 key (257 INODE_ITEM 0) itemoff 15879 itemsize 160
       inode generation 6 transid 6 size 542872 block group 0 mode 100600
   item 5 key (257 INODE_REF 256) itemoff 15863 itemsize 16
       inode ref index 2 namelen 6 name: foobar
   item 6 key (257 EXTENT_DATA 0) itemoff 15810 itemsize 53
       extent data disk byte 0 nr 0 gen 6
       extent data offset 0 nr 24576 ram 266240
       extent compression 0
   item 7 key (257 EXTENT_DATA 24576) itemoff 15757 itemsize 53
       prealloc data disk byte 12849152 nr 241664 gen 6
       prealloc data offset 0 nr 241664
   item 8 key (257 EXTENT_DATA 266240) itemoff 15704 itemsize 53
       extent data disk byte 12845056 nr 4096 gen 6
       extent data offset 0 nr 20480 ram 20480
       extent compression 2
   item 9 key (257 EXTENT_DATA 286720) itemoff 15651 itemsize 53
       prealloc data disk byte 13090816 nr 405504 gen 6
       prealloc data offset 0 nr 258048

The on disk extent at offset 266240 (which corresponds to 1 single disk block),
contains 5 compressed chunks of file data. Each of the first 4 compress 4096
bytes of file data, while the last one only compresses 3024 bytes of file data.
Therefore a read into the file region [285648 ; 286720[ (length = 4096 - 3024 =
1072 bytes) should always return zeroes (our next extent is a prealloc one).

The solution here is the compression code path to zero the remaining (untouched)
bytes of the last page it uncompressed data into, as the information about how
much space the file data consumes in the last page is not known in the upper layer
fs/btrfs/extent_io.c:__do_readpage(). In __do_readpage we were correctly zeroing
the remainder of the page but only if it corresponds to the last page of the inode
and if the inode's size is not a multiple of the page size.

This would cause not only returning random data on reads, but also permanently
storing random data when updating parts of the region that should be zeroed.
For the example above, it means updating a single byte in the region [285648 ; 286720[
would store that byte correctly but also store random data on disk.

A test case for xfstests follows soon.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Chris Mason <clm@fb.com>

A user reported a 100% cpu hang with my new delayed ref code.  Turns out I
forgot to increase the count check when we can't run a delayed ref because of
the tree mod log.  If we can't run any delayed refs during this there is no
point in continuing to look, and we need to break out.  Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>

Added in patch "btrfs: add ioctls to query/change feature bits online"
modifications to superblock don't need to reserve metadata blocks when
starting a transaction.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>

The set_fslabel ioctl uses btrfs_end_transaction, which means it's
possible that the change will be lost if the system crashes, same for
the newly set features. Let's use btrfs_commit_transaction instead.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>

Wang noticed that he was failing btrfs/030 even though me and Filipe couldn't
reproduce.  Turns out this is because Wang didn't have CONFIG_BTRFS_ASSERT set,
which meant that a key part of Filipe's original patch was not being built in.
This appears to be a mess up with merging Filipe's patch as it does not exist in
his original patch.  Fix this by changing how we make sure del_waiting_dir_move
asserts that it did not error and take the function out of the ifdef check.
This makes btrfs/030 pass with the assert on or off.  Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Filipe Manana <fdmanana@gmail.com>
Signed-off-by: Chris Mason <clm@fb.com>

It seems that when init_btrfs_fs() is called, crc32c/crc32c-intel might
not always be already initialized, which results in the call to crypto_alloc_shash()
returning -ENOENT, as experienced by Ahmet who reported this.

Therefore make sure init_btrfs_fs() is called after crc32c is initialized (which
is at initialization level 6, module_init), by using late_initcall (which is at
initialization level 7) instead of module_init for btrfs.
Reported-and-Tested-by: Ahmet Inan <ainan@mathematik.uni-freiburg.de>
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Chris Mason <clm@fb.com>