- 26 Aug, 2010 32 commits
-
-
David S. Miller authored
[ Upstream commit ef201beb ] As noticed by Linus, it is critical that some of the rwsem constants be signed. Yet, hex constants are unsigned unless explicitly casted or negated. The most critical one is RWSEM_WAITING_BIAS. This bug was exacerbated by commit 424acaae ("rwsem: wake queued readers when writer blocks on active read lock") Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
David S. Miller authored
[ Upstream commit bf8253bf5e7cfe17dd53e3f6340a45b11d9fb51c ] SunBlade-2500 has 'parallel' device node with compatible property "pnpALI,1533,3" so add that to the ID table. Reported-by:
Mikael Pettersson <mikpe@it.uu.se> Signed-off-by:
-
David S. Miller authored
[ Upstream commit bdd32ce9 ] These just represent the secondary and further heads attached to the card, and they have different sets of PCI bar registers to map. So don't try to drive them in the main driver. Reported-by:
Frans van Berckel <fberckel@xs4all.nl> Tested-by:
-
Carsten Otte authored
commit 1ab335d8 upstream. This patch fixes alignment of slab objects in case CONFIG_DEBUG_PAGEALLOC is active. Before this spot in kmem_cache_create, we have this situation: - align contains the required alignment of the object - cachep->obj_offset is 0 or equals align in case of CONFIG_DEBUG_SLAB - size equals the size of the object, or object plus trailing redzone in case of CONFIG_DEBUG_SLAB This spot tries to fill one page per object if the object is in certain size limits, however setting obj_offset to PAGE_SIZE - size does break the object alignment since size may not be aligned with the required alignment. This patch simply adds an ALIGN(size, align) to the equation and fixes the object size detection accordingly. This code in drivers/s390/cio/qdio_setup_init has lead to incorrectly aligned slab objects (sizeof(struct qdio_q) equals 1792): qdio_q_cache = kmem_cache_create("qdio_q", sizeof(struct qdio_q), 256, 0, NULL); Acked-by:
Christoph Lameter <cl@linux.com> Signed-off-by:
Carsten Otte <cotte@de.ibm.com> Signed-off-by:
Pekka Enberg <penberg@kernel.org> Signed-off-by:
-
Linus Torvalds authored
commit cd9f040d upstream. The hibernate issues that got fixed in commit 985b823b ("drm/i915: fix hibernation since i915 self-reclaim fixes") turn out to have been incomplete. Vefa Bicakci tested lots of hibernate cycles, and without the __GFP_RECLAIMABLE flag the system eventually fails to resume. With the flag added, Vefa can apparently hibernate forever (or until he gets bored running his automated scripts, whichever comes first). The reclaimable flag was there originally, and was one of the flags that were dropped (unintentionally) by commit 4bdadb97 ("drm/i915: Selectively enable self-reclaim") that introduced all these problems, but I didn't want to just blindly add back all the flags in commit 985b823b, and it looked like __GFP_RECLAIM wasn't necessary. It clearly was. I still suspect that there is some subtle reason we're missing that causes the problems, but __GFP_RECLAIMABLE is certainly not wrong to use in this context, and is what the code historically used. And we have no idea what the causes the corruption without it. Reported-and-tested-by:
M. Vefa Bicakci <bicave@superonline.com> Cc: Dave Airlie <airlied@gmail.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Linus Torvalds authored
commit 985b823b upstream. Since commit 4bdadb97 ("drm/i915: Selectively enable self-reclaim"), we've been passing GFP_MOVABLE to the i915 page allocator where we weren't before due to some over-eager removal of the page mapping gfp_flags games the code used to play. This caused hibernate on Intel hardware to result in a lot of memory corruptions on resume. See for example http://bugzilla.kernel.org/show_bug.cgi?id=13811 Reported-by: Evengi Golov (in bugzilla) Signed-off-by:
Dave Airlie <airlied@redhat.com> Tested-by:
-
Linus Torvalds authored
commit 0e8e50e2 upstream. Like the mlock() change previously, this makes the stack guard check code use vma->vm_prev to see what the mapping below the current stack is, rather than have to look it up with find_vma(). Also, accept an abutting stack segment, since that happens naturally if you split the stack with mlock or mprotect. Tested-by:
Ian Campbell <ijc@hellion.org.uk> Signed-off-by:
-
Linus Torvalds authored
commit 7798330a upstream. If we've split the stack vma, only the lowest one has the guard page. Now that we have a doubly linked list of vma's, checking this is trivial. Tested-by:
-
Linus Torvalds authored
commit 297c5eee upstream. It's a really simple list, and several of the users want to go backwards in it to find the previous vma. So rather than have to look up the previous entry with 'find_vma_prev()' or something similar, just make it doubly linked instead. Tested-by:
-
Kiyoshi Ueda authored
commit 98f33285 upstream. This patch changes dm_hash_remove_all() to release _hash_lock when removing a device. After removing the device, dm_hash_remove_all() takes _hash_lock and searches the hash from scratch again. This patch is a preparation for the next patch, which changes device deletion code to wait for md reference to be 0. Without this patch, the wait in the next patch may cause AB-BA deadlock: CPU0 CPU1 ----------------------------------------------------------------------- dm_hash_remove_all() down_write(_hash_lock) table_status() md = find_device() dm_get(md) <increment md->holders> dm_get_live_or_inactive_table() dm_get_inactive_table() down_write(_hash_lock) <in the md deletion code> <wait for md->holders to be 0> Signed-off-by:
Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by:
Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by:
Alasdair G Kergon <agk@redhat.com> Signed-off-by:
-
Alasdair G Kergon authored
commit 6bbf79a1 upstream. multipath_ctr() forgets to return an error after detecting missing path parameters. Fix this. Signed-off-by:
Patrick LoPresti <lopresti@gmail.com> Signed-off-by:
-
Chris Wilson authored
commit 5ddb954b upstream. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
-
Axel Lin authored
commit 93b352fc upstream. Test on a PXA310 platform with Samsung K9F2G08X0B NAND flash, with tCH=5 and clk is 156MHz, ns2cycle(5, 156000000) returns -1. ns2cycle returns negtive value will break NDTR0_tXX macros. After checking the commit log, I found the problem is introduced by commit 5b0d4d7c "[MTD] [NAND] pxa3xx: convert from ns to clock ticks more accurately" To get num of clock cycles, we use below equation: num of clock cycles = time (ns) / one clock cycle (ns) + 1 We need to add 1 cycle here because integer division will truncate the result. It is possible the developers set the Min values in SPEC for timing settings. Thus the truncate may cause problem, and it is safe to add an extra cycle here. The various fields in NDTR{01} are in units of clock ticks minus one, thus we should subtract 1 cycle then. Thus the correct equation should be: num of clock cycles = time (ns) / one clock cycle (ns) + 1 - 1 = time (ns) / one clock cycle (ns) Signed-off-by:
Axel Lin <axel.lin@gmail.com> Signed-off-by:
Lei Wen <leiwen@marvell.com> Acked-by:
Eric Miao <eric.y.miao@gmail.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com> Signed-off-by:
-
Maxim Levitsky authored
commit 6ccf15a1 upstream. Atheros PCIe wireless cards handled by ath5k do require L0s disabled. For distributions shipping with CONFIG_PCIEASPM (this will be enabled by default in the future in 2.6.36) this will also mean both L1 and L0s will be disabled when a pre 1.1 PCIe device is detected. We do know L1 works correctly even for all ath5k pre 1.1 PCIe devices though but cannot currently undue the effect of a blacklist, for details you can read pcie_aspm_sanity_check() and see how it adjusts the device link capability. It may be possible in the future to implement some PCI API to allow drivers to override blacklists for pre 1.1 PCIe but for now it is best to accept that both L0s and L1 will be disabled completely for distributions shipping with CONFIG_PCIEASPM rather than having this issue present. Motivation for adding this new API will be to help with power consumption for some of these devices. Example of issues you'd see: - On the Acer Aspire One (AOA150, Atheros Communications Inc. AR5001 Wireless Network Adapter [168c:001c] (rev 01)) doesn't work well with ASPM enabled, the card will eventually stall on heavy traffic with often 'unsupported jumbo' warnings appearing. Disabling ASPM L0s in ath5k fixes these problems. - On the same card you would see a storm of RXORN interrupts even though medium is idle. Credit for root causing and fixing the bug goes to Jussi Kivilinna. Cc: David Quan <David.Quan@atheros.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tim Gardner <tim.gardner@canonical.com> Cc: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by:
Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by:
Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Patrick J. LoPresti authored
commit 9b00c643 upstream. Running "cat /proc/mounts" fails to display the "lookupcache" option. This oversight cost me a bunch of wasted time recently. The following simple patch fixes it. Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
-
Russell King authored
commit 41e2e8fd upstream. Reviewed-by:
Arve Hjønnevåg <arve@android.com> Acked-by:
Dima Zavin <dima@android.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Jean Delvare authored
commit b9783dce upstream. It's not OK to call platform_device_add_resources() multiple times in a row. Despite its name, this functions sets the resources, it doesn't add them. So we have to prepare an array with all the resources, and then call platform_device_add_resources() once. Before this fix, only the last I/O resource would be actually registered. The other I/O resources were leaked. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Cc: Jim Cromie <jim.cromie@gmail.com> Signed-off-by:
-
Jiaju Zhang authored
commit 845b6cf3 upstream. Hi, Thanks a lot for all the review and comments so far;) I'd like to send the improved (V4) version of this patch. This patch fixes a deadlock in OCFS2 ACL. We found this bug in OCFS2 and Samba integration using scenario, the symptom is several smbd processes will be hung under heavy workload. Finally we found out it is the nested PR lock calling that leads to this deadlock: node1 node2 gr PR | V PR(EX)---> BAST:OCFS2_LOCK_BLOCKED | V rq PR | V wait=1 After requesting the 2nd PR lock, the process "smbd" went into D state. It can only be woken up when the 1st PR lock's RO holder equals zero. There should be an ocfs2_inode_unlock in the calling path later on, which can decrement the RO holder. But since it has been in uninterruptible sleep, the unlock function has no chance to be called. The related stack trace is: smbd D ffff8800013d0600 0 9522 5608 0x00000000 ffff88002ca7fb18 0000000000000282 ffff88002f964500 ffff88002ca7fa98 ffff8800013d0600 ffff88002ca7fae0 ffff88002f964340 ffff88002f964340 ffff88002ca7ffd8 ffff88002ca7ffd8 ffff88002f964340 ffff88002f964340 Call Trace: [<ffffffff80350425>] schedule_timeout+0x175/0x210 [<ffffffff8034f580>] wait_for_common+0xf0/0x210 [<ffffffffa03e12b9>] __ocfs2_cluster_lock+0x3b9/0xa90 [ocfs2] [<ffffffffa03e7665>] ocfs2_inode_lock_full_nested+0x255/0xdb0 [ocfs2] [<ffffffffa0446019>] ocfs2_get_acl+0x69/0x120 [ocfs2] [<ffffffffa0446368>] ocfs2_check_acl+0x28/0x80 [ocfs2] [<ffffffff800e3507>] acl_permission_check+0x57/0xb0 [<ffffffff800e357d>] generic_permission+0x1d/0xc0 [<ffffffffa03eecea>] ocfs2_permission+0x10a/0x1d0 [ocfs2] [<ffffffff800e3f65>] inode_permission+0x45/0x100 [<ffffffff800d86b3>] sys_chdir+0x53/0x90 [<ffffffff80007458>] system_call_fastpath+0x16/0x1b [<00007f34a4ef6927>] 0x7f34a4ef6927 For details, please see: https://bugzilla.novell.com/show_bug.cgi?id=614332 and http://oss.oracle.com/bugzilla/show_bug.cgi?id=1278Signed-off-by:
Jiaju Zhang <jjzhang@suse.de> Acked-by:
Mark Fasheh <mfasheh@suse.com> Signed-off-by:
Joel Becker <joel.becker@oracle.com> Signed-off-by:
-
Daniel Kiper authored
commit 05e40760 upstream. Fix a boot crash when apic=debug is used and the APIC is not properly initialized. This issue appears during Xen Dom0 kernel boot but the fix is generic and the crash could occur on real hardware as well. Signed-off-by:
Daniel Kiper <dkiper@net-space.pl> Cc: xen-devel@lists.xensource.com Cc: konrad.wilk@oracle.com Cc: jeremy@goop.org LKML-Reference: <20100819224616.GB9967@router-fw-old.local.net-space.pl> Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Borislav Petkov authored
commit d7c53c9e upstream. When testing cpu hotplug code on 32-bit we kept hitting the "CPU%d: Stuck ??" message due to multiple cores concurrently accessing the cpu_callin_mask, among others. Since these codepaths are not protected from concurrent access due to the fact that there's no sane reason for making an already complex code unnecessarily more complex - we hit the issue only when insanely switching cores off- and online - serialize hotplugging cores on the sysfs level and be done with it. [ v2.1: fix !HOTPLUG_CPU build ] Signed-off-by:
Borislav Petkov <borislav.petkov@amd.com> LKML-Reference: <20100819181029.GC17171@aftab> Signed-off-by:
H. Peter Anvin <hpa@linux.intel.com> Signed-off-by:
-
Wengang Wang authored
commit b11f1f1a upstream. When we need to take both dlm_domain_lock and dlm->spinlock, we should take them in order of: dlm_domain_lock then dlm->spinlock. There is pathes disobey this order. That is calling dlm_lockres_put() with dlm->spinlock held in dlm_run_purge_list. dlm_lockres_put() calls dlm_put() at the ref and dlm_put() locks on dlm_domain_lock. Fix: Don't grab/put the dlm when the initialising/releasing lockres. That grab is not required because we don't call dlm_unregister_domain() based on refcount. Signed-off-by:
Wengang Wang <wen.gang.wang@oracle.com> Signed-off-by:
-
Wengang Wang authored
commit a524812b upstream. In the following situation, there remains an incorrect bit in refmap on the recovery master. Finally the recovery master will fail at purging the lockres due to the incorrect bit in refmap. 1) node A has no interest on lockres A any longer, so it is purging it. 2) the owner of lockres A is node B, so node A is sending de-ref message to node B. 3) at this time, node B crashed. node C becomes the recovery master. it recovers lockres A(because the master is the dead node B). 4) node A migrated lockres A to node C with a refbit there. 5) node A failed to send de-ref message to node B because it crashed. The failure is ignored. no other action is done for lockres A any more. For mormal, re-send the deref message to it to recovery master can fix it. Well, ignoring the failure of deref to the original master and not recovering the lockres to recovery master has the same effect. And the later is simpler. Signed-off-by:
Srinivas Eeda <srinivas.eeda@oracle.com> Signed-off-by:
-
Tao Ma authored
commit 8a2e70c4 upstream. The refcount record calculation in ocfs2_calc_refcount_meta_credits is too optimistic that we can always allocate contiguous clusters and handle an already existed refcount rec as a whole. Actually because of file system fragmentation, we may have the chance to split a refcount record into 3 parts during the transaction. So consider the worst case in record calculation. Signed-off-by:
Tao Ma <tao.ma@oracle.com> Signed-off-by:
-
Srinivas Eeda authored
commit 7beaf243 upstream. This patch fixes two problems in dlm_run_purgelist 1. If a lockres is found to be in use, dlm_run_purgelist keeps trying to purge the same lockres instead of trying the next lockres. 2. When a lockres is found unused, dlm_run_purgelist releases lockres spinlock before setting DLM_LOCK_RES_DROPPING_REF and calls dlm_purge_lockres. spinlock is reacquired but in this window lockres can get reused. This leads to BUG. This patch modifies dlm_run_purgelist to skip lockres if it's in use and purge next lockres. It also sets DLM_LOCK_RES_DROPPING_REF before releasing the lockres spinlock protecting it from getting reused. Signed-off-by:
Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by:
-
Wengang Wang authored
commit 6d98c3cc upstream. When we have to take both dlm->master_lock and lockres->spinlock, take them in order lockres->spinlock and then dlm->master_lock. The patch fixes a violation of the rule. We can simply move taking dlm->master_lock to where we have dropped res->spinlock since when we access res->state and free mle memory we don't need master_lock's protection. Signed-off-by:
-
Tiger Yang authored
commit 6eda3dd3 upstream. Setting the acl while creating a new inode depends on the error codes of posix_acl_create_masq. This patch fix a issue of overwriting the error codes of it. Reported-by:
Pawel Zawora <pzawora@gmail.com> Signed-off-by:
Tiger Yang <tiger.yang@oracle.com> Signed-off-by:
-
Jonathan Woithe authored
commit 53bacfbb upstream. I discovered tonight that ALSA no longer sets up a stream for the second ADC provided by the Realtek ALC260 HDA codec. At some point alc_build_pcms() started using stream_analog_alt_capture when constructing the second ADC stream, but patch_alc260() was never updated accordingly. I have no idea when this regression occurred. The trivial patch to patch_alc260() given below fixes the problem as far as I can tell. The patch is against 2.6.35. Signed-off-by:
Jonathan Woithe <jwoithe@physics.adelaide.edu.au> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Jaroslav Kysela authored
commit 56385a12 upstream. With some hardware combinations, the PCM interrupts are acknowledged before the period boundary from the emu10k1 chip. The midlevel PCM code gets confused and the playback stream is interrupted. It seems that the interrupt processing shift by 2 samples is enough to fix this issue. This default value does not harm other, non-affected hardware. More information: Kernel bugzilla bug#16300 [A copmile warning fixed by tiwai] Signed-off-by:
Jaroslav Kysela <perex@perex.cz> Signed-off-by:
-
Takashi Iwai authored
commit a5ba6beb upstream. The detection and loading of firmeware on riptide driver has been broken due to rewrite of some codes, checking the presense wrongly. This patch fixes the logic again. Reference: kernel bug 16596 https://bugzilla.kernel.org/show_bug.cgi?id=16596Signed-off-by:
-
Mark Brown authored
commit b2c1e07b upstream. This is not supported by current hardware revisions. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by:
Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by:
-
Mark Brown authored
commit 4f0ed9a5 upstream. Signed-off-by:
-
Maxim Levitsky authored
commit d862b13b upstream. mspro_block_remove() is called from detect thread that first calls the mspro_block_stop(), which stops the request queue. If we call del_gendisk() with the queue stopped we get a deadlock. Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
- 20 Aug, 2010 3 commits
-
-
Greg Kroah-Hartman authored
-
Linus Torvalds authored
commit d7824370 upstream. This commit makes the stack guard page somewhat less visible to user space. It does this by: - not showing the guard page in /proc/<pid>/maps It looks like lvm-tools will actually read /proc/self/maps to figure out where all its mappings are, and effectively do a specialized "mlockall()" in user space. By not showing the guard page as part of the mapping (by just adding PAGE_SIZE to the start for grows-up pages), lvm-tools ends up not being aware of it. - by also teaching the _real_ mlock() functionality not to try to lock the guard page. That would just expand the mapping down to create a new guard page, so there really is no point in trying to lock it in place. It would perhaps be nice to show the guard page specially in /proc/<pid>/maps (or at least mark grow-down segments some way), but let's not open ourselves up to more breakage by user space from programs that depends on the exact deails of the 'maps' file. Special thanks to Henrique de Moraes Holschuh for diving into lvm-tools source code to see what was going on with the whole new warning. Reported-and-tested-by: François Valenduc <francois.valenduc@tvcablenet.be Reported-by:
Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by:
-
Linus Torvalds authored
commit 11ac5524 upstream. We do in fact need to unmap the page table _before_ doing the whole stack guard page logic, because if it is needed (mainly 32-bit x86 with PAE and CONFIG_HIGHPTE, but other architectures may use it too) then it will do a kmap_atomic/kunmap_atomic. And those kmaps will create an atomic region that we cannot do allocations in. However, the whole stack expand code will need to do anon_vma_prepare() and vma_lock_anon_vma() and they cannot do that in an atomic region. Now, a better model might actually be to do the anon_vma_prepare() when _creating_ a VM_GROWSDOWN segment, and not have to worry about any of this at page fault time. But in the meantime, this is the straightforward fix for the issue. See https://bugzilla.kernel.org/show_bug.cgi?id=16588 for details. Reported-by:
Wylda <wylda@volny.cz> Reported-by:
Sedat Dilek <sedat.dilek@gmail.com> Reported-by:
Mike Pagano <mpagano@gentoo.org> Reported-by:
François Valenduc <francois.valenduc@tvcablenet.be> Tested-by:
Ed Tomlinson <edt@aei.ca> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by:
-
- 13 Aug, 2010 5 commits
-
-
Greg Kroah-Hartman authored
-
Linus Torvalds authored
commit 96054569 upstream. It's wrong for several reasons, but the most direct one is that the fault may be for the stack accesses to set up a previous SIGBUS. When we have a kernel exception, the kernel exception handler does all the fixups, not some user-level signal handler. Even apart from the nested SIGBUS issue, it's also wrong to give out kernel fault addresses in the signal handler info block, or to send a SIGBUS when a system call already returns EFAULT. Signed-off-by:
-
Linus Torvalds authored
commit 5528f913 upstream. .. which didn't show up in my tests because it's a no-op on x86-64 and most other architectures. But we enter the function with the last-level page table mapped, and should unmap it at exit. Signed-off-by:
-
Linus Torvalds authored
commit 320b2b8d upstream. This is a rather minimally invasive patch to solve the problem of the user stack growing into a memory mapped area below it. Whenever we fill the first page of the stack segment, expand the segment down by one page. Now, admittedly some odd application might _want_ the stack to grow down into the preceding memory mapping, and so we may at some point need to make this a process tunable (some people might also want to have more than a single page of guarding), but let's try the minimal approach first. Tested with trivial application that maps a single page just below the stack, and then starts recursing. Without this, we will get a SIGSEGV _after_ the stack has smashed the mapping. With this patch, we'll get a nice SIGBUS just as the stack touches the page just above the mapping. Requested-by:
Keith Packard <keithp@keithp.com> Signed-off-by:
-
KAMEZAWA Hiroyuki authored
commit 966cca02 upstream. Since 2.6.31, swap_map[]'s refcounting was changed to show that a used swap entry is just for swap-cache, can be reused. Then, while scanning free entry in swap_map[], a swap entry may be able to be reclaimed and reused. It was caused by commit c9e44410 ("mm: reuse unused swap entry if necessary"). But this caused deta corruption at resume. The scenario is - Assume a clean-swap cache, but mapped. - at hibernation_snapshot[], clean-swap-cache is saved as clean-swap-cache and swap_map[] is marked as SWAP_HAS_CACHE. - then, save_image() is called. And reuse SWAP_HAS_CACHE entry to save image, and break the contents. After resume: - the memory reclaim runs and finds clean-not-referenced-swap-cache and discards it because it's marked as clean. But here, the contents on disk and swap-cache is inconsistent. Hance memory is corrupted. This patch avoids the bug by not reclaiming swap-entry during hibernation. This is a quick fix for backporting. Signed-off-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Reported-by:
Ondreg Zary <linux@rainbow-software.org> Tested-by:
Andrea Gelmini <andrea.gelmini@gmail.com> Signed-off-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
-
