- 15 Feb, 2024 10 commits
-
-
Su Bao Cheng authored
This new variant is derived from the Advanced PG2 board, removing the Arduino interface, and adding a new ASIC for communicating with the PLC 1200 signal modules. Signed-off-by:
Su Bao Cheng <baocheng.su@siemens.com> Signed-off-by:
Jan Kiszka <jan.kiszka@siemens.com> Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/595d8d79647a0f5e6e635a22ee0fee011f8a5c5e.1707463401.git.jan.kiszka@siemens.comSigned-off-by:
Vignesh Raghavendra <vigneshr@ti.com>
-
Andrejs Cainikovs authored
AM62 USB works with some devices, while failing to operate with others. [ 560.189822] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller [ 560.195631] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 2 [ 574.388509] xhci-hcd xhci-hcd.4.auto: can't setup: -110 [ 574.393814] xhci-hcd xhci-hcd.4.auto: USB bus 2 deregistered [ 574.399544] xhci-hcd: probe of xhci-hcd.4.auto failed with error -110 This seems to be related to LPM (Link Power Management), and disabling it turns USB into reliable working state. As per AM62 reference manual: > 4.8.2.1 USB2SS Unsupported Features > > The following features are not supported on this family of devices: > ... > - USB 2.0 ECN: Link Power Management (LPM) > ... Fixes: 2240f96c ("arm64: dts: ti: k3-am62-main: Add support for USB") Signed-off-by:
Andrejs Cainikovs <andrejs.cainikovs@toradex.com> Reviewed-by:
Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by:
Roger Quadros <rogerq@ti.com> Link: https://lore.kernel.org/r/20240209130213.38908-1-andrejs.cainikovs@gmail.comSigned-off-by:
-
Francesco Dolcini authored
Set VDD_CORE minimum voltage to 0.75V, TI AM62 can run at either 0.75V or 0.85V depending on the actual speed grade and on the maximum configured speed (1.4GHz frequency requires 0.85V). The actual value is programmed into the PMIC EEPROM during manufacturing (according to the SOC speed grade) and this ensure that both the voltage values are valid and therefore the OS will not overwrite the value programmed into the PMIC. Signed-off-by:
-
Tony Lindgren authored
The devices in the wkup domain are capable of waking up the system from suspend. We can configure the wkup domain devices in a generic way using the ti-sysc interconnect target module driver like we have done with the earlier TI SoCs. As ti-sysc manages the SYSCONFIG related registers independent of the child hardware device, the wake-up configuration is also set even if wkup_uart0 is reserved by sysfw. The wkup_uart0 device has interconnect target module register mapping like dra7 wkup uart. There is a 1 MB interconnect target range with one uart IP block in the target module. The power domain and clock affects the whole interconnect target module. Note we change the functional clock name to follow the ti-sysc binding and use "fck" instead of "fclk". Also note that we need to disable the target module reset as noted by Markus. Otherwise the sysfw using wkup_uart0 can get confused on some devices leading to boot time issues such as mbox timeouts. Tested-by:
Dhruva Gole <d-gole@ti.com> Reviewed-by:
Kevin Hilman <khilman@baylibre.com> Tested-by:
Markus Schneider-Pargmann <msp@baylibre.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20240213112510.6334-1-tony@atomide.comSigned-off-by:
-
Nathan Morrisson authored
The phyBOARD-Lyra has a GPIO fan header. This overlay enables the fan header and sets the fan to turn on at 65C. Signed-off-by:
Nathan Morrisson <nmorrisson@phytec.com> Reviewed-by:
Wadim Egorov <w.egorov@phytec.de> Link: https://lore.kernel.org/r/20240213005248.1027842-1-nmorrisson@phytec.comSigned-off-by:
-
Romain Naour authored
The tps659413 and tps659411 nodes set WKUP_GPIO0_7 (G28) pin as input to be used as PMIC interrupt but uses 9 (WKUP_GPIO0_9) as "interrupts" property. Replace 9 by 7 for both tps659413 and tps659411 after checking in the board schematic [1]. [1] https://www.ti.com/tool/SK-TDA4VM Fixes: b808cef0 ("arm64: dts: ti: k3-j721e-sk: Add TPS6594 family PMICs") Cc: Neha Malcom Francis <n-francis@ti.com> Signed-off-by:
Romain Naour <romain.naour@smile.fr> Reviewed-by:
Neha Malcom Francis <n-francis@ti.com> Link: https://lore.kernel.org/r/20240209171146.307465-2-romain.naour@smile.frSigned-off-by:
-
Romain Naour authored
The tps659413 node set WKUP_GPIO0_83 (AA37) pin as input to be used as PMIC interrupt but uses 39 (WKUP_GPIO0_39) as "interrupts" property. Replace 39 by 83 after checking in the board schematic [1]. [1] https://www.ti.com/tool/SK-AM69 Fixes: 865a1593 ("arm64: dts: ti: k3-am69-sk: Add support for TPS6594 PMIC") Cc: Neha Malcom Francis <n-francis@ti.com> Signed-off-by:
-
Andrejs Cainikovs authored
Add support for Verdin USB1 interface, implements role switch functionality using "gpio-usb-b-connector", VBUS is also now controlled with "regulator-fixed" using a standard GPIO. Signed-off-by:
-
Kishon Vijay Abraham I authored
Add overlay for PCIe (uses the second instance of PCIe in AM654x) and USB3.0 SERDES personality card The PCIe3/USB3 card is provided with the AM65x GP EVM configuration [1] so apply the overlay to k3-am654-gp-evm.dtb [1] https://www.ti.com/lit/ug/spruim7/spruim7.pdfSigned-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20240208-for-v6-9-am65-overlays-2-0-v2-3-70bae3e91597@kernel.orgSigned-off-by:
-
Roger Quadros authored
Enable both SERDES and PCIe DT nodes in order to get PCIe working on the SERDES PCIe x2 personality card. The daughter card also has a USB 2.0 dual-role port. As the base board already supports a 2.0 dual-role port, enable the port on the SERDES card to be a host only port. This will prevent user confusion as having 2 ports in device mode often leads to confusion as to which port is bound to the gadget function driver. The PCIe x2 card is provided with the AM65x IDK configuration [1] so apply the overlay to k3-am654-idk.dtb [1] https://www.ti.com/lit/ug/spruim6a/spruim6a.pdfCo-developed-by:
-
- 14 Feb, 2024 11 commits
-
-
Roger Quadros authored
Add the overlay dtbo file to a Makefile target so it can be picked by the dtbs_install command. Fixes: b8690ed3 ("arm64: dts: ti: am65x: Add Rocktech OLDI panel DT overlay") Signed-off-by:
Aradhya Bhatia <a-bhatia1@ti.com> Link: https://lore.kernel.org/r/20240208-for-v6-9-am65-overlays-2-0-v2-1-70bae3e91597@kernel.orgSigned-off-by:
-
Andrew Davis authored
The main_conf node does not need to be a syscon, so change to "simple-bus". This removes a DTS check warning. Signed-off-by:
Andrew Davis <afd@ti.com> Link: https://lore.kernel.org/r/20240124184722.150615-11-afd@ti.comSigned-off-by:
-
Andrew Davis authored
The main_conf node does not need to be a syscon, so change to "simple-bus". This removes a DTS check warning. Signed-off-by:
-
Andrew Davis authored
To do this we convert hbmc-mux to "reg-mux", then the FSS node does not need to be a syscon, so change to "simple-bus". This removes a DTS check warning. Signed-off-by:
-
Andrew Davis authored
This removes a dependency on the parent node being a syscon node. Convert from mmio-mux to reg-mux adjusting node name and properties as needed. Signed-off-by:
-
Andrew Davis authored
This removes a dependency on the parent node being a syscon node. Convert from mmio-mux to reg-mux adjusting node name and properties as needed. Signed-off-by:
-
Andrew Davis authored
This removes a dependency on the parent node being a syscon node. Convert from mmio-mux to reg-mux adjusting node name and properties as needed. Signed-off-by:
-
Andrew Davis authored
This removes a dependency on the parent node being a syscon node. Convert from mmio-mux to reg-mux adjusting node name and properties as needed. Signed-off-by:
-
Andrew Davis authored
This removes a dependency on the parent node being a syscon node. Convert from mmio-mux to reg-mux adjusting node name and properties as needed. Signed-off-by:
-
Andrew Davis authored
This removes a dependency on the parent node being a syscon node. Convert from mmio-mux to reg-mux adjusting node name and properties as needed. Signed-off-by:
-
Andrew Davis authored
This removes a dependency on the parent node being a syscon node. Convert from mmio-mux to reg-mux adjusting node name and properties as needed. Signed-off-by:
-
- 06 Feb, 2024 19 commits
-
-
Nishanth Menon authored
SPDX identifier GPL-2.0 has been deprecated since license list version 3.0. Use GPL-2.0-only to be specific. Signed-off-by:
Nishanth Menon <nm@ti.com> Acked-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20240122145539.194512-17-nm@ti.comSigned-off-by:
-
Nishanth Menon authored
SPDX identifier GPL-2.0 has been deprecated since license list version 3.0. Use GPL-2.0-only to be specific. Cc: Chao Zeng <chao.zeng@siemens.com> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Le Jin <le.jin@siemens.com> Acked-by:
-
Nishanth Menon authored
Modify license to include dual licensing as GPL-2.0-only OR MIT license for device trees belonging to PHYTEC Messtechnik GmbH and PHYTEC America, LLC platforms. This allows for Linux kernel device tree to be used in other Operating System ecosystems such as Zephyr or FreeBSD. While at this, update the GPL-2.0 to be GPL-2.0-only to be in sync with latest SPDX conventions (GPL-2.0 is deprecated). While at this, update the copyright year to sync with current year to indicate license change. Cc: Garrett Giordano <ggiordano@phytec.com> Cc: Wadim Egorov <w.egorov@phytec.de> Acked-by:
Garrett Giordano <ggiordano@phytec.com> Acked-by:
-
Nishanth Menon authored
Modify license to include dual licensing as GPL-2.0-only OR MIT license for device trees belonging to BeagleBoard.org Foundation platforms. This allows for Linux kernel device tree to be used in other Operating System ecosystems such as Zephyr or FreeBSD. While at this, update the GPL-2.0 to be GPL-2.0-only to be in sync with latest SPDX conventions (GPL-2.0 is deprecated). While at this, update the copyright year to sync with current year to indicate license change. Cc: Ayush Singh <ayushdevel1325@gmail.com> Cc: Jason Kridner <jkridner@beagleboard.org> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Cc: Robert Nelson <robertcnelson@gmail.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Wadim Egorov <w.egorov@phytec.de> Acked-by:
Ayush Singh <ayushdevel1325@gmail.com> Acked-by:
Jason Kridner <jkridner@beagleboard.org> Acked-by:
Robert Nelson <robertcnelson@gmail.com> Acked-by:
-
Nishanth Menon authored
Modify license to include dual licensing as GPL-2.0-only OR MIT license for SoC and TI evm device tree files. This allows for Linux kernel device tree to be used in other Operating System ecosystems such as Zephyr or FreeBSD. While at this, update the GPL-2.0 to be GPL-2.0-only to be in sync with latest SPDX conventions (GPL-2.0 is deprecated). While at this, update the TI copyright year to sync with current year to indicate license change. Signed-off-by:
-
Nishanth Menon authored
Modify license to include dual licensing as GPL-2.0-only OR MIT license for SoC and TI evm device tree files. This allows for Linux kernel device tree to be used in other Operating System ecosystems such as Zephyr or FreeBSD. While at this, update the GPL-2.0 to be GPL-2.0-only to be in sync with latest SPDX conventions (GPL-2.0 is deprecated). While at this, update the TI copyright year to sync with current year to indicate license change. Acked-by:
-
Nishanth Menon authored
Modify license to include dual licensing as GPL-2.0-only OR MIT license for SoC and TI evm device tree files. This allows for Linux kernel device tree to be used in other Operating System ecosystems such as Zephyr or FreeBSD. While at this, update the GPL-2.0 to be GPL-2.0-only to be in sync with latest SPDX conventions (GPL-2.0 is deprecated). While at this, update the TI copyright year to sync with current year to indicate license change (and add it at least for one file which was missing TI copyright). Cc: Apelete Seketeli <aseketeli@baylibre.com> Cc: Jerome Neanne <jneanne@baylibre.com> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Cc: Tony Lindgren <tony@atomide.com> Acked-by:
-
Nishanth Menon authored
Modify license to include dual licensing as GPL-2.0-only OR MIT license for SoC and TI evm device tree files. This allows for Linux kernel device tree to be used in other Operating System ecosystems such as Zephyr or FreeBSD. While at this, update the GPL-2.0 to be GPL-2.0-only to be in sync with latest SPDX conventions (GPL-2.0 is deprecated). While at this, update the TI copyright year to sync with current year to indicate license change (and add it at least for one file which was missing TI copyright). Cc: Esteban Blanc <eblanc@baylibre.com> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Cc: Pierre Gondois <pierre.gondois@arm.com> Cc: Tony Lindgren <tony@atomide.com> Acked-by:
Esteban Blanc <eblanc@baylibre.com> Acked-by:
Pierre Gondois <pierre.gondois@arm.com> Acked-by:
-
Nishanth Menon authored
Modify license to include dual licensing as GPL-2.0-only OR MIT license for SoC and TI evm device tree files. This allows for Linux kernel device tree to be used in other Operating System ecosystems such as Zephyr or FreeBSD. While at this, update the GPL-2.0 to be GPL-2.0-only to be in sync with latest SPDX conventions (GPL-2.0 is deprecated). While at this, update the TI copyright year to sync with current year to indicate license change (and add it at least for one file which was missing TI copyright). Cc: "Alexander A. Klimov" <grandmaster@al2klimov.de> Cc: Jerome Neanne <jneanne@baylibre.com> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Cc: Peng Fan <peng.fan@nxp.com> Cc: Pierre Gondois <pierre.gondois@arm.com> Cc: Tony Lindgren <tony@atomide.com> Acked-by:
-
Nishanth Menon authored
Modify license to include dual licensing as GPL-2.0-only OR MIT license for SoC and TI evm device tree files. This allows for Linux kernel device tree to be used in other Operating System ecosystems such as Zephyr or FreeBSD. While at this, update the GPL-2.0 to be GPL-2.0-only to be in sync with latest SPDX conventions (GPL-2.0 is deprecated). While at this, update the TI copyright year to sync with current year to indicate license change (and add it at least for one file which was missing TI copyright). Cc: Esteban Blanc <eblanc@baylibre.com> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Cc: Pierre Gondois <pierre.gondois@arm.com> Cc: Tony Lindgren <tony@atomide.com> Acked-by:
-
Nishanth Menon authored
Modify license to include dual licensing as GPL-2.0-only OR MIT license for SoC and TI evm device tree files. This allows for Linux kernel device tree to be used in other Operating System ecosystems such as Zephyr or FreeBSD. While at this, update the GPL-2.0 to be GPL-2.0-only to be in sync with latest SPDX conventions (GPL-2.0 is deprecated). While at this, update the TI copyright year to sync with current year to indicate license change (and add it at least for one file which was missing TI copyright). Cc: "Alexander A. Klimov" <grandmaster@al2klimov.de> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Cc: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Cc: Pierre Gondois <pierre.gondois@arm.com> Cc: Rob Herring <robh@kernel.org> Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Cc: Tony Lindgren <tony@atomide.com> Acked-by:
Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Acked-by:
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by:
-
Nishanth Menon authored
Modify license to include dual licensing as GPL-2.0-only OR MIT license for SoC and TI evm device tree files. This allows for Linux kernel device tree to be used in other Operating System ecosystems such as Zephyr or FreeBSD. While at this, update the GPL-2.0 to be GPL-2.0-only to be in sync with latest SPDX conventions (GPL-2.0 is deprecated). While at this, update the TI copyright year to sync with current year to indicate license change (and add it at least for one file which was missing TI copyright). Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Cc: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Cc: Pierre Gondois <pierre.gondois@arm.com> Cc: Roger Quadros <rogerq@kernel.org> Cc: Tony Lindgren <tony@atomide.com> Cc: Wadim Egorov <w.egorov@phytec.de> Acked-by:
Christian Gmeiner <christian.gmeiner@gmail.com> Acked-by:
-
Nishanth Menon authored
Modify license to include dual licensing as GPL-2.0-only OR MIT license for SoC and TI evm device tree files. This allows for Linux kernel device tree to be used in other Operating System ecosystems such as Zephyr or FreeBSD. While at this, update the GPL-2.0 to be GPL-2.0-only to be in sync with latest SPDX conventions (GPL-2.0 is deprecated). While at this, update the TI copyright year to sync with current year to indicate license change (and add it at least for one file which was missing TI copyright). Acked-by:
-
Nishanth Menon authored
Modify license to include dual licensing as GPL-2.0-only OR MIT license for SoC and TI evm device tree files. This allows for Linux kernel device tree to be used in other Operating System ecosystems such as Zephyr or FreeBSD. While at this, update the GPL-2.0 to be GPL-2.0-only to be in sync with latest SPDX conventions (GPL-2.0 is deprecated). While at this, update the TI copyright year to sync with current year to indicate license change (and add it at least for one file which was missing TI copyright). Cc: Guillaume La Roque <glaroque@baylibre.com> Cc: Julien Panis <jpanis@baylibre.com> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Cc: Pierre Gondois <pierre.gondois@arm.com> Cc: Roger Quadros <rogerq@kernel.org> Cc: Ronald Wahl <ronald.wahl@raritan.com> Cc: Sarah Walker <sarah.walker@imgtec.com> Cc: Tony Lindgren <tony@atomide.com> Acked-by:
Guillaume La Roque <glaroque@baylibre.com> Acked-by:
Julien Panis <jpanis@baylibre.com> Acked-by:
Ronald Wahl <ronald.wahl@raritan.com> Acked-by:
Sarah Walker <sarah.walker@imgtec.com> Acked-by:
-
Nishanth Menon authored
Modify license to include dual licensing as GPL-2.0-only OR MIT license for SoC and TI evm device tree files. This allows for Linux kernel device tree to be used in other Operating System ecosystems such as Zephyr or FreeBSD. While at this, update the GPL-2.0 to be GPL-2.0-only to be in sync with latest SPDX conventions (GPL-2.0 is deprecated). While at this, update the TI copyright year to sync with current year to indicate license change (and add it at least for one file which was missing TI copyright). Cc: Julien Panis <jpanis@baylibre.com> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Cc: Pierre Gondois <pierre.gondois@arm.com> Cc: Tony Lindgren <tony@atomide.com> Acked-by:
-
Nishanth Menon authored
Replace the pending http:// urls with https Signed-off-by:
-
Thomas Richard authored
For suspend to ram on j7200, use ti,j7200-padconf compatible to save and restore pinctrl contexts. Signed-off-by:
Thomas Richard <thomas.richard@bootlin.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
-
Vaishnav Achath authored
K3 Remoteproc R5 driver requires reserved memory carveouts and mailbox configuration to instantiate the cores successfully. Since this is a board level dependency, keep the R5 subsytem disabled at SoC dtsi, otherwise it results in probe errors like below during AM62P SK boot: r5fss@79000000: reserved memory init failed, ret = -22 r5fss@79000000: k3_r5_cluster_rproc_init failed, ret = -22 r5fss@78000000: reserved memory init failed, ret = -22 r5fss@78000000: k3_r5_cluster_rproc_init failed, ret = -22 Fixes: b5080c7c ("arm64: dts: ti: k3-am62p: Add nodes for more IPs") Signed-off-by:
Vaishnav Achath <vaishnav.a@ti.com> Reviewed-by:
Jayesh Choudhary <j-choudhary@ti.com> Reviewed-by:
-
Jayesh Choudhary authored
VP2 and VP3 are unused video ports and VP3 share the same parent clock as VP1 causing issue with pixel clock setting for HDMI (VP1). The current DM firmware does not support changing parent clock if it is shared by another component. It returns 0 for the determine_rate query before causing set_rate to set the clock at default maximum of 1.8GHz which is a lot more than the maximum frequency videoports can support (600MHz) causing SYNC LOST issues. So remove the parent clocks for unused VPs to avoid conflict. Fixes: 6f8605fd ("arm64: dts: ti: k3-am69-sk: Add DP and HDMI support") Reported-by:
Enric Balletbo i Serra <eballetbo@redhat.com> Link: https://lore.kernel.org/r/20240201142308.4954-1-j-choudhary@ti.comSigned-off-by:
-
