Small cleanup, update_fences() is used in the hangcheck path, but also
in the normal retire path.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>

It is somewhat redundant with the gpu tracepoints, and anyways not too
useful to justify spamming the log when debug traces are enabled.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>

We only want to use the _unlocked() variant in the unlocked case.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>

This also converts the special msm_gem_get_vaddr_active() to expect the
lock to already be held.  There are two call-sites for this, one already
has the lock held, so it is more straightforward to just open-code the
locking for the other caller.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>

Unfortunately, due to an dev_pm_opp locking interaction with
mm->mmap_sem, we need to do pm get before aquiring obj locks,
otherwise we can have anger lockdep with the chain:

  opp_table_lock --> &mm->mmap_sem --> reservation_ww_class_mutex

For an explicit fencing userspace, the impact should be minimal
as we do all the fence waits before this point.  It could result
in some needless resumes in error cases, etc.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>

We cannot switch to using obj->resv for locking without first moving all
the copy_from_user() ahead of submit_lock_objects().  Otherwise in the
mm fault path we aquire mm->mmap_sem before obj lock, but in the submit
path the order is reversed.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>

Move grabbing the bo lock into shrinker, with a msm_gem_trylock() to
skip over bo's that are already locked.  This gets rid of the nested
lock classes.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>

When we cut-over to using dma_resv_lock/etc instead of msm_obj->lock,
we'll need these for the submit path (where resv->lock is already held).
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>

We'll need to introduce a _locked() version of msm_gem_get_iova(), so we
need to make that name available.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>

This will make it easier to transition over to obj->resv locking for
everything that is per-bo locking.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>

The microcode bo's should never be madvise(WONTNEED), so these should
not be using msm_gem_get_vaddr_active().
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>

Reading VCO rate for this PLL can cause boot stalls, if it is not
enabled. Guard clk_hw_get_rate with a call to
dsi_pll_28nm_clk_is_enabled().
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

The dev_pm_opp_of_add_table() api initializes the icc nodes for gpu
indirectly. So we can avoid using of_icc_get() api in the common
probe path. To improve this, move of_icc_get() to target specific code
where it is required.

This patch helps to fix duplicate gpu node listed in the interconnect
summary from the debugfs.
Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

c33b7c03 ("drm/msm/dpu: add support for clk and bw scaling for
display") has added support for handling bandwidth voting in kms path in
addition to old mdss path. However this broke all other platforms since
_dpu_core_perf_crtc_update_bus() will now error out instead of properly
calculating bandwidth and core clocks. Fix
_dpu_core_perf_crtc_update_bus() to just skip bandwidth setting instead
of returning an error in case kms->num_paths == 0 (MDSS is used for
bandwidth management).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: c33b7c03 ("drm/msm/dpu: add support for clk and bw scaling for display")
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

Handle new merge_3d block setup in dpu encoder code. Pass correct mode
and id. Note, that merge_3d blocks are not handled via usual RM
reservation mechanism, as each merge_3d block is tied to two PPs, so by
reserving PP you get merge_3d automatically.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

Handle setting up merge mode in merge_3d hardware block.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

Active HW CTL blocks need separate handling for merge_3d flushes.
Implement necessary merge_3d configuration and flushing.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

Add initial support for merge3D hardware block on SM8[12]50. Merge3D is
reposible for merging contents of two LMs (two PPs) into single
interface.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

Instead of calling 4 callbacks to set pending masks, call just one to
update both pending_flush_mask and pending_intf_flush mask. Note, that
CMD mode support incorrectly did not update pending_intf_flush mask,
breaking CMD support on SC7180/SM8x50.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

Implement the shutdown callback for adreno gpu platform device
to safely shutdown it before a system reboot. This helps to avoid
futher transactions from gpu after the smmu is moved to bypass mode.
Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

Set link rate by using OPP set rate api so that CX level will be set
accordingly based on the link rate.

Changes in v2:
-- remove dev from dp_ctrl_put() parameters
-- Add more information to commit message

Changes in v3:
-- return when dev_pm_opp_set_clkname() failed
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

clk_prepare_enable() and clk_disable_unprepare() will check
NULL clock parameter, so It is not necessary to add additional checks.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

Implement phy_disable() callback to disable DSI PHY lanes and blocks
when phy is not used.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: ff73ff19 ("drm/msm/dsi: Populate the 10nm PHY funcs")
Signed-off-by: Rob Clark <robdclark@chromium.org>

Implement phy_disable() callback to disable DSI PHY lanes and blocks
when phy is not used.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: 1ef7c99d ("drm/msm/dsi: add support for 7nm DSI PHY/PLL")
Signed-off-by: Rob Clark <robdclark@chromium.org>

PHY disable/enable resets PLL registers to default values. Thus in
addition to restoring several registers we also need to restore VCO rate
settings.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: c6659785 ("drm/msm/dsi/pll: call vco set rate explicitly")
Signed-off-by: Rob Clark <robdclark@chromium.org>

PHY disable/enable resets PLL registers to default values. Thus in
addition to restoring several registers we also need to restore VCO rate
settings.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: 1ef7c99d ("drm/msm/dsi: add support for 7nm DSI PHY/PLL")
Signed-off-by: Rob Clark <robdclark@chromium.org>

Printk messages need newlines. Add it here.

Cc: Abhinav Kumar <abhinavk@codeaurora.org>
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Fixes: 25fdd593 ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

Bandwidth code was being used as test link rate. Fix this by converting
bandwidth code to test link rate

Do not reset voltage and pre-emphasis level during IRQ HPD attention
interrupt. Also fix pre-emphasis parsing during test link status process
Signed-off-by: Tanmay Shah <tanmay@codeaurora.org>
Fixes: 8ede2ecc ("drm/msm/dp: Add DP compliance tests on Snapdragon Chipsets")
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

fix warnings reported by make W=1
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c:195: warning: cannot
understand function prototype: 'const struct dpu_intr_reg
dpu_intr_set[] = '
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c:252: warning: cannot
understand function prototype: 'const struct dpu_irq_type
dpu_irq_map[] = '
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>

DRM_MSM fails to build with DRM_MSM_DP=n; add the missing stub.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Fixes: 8ede2ecc ("drm/msm/dp: Add DP compliance tests on
Signed-off-by: Rob Clark <robdclark@chromium.org>

dev_pm_opp_of_remove_table() doesn't report any errors when it fails to
find the OPP table with error -ENODEV (i.e. OPP table not present for
the device). And we can call dev_pm_opp_of_remove_table()
unconditionally here.

While at it, also create a label to put clkname.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

Use a SCHED_FIFO kthread_worker for async atomic commits.  We have a
hard deadline if we don't want to miss a frame.
Signed-off-by: Rob Clark <robdclark@chromium.org>

Add msm_kms_destroy() and add err return from msm_kms_init().  Prep work
for next patch.
Signed-off-by: Rob Clark <robdclark@chromium.org>

Signed-off-by: Rob Clark <robdclark@chromium.org>

lockdep dislikes seeing locks unwound in a non-nested fashion.

Fixes: b3d91800 ("drm/msm: Fix race condition in msm driver with async layer updates")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>

When there are back to back commits with async cursor update,
there is a case where second commit can program the DPU hw
blocks while first didn't complete flushing config to HW.

Synchronize the compositions such that second commit waits
until first commit flushes the composition.

This change also introduces per crtc commit lock, such that
commits on different crtcs are not blocked by each other.

Changes in v2:
	- Use an array of mutexes in kms to handle commit
	  lock per crtc. (Rob Clark)

Changes in v3:
	- Add wrapper functions to handle lock and unlock of
	  commit_lock for each crtc. (Rob Clark)
Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>

Use a more generic form for __section that requires quotes to avoid
complications with clang and gcc differences.

Remove the quote operator # from compiler_attributes.h __section macro.

Convert all unquoted __section(foo) uses to quoted __section("foo").
Also convert __attribute__((section("foo"))) uses to __section("foo")
even if the __attribute__ has multiple list entry forms.

Conversion done using the script at:

    https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.plSigned-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tid_addr is not a "pointer to (pointer to int in userspace)"; it is in
fact a "pointer to (pointer to int in userspace) in userspace".  So
sparse rightfully complains about passing a kernel pointer to
put_user().
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>