- 22 Feb, 2017 40 commits
-
-
James Smart authored
NVME Target: Add debugfs support Adds debugfs snippets to cover the new NVME target functionality Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <james.smart@broadcom.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
James Smart authored
NVME Target: Tie in to NVME Fabrics nvmet_fc LLDD target api Adds the routines to: - register and deregister the FC port as a nvmet-fc targetport - binding of nvme queues to adapter WQs - receipt and passing of NVME LS's to transport, sending transport response - receipt of NVME FCP CMD IUs, processing FCP target io data transmission commands; transmission of FCP io response - Abort operations for tgt io exchanges [mkp: fixed space at end of file warning] Signed-off-by:
-
James Smart authored
NVME Target: Merge into FC discovery Adds NVME PRLI handling and Nameserver registrations for NVME Signed-off-by:
-
James Smart authored
NVME Target: Receive buffer updates Allocates buffer pools and configures adapter interfaces to handle receive buffer (asynchronous FCP CMD ius, first burst data) from the adapter. Splits by protocol, etc. Signed-off-by:
-
James Smart authored
NVME Target: Base modifications This set of patches adds the base modifications for NVME target support The base modifications consist of: - Additional module parameters or configuration tuning - Enablement of configuration mode for NVME target. Ties into the queueing model put into place by the initiator basemods patches. - Target-specific buffer pools, dma pools, sgl pools [mkp: fixed space at end of file] Signed-off-by:
-
James Smart authored
NVME Initiator: Add debugfs support Adds debugfs snippets to cover the new NVME initiator functionality Signed-off-by:
-
James Smart authored
NVME Initiator: Tie in to NVME Fabrics nvme_fc LLDD initiator api Adds the routines to: - register and deregister the FC port as a nvme-fc initiator localport - register and deregister remote FC ports as a nvme-fc remoteport - binding of nvme queues to adapter WQs - send/perform NVME LS's - send/perform NVME FCP initiator io operations Signed-off-by:
-
James Smart authored
NVME Initiator: Merge into FC discovery Adds NVME PRLI support and Nameserver registrations and Queries for NVME Signed-off-by:
-
James Smart authored
NVME Initiator: Base modifications This patch adds base modifications for NVME initiator support. The base modifications consist of: - Formal split of SLI3 rings from SLI-4 WQs (sometimes referred to as rings as well) as implementation now widely varies between the two. - Addition of configuration modes: SCSI initiator only; NVME initiator only; NVME target only; and SCSI and NVME initiator. The configuration mode drives overall adapter configuration, offloads enabled, and resource splits. NVME support is only available on SLI-4 devices and newer fw. - Implements the following based on configuration mode: - Exchange resources are split by protocol; Obviously, if only 1 mode, then no split occurs. Default is 50/50. module attribute allows tuning. - Pools and config parameters are separated per-protocol - Each protocol has it's own set of queues, but share interrupt vectors. SCSI: SLI3 devices have few queues and the original style of queue allocation remains. SLI4 devices piggy back on an "io-channel" concept that eventually needs to merge with scsi-mq/blk-mq support (it is underway). For now, the paradigm continues as it existed prior. io channel allocates N msix and N WQs (N=4 default) and either round robins or uses cpu # modulo N for scheduling. A bunch of module parameters allow the configuration to be tuned. NVME (initiator): Allocates an msix per cpu (or whatever pci_alloc_irq_vectors gets) Allocates a WQ per cpu, and maps the WQs to msix on a WQ # modulo msix vector count basis. Module parameters exist to cap/control the config if desired. - Each protocol has its own buffer and dma pools. I apologize for the size of the patch. Signed-off-by: -
James Smart authored
Create common wq, cq, eq, rq dump functions Signed-off-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
-
James Smart authored
Create common wq, cq, eq, rq print functions Signed-off-by:
-
James Smart authored
This contains code cleanups that were in the prior patch set. This allows better review of real changes later. minor code cleanups: fix indentation, punctuation, line length addition/reduction of whitespace remove unneeded parens, braces lpfc_debugfs_nodelist_data: print as u64 rather than byte by byte covert printk(KERN_ERR to pr_err small print string deltas use num_present_cpus() rather than count them comment updates rctl/type names moved to module variable, not on stack Signed-off-by:
-
Christoph Hellwig authored
This avoids having to store the msix_entries array and simpliefies the shutdown and cleanup path a lot. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
James Smart authored
Correct WQ creation for pagesize The driver was calculating the adapter command pagesize indicator from the system pagesize. However, the buffers the driver allocates are only one size (SLI4_PAGE_SIZE), so no calculation was necessary. Signed-off-by:
-
Matthew R. Ochs authored
Add support for a future IBM Coherent Accelerator (CXL) flash AFU with an ID of 0x0624. Signed-off-by:
Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Signed-off-by:
Uma Krishnan <ukrishn@linux.vnet.ibm.com> Signed-off-by:
-
Hannes Reinecke authored
The device handler needs to check if a given queue belongs to a scsi device; only then does it make sense to attach a device handler. [mkp: dropped flags] Cc: <stable@vger.kernel.org> Signed-off-by:
-
Subhash Jadavani authored
Dan Carpenter <dan.carpenter@oracle.com> reported this: The patch 9c46b867: "scsi: ufs-qcom: dump additional testbus registers" from Feb 3, 2017, leads to the following static checker warning: drivers/scsi/ufs/ufs-qcom.c:1531 ufs_qcom_testbus_cfg_is_ok() warn: impossible condition '(host->testbus.select_minor > 255) => (0-255 > 255)' drivers/scsi/ufs/ufs-qcom.c 1517 static bool ufs_qcom_testbus_cfg_is_ok(struct ufs_qcom_host *host) 1518 { 1519 if (host->testbus.select_major >= TSTBUS_MAX) { 1520 dev_err(host->hba->dev, 1521 "%s: UFS_CFG1[TEST_BUS_SEL} may not equal 0x%05X\n", 1522 __func__, host->testbus.select_major); 1523 return false; 1524 } 1525 1526 /* 1527 * Not performing check for each individual select_major 1528 * mappings of select_minor, since there is no harm in 1529 * configuring a non-existent select_minor 1530 */ 1531 if (host->testbus.select_minor > 0xFF) { ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ It might make sense to keep this check. I don't know. But it's confusing that 0xFF is a magic number. Better to make it a define. 1532 dev_err(host->hba->dev, 1533 "%s: 0x%05X is not a legal testbus option\n", 1534 __func__, host->testbus.select_minor); 1535 return false; 1536 } 1537 1538 return true; 1539 } --- As data type of "select_minor" is u8, above check is redundant. This change removes it. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by:
-
Arnd Bergmann authored
When we have turned off RTC support, the smartpqi driver fails to build: ERROR: "rtc_time64_to_tm" [drivers/scsi/smartpqi/smartpqi.ko] undefined! This is easily avoided by using the generic 'struct tm' based helper rather than the RTC specific one. While fixing this, I noticed that even though the driver uses time64_t for storing seconds, it gets them from the old 32-bit struct timeval. To address this, we can simplify the code by calling ktime_get_real_seconds() directly. Fixes: 6c223761 ("smartpqi: initial commit of Microsemi smartpqi driver") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Don Brace <don.brace@microsemi.com> Signed-off-by:
-
Raghava Aditya Renukunta authored
Updated driver version to 50792 Signed-off-by:
Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by:
David Carroll <David.Carroll@microsemi.com> Reviewed-by:
-
Raghava Aditya Renukunta authored
The driver does not unlock the reply queue spin lock after handling SMART adapter events. Instead it might attempt to unlock an already unlocked spin lock. Fixed by making sure the driver locks the spin lock before freeing it. Thank you dan for finding this issue out. Fixes: 6223a39f (scsi: aacraid: Added support for hotplug) Reported-by:
-
Raghava Aditya Renukunta authored
Currently the adapter firmware does not save outstanding I/O's log information when an IOP reset is triggered. This is problematic when trying to root cause and debug issues. Fixed by adding sync command to trigger I/O log file save in the adapter firmware before issuing an IOP reset. Signed-off-by:
-
Raghava Aditya Renukunta authored
The driver currently checks the SELF_TEST_FAILED first and then KERNEL_PANIC next. Under error conditions(boot code failure) both SELF_TEST_FAILED and KERNEL_PANIC can be set at the same time. The driver has the capability to reset the controller on an KERNEL_PANIC, but not on SELF_TEST_FAILED. Fixed by first checking KERNEL_PANIC and then the others. Cc: stable@vger.kernel.org Fixes: e8b12f0f ([SCSI] aacraid: Add new code for PMC-Sierra's SRC base controller family) Signed-off-by:
-
Raghava Aditya Renukunta authored
When the SMART family of controller panic (KERNEL_PANIC) , they do not honor IOP resets. So better to skip it and directly perform a IWBR reset. Signed-off-by:
-
Raghava Aditya Renukunta authored
Currently driver checks the health status of the adapter once every 24 hours. When that happens the driver becomes dependent on the kernel to figure out if the adapter is misbehaving. This might take some time (when the adapter is idle). The driver currently has support to restart/recover the controller when it fails, and decreasing the time interval will help. Fixed by decreasing check interval from 24 hours to 1 minute Signed-off-by:
-
Raghava Aditya Renukunta authored
During the IOP reset stress testing, it was found that the drives can be marked offline when the adapter controller crashes and IO's are running in parallel. When the controller does come back from the reset, the drive that is marked offline is not exposed. Fixed by removing and adding drives that are marked offline. In addition invoke a scsi host bus rescan to capture any additional configuration changes. Signed-off-by:
-
Raghava Aditya Renukunta authored
aac_command_thread checks on the health of controller periodically, using aac_check_health. If the status is an error state KERNEL_PANIC or anything else. The driver will attempt to restart the adapter, but the response is not checked in aac_command_thread. This allows the periodic sync to go thru and lead the driver to a hung state. Fixed by terminating the periodic loop(intended per original design), if the controller is not restored to a healthy state. Cc: stable@vger.kernel.org Fixes: 3d77d840 (scsi: aacraid: Added support for periodic wellness sync) Signed-off-by:
-
Raghava Aditya Renukunta authored
After controller shutdown, all sync fibs time out due to not knowing about the switch to INT-x mode Fixed by replacing aac_src_access_devreg() to aac_set_intx_mode() call. Cc: stable@vger.kernel.org Fixes: 495c0217 (aacraid: MSI-x support) Signed-off-by:
-
Raghava Aditya Renukunta authored
Added support to retrieve driver version from a new sysfs variable called driver_version. It makes it easier for the user to figure out the driver version that is currently running. Signed-off-by:
-
Raghava Aditya Renukunta authored
aac_fib_map_free frees misaligned fib dma memory, additionally it does not free up the whole memory. Fixed by changing the code to free up the correct and full memory allocation. Cc: stable@vger.kernel.org Fixes: e8b12f0f ([SCSI] aacraid: Add new code for PMC-Sierra's SRC based controller family) Signed-off-by:
-
Raghava Aditya Renukunta authored
Arrconf management utility at times sends fibs with AdapterProcessed set in its fibs. This causes the controller to panic and lockup. Fixed by failing the commands that have AdapterProcessed set in its flag. Signed-off-by:
-
Raghava Aditya Renukunta authored
This issue showed up on a kdump debug(single CPU on powerkvm), when EEH errors rendered the adapter unusable. The driver correctly detected the issue and attempted to restart the controller, in doing so the driver attempted to read the status registers of the controller. This triggered additional eeh errors which continued for a good 6 minutes. Fixed by returning without waiting when EEH error is reported. Signed-off-by:
-
Raghava Aditya Renukunta authored
The channel being used for raw srb commands is retrieved from the utility sent fibs and is converted into physical channel id. The driver does not need to to do this since the management utility sends the correct channel id in the first place and in addition the driver sets inaccurate information in the cmd sent to the firmware and gets an invalid response. Fixed by using channel id from srb command. Cc: stable@vger.kernel.org Fixes: 423400e6 ("scsi: aacraid: Include HBA direct interface") Signed-off-by:
-
Raghava Aditya Renukunta authored
Replaced camel case with snake case for init supported options. Suggested-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial driver updates from Greg KH: "Here is the big tty/serial driver patchset for 4.11-rc1. Not much here, but a lot of little fixes and individual serial driver updates all over the subsystem. Majority are for the sh-sci driver and platform (the arch-specific changes have acks from the maintainer). The start of the "serial bus" code is here as well, but nothing is converted to use it yet. That work is still ongoing, hopefully will start to show up across different subsystems for 4.12 (bluetooth is one major place that will be used.) All of these have been in linux-next for a while with no reported issues" * tag 'tty-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (109 commits) tty: pl011: Work around QDF2400 E44 stuck BUSY bit atmel_serial: Use the fractional divider when possible tty: Remove extra include in HVC console tty framework serial: exar: Enable MSI support serial: exar: Move register defines from uapi header to consumer site serial: pci: Remove unused pci_boards entries serial: exar: Move Commtech adapters to 8250_exar as well serial: exar: Fix feature control register constants serial: exar: Fix initialization of EXAR registers for ports > 0 serial: exar: Fix mapping of port I/O resources serial: sh-sci: fix hardware RX trigger level setting tty/serial: atmel: ensure state is restored after suspending serial: 8250_dw: Avoid "too much work" from bogus rx timeout interrupt serdev: ttyport: check whether tty_init_dev() fails serial: 8250_pci: make pciserial_detach_ports() static ARM: dts: STiH410-b2260: Enable HW flow-control ARM: dts: STiH407-family: Use new Pinctrl groups ARM: dts: STiH407-pinctrl: Add Pinctrl group for HW flow-control ARM: dts: STiH410-b2260: Identify the UART RTS line dt-bindings: serial: Update 'uart-has-rtscts' description ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging/iio driver updates from Greg KH: "Here is the big staging and iio driver patchsets for 4.11-rc1. We almost broke even this time around, with only a few thousand lines added overall, as we removed the old and obsolete i4l code, but added some new drivers for the RPi platform, as well as adding some new IIO drivers. All of these have been in linux-next for a while with no reported issues" * tag 'staging-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (669 commits) Staging: vc04_services: Fix the "space prohibited" code style errors Staging: vc04_services: Fix the "wrong indent" code style errors staging: octeon: Use net_device_stats from struct net_device Staging: rtl8192u: ieee80211: ieee80211.h - style fix Staging: rtl8192u: ieee80211: ieee80211_tx.c - style fix Staging: rtl8192u: ieee80211: rtl819x_BAProc.c - style fix Staging: rtl8192u: ieee80211: ieee80211_module.c - style fix Staging: rtl8192u: ieee80211: rtl819x_TSProc.c - style fix Staging: rtl8192u: r8192U.h - style fix Staging: rtl8192u: r8192U_core.c - style fix Staging: rtl8192u: r819xU_cmdpkt.c - style fix staging: rtl8192u: blank lines aren't necessary before a close brace '}' staging: rtl8192u: Adding space after enum and struct definition staging: rtl8192u: Adding space after struct definition Staging: ks7010: Add required and preferred spaces around operators Staging: ks7010: ks*: Remove redundant blank lines Staging: ks7010: ks*: Add missing blank lines after declarations staging: visorbus, replace init_timer with setup_timer staging: vt6656: rxtx.c Removed multiple dereferencing staging: vt6656: Alignment match open parenthesis ...
-
Linus Torvalds authored
Merge tag 'driver-core-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the "small" driver core patches for 4.11-rc1. Not much here, some firmware documentation and self-test updates, a debugfs code formatting issue, and a new feature for call_usermodehelper to make it more robust on systems that want to lock it down in a more secure way. All of these have been linux-next for a while now with no reported issues" * tag 'driver-core-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: kernfs: handle null pointers while printing node name and path Introduce STATIC_USERMODEHELPER to mediate call_usermodehelper() Make static usermode helper binaries constant kmod: make usermodehelper path a const string firmware: revamp firmware documentation selftests: firmware: send expected errors to /dev/null selftests: firmware: only modprobe if driver is missing platform: Print the resource range if device failed to claim kref: prefer atomic_inc_not_zero to atomic_add_unless debugfs: improve formatting of debugfs_real_fops()
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver updates from Greg KH: "Here is the big char/misc driver patchset for 4.11-rc1. Lots of different driver subsystems updated here: rework for the hyperv subsystem to handle new platforms better, mei and w1 and extcon driver updates, as well as a number of other "minor" driver updates. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (169 commits) goldfish: Sanitize the broken interrupt handler x86/platform/goldfish: Prevent unconditional loading vmbus: replace modulus operation with subtraction vmbus: constify parameters where possible vmbus: expose hv_begin/end_read vmbus: remove conditional locking of vmbus_write vmbus: add direct isr callback mode vmbus: change to per channel tasklet vmbus: put related per-cpu variable together vmbus: callback is in softirq not workqueue binder: Add support for file-descriptor arrays binder: Add support for scatter-gather binder: Add extra size to allocator binder: Refactor binder_transact() binder: Support multiple /dev instances binder: Deal with contexts in debugfs binder: Support multiple context managers binder: Split flat_binder_object auxdisplay: ht16k33: remove private workqueue auxdisplay: ht16k33: rework input device initialization ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB/PHY updates from Greg KH: "Here is the big USB and PHY driver updates for 4.11-rc1. Nothing major, just the normal amount of churn in the usb gadget and dwc and xhci controllers, new device ids, new phy drivers, a new usb-serial driver, and a few other minor changes in different USB drivers. All have been in linux-next for a long time with no reported issues" * tag 'usb-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (265 commits) usb: cdc-wdm: remove logically dead code USB: serial: keyspan: drop header file USB: serial: io_edgeport: drop io-tables header file usb: musb: add code comment for clarification usb: misc: add USB251xB/xBi Hi-Speed Hub Controller Driver usb: misc: usbtest: remove redundant check on retval < 0 USB: serial: upd78f0730: sort device ids USB: serial: upd78f0730: add ID for EVAL-ADXL362Z ohci-hub: fix typo in dbg_port macro usb: musb: dsps: Manage CPPI 4.1 DMA interrupt in DSPS usb: musb: tusb6010: Clean up tusb_omap_dma structure usb: musb: cppi_dma: Clean up cppi41_dma_controller structure usb: musb: cppi_dma: Clean up cppi structure usb: musb: cppi41: Detect aborted transfers in cppi41_dma_callback() usb: musb: dma: Add a DMA completion platform callback drivers: usb: usbip: Add missing break statement to switch usb: mtu3: remove redundant dev_err call in get_ssusb_rscs() USB: serial: mos7840: fix another NULL-deref at open USB: serial: console: clean up sanity checks USB: serial: console: fix uninitialised spinlock ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 updates from Will Deacon: - Errata workarounds for Qualcomm's Falkor CPU - Qualcomm L2 Cache PMU driver - Qualcomm SMCCC firmware quirk - Support for DEBUG_VIRTUAL - CPU feature detection for userspace via MRS emulation - Preliminary work for the Statistical Profiling Extension - Misc cleanups and non-critical fixes * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (74 commits) arm64/kprobes: consistently handle MRS/MSR with XZR arm64: cpufeature: correctly handle MRS to XZR arm64: traps: correctly handle MRS/MSR with XZR arm64: ptrace: add XZR-safe regs accessors arm64: include asm/assembler.h in entry-ftrace.S arm64: fix warning about swapper_pg_dir overflow arm64: Work around Falkor erratum 1003 arm64: head.S: Enable EL1 (host) access to SPE when entered at EL2 arm64: arch_timer: document Hisilicon erratum 161010101 arm64: use is_vmalloc_addr arm64: use linux/sizes.h for constants arm64: uaccess: consistently check object sizes perf: add qcom l2 cache perf events driver arm64: remove wrong CONFIG_PROC_SYSCTL ifdef ARM: smccc: Update HVC comment to describe new quirk parameter arm64: do not trace atomic operations ACPI/IORT: Fix the error return code in iort_add_smmu_platform_device() ACPI/IORT: Fix iort_node_get_id() mapping entries indexing arm64: mm: enable CONFIG_HOLES_IN_ZONE for NUMA perf: xgene: Include module.h ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arcLinus Torvalds authored
Pull ARC updates from Vineet Gupta: - Intc imporvements [Yuriy] - VDK platform updates [Alexey] * tag 'arc-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: [plat-*] ARC_HAS_COH_CACHES no longer relevant ARCv2: intc: Delete useless comments in Device Trees ARCv2: IDU-intc: Delete deprecated parameters in Device Trees ARCv2: IDU-intc: mask all common interrupts by default ARCv2: IDU-intc: Use build registers for getting numbers of interrupts ARCv2: intc: Set default priority for all core interrupts ARCv2: intc: Use runtime value of irq count for setting up intc ARCv2: intc: Rework the build time irq count information ARC: [intc-*]: confine NR_CPU_IRQS to intc code ARCv2: intc: Use ARC_REG_STATUS32 for addressing STATUS32 reg arc: vdk: Add support of UIO arc: vdk: Add support of MMC controller arc: vdk: Disable halt on reset
-
