- 11 May, 2016 2 commits
-
-
Hariprasad S authored
commit 32cc92c7 upstream. For T4, kernel mode qps don't use the user doorbell. User mode qps during flow control db ringing are forced into kernel, where user doorbell is treated as kernel doorbell and proper bar2 offset in bar2 virtual space is calculated, which incase of T4 is a bogus address, causing a kernel panic due to illegal write during doorbell ringing. In case of T4, kernel mode qp bar2 virtual address should be 0. Added T4 check during bar2 virtual address calculation to return 0. Fixed Bar2 range checks based on bar2 physical address. The below oops will be fixed <1>BUG: unable to handle kernel paging request at 000000000002aa08 <1>IP: [<ffffffffa011d800>] c4iw_uld_control+0x4e0/0x880 [iw_cxgb4] <4>PGD 1416a8067 PUD 15bf35067 PMD 0 <4>Oops: 0002 [#1] SMP <4>last sysfs file: /sys/devices/pci0000:00/0000:00:03.0/0000:02:00.4/infiniband/cxgb4_0/node_guid <4>CPU 5 <4>Modules linked in: rdma_ucm rdma_cm ib_cm ib_sa ib_mad ib_uverbs ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge autofs4 target_core_iblock target_core_file target_core_pscsi target_core_mod configfs bnx2fc cnic uio fcoe libfcoe libfc scsi_transport_fc scsi_tgt 8021q garp stp llc cpufreq_ondemand acpi_cpufreq freq_table mperf vhost_net macvtap macvlan tun kvm uinput microcode iTCO_wdt iTCO_vendor_support sg joydev serio_raw i2c_i801 i2c_core lpc_ich mfd_core e1000e ptp pps_core ioatdma dca i7core_edac edac_core shpchp ext3 jbd mbcache sd_mod crc_t10dif pata_acpi ata_generic ata_piix iw_cxgb4 iw_cm ib_core ib_addr cxgb4 ipv6 dm_mirror dm_region_hash dm_log dm_mod [last unloaded: scsi_wait_scan] <4> Supermicro X8ST3/X8ST3 <4>RIP: 0010:[<ffffffffa011d800>] [<ffffffffa011d800>] c4iw_uld_control+0x4e0/0x880 [iw_cxgb4] <4>RSP: 0000:ffff880155a03db0 EFLAGS: 00010006 <4>RAX: 000000000000001d RBX: ffff88013ae5fc00 RCX: ffff880155adb180 <4>RDX: 000000000002aa00 RSI: 0000000000000001 RDI: ffff88013ae5fdf8 <4>RBP: ffff880155a03e10 R08: 0000000000000000 R09: 0000000000000001 <4>R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 <4>R13: 000000000000001d R14: ffff880156414ab0 R15: ffffe8ffffc05b88 <4>FS: 0000000000000000(0000) GS:ffff8800282a0000(0000) knlGS:0000000000000000 <4>CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b <4>CR2: 000000000002aa08 CR3: 000000015bd0e000 CR4: 00000000000007e0 <4>DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 <4>DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 <4>Process cxgb4 (pid: 394, threadinfo ffff880155a00000, task ffff880156414ab0) <4>Stack: <4> ffff880156415068 ffff880155adb180 ffff880155a03df0 ffffffffa00a344b <4><d> 00000000000003e8 ffff880155920000 0000000000000004 ffff880155920000 <4><d> ffff88015592d438 ffffffffa00a3860 ffff880155a03fd8 ffffe8ffffc05b88 <4>Call Trace: <4> [<ffffffffa00a344b>] ? enable_txq_db+0x2b/0x80 [cxgb4] <4> [<ffffffffa00a3860>] ? process_db_full+0x0/0xa0 [cxgb4] <4> [<ffffffffa00a38a6>] process_db_full+0x46/0xa0 [cxgb4] <4> [<ffffffff8109fda0>] worker_thread+0x170/0x2a0 <4> [<ffffffff810a6aa0>] ? autoremove_wake_function+0x0/0x40 <4> [<ffffffff8109fc30>] ? worker_thread+0x0/0x2a0 <4> [<ffffffff810a660e>] kthread+0x9e/0xc0 <4> [<ffffffff8100c28a>] child_rip+0xa/0x20 <4> [<ffffffff810a6570>] ? kthread+0x0/0xc0 <4> [<ffffffff8100c280>] ? child_rip+0x0/0x20 <4>Code: e9 ba 00 00 00 66 0f 1f 44 00 00 44 8b 05 29 07 02 00 45 85 c0 0f 85 71 02 00 00 8b 83 70 01 00 00 45 0f b7 ed c1 e0 0f 44 09 e8 <89> 42 08 0f ae f8 66 c7 83 82 01 00 00 00 00 44 0f b7 ab dc 01 <1>RIP [<ffffffffa011d800>] c4iw_uld_control+0x4e0/0x880 [iw_cxgb4] <4> RSP <ffff880155a03db0> <4>CR2: 000000000002aa08` Based on original work by Bharat Potnuri <bharat@chelsio.com> Fixes: 74217d4c ("iw_cxgb4: support for bar2 qid densities exceeding the page size") Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Reviewed-by:
Leon Romanovsky <leon@leon.nu> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Daniel Lezcano authored
commit 16eeed7e upstream. Commit 0881841f introduced a regression by inverting a test check after calling clocksource_mmio_init(). That results on the system to hang at boot time. Fix it by inverting the test again. Fixes: 0881841f ("Replace code by clocksource_mmio_init") Reported-by:
Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by:
-
- 04 May, 2016 38 commits
-
-
Greg Kroah-Hartman authored
-
Robert Jarzmik authored
commit c283e41e upstream. The DMA chip has a fixed number of requestor lines used for flow control. This number is platform dependent. The pxa_dma dma driver will use this value to activate or not the flow control. There won't be any impact on mmp_pdma driver. Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
-
Dan Carpenter authored
commit c4924e92 upstream. The info->status[] array has 3 elements. We are using size MAX77843_MUIC_IRQ_NUM (16) instead of MAX77843_MUIC_STATUS_NUM (3) as intended. Fixes: 135d9f7d ('extcon: max77843: Clear IRQ bits state before request IRQ') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Jaewon Kim <jaewon02.kim@samsung.com> Reviewed-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> [cw00.choi: Modify the patch title] Signed-off-by:
Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by:
-
Arnd Bergmann authored
commit 042d4460 upstream. The newly added STM code uses SRCU, but does not ensure that this code is part of the kernel: drivers/built-in.o: In function `stm_source_link_show': include/linux/srcu.h:221: undefined reference to `__srcu_read_lock' include/linux/srcu.h:238: undefined reference to `__srcu_read_unlock' drivers/built-in.o: In function `stm_source_link_drop': include/linux/srcu.h:221: undefined reference to `__srcu_read_lock' include/linux/srcu.h:238: undefined reference to `__srcu_read_unlock' This adds a Kconfig 'select' statement like all the other SRCU using drivers have. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: 7bd1d409 ("stm class: Introduce an abstraction for System Trace Module devices") Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by:
-
Jarkko Sakkinen authored
commit c0b5eed1 upstream. It's better to set the continueSession attribute for the unseal operation so that the session object is not removed as a side-effect when the operation is successful. Since a user process created the session, it should be also decide when the session is destroyed. Signed-off-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Fixes: 5beb0c43 ("keys, trusted: seal with a TPM2 authorization policy") Signed-off-by:
-
Jarkko Sakkinen authored
commit f3c82ade upstream. In my original patch sealing with policy was done with dynamically allocated buffer that I changed later into an array so the checks in tpm2-cmd.c became invalid. This patch fixes the issue. Fixes: 5beb0c43 ("keys, trusted: seal with a TPM2 authorization policy") Reported-by:
Peter Huewe <peterhuewe@gmx.de> Signed-off-by:
-
Arnd Bergmann authored
commit 3deb9438 upstream. gcc-6 found a dubious indentation in the megasas_mgmt_fw_ioctl function: drivers/scsi/megaraid/megaraid_sas_base.c: In function 'megasas_mgmt_fw_ioctl': drivers/scsi/megaraid/megaraid_sas_base.c:6658:4: warning: statement is indented as if it were guarded by... [-Wmisleading-indentation] kbuff_arr[i] = NULL; ^~~~~~~~~ drivers/scsi/megaraid/megaraid_sas_base.c:6653:3: note: ...this 'if' clause, but it is not if (kbuff_arr[i]) ^~ The code is actually correct, as there is no downside in clearing a NULL pointer again. This clarifies the code and avoids the warning by adding extra curly braces. Signed-off-by:
Hannes Reinecke <hare@suse.com> Acked-by:
Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
NeilBrown authored
commit a6ab1e81 upstream. sunrpc_cache_pipe_upcall() can detect a race if CACHE_PENDING is no longer set. In this case it aborts the queuing of the upcall. However it has already taken a new counted reference on "h" and doesn't "put" it, even though it frees the data structure holding the reference. So let's delay the "cache_get" until we know we need it. Fixes: f9e1aedc ("sunrpc/cache: remove races with queuing an upcall.") Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Caesar Wang authored
commit 43b4eb9f upstream. As the Dan report the smatch check the thermal driver warning: drivers/thermal/rockchip_thermal.c:551 rockchip_configure_from_dt() warn: impossible condition '(thermal->tshut_temp > ((~0 >> 1))) => (s32min-s32max > s32max)' Although The shut_temp read from DT is u32,the temperature is currently represented as int not long in the thermal driver. Let's change to make shut_temp instead of the thermal->tshut_temp for the condition. Fixes: commit 437df217 ("thermal: rockchip: consistently use int for temperatures") Reported-by:
Caesar Wang <wxt@rock-chips.com> Signed-off-by:
Eduardo Valentin <edubezval@gmail.com> Signed-off-by:
-
Al Viro authored
commit 6b87b70c upstream. Prior to 3.13 make allmodconfig KCONFIG_ALLCONFIG=/dev/null used to be equivalent to make allmodconfig; these days it hardwires MODULES to n. In fact, any KCONFIG_ALLCONFIG that doesn't set MODULES explicitly is treated as if it set it to n. Regression had been introduced by commit cfa98f ("kconfig: do not override symbols already set"); what happens is that conf_read_simple() does sym_calc_value(modules_sym) on exit, which leaves SYMBOL_VALID set and has conf_set_all_new_symbols() skip modules_sym. It's pretty easy to fix - simply move that call of sym_calc_value() into the callers, except for the ones in KCONFIG_ALLCONFIG handling. Objections? Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Fixes: cfa98f2e ("kconfig: do not override symbols already set") Signed-off-by:
Michal Marek <mmarek@suse.com> Signed-off-by:
-
Jiri Kosina authored
commit 838fe188 upstream. cleaner_kthread() is not marked freezable, and therefore calling try_to_freeze() in its context is a pointless no-op. In addition to that, as has been clearly demonstrated by 80ad623e ("Revert "btrfs: clear PF_NOFREEZE in cleaner_kthread()"), it's perfectly valid / legal for cleaner_kthread() to stay scheduled out in an arbitrary place during suspend (in that particular example that was waiting for reading of extent pages), so there is no need to leave any traces of freezer in this kthread. Fixes: 80ad623e ("Revert "btrfs: clear PF_NOFREEZE in cleaner_kthread()") Fixes: 69624913 ("btrfs: clear PF_NOFREEZE in cleaner_kthread()") Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Kinglong Mee authored
commit aa66b0bb upstream. When starting up linux with btrfs filesystem, I got many memory leak messages by kmemleak as, unreferenced object 0xffff880066882000 (size 4096): comm "modprobe", pid 730, jiffies 4294690024 (age 196.599s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff8174d52e>] kmemleak_alloc+0x4e/0xb0 [<ffffffff811d09aa>] kmem_cache_alloc_trace+0xea/0x1e0 [<ffffffffa03620fb>] btrfs_alloc_dummy_fs_info+0x6b/0x2a0 [btrfs] [<ffffffffa03624fc>] btrfs_alloc_dummy_block_group+0x5c/0x120 [btrfs] [<ffffffffa0360aa9>] btrfs_test_free_space_cache+0x39/0xed0 [btrfs] [<ffffffffa03b5a74>] trace_raw_output_xfs_attr_class+0x54/0xe0 [xfs] [<ffffffff81002122>] do_one_initcall+0xb2/0x1f0 [<ffffffff811765aa>] do_init_module+0x5e/0x1e9 [<ffffffff810fec09>] load_module+0x20a9/0x2690 [<ffffffff810ff439>] SyS_finit_module+0xb9/0xf0 [<ffffffff81757daf>] entry_SYSCALL_64_fastpath+0x12/0x76 [<ffffffffffffffff>] 0xffffffffffffffff unreferenced object 0xffff8800573f8000 (size 10256): comm "modprobe", pid 730, jiffies 4294690185 (age 196.460s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff8174d52e>] kmemleak_alloc+0x4e/0xb0 [<ffffffff8119ca6e>] kmalloc_order+0x5e/0x70 [<ffffffff8119caa4>] kmalloc_order_trace+0x24/0x90 [<ffffffffa03620b3>] btrfs_alloc_dummy_fs_info+0x23/0x2a0 [btrfs] [<ffffffffa03624fc>] btrfs_alloc_dummy_block_group+0x5c/0x120 [btrfs] [<ffffffffa036603d>] run_test+0xfd/0x320 [btrfs] [<ffffffffa0366f34>] btrfs_test_free_space_tree+0x94/0xee [btrfs] [<ffffffffa03b5aab>] trace_raw_output_xfs_attr_class+0x8b/0xe0 [xfs] [<ffffffff81002122>] do_one_initcall+0xb2/0x1f0 [<ffffffff811765aa>] do_init_module+0x5e/0x1e9 [<ffffffff810fec09>] load_module+0x20a9/0x2690 [<ffffffff810ff439>] SyS_finit_module+0xb9/0xf0 [<ffffffff81757daf>] entry_SYSCALL_64_fastpath+0x12/0x76 [<ffffffffffffffff>] 0xffffffffffffffff This patch lets btrfs using fs_info stored in btrfs_root for block group cache directly without allocating a new one. Fixes: d0bd4560 ("Btrfs: add fragment=* debug mount option") Signed-off-by:
Kinglong Mee <kinglongmee@gmail.com> Signed-off-by:
-
Fabio Estevam authored
commit 33b96d2c upstream. Currently we have an incorrect behaviour when multiple devices are present under the weim node. For example: &weim { ... status = "okay"; sram@0,0 { ... status = "okay"; }; mram@0,0 { ... status = "disabled"; }; }; In this case only the 'sram' device should be probed and not 'mram'. However what happens currently is that the status variable is ignored, causing the 'sram' device to be disabled and 'mram' to be enabled. Change the weim_parse_dt() function to use for_each_available_child_of_node()so that the devices marked with 'status = disabled' are not probed. Suggested-by:
Wolfgang Netbal <wolfgang.netbal@sigmatek.at> Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by:
Sascha Hauer <s.hauer@pengutronix.de> Acked-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Franklin S Cooper Jr authored
commit 883cbc90 upstream. This patch updates the GPMC's DT DMA property to reflect the updated eDMA bindings. Fixes: cce1ee00 ("ARM: DTS: am437x: Use the new DT bindings for the eDMA3") Signed-off-by:
Franklin S Cooper Jr <fcooper@ti.com> Acked-by:
Roger Quadros <rogerq@ti.com> Acked-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Franklin S Cooper Jr authored
commit a2abf904 upstream. This patch updates the GPMC's DT DMA property to reflect the updated eDMA bindings. Fixes: b5e50906 ("ARM: DTS: am33xx: Use the new DT bindings for the eDMA3") Signed-off-by:
-
Robert Jarzmik authored
commit 07c6b2d0 upstream. Since the switch from mmp_pdma to pxa_dma driver for pxa architectures, the pxa_dma requires 2 arguments, namely the requestor line and the requested priority. Fix the only left device node which was still passing only one argument, making the pxa3xx-nand driver misbehave in a device-tree configuration, ie. failing all data transfers. Fixes: c943646d ("ARM: dts: pxa: add dma engine node to pxa3xx-nand") Signed-off-by:
-
Lior Amsalem authored
commit b3a7f31e upstream. The Armada 375 has the same SATA IP as Armada 370 and Armada XP, which requires the PHY speed to be set in the LP_PHY_CTL register for SATA hotplug to work. Therefore, this commit updates the compatible string used to describe the SATA IP in Armada 375 from marvell,orion-sata to marvell,armada-370-sata. Fixes: 4de59085 ("ARM: mvebu: add Device Tree description of the Armada 375 SoC") Signed-off-by:
Lior Amsalem <alior@marvell.com> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
-
Arnd Bergmann authored
commit dc7eb9d5 upstream. We cannot select a symbol that has disabled dependencies, so we get a warning if we ever enable EXYNOS_THERMAL without also turning on THERMAL_OF: warning: (ARCH_EXYNOS) selects EXYNOS_THERMAL which has unmet direct dependencies (THERMAL && (ARCH_EXYNOS || COMPILE_TEST) && THERMAL_OF) This adds another 'select' in the platform code to avoid that case. Alternatively, we could decide to not select EXYNOS_THERMAL here and instead make it a user option. Signed-off-by:
-
Arnd Bergmann authored
commit ef2b1d77 upstream. The atlas7 clock controller driver registers a reset controller for itself, which causes a link error when the subsystem is disabled: drivers/built-in.o: In function `atlas7_clk_init': drivers/clk/sirf/clk-atlas7.c:1681: undefined reference to `reset_controller_register' As the clk driver does not have a Kconfig symbol for itself but it always built-in when the platform is enabled, we have to ensure that the reset controller subsystem is also built-in in this case. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Fixes: 301c5d29 ("clk: sirf: add CSR atlas7 clk and reset support") Signed-off-by:
-
Pali Rohár authored
commit 98f42221 upstream. Based on CPU type choose generic omap3 or omap3430 specific cpuidle parameters. Parameters for omap3430 were measured on Nokia N900 device and added by commit 5a1b1d3a ("OMAP3: RX-51: Pass cpu idle parameters") which were later removed by commit 231900af ("ARM: OMAP3: cpuidle - remove rx51 cpuidle parameters table") due to huge code complexity. This patch brings cpuidle parameters for omap3430 devices again, but uses simple condition based on CPU type. Fixes: 231900af ("ARM: OMAP3: cpuidle - remove rx51 cpuidle parameters table") Signed-off-by:
Pali Rohár <pali.rohar@gmail.com> Acked-by:
-
Andres Freund authored
commit 90989035 upstream. The 4b3a3212 ("perf hists browser: Support flat callchains") commit over-aggressively tried to optimize callchain_node__init_have_children(). That lead to --tui mode not allowing to expand call chain elements if a call chain element had only one parent. That's why --inverted callgraphs looked halfway sane, but plain ones didn't. Revert that individual optimization, it wasn't really related to the rest of the commit. Signed-off-by:
Andres Freund <andres@anarazel.de> Acked-by:
Namhyung Kim <namhyung@kernel.org> Tested-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Fixes: 4b3a3212 ("perf hists browser: Support flat callchains") Link: http://lkml.kernel.org/r/20160330190245.GB13305@awork2.anarazel.deSigned-off-by:
-
Peter Zijlstra authored
commit 8fdc6539 upstream. Stephane reported that commit: 3cbaa590 ("perf: Fix ctx time tracking by introducing EVENT_TIME") introduced a regression wrt. time tracking, as easily observed by: > This patch introduce a bug in the time tracking of events when > multiplexing is used. > > The issue is easily reproducible with the following perf run: > > $ perf stat -a -C 0 -e branches,branches,branches,branches,branches,branches -I 1000 > 1.000730239 652,394 branches (66.41%) > 1.000730239 597,809 branches (66.41%) > 1.000730239 593,870 branches (66.63%) > 1.000730239 651,440 branches (67.03%) > 1.000730239 656,725 branches (66.96%) > 1.000730239 <not counted> branches > > One branches event is shown as not having run. Yet, with > multiplexing, all events should run especially with a 1s (-I 1000) > interval. The delta for time_running comes out to 0. Yet, the event > has run because the kernel is actually multiplexing the events. The > problem is that the time tracking is the kernel and especially in > ctx_sched_out() is wrong now. > > The problem is that in case that the kernel enters ctx_sched_out() with the > following state: > ctx->is_active=0x7 event_type=0x1 > Call Trace: > [<ffffffff813ddd41>] dump_stack+0x63/0x82 > [<ffffffff81182bdc>] ctx_sched_out+0x2bc/0x2d0 > [<ffffffff81183896>] perf_mux_hrtimer_handler+0xf6/0x2c0 > [<ffffffff811837a0>] ? __perf_install_in_context+0x130/0x130 > [<ffffffff810f5818>] __hrtimer_run_queues+0xf8/0x2f0 > [<ffffffff810f6097>] hrtimer_interrupt+0xb7/0x1d0 > [<ffffffff810509a8>] local_apic_timer_interrupt+0x38/0x60 > [<ffffffff8175ca9d>] smp_apic_timer_interrupt+0x3d/0x50 > [<ffffffff8175ac7c>] apic_timer_interrupt+0x8c/0xa0 > > In that case, the test: > if (is_active & EVENT_TIME) > > will be false and the time will not be updated. Time must always be updated on > sched out. Fix this by always updating time if EVENT_TIME was set, as opposed to only updating time when EVENT_TIME changed. Reported-by:
Stephane Eranian <eranian@google.com> Tested-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: kan.liang@intel.com Cc: namhyung@kernel.org Fixes: 3cbaa590 ("perf: Fix ctx time tracking by introducing EVENT_TIME") Link: http://lkml.kernel.org/r/20160329072644.GB3408@twins.programming.kicks-ass.netSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Alexander Shishkin authored
commit 201c2f85 upstream. In the error path, event_file not being NULL is used to determine whether the event itself still needs to be free'd, so fix it up to avoid leaking. Reported-by:
Leon Yu <chianglungyu@gmail.com> Signed-off-by:
-
Allen Hubbe authored
commit 4f1b50c3 upstream. Kernel zero day testing warned about address space confusion. A virtual iomem address was used where a physical address is expected. The offending functions implement an optional part of the api, so they are removed. They can be added later, after testing. Fixes: a1b36958Signed-off-by:
Allen Hubbe <Allen.Hubbe@emc.com> Acked-by:
Xiangliang Yu <Xiangliang.Yu@amd.com> Signed-off-by:
Jon Mason <jdmason@kudzu.us> Signed-off-by:
-
Arnd Bergmann authored
commit 1985a881 upstream. The ntb driver assigns between pointers an __iomem tokens, and also casts them to 64-bit integers, which results in compiler warnings on 32-bit systems: drivers/ntb/test/ntb_perf.c: In function 'perf_copy': drivers/ntb/test/ntb_perf.c:213:10: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] vbase = (u64)(u64 *)mw->vbase; ^ drivers/ntb/test/ntb_perf.c:214:14: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] dst_vaddr = (u64)(u64 *)dst; ^ This adds __iomem annotations where needed and changes the temporary variables to iomem pointers to avoid casting them to u64. I did not see the problem in linux-next earlier, but it show showed up in 4.5-rc1. Signed-off-by:
Dave Jiang <dave.jiang@intel.com> Fixes: 8a7b6a77 ("ntb: ntb perf tool") Signed-off-by:
-
Borislav Petkov authored
commit f594bae0 upstream. I'm surprised this remained undocumented since at least 2011. And it is actually a very useful switch, as Steve and I came to realize recently. Add the text from 2cba3ffb ("perf stat: Add -d -d and -d -d -d options to show more CPU events") which added the incrementing aspect to -d. Tested-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
Marcin Ślusarz authored
commit 89fee59b upstream. Steam frequently puts game binaries in folders with spaces. Note: "(deleted)" markers are now treated as part of the file name. Signed-off-by:
Marcin Ślusarz <marcin.slusarz@gmail.com> Acked-by:
-
Namhyung Kim authored
commit 0c841c6c upstream. The commit 8c430a34 ("perf hists browser: Support folded callchains") missed to update hist_browser__dump() so it always shows graph-style callchains regardless of current setting. To fix that, factor out callchain printing code and rename the existing function which prints graph-style callchain. Signed-off-by:
-
Namhyung Kim authored
commit c221acb0 upstream. When this feature was introduced a check was made if there was a resolved symbol under the cursor, it got lost in commit ea7cd592 ("perf hists browser: Split popup menu actions - part 2"), reinstate it. Signed-off-by:
-
Ezequiel García authored
commit 20c07a5b upstream. Since commit 807f16d4 ("mtd: core: set some defaults when dev.parent is set"), it's now legal for drivers to call nand_scan and nand_scan_ident without setting mtd.owner. Drop the check and while at it remove the BUG() abuse. Fixes: 807f16d4 ("mtd: core: set some defaults when dev.parent is set") Signed-off-by:
Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Acked-by:
Boris Brezillon <boris.brezillon@free-electrons.com> [Brian: editorial note - while commit 807f16d4 wasn't explicitly broken, some follow-up commits in the v4.4 release broke a few drivers, since they would hit this BUG() if they used nand_scan() and were built as modules] Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
-
Florian Fainelli authored
commit d267aefc upstream. The BRCMNAND controller revision 7.1 is almost 100% compatible with the previous v6.0 register offset layout, except for the Correctable Error Reporting Threshold registers. Fix this by adding another table with the correct offsets for CORR_THRESHOLD and CORR_THRESHOLD_EXT. Fixes: 27c5b17c ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Cyrille Pitchen authored
commit 3b5394a3 upstream. This patch remove the micron_quad_enable() function which force the Quad SPI mode. However, once this mode is enabled, the Micron memory expect ALL commands to use the SPI 4-4-4 protocol. Hence a failure does occur when calling spi_nor_wait_till_ready() right after the update of the Enhanced Volatile Configuration Register (EVCR) in the micron_quad_enable() as the SPI controller driver is not aware about the protocol change. Since there is almost no performance increase using Fast Read 4-4-4 commands instead of Fast Read 1-1-4 commands, we rather keep on using the Extended SPI mode than enabling the Quad SPI mode. Let's take the example of the pretty standard use of 8 dummy cycles during Fast Read operations on 64KB erase sectors: Fast Read 1-1-4 requires 8 cycles for the command, then 24 cycles for the 3byte address followed by 8 dummy clock cycles and finally 65536*2 cycles for the read data; so 131112 clock cycles. On the other hand the Fast Read 4-4-4 would require 2 cycles for the command, then 6 cycles for the 3byte address followed by 8 dummy clock cycles and finally 65536*2 cycles for the read data. So 131088 clock cycles. The theorical bandwidth increase is 0.0%. Now using Fast Read operations on 512byte pages: Fast Read 1-1-4 needs 8+24+8+(512*2) = 1064 clock cycles whereas Fast Read 4-4-4 would requires 2+6+8+(512*2) = 1040 clock cycles. Hence the theorical bandwidth increase is 2.3%. Consecutive reads for non sequential pages is not a relevant use case so The Quad SPI mode is not worth it. mtd_speedtest seems to confirm these figures. Signed-off-by:
Cyrille Pitchen <cyrille.pitchen@atmel.com> Fixes: 548cd3ab ("mtd: spi-nor: Add quad I/O support for Micron SPI NOR") Signed-off-by:
-
Kunihiko Hayashi authored
commit 3de7beeb upstream. This patch fixes condition whether the specified address ranges overlap each other. Fixes: 4b7f48d3 ("bus: uniphier-system-bus: add UniPhier System Bus driver") Signed-off-by:
Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Chao Yu authored
commit ed3360ab upstream. This patch syncs f2fs with commit 6bc445e0 ("ext4 crypto: make sure the encryption info is initialized on opendir(2)") from ext4. Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
Chao Yu <chao2.yu@samsung.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Chao Yu authored
commit ae108668 upstream. This patch syncs f2fs with commit abdd438b ("ext4 crypto: handle unexpected lack of encryption keys") from ext4. Fix up attempts by users to try to write to a file when they don't have access to the encryption key. Signed-off-by:
-
Jaegeuk Kim authored
commit e3ef1876 upstream. If end_io gets an error, we don't need to set the page as dirty, since we already set f2fs_stop_checkpoint which will not flush any data. This will resolve the following warning. ====================================================== [ INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected ] 4.4.0+ #9 Tainted: G O ------------------------------------------------------ xfs_io/26773 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: (&(&sbi->inode_lock[i])->rlock){+.+...}, at: [<ffffffffc025483f>] update_dirty_page+0x6f/0xd0 [f2fs] and this task is already holding: (&(&q->__queue_lock)->rlock){-.-.-.}, at: [<ffffffff81396ea2>] blk_queue_bio+0x422/0x490 which would create a new lock dependency: (&(&q->__queue_lock)->rlock){-.-.-.} -> (&(&sbi->inode_lock[i])->rlock){+.+...} Signed-off-by:
-
Jaegeuk Kim authored
commit 3c082b7b upstream. We should consider data block allocation to trigger f2fs_balance_fs. Signed-off-by:
-
Jaegeuk Kim authored
commit 03a8bb0e upstream. As Al pointed, d_revalidate should return RCU lookup before using d_inode. This was originally introduced by: commit 34286d66 ("fs: rcu-walk aware d_revalidate method"). Reported-by:
-
