1. 22 Sep, 2015 4 commits
  2. 21 Sep, 2015 10 commits
  3. 18 Sep, 2015 1 commit
  4. 17 Sep, 2015 2 commits
  5. 16 Sep, 2015 1 commit
  6. 15 Sep, 2015 3 commits
    • Nathan Sullivan's avatar
      Documentation: bindings: add doc for zynq USB · c1ceb5ff
      Nathan Sullivan authored
      Document the binding for the zynq specific chipidea UDC binding.
      Signed-off-by: default avatarNathan Sullivan <nathan.sullivan@ni.com>
      Signed-off-by: default avatarPeter Chen <peter.chen@freescale.com>
      c1ceb5ff
    • Nathan Sullivan's avatar
      usb: chipidea: add xilinx zynq platform data · 84bc70f9
      Nathan Sullivan authored
      Due to having hardware tx buffers less than 512 bytes in size, streaming
      must be enabled on the Zynq for the udc to work at all.  Add platform data
      specific to the Zynq udc, which does not set the CI_HDRC_DISABLE_STREAMING
      flag.
      
      Based on a patch by the same name from the Xilinx vendor tree.
      Signed-off-by: default avatarNathan Sullivan <nathan.sullivan@ni.com>
      Signed-off-by: default avatarPeter Chen <peter.chen@freescale.com>
      84bc70f9
    • Peter Chen's avatar
      usb: chipidea: udc: using the correct stall implementation · 56ffa1d1
      Peter Chen authored
      According to spec, there are functional and protocol stalls.
      
      For functional stall, it is for bulk and interrupt endpoints,
      below are cases for it:
      - Host sends SET_FEATURE request for Set-Halt, the udc driver
      needs to set stall, and return true unconditionally.
      - The gadget driver may call usb_ep_set_halt to stall certain
      endpoints, if there is a transfer in pending, the udc driver
      should not set stall, and return -EAGAIN accordingly.
      These two kinds of stall need to be cleared by host using CLEAR_FEATURE
      request (Clear-Halt).
      
      For protocol stall, it is for control endpoint, this stall will
      be set if the control request has failed. This stall will be
      cleared by next setup request (hardware will do it).
      
      It fixed usbtest (drivers/usb/misc/usbtest.c) Test 13 "set/clear halt"
      test failure, meanwhile, this change has been verified by
      USB2 CV Compliance Test and MSC Tests.
      
      Cc: <stable@vger.kernel.org> #3.10+
      Cc: Alan Stern <stern@rowland.harvard.edu>
      Cc: Felipe Balbi <balbi@ti.com>
      Signed-off-by: default avatarPeter Chen <peter.chen@freescale.com>
      56ffa1d1
  7. 14 Sep, 2015 9 commits
  8. 12 Sep, 2015 10 commits
    • Linus Torvalds's avatar
      Linux 4.3-rc1 · 6ff33f39
      Linus Torvalds authored
      6ff33f39
    • Linus Torvalds's avatar
      Merge tag 'cris-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris · 6917b51d
      Linus Torvalds authored
      Pull CRIS updates from Jesper Nilsson:
       "Mostly removal of old cruft of which we can use a generic version, or
        fixes for code not commonly run in the cris port, but also additions
        to enable some good debug"
      
      * tag 'cris-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris: (25 commits)
        CRISv10: delete unused lib/dmacopy.c
        CRISv10: delete unused lib/old_checksum.c
        CRIS: fix switch_mm() lockdep splat
        CRISv32: enable LOCKDEP_SUPPORT
        CRIS: add STACKTRACE_SUPPORT
        CRISv32: annotate irq enable in idle loop
        CRISv32: add support for irqflags tracing
        CRIS: UAPI: use generic types.h
        CRIS: UAPI: use generic shmbuf.h
        CRIS: UAPI: use generic msgbuf.h
        CRIS: UAPI: use generic socket.h
        CRIS: UAPI: use generic sembuf.h
        CRIS: UAPI: use generic sockios.h
        CRIS: UAPI: use generic auxvec.h
        CRIS: UAPI: use generic headers via Kbuild
        CRIS: UAPI: fix elf.h export
        CRIS: don't make asm/elf.h depend on asm/user.h
        CRIS: UAPI: fix ptrace.h
        CRISv32: Squash compile warnings for axisflashmap
        CRISv32: Add GPIO driver to the default configs
        ...
      6917b51d
    • Linus Torvalds's avatar
      blk: rq_data_dir() should not return a boolean · 10fbd36e
      Linus Torvalds authored
      rq_data_dir() returns either READ or WRITE (0 == READ, 1 == WRITE), not
      a boolean value.
      
      Now, admittedly the "!= 0" doesn't really change the value (0 stays as
      zero, 1 stays as one), but it's not only redundant, it confuses gcc, and
      causes gcc to warn about the construct
      
          switch (rq_data_dir(req)) {
              case READ:
                  ...
              case WRITE:
                  ...
      
      that we have in a few drivers.
      
      Now, the gcc warning is silly and stupid (it seems to warn not about the
      switch value having a different type from the case statements, but about
      _any_ boolean switch value), but in this case the code itself is silly
      and stupid too, so let's just change it, and get rid of warnings like
      this:
      
        drivers/block/hd.c: In function ‘hd_request’:
        drivers/block/hd.c:630:11: warning: switch condition has boolean value [-Wswitch-bool]
           switch (rq_data_dir(req)) {
      
      The odd '!= 0' came in when "cmd_flags" got turned into a "u64" in
      commit 5953316d ("block: make rq->cmd_flags be 64-bit") and is
      presumably because the old code (that just did a logical 'and' with 1)
      would then end up making the type of rq_data_dir() be u64 too.
      
      But if we want to retain the old regular integer type, let's just cast
      the result to 'int' rather than use that rather odd '!= 0'.
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      10fbd36e
    • Linus Torvalds's avatar
      Merge branch 'writeback-plugging' · e1df8b0a
      Linus Torvalds authored
      Fix up the writeback plugging introduced in commit d353d758
      ("writeback: plug writeback at a high level") that then caused problems
      due to the unplug happening with a spinlock held.
      
      * writeback-plugging:
        writeback: plug writeback in wb_writeback() and writeback_inodes_wb()
        Revert "writeback: plug writeback at a high level"
      e1df8b0a
    • Linus Torvalds's avatar
      writeback: plug writeback in wb_writeback() and writeback_inodes_wb() · 505a666e
      Linus Torvalds authored
      We had to revert the pluggin in writeback_sb_inodes() because the
      wb->list_lock is held, but we could easily plug at a higher level before
      taking that lock, and unplug after releasing it.  This does that.
      
      Chris will run performance numbers, just to verify that this approach is
      comparable to the alternative (we could just drop and re-take the lock
      around the blk_finish_plug() rather than these two commits.
      
      I'd have preferred waiting for actual performance numbers before picking
      one approach over the other, but I don't want to release rc1 with the
      known "sleeping function called from invalid context" issue, so I'll
      pick this cleanup version for now.  But if the numbers show that we
      really want to plug just at the writeback_sb_inodes() level, and we
      should just play ugly games with the spinlock, we'll switch to that.
      
      Cc: Chris Mason <clm@fb.com>
      Cc: Josef Bacik <jbacik@fb.com>
      Cc: Dave Chinner <david@fromorbit.com>
      Cc: Neil Brown <neilb@suse.de>
      Cc: Jan Kara <jack@suse.cz>
      Cc: Christoph Hellwig <hch@lst.de>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      505a666e
    • Linus Torvalds's avatar
      thermal: fix intel PCH thermal driver mismerge · dfb22fc5
      Linus Torvalds authored
      I didn't notice this when merging the thermal code from Zhang, but his
      merge (commit 5a924a07: "Merge branches 'thermal-core' and
      'thermal-intel' of .git into next") of the thermal-core and
      thermal-intel branches was wrong.
      
      In thermal-core, commit 17e8351a ("thermal: consistently use int for
      temperatures") converted the thermal layer to use "int" for
      temperatures.
      
      But in parallel, in the thermal-intel branch commit d0a12625
      ("thermal: Add Intel PCH thermal driver") added support for the intel
      PCH thermal sensor using the old interfaces that used "unsigned long"
      pointers.
      
      This resulted in warnings like this:
      
        drivers/thermal/intel_pch_thermal.c:184:14: warning: initialization from incompatible pointer type [-Wincompatible-pointer-types]
          .get_temp = pch_thermal_get_temp,
                      ^
        drivers/thermal/intel_pch_thermal.c:184:14: note: (near initialization for ‘tzd_ops.get_temp’)
        drivers/thermal/intel_pch_thermal.c:186:19: warning: initialization from incompatible pointer type [-Wincompatible-pointer-types]
          .get_trip_temp = pch_get_trip_temp,
                           ^
        drivers/thermal/intel_pch_thermal.c:186:19: note: (near initialization for ‘tzd_ops.get_trip_temp’)
      
      This fixes it.
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      dfb22fc5
    • Linus Torvalds's avatar
      Merge branch 'akpm' (patches from Andrew) · 01b0c014
      Linus Torvalds authored
      Merge fourth patch-bomb from Andrew Morton:
      
       - sys_membarier syscall
      
       - seq_file interface changes
      
       - a few misc fixups
      
      * emailed patches from Andrew Morton <akpm@linux-foundation.org>:
        revert "ocfs2/dlm: use list_for_each_entry instead of list_for_each"
        mm/early_ioremap: add explicit #include of asm/early_ioremap.h
        fs/seq_file: convert int seq_vprint/seq_printf/etc... returns to void
        selftests: enhance membarrier syscall test
        selftests: add membarrier syscall test
        sys_membarrier(): system-wide memory barrier (generic, x86)
        MODSIGN: fix a compilation warning in extract-cert
      01b0c014
    • Vineet Gupta's avatar
      ARCv2: [axs103_smp] Reduce clk for SMP FPGA configs · 3ebb0540
      Vineet Gupta authored
      Newer bitfiles needs the reduced clk even for SMP builds
      
      Cc: <stable@vger.kernel.org>  #4.2
      Signed-off-by: default avatarVineet Gupta <vgupta@synopsys.com>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      3ebb0540
    • Linus Torvalds's avatar
      Merge tag 'ntb-4.3' of git://github.com/jonmason/ntb · ded0e250
      Linus Torvalds authored
      Pull NTB fixes from Jon Mason:
       "NTB bug and documentation fixes, new device IDs, performance
        improvements, and adding a mailing list to MAINTAINERS for NTB"
      
      * tag 'ntb-4.3' of git://github.com/jonmason/ntb:
        NTB: Fix range check on memory window index
        NTB: Improve index handling in B2B MW workaround
        NTB: Fix documentation for ntb_peer_db_clear.
        NTB: Fix documentation for ntb_link_is_up
        NTB: Use unique DMA channels for TX and RX
        NTB: Remove dma_sync_wait from ntb_async_rx
        NTB: Clean up QP stats info
        NTB: Make the transport list in order of discovery
        NTB: Add PCI Device IDs for Broadwell Xeon
        NTB: Add flow control to the ntb_netdev
        NTB: Add list to MAINTAINERS
      ded0e250
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input · f0c032d8
      Linus Torvalds authored
      Pull more input updates from Dmitry Torokhov:
       "Second round of updates for the input subsystem.
      
        This introduces two brand new touchscreen drivers (Colibri and
        imx6ul_tsc), some small driver fixes, and we are no longer report
        errors from evdev_flush() as users do not really have a way of
        handling errors, error codes that we were returning were not on the
        list of errors supposed to be returned by close(), and errors were
        causing issues with one of older versions of systemd"
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
        Input: imx_keypad - remove obsolete comment
        Input: touchscreen - add imx6ul_tsc driver support
        Input: Add touchscreen support for Colibri VF50
        Input: i8042 - lower log level for "no controller" message
        Input: evdev - do not report errors form flush()
        Input: elants_i2c - extend the calibration timeout to 12 seconds
        Input: sparcspkr - fix module autoload for OF platform drivers
        Input: regulator-haptic - fix module autoload for OF platform driver
        Input: pwm-beeper - fix module autoload for OF platform driver
        Input: ab8500-ponkey - Fix module autoload for OF platform driver
        Input: cyttsp - remove unnecessary MODULE_ALIAS()
        Input: elan_i2c - add ACPI ID "ELAN1000"
      f0c032d8