- 21 Mar, 2019 2 commits
-
-
Gustavo A. R. Silva authored
info->stream is indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: sound/core/rawmidi.c:604 __snd_rawmidi_info_select() warn: potential spectre issue 'rmidi->streams' [r] (local cap) Fix this by sanitizing info->stream before using it to index rmidi->streams. Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://lore.kernel.org/lkml/20180423164740.GY17484@dhcp22.suse.cz/ Cc: stable@vger.kernel.org Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
Jian-Hong Pan authored
Some Acer AIO desktops like Veriton Z6860G, Z4860G and Z4660G cannot record sound from headset MIC. This patch adds the ALC286_FIXUP_ACER_AIO_HEADSET_MIC quirk to fix this issue. Fixes: 9f8aefed ("ALSA: hda/realtek: Fix mic issue on Acer AIO Veriton Z4660G") Fixes: b72f936f ("ALSA: hda/realtek: Fix mic issue on Acer AIO Veriton Z4860G/Z6860G") Signed-off-by:
Jian-Hong Pan <jian-hong@endlessm.com> Reviewed-by:
Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
- 19 Mar, 2019 2 commits
-
-
Hui Wang authored
Recently we found the audio jack detection stop working after suspend on many machines with Realtek codec. Sometimes the audio selection dialogue didn't show up after users plugged headhphone/headset into the headset jack, sometimes after uses plugged headphone/headset, then click the sound icon on the upper-right corner of gnome-desktop, it also showed the speaker rather than the headphone. The root cause is that before suspend, the codec already call the runtime_suspend since this codec is not used by any apps, then in resume, it will not call runtime_resume for this codec. But for some realtek codec (so far, alc236, alc255 and alc891) with the specific BIOS, if it doesn't run runtime_resume after suspend, all codec functions including jack detection stop working anymore. This problem existed for a long time, but it was not exposed, that is because when problem happens, if users play sound or open sound-setting to check audio device, this will trigger calling to runtime_resume (via snd_hda_power_up), then the codec starts working again before users notice this problem. Since we don't know how many codec and BIOS combinations have this problem, to fix it, let the driver call runtime_resume for all codecs in pm_resume, maybe for some codecs, this is not needed, but it is harmless. After a codec is runtime resumed, if it is not used by any apps, it will be runtime suspended soon and furthermore we don't run suspend frequently, this change will not add much power consumption. Fixes: cc72da7d ("ALSA: hda - Use standard runtime PM for codec power-save control") Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
Hui Wang authored
The commit 3baffc4a (ALSA: hda/intel: Refactoring PM code) changed the behaviour of azx_resume(), it triggers the jackpoll_work after applying this commit. This change introduced a new issue, all codecs are runtime active after S3, and will not call runtime_suspend() automatically. The root cause is the jackpoll_work calls snd_hda_power_up/down_pm, and it calls up_pm before snd_hdac_enter_pm is called, while calls the down_pm in the middle of enter_pm and leave_pm is called. This makes the dev->power.usage_count unbalanced after S3. To fix it, let azx_resume() don't trigger jackpoll_work as before it did. Fixes: 3baffc4a ("ALSA: hda/intel: Refactoring PM code") Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
- 18 Mar, 2019 2 commits
-
-
Colin Ian King authored
The function snd_opl3_drum_switch declaration in the header file has the order of the two arguments on_off and vel swapped when compared to the definition arguments of vel and on_off. Fix this by swapping them around to match the definition. This error predates the git history, so no idea when this error was introduced. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
Jaroslav Kysela authored
Another machine which does not like the power saving (noise): https://bugzilla.redhat.com/show_bug.cgi?id=1689623 Also, reorder the Lenovo C50 entry to keep the table sorted. Reported-by: hs.guimaraes@outlook.com Signed-off-by:
Jaroslav Kysela <perex@perex.cz> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
- 17 Mar, 2019 1 commit
-
-
Takashi Sakamoto authored
Current ALSA firewire-motu driver uses the value of 'model' field of unit directory in configuration ROM for modalias for MOTU FireWire models. However, as long as I checked, Pre8 and 828mk3(Hybrid) have the same value for the field (=0x100800). unit | version | model --------------- | --------- | ---------- 828mkII | 0x000003 | 0x101800 Traveler | 0x000009 | 0x107800 Pre8 | 0x00000f | 0x100800 <- 828mk3(FW) | 0x000015 | 0x106800 AudioExpress | 0x000033 | 0x104800 828mk3(Hybrid) | 0x000035 | 0x100800 <- When updating firmware for MOTU 8pre FireWire from v1.0.0 to v1.0.3, I got change of the value from 0x100800 to 0x103800. On the other hand, the value of 'version' field is fixed to 0x00000f. As a quick glance, the higher 12 bits of the value of 'version' field represent firmware version, while the lower 12 bits is unknown. By induction, the value of 'version' field represents actual model. This commit changes modalias to match the value of 'version' field, instead of 'model' field. For degug, long name of added sound card includes hexadecimal value of 'model' field. Fixes: 6c5e1ac0 ("ALSA: firewire-motu: add support for Motu Traveler") Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Cc: <stable@vger.kernel.org> # v4.19+ Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
- 16 Mar, 2019 2 commits
-
-
Kangjie Lu authored
In case request_region fails, the fix returns an error code to avoid NULL pointer dereference. Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
Kangjie Lu authored
In case ioremap_nocache fails, the fix releases chip and returns an error code upstream to avoid NULL pointer dereference. Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
- 14 Mar, 2019 3 commits
-
-
Kailang Yang authored
Enable headset mode support for new WYSE NB platform. Signed-off-by:
Kailang Yang <kailang@realtek.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
Kailang Yang authored
This patch will enable WYSE AIO for Headset mode. Signed-off-by:
Kailang Yang <kailang@realtek.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
Jaroslav Kysela authored
The ALC225_FIXUP_HEADSET_JACK fixup can be merged to alc295_fixup_chromebook. There are no other users for ALC225_FIXUP_HEADSET_JACK other than the chromebook hardware. Fixes: 10f5b1b8 ("ALSA: hda/realtek - Fixed Headset Mic JD not stable") Cc: Kailang Yang <kailang@realtek.com> Signed-off-by:
Jaroslav Kysela <perex@perex.cz> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
- 13 Mar, 2019 8 commits
-
-
Ricardo Biehl Pasquali authored
Signed-off-by:
Ricardo Biehl Pasquali <pasqualirb@gmail.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
Jaroslav Kysela authored
This is just a port of the ASoC Icelake HDMI codec code to the legacy HDA driver with some cleanups. ASoC commit 019033c8: "ASoC: Intel: hdac_hdmi: add Icelake support" Signed-off-by:
Jaroslav Kysela <perex@perex.cz> Cc: Bard liao <bard.liao@intel.com> Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
Jaroslav Kysela authored
Apply the HP_MIC_NO_PRESENCE fixups for the more HP Z2 G4 and HP Z240 models. Reported-by:
Jeff Burrell <jeff.burrell@hp.com> Signed-off-by:
Jaroslav Kysela <perex@perex.cz> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
Kailang Yang authored
It will be lose Mic JD state when Chrome OS boot and headset was plugged. Implement of reset combo jack JD. It will show normally. Fixes: e854747d ("ALSA: hda/realtek - Enable headset button support for new codec") Signed-off-by:
Kailang Yang <kailang@realtek.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
Jian-Hong Pan authored
The Acer TravelMate X514-51T with ALC255 cannot detect the headset MIC until ALC255_FIXUP_ACER_HEADSET_MIC quirk applied. Although, the internal DMIC uses another module - snd_soc_skl as the driver. We still need the NID 0x1a in the quirk to enable the headset MIC. Signed-off-by:
Jian-Hong Pan <jian-hong@endlessm.com> Signed-off-by:
Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
Arnd Bergmann authored
The #ifdef protection around the PM functions is wrong, leading to a failed reference in some configurations: sound/pci/hda/hda_tegra.c: In function 'hda_tegra_runtime_suspend': sound/pci/hda/hda_tegra.c:273:2: error: implicit declaration of function 'hda_tegra_disable_clocks'; did you mean 'hda_tegra_enable_clocks'? [-Werror=implicit-function-declaration] Better remove the #ifdefs entirely and rely on the compiler silently dropping unused functions marked __maybe_unused. Fixes: 707e0759 ("ALSA: hda/tegra: implement runtime suspend/resume") Acked-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
Aditya Pakki authored
usb_alloc_urb() can fail due to kmalloc failure and push the error upstream. Further this can cause a NULL pointer dereference in init_pipe_urbs(). This patch avoids such a scenario. Signed-off-by:
Aditya Pakki <pakki001@umn.edu> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
Mariusz Ceier authored
For ca0132 codec, azx_dev->stream is NULL during firmware loading. Calling snd_hdac_get_stream_stripe_ctl unconditionally causes NULL pointer dereference in that function. Fixes: 9b6f7e7a ("ALSA: hda: program stripe bits for controller") Signed-off-by:
Mariusz Ceier <mceier+kernel@gmail.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
- 28 Feb, 2019 2 commits
-
-
Manuel Reinhardt authored
Add an entry to the quirks-table to for usb-audio to recognize the Microbook II (although it only exposes vendor interfaces). A simple boot quirk is also implemented to set up the sample rate and make sure that no audio urbs are sent before the device is ready. This patch only provides audio playback and capture at 96kHz sample rate. Notice the following shortcomings: - The sample rate is currently hardcoded to 96k although the device also supports 48k and 44.1k. - The various mixer controls of the MicroBook are not made available. - The keep-iface control should be on by default because the device shuts down whenever the altsetting is reset which is usually unwanted. (I don't know the best way to do this) - The communication format used by the MicroBook for sample rate setting and also other setup has been reverse engineered by looking at the usbmon output while running the windows driver through virtualbox. In this patch the first byte of every message is set to \0 while in the observed communications the first byte acts as a "message-counter" increasing its value with every message sent. Leaving it at \0 does not seem to affect the device. Signed-off-by:
Manuel Reinhardt <manuel.rhdt@gmail.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Merge tag 'asoc-v5.1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next ASoC: More changes for v5.1 Another batch of changes for ASoC, no big core changes - it's mainly small fixes and improvements for individual drivers. - A big refresh and cleanup of the Samsung drivers, fixing a number of issues which allow the driver to be used with a wider range of userspaces. - Fixes for the Intel drivers to make them more standard so less likely to get bitten by core issues. - New driver for Cirrus Logic CS35L26.
-
- 26 Feb, 2019 15 commits
-
-
Mark Brown authored
-
Mark Brown authored
-
Olivier Moysan authored
Dummy write in capture master mode is used to gate bus clocks. This write is useless in slave mode as the clocks are not managed by slave. Signed-off-by:
Olivier Moysan <olivier.moysan@st.com> Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Olivier Moysan authored
When snd_pcm_stop_xrun() is called in interrupt routine, substream context may have already been released. Add protection on substream context. Signed-off-by:
Olivier Moysan <olivier.moysan@st.com> Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Olivier Moysan authored
Clocks do not need to be released on driver removal, as this is already managed before. Remove useless remove callback. Signed-off-by:
Olivier Moysan <olivier.moysan@st.com> Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Olivier Moysan authored
DMA configuration is not balanced on start/stop. Move DMA configuration to trigger callback. Signed-off-by:
Olivier Moysan <olivier.moysan@st.com> Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Olivier Moysan authored
Move counter handling to trigger start section to manage multiple start/stop events. Signed-off-by:
Olivier Moysan <olivier.moysan@st.com> Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Olivier Moysan authored
I2S supports 16 bits data in 32 channel length. However the expected driver behavior, is to set channel length to 16 bits when data format is 16 bits. Signed-off-by:
Olivier Moysan <olivier.moysan@st.com> Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Olivier Moysan authored
Because of regmap cache, interrupts may not be cleared as expected. Declare IFCR register as write only and make writings to IFCR register unconditional. Signed-off-by:
Olivier Moysan <olivier.moysan@st.com> Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Mark Brown authored
Merge branch 'for-5.0' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-5.1
-
Cheng-Yi Chiang authored
SND_SOC_CROS_EC_CODEC depends on MFD_CROS_EC. Add that dependency to SND_SOC_SDM845 to fix unmet direct dependencies warning. Fixes: 74c6ecf4 (ASoC: qcom: Kconfig: select dmic for sdm845) Signed-off-by:
Cheng-Yi Chiang <cychiang@chromium.org> Reported-by:
Randy Dunlap <rdunlap@infradead.org> Tested-by:
Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Jenny TC authored
This patch enables the reuse of kbl_da7219_max98927 machine driver to support max98373. The same machine driver is modified for cases where one amplifier is swapped out with another. Most of the changes are about renaming the codec and codec_dai names, with minor differences due to support for 24 bits in one case and 16 in the other. Signed-off-by:
Jenny TC <jenny.tc@intel.com> Acked-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Jiada Wang authored
Currently each SSI unit 's busif mode/adinr/dalign address is registered by: (in busif4 case) RSND_GEN_M_REG(SSI_BUSIF4_MODE, 0x500, 0x80) RSND_GEN_M_REG(SSI_BUSIF4_ADINR,0x504, 0x80) RSND_GEN_M_REG(SSI_BUSIF4_DALIGN, 0x508, 0x80) But according to user manual 41.1.4 Register Configuration ssi9 4/5/6/7 busif mode/adinr/dalign register address ( SSI9-[4/5/6/7]_BUSIF_[MODE/ADINR/DALIGN] ) are out of this rule. This patch registers ssi9 4/5/6/7 mode/adinr/dalign register as single register, and access these registers in case of SSI9 BUSIF 4/5/6/7. Fixes: commit 8c9d7503 ("ASoC: rsnd: ssiu: Support BUSIF other than BUSIF0") Signed-off-by:
Jiada Wang <jiada_wang@mentor.com> Signed-off-by:
Timo Wischer <twischer@de.adit-jv.com> Acked-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Takashi Sakamoto authored
In data blocks of common isochronous packet for MOTU devices, PCM frames are multiplexed in a shape of '24 bit * 4 Audio Pack', described in IEC 61883-6. The frames are not aligned to quadlet. For capture PCM substream, ALSA firewire-motu driver constructs PCM frames by reading data blocks byte-by-byte. However this operation includes bug for lower byte of the PCM sample. This brings invalid content of the PCM samples. This commit fixes the bug. Reported-by:
Peter Sjöberg <autopeter@gmail.com> Cc: <stable@vger.kernel.org> # v4.12+ Fixes: 4641c939 ("ALSA: firewire-motu: add MOTU specific protocol layer") Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
Takashi Sakamoto authored
ALSA bebob driver has an entry for Focusrite Saffire Pro 10 I/O. The entry matches vendor_id in root directory and model_id in unit directory of configuration ROM for IEEE 1394 bus. On the other hand, configuration ROM of Focusrite Liquid Saffire 56 has the same vendor_id and model_id. This device is an application of TCAT Dice (TCD2220 a.k.a Dice Jr.) however ALSA bebob driver can be bound to it randomly instead of ALSA dice driver. At present, drivers in ALSA firewire stack can not handle this situation appropriately. This commit uses more identical mod_alias for Focusrite Saffire Pro 10 I/O in ALSA bebob driver. $ python2 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 042a829d bus_info_length 4, crc_length 42, crc 33437 404 31333934 bus_name "1394" 408 f0649222 irmc 1, cmc 1, isc 1, bmc 1, pmc 0, cyc_clk_acc 100, max_rec 9 (1024), max_rom 2, gen 2, spd 2 (S400) 40c 00130e01 company_id 00130e | 410 000606e0 device_id 01000606e0 | EUI-64 00130e01000606e0 root directory ----------------------------------------------------------------- 414 0009d31c directory_length 9, crc 54044 418 04000014 hardware version 41c 0c0083c0 node capabilities per IEEE 1394 420 0300130e vendor 424 81000012 --> descriptor leaf at 46c 428 17000006 model 42c 81000016 --> descriptor leaf at 484 430 130120c2 version 434 d1000002 --> unit directory at 43c 438 d4000006 --> dependent info directory at 450 unit directory at 43c ----------------------------------------------------------------- 43c 0004707c directory_length 4, crc 28796 440 1200a02d specifier id: 1394 TA 444 13010001 version: AV/C 448 17000006 model 44c 81000013 --> descriptor leaf at 498 dependent info directory at 450 ----------------------------------------------------------------- 450 000637c7 directory_length 6, crc 14279 454 120007f5 specifier id 458 13000001 version 45c 3affffc7 (immediate value) 460 3b100000 (immediate value) 464 3cffffc7 (immediate value) 468 3d600000 (immediate value) descriptor leaf at 46c ----------------------------------------------------------------- 46c 00056f3b leaf_length 5, crc 28475 470 00000000 textual descriptor 474 00000000 minimal ASCII 478 466f6375 "Focu" 47c 73726974 "srit" 480 65000000 "e" descriptor leaf at 484 ----------------------------------------------------------------- 484 0004a165 leaf_length 4, crc 41317 488 00000000 textual descriptor 48c 00000000 minimal ASCII 490 50726f31 "Pro1" 494 30494f00 "0IO" descriptor leaf at 498 ----------------------------------------------------------------- 498 0004a165 leaf_length 4, crc 41317 49c 00000000 textual descriptor 4a0 00000000 minimal ASCII 4a4 50726f31 "Pro1" 4a8 30494f00 "0IO" $ python2 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 040442e4 bus_info_length 4, crc_length 4, crc 17124 404 31333934 bus_name "1394" 408 e0ff8112 irmc 1, cmc 1, isc 1, bmc 0, pmc 0, cyc_clk_acc 255, max_rec 8 (512), max_rom 1, gen 1, spd 2 (S400) 40c 00130e04 company_id 00130e | 410 018001e9 device_id 04018001e9 | EUI-64 00130e04018001e9 root directory ----------------------------------------------------------------- 414 00065612 directory_length 6, crc 22034 418 0300130e vendor 41c 8100000a --> descriptor leaf at 444 420 17000006 model 424 8100000e --> descriptor leaf at 45c 428 0c0087c0 node capabilities per IEEE 1394 42c d1000001 --> unit directory at 430 unit directory at 430 ----------------------------------------------------------------- 430 000418a0 directory_length 4, crc 6304 434 1200130e specifier id 438 13000001 version 43c 17000006 model 440 8100000f --> descriptor leaf at 47c descriptor leaf at 444 ----------------------------------------------------------------- 444 00056f3b leaf_length 5, crc 28475 448 00000000 textual descriptor 44c 00000000 minimal ASCII 450 466f6375 "Focu" 454 73726974 "srit" 458 65000000 "e" descriptor leaf at 45c ----------------------------------------------------------------- 45c 000762c6 leaf_length 7, crc 25286 460 00000000 textual descriptor 464 00000000 minimal ASCII 468 4c495155 "LIQU" 46c 49445f53 "ID_S" 470 41464649 "AFFI" 474 52455f35 "RE_5" 478 36000000 "6" descriptor leaf at 47c ----------------------------------------------------------------- 47c 000762c6 leaf_length 7, crc 25286 480 00000000 textual descriptor 484 00000000 minimal ASCII 488 4c495155 "LIQU" 48c 49445f53 "ID_S" 490 41464649 "AFFI" 494 52455f35 "RE_5" 498 36000000 "6" Cc: <stable@vger.kernel.org> # v3.16+ Fixes: 25784ec2 ("ALSA: bebob: Add support for Focusrite Saffire/SaffirePro series") Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
- 25 Feb, 2019 2 commits
-
-
Takashi Iwai authored
I set 10 seconds for the timeout of the i915 audio component binding with a hope that recent machines are fast enough to handle all probe tasks in that period, but I was too optimistic. The binding may take longer than that, and this caused a problem on the machine with both audio and graphics driver modules loaded in parallel, as Paul Menzel experienced. This problem haven't hit so often just because the KMS driver is loaded in initrd on most machines. As a simple workaround, extend the timeout to 60 seconds. Fixes: f9b54e19 ("ALSA: hda/i915: Allow delayed i915 audio component binding") Reported-by:
Paul Menzel <pmenzel+alsa-devel@molgen.mpg.de> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
Linus Torvalds authored
-
- 24 Feb, 2019 1 commit
-
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Paolo Bonzini: "Bug fixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: MMU: record maximum physical address width in kvm_mmu_extended_role kvm: x86: Return LA57 feature based on hardware capability x86/kvm/mmu: fix switch between root and guest MMUs s390: vsie: Use effective CRYCBD.31 to check CRYCBD validity
-