Attempting to build mach-rpc with gcc-9 or higher, or with any version
of clang results in a build failure, like:

arm-linux-gnueabi-gcc-11.1.0: error: unrecognized -march target: armv3m
arm-linux-gnueabi-gcc-11.1.0: note: valid arguments are: armv4 armv4t armv5t armv5te armv5tej armv6 armv6j armv6k armv6z armv6kz armv6zk armv6t2 armv6-m armv6s-m armv7 armv7-a armv7ve armv7-r armv7-m armv7e-m armv8-a armv8.1-a armv8.2-a armv8.3-a armv8.4-a armv8.5-a armv8.6-a armv8-m.base armv8-m.main armv8-r armv8.1-m.main iwmmxt iwmmxt2; did you mean 'armv4'?

Building with gcc-5 also fails in at least one of these ways:

/tmp/cczZoCcv.s:68: Error: selected processor does not support `bx lr' in ARM mode
drivers/tty/vt/vt_ioctl.c:958:1: internal compiler error: Segmentation fault

Handle this in Kconfig so we don't run into this with randconfig
builds, allowing only gcc-6 through gcc-8.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

On BE32 kernels, the __opcode_to_mem_thumb32() interface is intentionally
not defined, but it is referenced whenever runtime patching is enabled
for the kernel, which may be for ftrace, jump label, kprobes or kgdb:

arch/arm/kernel/patch.c: In function '__patch_text_real':
arch/arm/kernel/patch.c:94:32: error: implicit declaration of function '__opcode_to_mem_thumb32' [-Werror=implicit-function-declaration]
   94 |                         insn = __opcode_to_mem_thumb32(insn);
      |                                ^~~~~~~~~~~~~~~~~~~~~~~

Since BE32 kernels never run Thumb2 code, we never end up using the
result of this call, so providing an extern declaration without
a definition makes it build correctly.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

clang fails to build kernels with THUMB2 and FUNCTION_TRACER
enabled when there is any inline asm statement containing
the frame pointer register r7:

arch/arm/mach-exynos/mcpm-exynos.c:154:2: error: inline asm clobber list contains reserved registers: R7 [-Werror,-Winline-asm]
arch/arm/probes/kprobes/actions-thumb.c:449:3: error: inline asm clobber list contains reserved registers: R7 [-Werror,-Winline-asm]

Apparently gcc should also have warned about this, and the
configuration is actually invalid, though there is some
disagreement on the bug trackers about this.

Link: https://bugs.llvm.org/show_bug.cgi?id=45826
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=94986Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

For platforms that are not yet converted to ARCH_MULTIPLATFORM,
we can disable CONFIG_ARM_PATCH_PHYS_VIRT, which in turn requires
setting a correct address here.

As we actualy know what all the values are supposed to be based
on the old mach/memory.h header file contents (from git history),
we can just add them here.

This also solves a problem in Kconfig where 'make randconfig'
fails to continue if no number is selected for a 'hex' option.
Users can still override the number at configuration time, e.g.
when the memory visible to the kernel starts at a nonstandard
address on some machine, but it should no longer be required
now.

I originally posted this back in 2016, but the problem still
persists. The patch has gotten much simpler though, as almost
all platforms rely on ARM_PATCH_PHYS_VIRT now.

Link: https://lore.kernel.org/linux-arm-kernel/1455804123-2526139-5-git-send-email-arnd@arndb.de/Acked-by: Nicolas Pitre <nico@fluxnic.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

pgd_page_vaddr() returns an 'unsigned long' address, causing a warning
with the memcpy() call in kasan_init():

arch/arm/mm/kasan_init.c: In function 'kasan_init':
include/asm-generic/pgtable-nop4d.h:44:50: error: passing argument 2 of '__memcpy' makes pointer from integer without a cast [-Werror=int-conversion]
   44 | #define pgd_page_vaddr(pgd)                     ((unsigned long)(p4d_pgtable((p4d_t){ pgd })))
      |                                                 ~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      |                                                  |
      |                                                  long unsigned int
arch/arm/include/asm/string.h:58:45: note: in definition of macro 'memcpy'
   58 | #define memcpy(dst, src, len) __memcpy(dst, src, len)
      |                                             ^~~
arch/arm/mm/kasan_init.c:229:16: note: in expansion of macro 'pgd_page_vaddr'
  229 |                pgd_page_vaddr(*pgd_offset_k(KASAN_SHADOW_START)),
      |                ^~~~~~~~~~~~~~
arch/arm/include/asm/string.h:21:47: note: expected 'const void *' but argument is of type 'long unsigned int'
   21 | extern void *__memcpy(void *dest, const void *src, __kernel_size_t n);
      |                                   ~~~~~~~~~~~~^~~

Avoid this by adding an explicit typecast.

Link: https://lore.kernel.org/all/CACRpkdb3DMvof3-xdtss0Pc6KM36pJA-iy=WhvtNVnsDpeJ24Q@mail.gmail.com/

Fixes: 5615f69b ("ARM: 9016/2: Initialize the mapping of KASan shadow memory")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

A lot of randconfig builds end up not selecting any machine type at
all. This is generally fine for the purpose of compile testing, but
of course it means that the kernel is not usable on actual hardware,
and it causes a warning about this fact.

As most of the build bots now force-enable CONFIG_COMPILE_TEST for
randconfig builds, use that as a guard to control whether we warn
on this type of broken configuration.

We could do the same for the missing-cpu-type warning, but those
configurations fail to build much earlier.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

We can currently build a multi-cpu enabled kernel that allows both ARMv4
and ARMv5 CPUs, and also supports THUMB mode in user space.

However, returning to user space in this configuration with the usr_ret
macro requires the use of the 'bx' instruction, which is refused by
the assembler:

arch/arm/kernel/entry-armv.S: Assembler messages:
arch/arm/kernel/entry-armv.S:937: Error: selected processor does not support `bx lr' in ARM mode
arch/arm/kernel/entry-armv.S:960: Error: selected processor does not support `bx lr' in ARM mode
arch/arm/kernel/entry-armv.S:1003: Error: selected processor does not support `bx lr' in ARM mode
<instantiation>:2:2: note: instruction requires: armv4t
 bx lr

While it would be possible to handle this correctly in principle, doing so
seems to not be worth it, if we can simply avoid the problem by enforcing
that a kernel supporting both ARMv4 and a later CPU architecture cannot
run THUMB binaries.

This turned up while build-testing with clang; for some reason,
gcc never triggered the problem.
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

When configuring the kernel for big-endian, we set either BE-8 or BE-32
based on the CPU architecture level. Until linux-4.4, we did not have
any ARMv7-M platform allowing big-endian builds, but now i.MX/Vybrid
is in that category, adn we get a build error because of this:

arch/arm/kernel/module-plts.c: In function 'get_module_plt':
arch/arm/kernel/module-plts.c:60:46: error: implicit declaration of function '__opcode_to_mem_thumb32' [-Werror=implicit-function-declaration]

This comes down to picking the wrong default, ARMv7-M uses BE8
like ARMv7-A does. Changing the default gets the kernel to compile
and presumably works.

https://lore.kernel.org/all/1455804123-2526139-2-git-send-email-arnd@arndb.de/Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

Building with 'make W=1' shows a warning in some configurations
when 'verbose()' is defined to be empty.

arch/arm/probes/kprobes/test-core.c: In function 'kprobes_test_case_start':
arch/arm/probes/kprobes/test-core.c:1367:26: error: suggest braces around empty body in an 'else' statement [-Werror=empty-body]
 1367 |      current_instruction);
      |                          ^

Change the definition of verbose() to use no_printk(), allowing format
string checking and avoiding the warning.

Link: https://lore.kernel.org/all/20210322114600.3528031-1-arnd@kernel.org/Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

Convert the Assabet LEDs to use the gpiod APIs.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

When user code execution with privilege mode, it will lead to
infinite loop in the page fault handler if ARM_LPAE enabled,

The issue could be reproduced with
  "echo EXEC_USERSPACE > /sys/kernel/debug/provoke-crash/DIRECT"

As Permission fault shows in ARM spec,
  IFSR format when using the Short-descriptor translation table format
    Permission fault:       01101 First level      01111 Second level
  IFSR format when using the Long-descriptor translation table format
    Permission fault:       0011LL LL bits indicate levelb.

Add is_permission_fault() function to check permission fault and die
if permission fault occurred under instruction fault in do_page_fault().

Fixes: 1d4d3715 ("ARM: 8235/1: Support for the PXN CPU feature on ARMv7")
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

Provide die_kernel_fault() helper to do the kernel fault reporting,
which with msg argument, it could report different message in different
scenes, and the later patch "ARM: mm: Fix PXN process with LPAE feature"
will use it.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

Now the show_pts() will dump the virtual (hashed) address of page
table base, it is useless, kill it.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

Now the write fault check in do_page_fault() and access_error() twice,
we can cleanup access_error(), and make the fault check and vma flags set
into do_page_fault() directly, then pass the vma flags to __do_page_fault.

No functional change.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

The __do_page_fault() won't use task_struct argument, kill it
and also use current->mm directly in do_page_fault().

No functional change.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

Clean up the multiple goto statements and drops local variable
vm_fault_t fault, which will make the __do_page_fault() much more
readability.

No functional change.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

iMX6 needs to write some code to OCRAM which resumes the DDR controller
after suspend. However, merely using __arm_ioremap_exec() causes the
kernel to complain of a W+X mapping. Solve this by using the newly
introduced __arm_iomem_set_ro() function to prevent inadvertent or
malicious writes to code we may later execute.
Tested-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

__arm_iomem_set_ro() marks an ioremapped area read-only. This is
intended for use with __arm_ioremap_exec() to allow the kernel to
write some code into e.g. SRAM and then write-protect it so the
kernel doesn't complain about W+X mappings.
Tested-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

Add support for parsing the "linux,usable-memory-range" DT property.
This property is used to describe the usable memory reserved for the
crash dump kernel, and thus makes the memory reservation explicit.
If present, Linux no longer needs to mask the program counter, and rely
on the "mem=" kernel parameter to obtain the start and size of usable
memory.

For backwards compatibility, the traditional method to derive the start
of memory is still used if "linux,usable-memory-range" is absent.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

The remove callback is only called after probe completed successfully.
In this case platform_set_drvdata() was called with a non-NULL argument
and so !sdev is never true.

The motivation for this change is to get rid of non-zero return values
for remove callbacks as their only effect is to trigger a runtime
warning. See commit e5e1c209 ("driver core: platform: Emit a warning
if a remove callback returned non-zero") for further details.

Link: https://lore.kernel.org/linux-arm-kernel/20210721205450.2173923-1-u.kleine-koenig@pengutronix.deReviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

of_amba_device_create() uses irq_of_parse_and_map() to translate
a DT interrupt specification into a Linux virtual interrupt number.

But it doesn't properly handle the case where the interrupt controller
is not yet available, eg, when pl011 interrupt is connected to MBIGEN
interrupt controller, because the mbigen initialization is too late,
which will lead to no IRQ due to no IRQ domain found, log is shown below,
  "irq: no irq domain found for uart0 !"

use of_irq_get() to return -EPROBE_DEFER as above, and in the function
amba_device_try_add()/amba_device_add(), it will properly handle in such
case, also return 0 in other fail cases to be consistent as before.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Reported-by: Ruizhe Lin <linruizhe@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

After commit 77a7300a ("of/irq: Get rid of NO_IRQ usage"),
no irq case has been removed, irq_of_parse_and_map() will return
0 in all cases when get error from parse and map an interrupt into
linux virq space.

amba_device_register() is only used on no-DT initialization, see
  s3c64xx_pl080_init()		arch/arm/mach-s3c/pl080.c
  ep93xx_init_devices()		arch/arm/mach-ep93xx/core.c

They won't set -1 to irq[0], so no need the warn.

This reverts commit 2eac58d5.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

No one use the following functions, kill them.

  amba_aphb_device_add()
  amba_apb_device_add()
  amba_apb_device_add_res()
  amba_ahb_device_add()
  amba_ahb_device_add_res()

Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

Commit 344179fc ("ARM: 9106/1: traps: use get_kernel_nofault instead
of set_fs()") replaced an occurrence of __get_user() with
get_kernel_nofault(), but inverted the sense of the conditional in the
process, resulting in no values to be printed at all.

I.e., every exception stack now looks like this:

Exception stack(0xc18d1fb0 to 0xc18d1ff8)
1fa0:                                     ???????? ???????? ???????? ????????
1fc0: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ????????
1fe0: ???????? ???????? ???????? ???????? ???????? ????????

which is rather unhelpful.

Fixes: 344179fc ("ARM: 9106/1: traps: use get_kernel_nofault instead of set_fs()")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

Merge tag 'perf-tools-for-v5.15-2021-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull more perf tools updates from Arnaldo Carvalho de Melo:

 - Add missing fields and remove some duplicate fields when printing a
   perf_event_attr.

 - Fix hybrid config terms list corruption.

 - Update kernel header copies, some resulted in new kernel features
   being automagically added to 'perf trace' syscall/tracepoint argument
   id->string translators.

 - Add a file generated during the documentation build to .gitignore.

 - Add an option to build without libbfd, as some distros, like Debian
   consider its ABI unstable.

 - Add support to print a textual representation of IBS raw sample data
   in 'perf report'.

 - Fix bpf 'perf test' sample mismatch reporting

 - Fix passing arguments to stackcollapse report in a 'perf script'
   python script.

 - Allow build-id with trailing zeros.

 - Look for ImageBase in PE file to compute .text offset.

* tag 'perf-tools-for-v5.15-2021-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (25 commits)
  tools headers UAPI: Update tools's copy of drm.h headers
  tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
  tools headers UAPI: Sync linux/fs.h with the kernel sources
  tools headers UAPI: Sync linux/in.h copy with the kernel sources
  perf tools: Add an option to build without libbfd
  perf tools: Allow build-id with trailing zeros
  perf tools: Fix hybrid config terms list corruption
  perf tools: Factor out copy_config_terms() and free_config_terms()
  perf tools: Fix perf_event_attr__fprintf() missing/dupl. fields
  perf tools: Ignore Documentation dependency file
  perf bpf: Provide a weak btf__load_from_kernel_by_id() for older libbpf versions
  tools include UAPI: Update linux/mount.h copy
  perf beauty: Cover more flags in the  move_mount syscall argument beautifier
  tools headers UAPI: Sync linux/prctl.h with the kernel sources
  tools include UAPI: Sync sound/asound.h copy with the kernel sources
  tools headers UAPI: Sync linux/kvm.h with the kernel sources
  tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
  perf report: Add support to print a textual representation of IBS raw sample data
  perf report: Add tools/arch/x86/include/asm/amd-ibs.h
  perf env: Add perf_env__cpuid, perf_env__{nr_}pmu_mappings
  ...

Pull compiler attributes updates from Miguel Ojeda:

 - Fix __has_attribute(__no_sanitize_coverage__) for GCC 4 (Marco Elver)

 - Add Nick as Reviewer for compiler_attributes.h (Nick Desaulniers)

 - Move __compiletime_{error|warning} (Nick Desaulniers)

* tag 'compiler-attributes-for-linus-v5.15-rc1-v2' of git://github.com/ojeda/linux:
  compiler_attributes.h: move __compiletime_{error|warning}
  MAINTAINERS: add Nick as Reviewer for compiler_attributes.h
  Compiler Attributes: fix __has_attribute(__no_sanitize_coverage__) for GCC 4

Pull auxdisplay updates from Miguel Ojeda:
 "An assortment of improvements for auxdisplay:

   - Replace symbolic permissions with octal permissions (Jinchao Wang)

   - ks0108: Switch to use module_parport_driver() (Andy Shevchenko)

   - charlcd: Drop unneeded initializers and switch to C99 style (Andy
     Shevchenko)

   - hd44780: Fix oops on module unloading (Lars Poeschel)

   - Add I2C gpio expander example (Ralf Schlatterbeck)"

* tag 'auxdisplay-for-linus-v5.15-rc1' of git://github.com/ojeda/linux:
  auxdisplay: Replace symbolic permissions with octal permissions
  auxdisplay: ks0108: Switch to use module_parport_driver()
  auxdisplay: charlcd: Drop unneeded initializers and switch to C99 style
  auxdisplay: hd44780: Fix oops on module unloading
  auxdisplay: Add I2C gpio expander example

Pull CPU hotplug updates from Thomas Gleixner:
 "Updates for the SMP and CPU hotplug:

   - Remove DEFINE_SMP_CALL_CACHE_FUNCTION() which is a left over of the
     original hotplug code and now causing trouble with the ARM64 cache
     topology setup due to the pointless SMP function call.

     It's not longer required as the hotplug callbacks are guaranteed to
     be invoked on the upcoming CPU.

   - Remove the deprecated and now unused CPU hotplug functions

   - Rewrite the CPU hotplug API documentation"

* tag 'smp-urgent-2021-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Documentation: core-api/cpuhotplug: Rewrite the API section
  cpu/hotplug: Remove deprecated CPU-hotplug functions.
  thermal: Replace deprecated CPU-hotplug functions.
  drivers: base: cacheinfo: Get rid of DEFINE_SMP_CALL_CACHE_FUNCTION()

Merge tag 'char-misc-5.15-rc1-lkdtm' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull misc driver fix from Greg KH:
 "Here is a single patch for 5.15-rc1, for the lkdtm misc driver.

  It resolves a build issue that many people were hitting with your
  current tree, and Kees and others felt would be good to get merged
  before -rc1 comes out, to prevent them from having to constantly hit
  it as many development trees restart on -rc1, not older -rc releases.

  It has NOT been in linux-next, but has passed 0-day testing and looks
  'obviously correct' when reviewing it locally :)"

* tag 'char-misc-5.15-rc1-lkdtm' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  lkdtm: Use init_uts_ns.name instead of macros

Pull IPMI updates from Corey Minyard:
 "A couple of very minor fixes for style and rate limiting.

  Nothing big, but probably needs to go in"

* tag 'for-linus-5.15-1' of git://github.com/cminyard/linux-ipmi:
  char: ipmi: use DEVICE_ATTR helper macro
  ipmi: rate limit ipmi smi_event failure message

Pull scheduler fixes from Borislav Petkov:

 - Make sure the idle timer expires in hardirq context, on PREEMPT_RT

 - Make sure the run-queue balance callback is invoked only on the
   outgoing CPU

* tag 'sched_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Prevent balance_push() on remote runqueues
  sched/idle: Make the idle timer expire in hard interrupt context

Pull locking fixes from Borislav Petkov:

 - Fix the futex PI requeue machinery to not return to userspace in
   inconsistent state

 - Avoid a potential null pointer dereference in the ww_mutex deadlock
   check

 - Other smaller cleanups and optimizations

* tag 'locking_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/rtmutex: Fix ww_mutex deadlock check
  futex: Remove unused variable 'vpid' in futex_proxy_trylock_atomic()
  futex: Avoid redundant task lookup
  futex: Clarify comment for requeue_pi_wake_futex()
  futex: Prevent inconsistent state and exit race
  futex: Return error code instead of assigning it without effect
  locking/rwsem: Add missing __init_rwsem() for PREEMPT_RT

Pull timer fix from Borislav Petkov:

 - Handle negative second values properly when converting a timespec64
   to nanoseconds.

* tag 'timers_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  time: Handle negative seconds correctly in timespec64_to_ns()

Pull namei updates from Al Viro:
 "Clearing fallout from mkdirat in io_uring series. The fix in the
  kern_path_locked() patch plus associated cleanups"

* 'misc.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  putname(): IS_ERR_OR_NULL() is wrong here
  namei: Standardize callers of filename_create()
  namei: Standardize callers of filename_lookup()
  rename __filename_parentat() to filename_parentat()
  namei: Fix use after free in kern_path_locked

Pull smbfs updates from Steve French:
 "cifs/smb3 updates:

   - DFS reconnect fix

   - begin creating common headers for server and client

   - rename the cifs_common directory to smbfs_common to be more
     consistent ie change use of the name cifs to smb (smb3 or smbfs is
     more accurate, as the very old cifs dialect has long been
     superseded by smb3 dialects).

  In the future we can rename the fs/cifs directory to fs/smbfs.

  This does not include the set of multichannel fixes nor the two
  deferred close fixes (they are still being reviewed and tested)"

* tag '5.15-rc-cifs-part2' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: properly invalidate cached root handle when closing it
  cifs: move SMB FSCTL definitions to common code
  cifs: rename cifs_common to smbfs_common
  cifs: update FSCTL definitions

Pull virtio updates from Michael Tsirkin:

 - vduse driver ("vDPA Device in Userspace") supporting emulated virtio
   block devices

 - virtio-vsock support for end of record with SEQPACKET

 - vdpa: mac and mq support for ifcvf and mlx5

 - vdpa: management netlink for ifcvf

 - virtio-i2c, gpio dt bindings

 - misc fixes and cleanups

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (39 commits)
  Documentation: Add documentation for VDUSE
  vduse: Introduce VDUSE - vDPA Device in Userspace
  vduse: Implement an MMU-based software IOTLB
  vdpa: Support transferring virtual addressing during DMA mapping
  vdpa: factor out vhost_vdpa_pa_map() and vhost_vdpa_pa_unmap()
  vdpa: Add an opaque pointer for vdpa_config_ops.dma_map()
  vhost-iotlb: Add an opaque pointer for vhost IOTLB
  vhost-vdpa: Handle the failure of vdpa_reset()
  vdpa: Add reset callback in vdpa_config_ops
  vdpa: Fix some coding style issues
  file: Export receive_fd() to modules
  eventfd: Export eventfd_wake_count to modules
  iova: Export alloc_iova_fast() and free_iova_fast()
  virtio-blk: remove unneeded "likely" statements
  virtio-balloon: Use virtio_find_vqs() helper
  vdpa: Make use of PFN_PHYS/PFN_UP/PFN_DOWN helper macro
  vsock_test: update message bounds test for MSG_EOR
  af_vsock: rename variables in receive loop
  virtio/vsock: support MSG_EOR bit processing
  vhost/vsock: support MSG_EOR bit processing
  ...

Pull more RISC-V updates from Palmer Dabbelt:

 - A pair of defconfig additions, for NVMe and the EFI filesystem
   localization options.

 - A larger address space for stack randomization.

 - A cleanup to our install rules.

 - A DTS update for the Microchip Icicle board, to fix the serial
   console.

 - Support for build-time table sorting, which allows us to have
   __ex_table read-only.

* tag 'riscv-for-linus-5.15-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Move EXCEPTION_TABLE to RO_DATA segment
  riscv: Enable BUILDTIME_TABLE_SORT
  riscv: dts: microchip: mpfs-icicle: Fix serial console
  riscv: move the (z)install rules to arch/riscv/Makefile
  riscv: Improve stack randomisation on RV64
  riscv: defconfig: enable NLS_CODEPAGE_437, NLS_ISO8859_1
  riscv: defconfig: enable BLK_DEV_NVME

Pull coccinelle updates from Julia Lawall:
 "These changes update some existing semantic patches with
  respect to some recent changes in the kernel.

  Specifically, the change to kvmalloc.cocci searches for
  kfree_sensitive rather than kzfree, and the change to
  use_after_iter.cocci adds list_entry_is_head as a valid
  use of a list iterator index variable after the end of
  the loop"

* 'for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
  scripts: coccinelle: allow list_entry_is_head() to use pos
  coccinelle: api: rename kzfree to kfree_sensitive

Picking the changes from:

  17ce9c61 ("drm: document DRM_IOCTL_MODE_RMFB")

Doesn't result in any tooling changes:

  $ tools/perf/trace/beauty/drm_ioctl.sh  > before
  $ cp include/uapi/drm/drm.h tools/include/uapi/drm/drm.h
  $ tools/perf/trace/beauty/drm_ioctl.sh  > after
  $ diff -u before after

Silencing these perf build warnings:

  Warning: Kernel ABI header at 'tools/include/uapi/drm/drm.h' differs from latest version at 'include/uapi/drm/drm.h'
  diff -u tools/include/uapi/drm/drm.h include/uapi/drm/drm.h

Cc: Simon Ser <contact@emersion.fr>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>