- 10 Oct, 2023 2 commits
-
-
Simon Ser authored
The driver might pull connectors which weren't submitted by user-space into the atomic state. For instance, intel_dp_mst_atomic_master_trans_check() pulls in connectors sharing the same DP-MST stream. However, if the connector is unregistered, this later fails with: [ 559.425658] i915 0000:00:02.0: [drm:drm_atomic_helper_check_modeset] [CONNECTOR:378:DP-7] is not registered Skip the unregistered connector check to allow user-space to turn off connectors one-by-one. See this wlroots issue: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3407 Previous discussion: https://lore.kernel.org/intel-gfx/Y6GX7z17WmDSKwta@ideak-desk.fi.intel.com/Signed-off-by:Simon Ser <contact@emersion.fr> Cc: stable@vger.kernel.org Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Lyude Paul <lyude@redhat.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231005131623.114379-1-contact@emersion.fr
-
Ruihai Zhou authored
The sta_himax83102 panel sometimes shows abnormally flickering horizontal lines. The front gate output will precharge the X point of the next pole circuit before TP(TouchPanel Enable) term starts, and wait until the end of the TP term to resume the CLK. For this reason, the X point must be maintained during the TP term. In abnormal case, we measured a slight leakage at point X. This because during the TP term, the GPW does not fully pull the VGL low, causing the TFT to not be closed tightly. To fix this, we completely pull GPW to VGL before entering the TP term. This will ensure that the TFT is closed tightly and prevent the abnormal display. Fixes: 1bc2ef06 ("drm/panel: Support for Starry-himax83102-j02 TDDI MIPI-DSI panel") Signed-off-by:
Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com> Reviewed-by:
Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231007064949.22668-1-zhouruihai@huaqin.corp-partner.google.comSigned-off-by:
-
- 09 Oct, 2023 2 commits
-
-
Zack Rusin authored
Surfaces can be backed (i.e. stored in) memory objects (mob's) which are created and managed by the userspace as GEM buffers. Surfaces grab only a ttm reference which means that the gem object can be deleted underneath us, especially in cases where prime buffer export is used. Make sure that all userspace surfaces which are backed by gem objects hold a gem reference to make sure they're not deleted before vmw surfaces are done with them, which fixes: ------------[ cut here ]------------ refcount_t: underflow; use-after-free. WARNING: CPU: 2 PID: 2632 at lib/refcount.c:28 refcount_warn_saturate+0xfb/0x150 Modules linked in: overlay vsock_loopback vmw_vsock_virtio_transport_common vmw_vsock_vmci_transport vsock snd_ens1371 snd_ac97_codec ac97_bus snd_pcm gameport> CPU: 2 PID: 2632 Comm: vmw_ref_count Not tainted 6.5.0-rc2-vmwgfx #1 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 RIP: 0010:refcount_warn_saturate+0xfb/0x150 Code: eb 9e 0f b6 1d 8b 5b a6 01 80 fb 01 0f 87 ba e4 80 00 83 e3 01 75 89 48 c7 c7 c0 3c f9 a3 c6 05 6f 5b a6 01 01 e8 15 81 98 ff <0f> 0b e9 6f ff ff ff 0f b> RSP: 0018:ffffbdc34344bba0 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000027 RDX: ffff960475ea1548 RSI: 0000000000000001 RDI: ffff960475ea1540 RBP: ffffbdc34344bba8 R08: 0000000000000003 R09: 65646e75203a745f R10: ffffffffa5b32b20 R11: 72657466612d6573 R12: ffff96037d6a6400 R13: ffff9603484805b0 R14: 000000000000000b R15: ffff9603bed06060 FS: 00007f5fd8520c40(0000) GS:ffff960475e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f5fda755000 CR3: 000000010d012005 CR4: 00000000003706e0 Call Trace: <TASK> ? show_regs+0x6e/0x80 ? refcount_warn_saturate+0xfb/0x150 ? __warn+0x91/0x150 ? refcount_warn_saturate+0xfb/0x150 ? report_bug+0x19d/0x1b0 ? handle_bug+0x46/0x80 ? exc_invalid_op+0x1d/0x80 ? asm_exc_invalid_op+0x1f/0x30 ? refcount_warn_saturate+0xfb/0x150 drm_gem_object_handle_put_unlocked+0xba/0x110 [drm] drm_gem_object_release_handle+0x6e/0x80 [drm] drm_gem_handle_delete+0x6a/0xc0 [drm] ? __pfx_vmw_bo_unref_ioctl+0x10/0x10 [vmwgfx] vmw_bo_unref_ioctl+0x33/0x40 [vmwgfx] drm_ioctl_kernel+0xbc/0x160 [drm] drm_ioctl+0x2d2/0x580 [drm] ? __pfx_vmw_bo_unref_ioctl+0x10/0x10 [vmwgfx] ? do_vmi_munmap+0xee/0x180 vmw_generic_ioctl+0xbd/0x180 [vmwgfx] vmw_unlocked_ioctl+0x19/0x20 [vmwgfx] __x64_sys_ioctl+0x99/0xd0 do_syscall_64+0x5d/0x90 ? syscall_exit_to_user_mode+0x2a/0x50 ? do_syscall_64+0x6d/0x90 ? handle_mm_fault+0x16e/0x2f0 ? exit_to_user_mode_prepare+0x34/0x170 ? irqentry_exit_to_user_mode+0xd/0x20 ? irqentry_exit+0x3f/0x50 ? exc_page_fault+0x8e/0x190 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 RIP: 0033:0x7f5fda51aaff Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <41> 89 c0 3d 00 f0 ff ff 7> RSP: 002b:00007ffd536a4d30 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffd536a4de0 RCX: 00007f5fda51aaff RDX: 00007ffd536a4de0 RSI: 0000000040086442 RDI: 0000000000000003 RBP: 0000000040086442 R08: 000055fa603ada50 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000246 R12: 00007ffd536a51b8 R13: 0000000000000003 R14: 000055fa5ebb4c80 R15: 00007f5fda90f040 </TASK> ---[ end trace 0000000000000000 ]--- A lot of the analyis on the bug was done by Murray McAllister and Ian Forbes. Reported-by:
Murray McAllister <murray.mcallister@gmail.com> Cc: Ian Forbes <iforbes@vmware.com> Signed-off-by:
Zack Rusin <zackr@vmware.com> Fixes: a950b989 ("drm/vmwgfx: Do not drop the reference to the handle too soon") Cc: <stable@vger.kernel.org> # v6.2+ Reviewed-by:
Martin Krastev <krastevm@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230928041355.737635-1-zack@kde.org
-
Konstantin Meskhidze authored
Since size of 'header' pointer and '*header' structure is equal on 64-bit machines issue probably didn't cause any wrong behavior. But anyway, fixing typo is required. Fixes: 7a73ba74 ("drm/vmwgfx: Use TTM handles instead of SIDs as user-space surface handles.") Co-developed-by:
Ivanov Mikhail <ivanov.mikhail1@huawei-partners.com> Signed-off-by:
Konstantin Meskhidze <konstantin.meskhidze@huawei.com> Reviewed-by:
-
- 05 Oct, 2023 1 commit
-
-
Christian König authored
When a fence signals there is a very small race window where the timestamp isn't updated yet. sync_file solves this by busy waiting for the timestamp to appear, but on other ocassions didn't handled this correctly. Provide a dma_fence_timestamp() helper function for this and use it in all appropriate cases. Another alternative would be to grab the spinlock when that happens. v2 by teddy: add a wait parameter to wait for the timestamp to show up, in case the accurate timestamp is needed and/or the timestamp is not based on ktime (e.g. hw timestamp) v3 chk: drop the parameter again for unified handling Signed-off-by:
Yunxiang Li <Yunxiang.Li@amd.com> Signed-off-by:
Christian König <christian.koenig@amd.com> Fixes: 1774baa6 ("drm/scheduler: Change scheduled fence track v2") Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> CC: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20230929104725.2358-1-christian.koenig@amd.com
-
- 03 Oct, 2023 4 commits
-
-
Danilo Krummrich authored
Report the maximum number of IBs that can be pushed with a single DRM_IOCTL_NOUVEAU_EXEC through DRM_IOCTL_NOUVEAU_GETPARAM. While the maximum number of IBs per ring might vary between chipsets, the kernel will make sure that userspace can only push a fraction of the maximum number of IBs per ring per job, such that we avoid a situation where there's only a single job occupying the ring, which could potentially lead to the ring run dry. Using DRM_IOCTL_NOUVEAU_GETPARAM to report the maximum number of IBs that can be pushed with a single DRM_IOCTL_NOUVEAU_EXEC implies that all channels of a given device have the same ring size. Reviewed-by:
Dave Airlie <airlied@redhat.com> Reviewed-by:
Faith Ekstrand <faith.ekstrand@collabora.com> Signed-off-by:
Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231002135008.10651-3-dakr@redhat.com
-
Danilo Krummrich authored
Use channel class definitions instead of magic numbers. Reviewed-by:
-
Danilo Krummrich authored
Use actual struct nvif_mclass instead of identical anonymous struct. Reviewed-by:
-
Kai Uwe Broulik authored
The One Mix 2S is a mini laptop with a 1200x1920 portrait screen mounted in a landscape oriented clamshell case. Because of the too generic DMI strings this entry is also doing bios-date matching. Signed-off-by:
Kai Uwe Broulik <foss-linux@broulik.de> Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231001114710.336172-1-foss-linux@broulik.de
-
- 30 Sep, 2023 1 commit
-
-
Arthur Grillo authored
The kunit_action_platform_driver_unregister is added with &fake_platform_driver as ctx, but the kunit_release_action is called pdev as ctx. Fix that by replacing it with &fake_platform_driver. Fixes: 4f2b0b58 ("drm/tests: helpers: Switch to kunit actions") Signed-off-by:
Arthur Grillo <arthurgrillo@riseup.net> Reviewed-by:
Maíra Canal <mairacanal@riseup.net> Acked-by:
Maxime Ripard <mripard@kernel.org> Signed-off-by:
-
- 27 Sep, 2023 6 commits
-
-
Karol Wachowski authored
Create buffers with cache coherency on the CPU side (write-back) while disabling snooping on the VPU side. These buffers require an explicit cache flush after each CPU-side modification. Configuring pages as write-combined may introduce significant delays, potentially taking hundreds of milliseconds for 64 MB buffers. Added internal DRM_IVPU_BO_NOSNOOP mask which disables snooping on the VPU side. Allocate FW runtime memory buffer (64 MB) as cached with snooping-disabled. This fixes random long FW loading times and boot params memory corruption on warmboot (due to missed wmb). Fixes: 02d5b0aa ("accel/ivpu: Implement firmware parsing and booting") Signed-off-by:
Karol Wachowski <karol.wachowski@linux.intel.com> Reviewed-by:
Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by:
Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by:
-
Karol Wachowski authored
Move sequence of masking and unmasking global interrupts from buttress interrupt handler to generic one that handles both VPUIP and BTRS interrupts. Unmasking global interrupts will re-trigger MSI for any pending interrupts. Lack of this sequence can randomly cause to miss any VPUIP interrupt that comes after reading VPU_40XX_HOST_SS_ICB_STATUS_0 and before clearing all active interrupt sources. Fixes: 79cdc56c ("accel/ivpu: Add initial support for VPU 4") Signed-off-by:
-
Karol Wachowski authored
Do not enable frequency change interrupt on 40xx as it might lead to an interrupt storm in current design. FREQ_CHANGE interrupt is triggered on D0I2 entry which will cause KMD to check VPU interrupt sources by reading VPUIP registers. Access to those registers will toggle necessary clocks and trigger another FREQ_CHANGE interrupt possibly ending in an infinite loop. FREQ_CHANGE interrupt has only debug purposes and can be permanently disabled. Fixes: 79cdc56c ("accel/ivpu: Add initial support for VPU 4") Signed-off-by:
-
Karol Wachowski authored
We need to wait for the CLOCK_RESOURCE_OWN_ACK bit to be set after configuring the workpoint. This step ensures that the VPU microcontroller clock is actively toggling and ready for operation. Previously, we relied solely on the READY bit in the VPU_STATUS register, which indicated the completion of the workpoint download. However, this approach was insufficient, as the READY bit could be set while the device was still running on a sideband clock until the PLL locked. To guarantee that the PLL is locked and the device is running on the main clock source, we now wait for the CLOCK_RESOURCE_OWN_ACK before proceeding with the remainder of the power-up sequence. Fixes: 79cdc56c ("accel/ivpu: Add initial support for VPU 4") Signed-off-by:
-
Jacek Lawrynowicz authored
Use ivpu_dbg() to print the VPU ready message so it doesn't pollute the dmesg. Signed-off-by:
Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by:
-
Stanislaw Gruszka authored
If we receive signal when waiting for IPC message response in ivpu_ipc_receive() we return error and continue to operate. Then the driver can send another IPC messages and re-use occupied slot of the message still processed by the firmware. This can result in corrupting firmware memory and following FW crash with messages: [ 3698.569719] intel_vpu 0000:00:0b.0: [drm] ivpu_ipc_send_receive_internal(): IPC receive failed: type 0x1103, ret -512 [ 3698.569747] intel_vpu 0000:00:0b.0: [drm] ivpu_jsm_unregister_db(): Failed to unregister doorbell 3: -512 [ 3698.569756] intel_vpu 0000:00:0b.0: [drm] ivpu_ipc_tx_prepare(): IPC message vpu:0x88980000 not released by firmware [ 3698.569763] intel_vpu 0000:00:0b.0: [drm] ivpu_ipc_tx_prepare(): JSM message vpu:0x88980040 not released by firmware [ 3698.570234] intel_vpu 0000:00:0b.0: [drm] ivpu_ipc_send_receive_internal(): IPC receive failed: type 0x110e, ret -512 [ 3698.570318] intel_vpu 0000:00:0b.0: [drm] *ERROR* ivpu_mmu_dump_event(): MMU EVTQ: 0x10 (Translation fault) SSID: 0 SID: 3, e[2] 00000000, e[3] 00000208, in addr: 0x88988000, fetch addr: 0x0 To fix the issue don't use interruptible variant of wait event to allow firmware to finish IPC processing. Fixes: 5d7422cf ("accel/ivpu: Add IPC driver and JSM messages") Reviewed-by:
-
- 25 Sep, 2023 1 commit
-
-
Stanislaw Gruszka authored
Enable VPU on Arrow Lake CPUs. Reviewed-by:
Krystian Pradzynski <krystian.pradzynski@linux.intel.com> Reviewed-by:
-
- 21 Sep, 2023 1 commit
-
-
Thomas Zimmermann authored
Fix linker error if FB=m about missing fb_io_read and fb_io_write. The linker's error message suggests that this config setting has already been broken for other symbols. All errors (new ones prefixed by >>): sh4-linux-ld: drivers/video/fbdev/sh7760fb.o: in function `sh7760fb_probe': sh7760fb.c:(.text+0x374): undefined reference to `framebuffer_alloc' sh4-linux-ld: sh7760fb.c:(.text+0x394): undefined reference to `fb_videomode_to_var' sh4-linux-ld: sh7760fb.c:(.text+0x39c): undefined reference to `fb_alloc_cmap' sh4-linux-ld: sh7760fb.c:(.text+0x3a4): undefined reference to `register_framebuffer' sh4-linux-ld: sh7760fb.c:(.text+0x3ac): undefined reference to `fb_dealloc_cmap' sh4-linux-ld: sh7760fb.c:(.text+0x434): undefined reference to `framebuffer_release' sh4-linux-ld: drivers/video/fbdev/sh7760fb.o: in function `sh7760fb_remove': sh7760fb.c:(.text+0x800): undefined reference to `unregister_framebuffer' sh4-linux-ld: sh7760fb.c:(.text+0x804): undefined reference to `fb_dealloc_cmap' sh4-linux-ld: sh7760fb.c:(.text+0x814): undefined reference to `framebuffer_release' >> sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0xc): undefined reference to `fb_io_read' >> sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0x10): undefined reference to `fb_io_write' sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0x2c): undefined reference to `cfb_fillrect' sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0x30): undefined reference to `cfb_copyarea' sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0x34): undefined reference to `cfb_imageblit' Suggested-by:Randy Dunlap <rdunlap@infradead.org> Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202309130632.LS04CPWu-lkp@intel.com/Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
Javier Martinez Canillas <javierm@redhat.com> Acked-by:
John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230918090400.13264-1-tzimmermann@suse.de
-
- 20 Sep, 2023 3 commits
-
-
José Pekkarinen authored
The removed line prevents the following cleanup function to execute a dma_fence_put on the out_fence to free its memory, producing the following output in kmemleak: unreferenced object 0xffff888126d8ee00 (size 128): comm "kwin_wayland", pid 981, jiffies 4295380296 (age 390.060s) hex dump (first 32 bytes): c8 a1 c2 27 81 88 ff ff e0 14 a9 c0 ff ff ff ff ...'............ 30 1a e1 2e a6 00 00 00 28 fc 5b 17 81 88 ff ff 0.......(.[..... backtrace: [<0000000011655661>] kmalloc_trace+0x26/0xa0 [<0000000055f15b82>] virtio_gpu_fence_alloc+0x47/0xc0 [virtio_gpu] [<00000000fa6d96f9>] virtio_gpu_execbuffer_ioctl+0x1a8/0x800 [virtio_gpu] [<00000000e6cb5105>] drm_ioctl_kernel+0x169/0x240 [drm] [<000000005ad33e27>] drm_ioctl+0x399/0x6b0 [drm] [<00000000a19dbf65>] __x64_sys_ioctl+0xc5/0x100 [<0000000011fa801e>] do_syscall_64+0x5b/0xc0 [<0000000065c76d8a>] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 unreferenced object 0xffff888121930500 (size 128): comm "kwin_wayland", pid 981, jiffies 4295380313 (age 390.096s) hex dump (first 32 bytes): c8 a1 c2 27 81 88 ff ff e0 14 a9 c0 ff ff ff ff ...'............ f9 ec d7 2f a6 00 00 00 28 fc 5b 17 81 88 ff ff .../....(.[..... backtrace: [<0000000011655661>] kmalloc_trace+0x26/0xa0 [<0000000055f15b82>] virtio_gpu_fence_alloc+0x47/0xc0 [virtio_gpu] [<00000000fa6d96f9>] virtio_gpu_execbuffer_ioctl+0x1a8/0x800 [virtio_gpu] [<00000000e6cb5105>] drm_ioctl_kernel+0x169/0x240 [drm] [<000000005ad33e27>] drm_ioctl+0x399/0x6b0 [drm] [<00000000a19dbf65>] __x64_sys_ioctl+0xc5/0x100 [<0000000011fa801e>] do_syscall_64+0x5b/0xc0 [<0000000065c76d8a>] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [...] This memleak will grow quickly, being possible to see the following line in dmesg after few minutes of life in the virtual machine: [ 706.217388] kmemleak: 10731 new suspected memory leaks (see /sys/kernel/debug/kmemleak) The patch will remove the line to allow the cleanup function do its job. Signed-off-by:José Pekkarinen <jose.pekkarinen@foxhound.fi> Fixes: e4812ab8 ("drm/virtio: Refactor and optimize job submission code path") Signed-off-by:
Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230912060824.5210-1-jose.pekkarinen@foxhound.fi
-
Jani Nikula authored
The EDID returned by drm_bridge_get_edid() needs to be freed. Fixes: 0af5e0b4 ("drm/meson: encoder_hdmi: switch to bridge DRM_BRIDGE_ATTACH_NO_CONNECTOR") Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Neil Armstrong <neil.armstrong@linaro.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: stable@vger.kernel.org # v5.17+ Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
-
Karol Wachowski authored
Buttress spec requires that the interrupt status is cleared at the source first (before clearing MTL_BUTTRESS_INTERRUPT_STAT), that implies that we have to mask out the global interrupt while handling buttress interrupts. Fixes: 79cdc56c ("accel/ivpu: Add initial support for VPU 4") Signed-off-by:
-
- 19 Sep, 2023 4 commits
-
-
Dan Carpenter authored
The u_memcpya() function is supposed to return error pointers on error. Returning NULL will lead to an Oops. Fixes: e3885f71 ("nouveau/u_memcpya: use vmemdup_user") Reviewed-by:
Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by:
-
Dave Airlie authored
I think there are limit checks in place for most things but the new uAPI wants to not have them. Add a limit check and use the vmemdup_user helper instead. Signed-off-by:
-
Danilo Krummrich authored
Always stop and re-start the scheduler in order to let the scheduler free up the timedout job in case it got signaled. In case of exec jobs the job type specific callback will take care to signal all fences and tear down the channel. Fixes: b88baab8 ("drm/nouveau: implement new VM_BIND uAPI") Signed-off-by:
-
Danilo Krummrich authored
Fix the following warning. drivers/gpu/drm/nouveau/nouveau_fence.c:210:45: sparse: sparse: incorrect type in initializer (different address spaces) @@ expected struct nouveau_channel *chan @@ got struct nouveau_channel [noderef] __rcu *channel We're just about to emit the fence, there is nothing to protect against yet, hence it is safe to just cast __rcu away. Reported-by:
-
- 18 Sep, 2023 1 commit
-
-
Arnd Bergmann authored
As a result of the recent Kconfig reworks, the default settings for the framebuffer interfaces changed in unexpected ways: Configurations that leave CONFIG_FB disabled but use DRM now get DRM_FBDEV_EMULATION by default. This also turns on the deprecated /dev/fb device nodes for machines that don't actually want it. In turn, configurations that previously had DRM_FBDEV_EMULATION enabled now only get the /dev/fb front-end but not the more useful framebuffer console, which is not selected any more. We had previously decided that any combination of the three frontends (FB_DEVICE, FRAMEBUFFER_CONSOLE and LOGO) should be selectable, but the new default settings mean that a lot of defconfig files would have to get adapted. Change the defaults back to what they were in Linux 6.5: - Leave DRM_FBDEV_EMULATION turned off unless CONFIG_FB is enabled. Previously this was a hard dependency but now the two are independent. However, configurations that enable CONFIG_FB probably also want to keep the emulation for DRM, while those without FB presumably did that intentionally in the past. - Leave FB_DEVICE turned off for FB=n. Following the same logic, the deprecated option should not automatically get enabled here, most users that had FB turned off in the past do not want it, even if they want the console - Turn the FRAMEBUFFER_CONSOLE option on if DRM_FBDEV_EMULATION is set to avoid having to change defconfig files that relied on it being selected unconditionally in the past. This also makes sense since both LOGO and FB_DEVICE are now disabled by default for builds without CONFIG_FB, but DRM_FBDEV_EMULATION would make no sense if all three are disabled. Fixes: a5ae331e ("drm: Drop select FRAMEBUFFER_CONSOLE for DRM_FBDEV_EMULATION") Fixes: 701d2054 ("fbdev: Make support for userspace interfaces configurable") Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
-
- 15 Sep, 2023 1 commit
-
-
Janusz Krzysztofik authored
While drm_mm test was converted form igt selftest to kunit, unexpected value of "end" argument equal "start" was introduced to one of calls to a function that executes the drm_test_mm_insert_range for specific start/end pair of arguments. As a consequence, DRM_MM_BUG_ON(end <= start) is triggered. Fix it by restoring the original value. Fixes: fc8d29e2 ("drm: selftest: convert drm_mm selftest to KUnit") Signed-off-by:
Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Cc: "Maíra Canal" <mairacanal@riseup.net> Cc: Arthur Grillo <arthurgrillo@riseup.net> Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Daniel Latypov <dlatypov@google.com> Cc: stable@vger.kernel.org # v6.1+ Reviewed-by:
-
- 14 Sep, 2023 2 commits
-
-
Thomas Hellström authored
when using __drm_kunit_helper_alloc_drm_device() the driver may be dereferenced by device-managed resources up until the device is freed, which is typically later than the kunit-managed resource code frees it. Fix this by simply make the driver device-managed as well. In short, the sequence leading to the UAF is as follows: INIT: Code allocates a struct device as a kunit-managed resource. Code allocates a drm driver as a kunit-managed resource. Code allocates a drm device as a device-managed resource. EXIT: Kunit resource cleanup frees the drm driver Kunit resource cleanup puts the struct device, which starts a device-managed resource cleanup device-managed cleanup calls drm_dev_put() drm_dev_put() dereferences the (now freed) drm driver -> Boom. Related KASAN message: [55272.551542] ================================================================== [55272.551551] BUG: KASAN: slab-use-after-free in drm_dev_put.part.0+0xd4/0xe0 [drm] [55272.551603] Read of size 8 at addr ffff888127502828 by task kunit_try_catch/10353 [55272.551612] CPU: 4 PID: 10353 Comm: kunit_try_catch Tainted: G U N 6.5.0-rc7+ #155 [55272.551620] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 0403 01/26/2021 [55272.551626] Call Trace: [55272.551629] <TASK> [55272.551633] dump_stack_lvl+0x57/0x90 [55272.551639] print_report+0xcf/0x630 [55272.551645] ? _raw_spin_lock_irqsave+0x5f/0x70 [55272.551652] ? drm_dev_put.part.0+0xd4/0xe0 [drm] [55272.551694] kasan_report+0xd7/0x110 [55272.551699] ? drm_dev_put.part.0+0xd4/0xe0 [drm] [55272.551742] drm_dev_put.part.0+0xd4/0xe0 [drm] [55272.551783] devres_release_all+0x15d/0x1f0 [55272.551790] ? __pfx_devres_release_all+0x10/0x10 [55272.551797] device_unbind_cleanup+0x16/0x1a0 [55272.551802] device_release_driver_internal+0x3e5/0x540 [55272.551808] ? kobject_put+0x5d/0x4b0 [55272.551814] bus_remove_device+0x1f1/0x3f0 [55272.551819] device_del+0x342/0x910 [55272.551826] ? __pfx_device_del+0x10/0x10 [55272.551830] ? lock_release+0x339/0x5e0 [55272.551836] ? kunit_remove_resource+0x128/0x290 [kunit] [55272.551845] ? __pfx_lock_release+0x10/0x10 [55272.551851] platform_device_del.part.0+0x1f/0x1e0 [55272.551856] ? _raw_spin_unlock_irqrestore+0x30/0x60 [55272.551863] kunit_remove_resource+0x195/0x290 [kunit] [55272.551871] ? _raw_spin_unlock_irqrestore+0x30/0x60 [55272.551877] kunit_cleanup+0x78/0x120 [kunit] [55272.551885] ? __kthread_parkme+0xc1/0x1f0 [55272.551891] ? __pfx_kunit_try_run_case_cleanup+0x10/0x10 [kunit] [55272.551900] ? __pfx_kunit_generic_run_threadfn_adapter+0x10/0x10 [kunit] [55272.551909] kunit_generic_run_threadfn_adapter+0x4a/0x90 [kunit] [55272.551919] kthread+0x2e7/0x3c0 [55272.551924] ? __pfx_kthread+0x10/0x10 [55272.551929] ret_from_fork+0x2d/0x70 [55272.551935] ? __pfx_kthread+0x10/0x10 [55272.551940] ret_from_fork_asm+0x1b/0x30 [55272.551948] </TASK> [55272.551953] Allocated by task 10351: [55272.551956] kasan_save_stack+0x1c/0x40 [55272.551962] kasan_set_track+0x21/0x30 [55272.551966] __kasan_kmalloc+0x8b/0x90 [55272.551970] __kmalloc+0x5e/0x160 [55272.551976] kunit_kmalloc_array+0x1c/0x50 [kunit] [55272.551984] drm_exec_test_init+0xfa/0x2c0 [drm_exec_test] [55272.551991] kunit_try_run_case+0xdd/0x250 [kunit] [55272.551999] kunit_generic_run_threadfn_adapter+0x4a/0x90 [kunit] [55272.552008] kthread+0x2e7/0x3c0 [55272.552012] ret_from_fork+0x2d/0x70 [55272.552017] ret_from_fork_asm+0x1b/0x30 [55272.552024] Freed by task 10353: [55272.552027] kasan_save_stack+0x1c/0x40 [55272.552032] kasan_set_track+0x21/0x30 [55272.552036] kasan_save_free_info+0x27/0x40 [55272.552041] __kasan_slab_free+0x106/0x180 [55272.552046] slab_free_freelist_hook+0xb3/0x160 [55272.552051] __kmem_cache_free+0xb2/0x290 [55272.552056] kunit_remove_resource+0x195/0x290 [kunit] [55272.552064] kunit_cleanup+0x78/0x120 [kunit] [55272.552072] kunit_generic_run_threadfn_adapter+0x4a/0x90 [kunit] [55272.552080] kthread+0x2e7/0x3c0 [55272.552085] ret_from_fork+0x2d/0x70 [55272.552089] ret_from_fork_asm+0x1b/0x30 [55272.552096] The buggy address belongs to the object at ffff888127502800 which belongs to the cache kmalloc-512 of size 512 [55272.552105] The buggy address is located 40 bytes inside of freed 512-byte region [ffff888127502800, ffff888127502a00) [55272.552115] The buggy address belongs to the physical page: [55272.552119] page:00000000af6c70ff refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x127500 [55272.552127] head:00000000af6c70ff order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [55272.552133] anon flags: 0x17ffffc0010200(slab|head|node=0|zone=2|lastcpupid=0x1fffff) [55272.552141] page_type: 0xffffffff() [55272.552145] raw: 0017ffffc0010200 ffff888100042c80 0000000000000000 dead000000000001 [55272.552152] raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000 [55272.552157] page dumped because: kasan: bad access detected [55272.552163] Memory state around the buggy address: [55272.552167] ffff888127502700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [55272.552173] ffff888127502780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [55272.552178] >ffff888127502800: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [55272.552184] ^ [55272.552187] ffff888127502880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [55272.552193] ffff888127502900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [55272.552198] ================================================================== [55272.552203] Disabling lock debugging due to kernel taint v2: - Update commit message, add Fixes: tag and Cc stable. v3: - Further commit message updates (Maxime Ripard). Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Cc: stable@vger.kernel.org # v6.3+ Fixes: d9878031 ("drm/tests: helpers: Allow to pass a custom drm_driver") Signed-off-by:Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by:
Francois Dugast <francois.dugast@intel.com> Acked-by:
-
Maíra Canal authored
This reverts commit a0e6a017. Unlocking a mutex in the context of a hrtimer callback is violating mutex locking rules, as mutex_unlock() from interrupt context is not permitted. Link: https://lore.kernel.org/dri-devel/ZQLAc%2FFwkv%2FGiVoK@phenom.ffwll.local/T/#tAcked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Maíra Canal <mcanal@igalia.com> Signed-off-by:
-
- 12 Sep, 2023 1 commit
-
-
Thomas Zimmermann authored
Forwarding to v6.6-rc1. Signed-off-by:
-
- 11 Sep, 2023 1 commit
-
-
Daniel Vetter authored
Merge tag 'drm-misc-next-fixes-2023-09-11' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Short summary of fixes pull: * nouveau: Lockdep workaround * fbdev/g364fb: Build fix Signed-off-by:
-
- 10 Sep, 2023 6 commits
-
-
Linus Torvalds authored
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm ci scripts from Dave Airlie: "This is a bunch of ci integration for the freedesktop gitlab instance where we currently do upstream userspace testing on diverse sets of GPU hardware. From my perspective I think it's an experiment worth going with and seeing how the benefits/noise playout keeping these files useful. Ideally I'd like to get this so we can do pre-merge testing on PRs eventually. Below is some info from danvet on why we've ended up making the decision and how we can roll it back if we decide it was a bad plan. Why in upstream? - like documentation, testcases, tools CI integration is one of these things where you can waste endless amounts of time if you accidentally have a version that doesn't match your source code - but also like the above, there's a balance, this is the initial cut of what we think makes sense to keep in sync vs out-of-tree, probably needs adjustment - gitlab supports out-of-repo gitlab integration and that's what's been used for the kernel in drm, but it results in per-driver fragmentation and lots of duplicated effort. the simple act of smashing an arbitrary winner into a topic branch already started surfacing patches on dri-devel and sparking good cross driver team discussions Why gitlab? - it's not any more shit than any of the other CI - drm userspace uses it extensively for everything in userspace, we have a lot of people and experience with this, including integration of hw testing labs - media userspace like gstreamer is also on gitlab.fd.o, and there's discussion to extend this to the media subsystem in some fashion Can this be shared? - there's definitely a pile of code that could move to scripts/ if other subsystem adopt ci integration in upstream kernel git. other bits are more drm/gpu specific like the igt-gpu-tests/tools integration - docker images can be run locally or in other CI runners Will we regret this? - it's all in one directory, intentionally, for easy deletion - probably 1-2 years in upstream to see whether this is worth it or a Big Mistake. that's roughly what it took to _really_ roll out solid CI in the bigger userspace projects we have on gitlab.fd.o like mesa3d" * tag 'topic/drm-ci-2023-08-31-1' of git://anongit.freedesktop.org/drm/drm: drm: ci: docs: fix build warning - add missing escape drm: Add initial ci/ subdirectory -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "Fix preemption delays in the SGX code, remove unnecessarily UAPI-exported code, fix a ld.lld linker (in)compatibility quirk and make the x86 SMP init code a bit more conservative to fix kexec() lockups" * tag 'x86-urgent-2023-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sgx: Break up long non-preemptible delays in sgx_vepc_release() x86: Remove the arch_calc_vm_prot_bits() macro from the UAPI x86/build: Fix linker fill bytes quirk/incompatibility for ld.lld x86/smp: Don't send INIT to non-present and non-booted CPUs
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 perf event fix from Ingo Molnar: "Work around a firmware bug in the uncore PMU driver, affecting certain Intel systems" * tag 'perf-urgent-2023-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/uncore: Correct the number of CHAs on EMR
-
Linus Torvalds authored
Merge tag 'perf-tools-for-v6.6-1-2023-09-05' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools Pull perf tools updates from Arnaldo Carvalho de Melo: "perf tools maintainership: - Add git information for perf-tools and perf-tools-next trees and branches to the MAINTAINERS file. That is where development now takes place and myself and Namhyung Kim have write access, more people to come as we emulate other maintainer groups. perf record: - Record kernel data maps when 'perf record --data' is used, so that global variables can be resolved and used in tools that do data profiling. perf trace: - Remove the old, experimental support for BPF events in which a .c file was passed as an event: "perf trace -e hello.c" to then get compiled and loaded. The only known usage for that, that shipped with the kernel as an example for such events, augmented the raw_syscalls tracepoints and was converted to a libbpf skeleton, reusing all the user space components and the BPF code connected to the syscalls. In the end just the way to glue the BPF part and the user space type beautifiers changed, now being performed by libbpf skeletons. The next step is to use BTF to do pretty printing of all syscall types, as discussed with Alan Maguire and others. Now, on a perf built with BUILD_BPF_SKEL=1 we get most if not all path/filenames/strings, some of the networking data structures, perf_event_attr, etc, i.e. systemwide tracing of nanosleep calls and perf_event_open syscalls while 'perf stat' runs 'sleep' for 5 seconds: # perf trace -a -e *nanosleep,perf* perf stat -e cycles,instructions sleep 5 0.000 ( 9.034 ms): perf/327641 perf_event_open(attr_uptr: { type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0 (PERF_COUNT_HW_CPU_CYCLES), sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 327642 (perf), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 3 9.039 ( 0.006 ms): perf/327641 perf_event_open(attr_uptr: { type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0x1 (PERF_COUNT_HW_INSTRUCTIONS), sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 327642 (perf-exec), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 4 ? ( ): gpm/991 ... [continued]: clock_nanosleep()) = 0 10.133 ( ): sleep/327642 clock_nanosleep(rqtp: { .tv_sec: 5, .tv_nsec: 0 }, rmtp: 0x7ffd36f83ed0) ... ? ( ): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0 30.276 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ... 223.215 (1000.430 ms): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) = 0 30.276 (2000.394 ms): gpm/991 ... [continued]: clock_nanosleep()) = 0 1230.814 ( ): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) ... 1230.814 (1000.404 ms): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0 2030.886 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ... 2237.709 (1000.153 ms): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) = 0 ? ( ): crond/1172 ... [continued]: clock_nanosleep()) = 0 3242.699 ( ): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) ... 2030.886 (2000.385 ms): gpm/991 ... [continued]: clock_nanosleep()) = 0 3728.078 ( ): crond/1172 clock_nanosleep(rqtp: { .tv_sec: 60, .tv_nsec: 0 }, rmtp: 0x7ffe0971dcf0) ... 3242.699 (1000.158 ms): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0 4031.409 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ... 10.133 (5000.375 ms): sleep/327642 ... [continued]: clock_nanosleep()) = 0 Performance counter stats for 'sleep 5': 2,617,347 cycles 1,855,997 instructions # 0.71 insn per cycle 5.002282128 seconds time elapsed 0.000855000 seconds user 0.000852000 seconds sys perf annotate: - Building with binutils' libopcode now is opt-in (BUILD_NONDISTRO=1) for licensing reasons, and we missed a build test on tools/perf/tests makefile. Since we now default to NDEBUG=1, we ended up segfaulting when building with BUILD_NONDISTRO=1 because a needed initialization routine was being "error checked" via an assert. Fix it by explicitly checking the result and aborting instead if it fails. We better back propagate the error, but at least 'perf annotate' on samples collected for a BPF program is back working when perf is built with BUILD_NONDISTRO=1. perf report/top: - Add back TUI hierarchy mode header, that is seen when using 'perf report/top --hierarchy'. - Fix the number of entries for 'e' key in the TUI that was preventing navigation of lines when expanding an entry. perf report/script: - Support cross platform register handling, allowing a perf.data file collected on one architecture to have registers sampled correctly displayed when analysis tools such as 'perf report' and 'perf script' are used on a different architecture. - Fix handling of event attributes in pipe mode, i.e. when one uses: perf record -o - | perf report -i - When no perf.data files are used. - Handle files generated via pipe mode with a version of perf and then read also via pipe mode with a different version of perf, where the event attr record may have changed, use the record size field to properly support this version mismatch. perf probe: - Accessing global variables from uprobes isn't supported, make the error message state that instead of stating that some minimal kernel version is needed to have that feature. This seems just a tool limitation, the kernel probably has all that is needed. perf tests: - Fix a reference count related leak in the dlfilter v0 API where the result of a thread__find_symbol_fb() is not matched with an addr_location__exit() to drop the reference counts of the resolved components (machine, thread, map, symbol, etc). Add a dlfilter test to make sure that doesn't regresses. - Lots of fixes for the 'perf test' written in shell script related to problems found with the shellcheck utility. - Fixes for 'perf test' shell scripts testing features enabled when perf is built with BUILD_BPF_SKEL=1, such as 'perf stat' bpf counters. - Add perf record sample filtering test, things like the following example, that gets implemented as a BPF filter attached to the event: # perf record -e task-clock -c 10000 --filter 'ip < 0xffffffff00000000' - Improve the way the task_analyzer test checks if libtraceevent is linked, using 'perf version --build-options' instead of the more expensinve 'perf record -e "sched:sched_switch"'. - Add support for riscv in the mmap-basic test. (This went as well via the RiscV tree, same contents). libperf: - Implement riscv mmap support (This went as well via the RiscV tree, same contents). perf script: - New tool that converts perf.data files to the firefox profiler format so that one can use the visualizer at https://profiler.firefox.com/. Done by Anup Sharma as part of this year's Google Summer of Code. One can generate the output and upload it to the web interface but Anup also automated everything: perf script gecko -F 99 -a sleep 60 - Support syscall name parsing on arm64. - Print "cgroup" field on the same line as "comm". perf bench: - Add new 'uprobe' benchmark to measure the overhead of uprobes with/without BPF programs attached to it. - breakpoints are not available on power9, skip that test. perf stat: - Add #num_cpus_online literal to be used in 'perf stat' metrics, and add this extra 'perf test' check that exemplifies its purpose: TEST_ASSERT_VAL("#num_cpus_online", expr__parse(&num_cpus_online, ctx, "#num_cpus_online") == 0); TEST_ASSERT_VAL("#num_cpus", expr__parse(&num_cpus, ctx, "#num_cpus") == 0); TEST_ASSERT_VAL("#num_cpus >= #num_cpus_online", num_cpus >= num_cpus_online); Miscellaneous: - Improve tool startup time by lazily reading PMU, JSON, sysfs data. - Improve error reporting in the parsing of events, passing YYLTYPE to error routines, so that the output can show were the parsing error was found. - Add 'perf test' entries to check the parsing of events improvements. - Fix various leak for things detected by -fsanitize=address, mostly things that would be freed at tool exit, including: - Free evsel->filter on the destructor. - Allow tools to register a thread->priv destructor and use it in 'perf trace'. - Free evsel->priv in 'perf trace'. - Free string returned by synthesize_perf_probe_point() when the caller fails to do all it needs. - Adjust various compiler options to not consider errors some warnings when building with broken headers found in things like python, flex, bison, as we otherwise build with -Werror. Some for gcc, some for clang, some for some specific version of those, some for some specific version of flex or bison, or some specific combination of these components, bah. - Allow customization of clang options for BPF target, this helps building on gentoo where there are other oddities where BPF targets gets passed some compiler options intended for the native build, so building with WERROR=0 helps while these oddities are fixed. - Dont pass ERR_PTR() values to perf_session__delete() in 'perf top' and 'perf lock', fixing some segfaults when handling some odd failures. - Add LTO build option. - Fix format of unordered lists in the perf docs (tools/perf/Documentation) - Overhaul the bison files, using constructs such as YYNOMEM. - Remove unused tokens from the bison .y files. - Add more comments to various structs. - A few LoongArch enablement patches. Vendor events (JSON): - Add JSON metrics for Yitian 710 DDR (aarch64). Things like: EventName, BriefDescription visible_window_limit_reached_rd, "At least one entry in read queue reaches the visible window limit.", visible_window_limit_reached_wr, "At least one entry in write queue reaches the visible window limit.", op_is_dqsosc_mpc , "A DQS Oscillator MPC command to DRAM.", op_is_dqsosc_mrr , "A DQS Oscillator MRR command to DRAM.", op_is_tcr_mrr , "A Temperature Compensated Refresh(TCR) MRR command to DRAM.", - Add AmpereOne metrics (aarch64). - Update N2 and V2 metrics (aarch64) and events using Arm telemetry repo. - Update scale units and descriptions of common topdown metrics on aarch64. Things like: - "MetricExpr": "stall_slot_frontend / (#slots * cpu_cycles)", - "BriefDescription": "Frontend bound L1 topdown metric", + "MetricExpr": "100 * (stall_slot_frontend / (#slots * cpu_cycles))", + "BriefDescription": "This metric is the percentage of total slots that were stalled due to resource constraints in the frontend of the processor.", - Update events for intel: meteorlake to 1.04, sapphirerapids to 1.15, Icelake+ metric constraints. - Update files for the power10 platform" * tag 'perf-tools-for-v6.6-1-2023-09-05' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (217 commits) perf parse-events: Fix driver config term perf parse-events: Fixes relating to no_value terms perf parse-events: Fix propagation of term's no_value when cloning perf parse-events: Name the two term enums perf list: Don't print Unit for "default_core" perf vendor events intel: Fix modifier in tma_info_system_mem_parallel_reads for skylake perf dlfilter: Avoid leak in v0 API test use of resolve_address() perf metric: Add #num_cpus_online literal perf pmu: Remove str from perf_pmu_alias perf parse-events: Make common term list to strbuf helper perf parse-events: Minor help message improvements perf pmu: Avoid uninitialized use of alias->str perf jevents: Use "default_core" for events with no Unit perf test stat_bpf_counters_cgrp: Enhance perf stat cgroup BPF counter test perf test shell stat_bpf_counters: Fix test on Intel perf test shell record_bpf_filter: Skip 6.2 kernel libperf: Get rid of attr.id field perf tools: Convert to perf_record_header_attr_id() libperf: Add perf_record_header_attr_id() perf tools: Handle old data in PERF_RECORD_ATTR ...
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull smb client fixes from Steve French: - six smb3 client fixes including ones to allow controlling smb3 directory caching timeout and limits, and one debugging improvement - one fix for nls Kconfig (don't need to expose NLS_UCS2_UTILS option) - one minor spnego registry update * tag '6.6-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: spnego: add missing OID to oid registry smb3: fix minor typo in SMB2_GLOBAL_CAP_LARGE_MTU cifs: update internal module version number for cifs.ko smb3: allow controlling maximum number of cached directories smb3: add trace point for queryfs (statfs) nls: Hide new NLS_UCS2_UTILS smb3: allow controlling length of time directory entries are cached with dir leases smb: propagate error code of extract_sharename()
-
- 09 Sep, 2023 3 commits
-
-
David Howells authored
Add some kunit tests for page extraction for ITER_BVEC, ITER_KVEC and ITER_XARRAY type iterators. ITER_UBUF and ITER_IOVEC aren't dealt with as they require userspace VM interaction. ITER_DISCARD isn't dealt with either as that can't be extracted. Signed-off-by:
David Howells <dhowells@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Christian Brauner <brauner@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: David Hildenbrand <david@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
David Howells authored
Add some kunit tests for page extraction for ITER_BVEC, ITER_KVEC and ITER_XARRAY type iterators. ITER_UBUF and ITER_IOVEC aren't dealt with as they require userspace VM interaction. ITER_DISCARD isn't dealt with either as that does nothing. Signed-off-by:
-
David Howells authored
iov_iter_extract_pages() doesn't correctly handle skipping over initial zero-length entries in ITER_KVEC and ITER_BVEC-type iterators. The problem is that it accidentally reduces maxsize to 0 when it skipping and thus runs to the end of the array and returns 0. Fix this by sticking the calculated size-to-copy in a new variable rather than back in maxsize. Fixes: 7d58fe73 ("iov_iter: Add a function to extract a page list from an iterator") Signed-off-by:
Christoph Hellwig <hch@lst.de> Cc: Christian Brauner <brauner@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: David Hildenbrand <david@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Signed-off-by:
-
