- 05 Dec, 2018 23 commits
-
-
Ilya Lesokhin authored
commit ee181e52 upstream. If we fail to enable tls in the kernel we shouldn't override the sk_write_space callback Fixes: 3c4d7559 ('tls: kernel TLS support') Signed-off-by:
Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Ilya Lesokhin authored
commit 196c31b4 upstream. Avoid copying crypto_info again after cipher_type check to avoid a TOCTOU exploits. The temporary array on the stack is removed as we don't really need it Fixes: 3c4d7559 ('tls: kernel TLS support') Signed-off-by:
-
Ilya Lesokhin authored
commit ff45d820 upstream. Previously the TLS ulp context would leak if we attached a TLS ulp to a socket but did not use the TLS_TX setsockopt, or did use it but it failed. This patch solves the issue by overriding prot[TLS_BASE_TX].close and fixing tls_sk_proto_close to work properly when its called with ctx->tx_conf == TLS_BASE_TX. This patch also removes ctx->free_resources as we can use ctx->tx_conf to obtain the relevant information. Fixes: 3c4d7559 ('tls: kernel TLS support') Signed-off-by:
-
Ilya Lesokhin authored
commit 6d88207f upstream. The tx configuration is now stored in ctx->tx_conf. And sk->sk_prot is updated trough a function This will simplify things when we add rx and support for different possible tx and rx cross configurations. Signed-off-by:
-
Alexei Starovoitov authored
commit af86ca4e upstream. Detect code patterns where malicious 'speculative store bypass' can be used and sanitize such patterns. 39: (bf) r3 = r10 40: (07) r3 += -216 41: (79) r8 = *(u64 *)(r7 +0) // slow read 42: (7a) *(u64 *)(r10 -72) = 0 // verifier inserts this instruction 43: (7b) *(u64 *)(r8 +0) = r3 // this store becomes slow due to r8 44: (79) r1 = *(u64 *)(r6 +0) // cpu speculatively executes this load 45: (71) r2 = *(u8 *)(r1 +0) // speculatively arbitrary 'load byte' // is now sanitized Above code after x86 JIT becomes: e5: mov %rbp,%rdx e8: add $0xffffffffffffff28,%rdx ef: mov 0x0(%r13),%r14 f3: movq $0x0,-0x48(%rbp) fb: mov %rdx,0x0(%r14) ff: mov 0x0(%rbx),%rdi 103: movzbq 0x0(%rdi),%rsi Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> [bwh: Backported to 4.14: - Add bpf_verifier_env parameter to check_stack_write() - Look up stack slot_types with state->stack_slot_type[] rather than state->stack[].slot_type[] - Drop bpf_verifier_env argument to verbose() - Adjust context] Signed-off-by:
-
Ilya Dryomov authored
commit cc255c76 upstream. Derive the signature from the entire buffer (both AES cipher blocks) instead of using just the first half of the first block, leaving out data_crc entirely. This addresses CVE-2018-1129. Link: http://tracker.ceph.com/issues/24837Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Reviewed-by:
Sage Weil <sage@redhat.com> Signed-off-by:
-
Ilya Dryomov authored
commit 6daca13d upstream. When a client authenticates with a service, an authorizer is sent with a nonce to the service (ceph_x_authorize_[ab]) and the service responds with a mutation of that nonce (ceph_x_authorize_reply). This lets the client verify the service is who it says it is but it doesn't protect against a replay: someone can trivially capture the exchange and reuse the same authorizer to authenticate themselves. Allow the service to reject an initial authorizer with a random challenge (ceph_x_authorize_challenge). The client then has to respond with an updated authorizer proving they are able to decrypt the service's challenge and that the new authorizer was produced for this specific connection instance. The accepting side requires this challenge and response unconditionally if the client side advertises they have CEPHX_V2 feature bit. This addresses CVE-2018-1128. Link: http://tracker.ceph.com/issues/24836Signed-off-by:
-
Ilya Dryomov authored
commit 149cac4a upstream. Will be used for encrypting both the initial and updated authorizers. Signed-off-by:
-
Ilya Dryomov authored
commit c571fe24 upstream. Will be used for decrypting the server challenge which is only preceded by ceph_x_encrypt_header. Drop struct_v check to allow for extending ceph_x_encrypt_header in the future. Signed-off-by:
-
Ilya Dryomov authored
commit c0f56b48 upstream. Will be used for sending ceph_msg_connect with an updated authorizer, after the server challenges the initial authorizer. Signed-off-by:
-
Ilya Dryomov authored
commit 262614c4 upstream. We already copy authorizer_reply_buf and authorizer_reply_buf_len into ceph_connection. Factoring out __prepare_write_connect() requires two more: authorizer_buf and authorizer_buf_len. Store the pointer to the handshake in con->auth rather than piling on. Signed-off-by:
-
Richard Weinberger authored
commit 25677478 upstream We cannot do it last, otherwithse it will be skipped for dynamic volumes. Reported-by:
Lachmann, Juergen <juergen.lachmann@harman.com> Fixes: 34653fd8 ("ubi: fastmap: Check each mapping only once") Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
-
Matthias Schwarzott authored
[ Upstream commit 910b0797 ] Fix bug by moving the i2c_unregister_device calls after deregistration of dvb frontend. The new style i2c drivers already destroys the frontend object at i2c_unregister_device time. When the dvb frontend is unregistered afterwards it leads to this oops: [ 6058.866459] BUG: unable to handle kernel NULL pointer dereference at 00000000000001f8 [ 6058.866578] IP: dvb_frontend_stop+0x30/0xd0 [dvb_core] [ 6058.866644] PGD 0 [ 6058.866646] P4D 0 [ 6058.866726] Oops: 0000 [#1] SMP [ 6058.866768] Modules linked in: rc_pinnacle_pctv_hd(O) em28xx_rc(O) si2157(O) si2168(O) em28xx_dvb(O) em28xx(O) si2165(O) a8293(O) tda10071(O) tea5767(O) tuner(O) cx23885(O) tda18271(O) videobuf2_dvb(O) videobuf2_dma_sg(O) m88ds3103(O) tveeprom(O) cx2341x(O) v4l2_common(O) dvb_core(O) rc_core(O) videobuf2_memops(O) videobuf2_v4l2(O) videobuf2_core(O) videodev(O) media(O) bluetooth ecdh_generic ums_realtek uas rtl8192cu rtl_usb rtl8192c_common rtlwifi usb_storage snd_hda_codec_realtek snd_hda_codec_hdmi snd_hda_codec_generic i2c_mux snd_hda_intel snd_hda_codec snd_hwdep x86_pkg_temp_thermal snd_hda_core kvm_intel kvm irqbypass [last unloaded: videobuf2_memops] [ 6058.867497] CPU: 2 PID: 7349 Comm: kworker/2:0 Tainted: G W O 4.13.9-gentoo #1 [ 6058.867595] Hardware name: MEDION E2050 2391/H81H3-EM2, BIOS H81EM2W08.308 08/25/2014 [ 6058.867692] Workqueue: usb_hub_wq hub_event [ 6058.867746] task: ffff88011a15e040 task.stack: ffffc90003074000 [ 6058.867825] RIP: 0010:dvb_frontend_stop+0x30/0xd0 [dvb_core] [ 6058.867896] RSP: 0018:ffffc90003077b58 EFLAGS: 00010293 [ 6058.867964] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000010040001f [ 6058.868056] RDX: ffff88011a15e040 RSI: ffffea000464e400 RDI: ffff88001cbe3028 [ 6058.868150] RBP: ffffc90003077b68 R08: ffff880119390380 R09: 000000010040001f [ 6058.868241] R10: ffffc90003077b18 R11: 000000000001e200 R12: ffff88001cbe3028 [ 6058.868330] R13: ffff88001cbe68d0 R14: ffff8800cf734000 R15: ffff8800cf734098 [ 6058.868419] FS: 0000000000000000(0000) GS:ffff88011fb00000(0000) knlGS:0000000000000000 [ 6058.868511] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6058.868578] CR2: 00000000000001f8 CR3: 00000001113c5000 CR4: 00000000001406e0 [ 6058.868662] Call Trace: [ 6058.868705] dvb_unregister_frontend+0x2a/0x80 [dvb_core] [ 6058.868774] em28xx_dvb_fini+0x132/0x220 [em28xx_dvb] [ 6058.868840] em28xx_close_extension+0x34/0x90 [em28xx] [ 6058.868902] em28xx_usb_disconnect+0x4e/0x70 [em28xx] [ 6058.868968] usb_unbind_interface+0x6d/0x260 [ 6058.869025] device_release_driver_internal+0x150/0x210 [ 6058.869094] device_release_driver+0xd/0x10 [ 6058.869150] bus_remove_device+0xe4/0x160 [ 6058.869204] device_del+0x1ce/0x2f0 [ 6058.869253] usb_disable_device+0x99/0x270 [ 6058.869306] usb_disconnect+0x8d/0x260 [ 6058.869359] hub_event+0x93d/0x1520 [ 6058.869408] ? dequeue_task_fair+0xae5/0xd20 [ 6058.869467] process_one_work+0x1d9/0x3e0 [ 6058.869522] worker_thread+0x43/0x3e0 [ 6058.869576] kthread+0x104/0x140 [ 6058.869602] ? trace_event_raw_event_workqueue_work+0x80/0x80 [ 6058.869640] ? kthread_create_on_node+0x40/0x40 [ 6058.869673] ret_from_fork+0x22/0x30 [ 6058.869698] Code: 54 49 89 fc 53 48 8b 9f 18 03 00 00 0f 1f 44 00 00 41 83 bc 24 04 05 00 00 02 74 0c 41 c7 84 24 04 05 00 00 01 00 00 00 0f ae f0 <48> 8b bb f8 01 00 00 48 85 ff 74 5c e8 df 40 f0 e0 48 8b 93 f8 [ 6058.869850] RIP: dvb_frontend_stop+0x30/0xd0 [dvb_core] RSP: ffffc90003077b58 [ 6058.869894] CR2: 00000000000001f8 [ 6058.875880] ---[ end trace 717eecf7193b3fc6 ]--- Signed-off-by:
Matthias Schwarzott <zzam@gentoo.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Hugh Dickins authored
commit 06a5e126 upstream. collapse_shmem()'s VM_BUG_ON_PAGE(PageTransCompound) was unsafe: before it holds page lock of the first page, racing truncation then extension might conceivably have inserted a hugepage there already. Fail with the SCAN_PAGE_COMPOUND result, instead of crashing (CONFIG_DEBUG_VM=y) or otherwise mishandling the unexpected hugepage - though later we might code up a more constructive way of handling it, with SCAN_SUCCESS. Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261529310.2275@eggly.anvils Fixes: f3f0e1d2 ("khugepaged: add support of collapse for tmpfs/shmem pages") Signed-off-by:
Hugh Dickins <hughd@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> [4.8+] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Hugh Dickins authored
commit 87c460a0 upstream. khugepaged's collapse_shmem() does almost all of its work, to assemble the huge new_page from 512 scattered old pages, with the new_page's refcount frozen to 0 (and refcounts of all old pages so far also frozen to 0). Including shmem_getpage() to read in any which were out on swap, memory reclaim if necessary to allocate their intermediate pages, and copying over all the data from old to new. Imagine the frozen refcount as a spinlock held, but without any lock debugging to highlight the abuse: it's not good, and under serious load heads into lockups - speculative getters of the page are not expecting to spin while khugepaged is rescheduled. One can get a little further under load by hacking around elsewhere; but fortunately, freezing the new_page turns out to have been entirely unnecessary, with no hacks needed elsewhere. The huge new_page lock is already held throughout, and guards all its subpages as they are brought one by one into the page cache tree; and anything reading the data in that page, without the lock, before it has been marked PageUptodate, would already be in the wrong. So simply eliminate the freezing of the new_page. Each of the old pages remains frozen with refcount 0 after it has been replaced by a new_page subpage in the page cache tree, until they are all unfrozen on success or failure: just as before. They could be unfrozen sooner, but cause no problem once no longer visible to find_get_entry(), filemap_map_pages() and other speculative lookups. Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261527570.2275@eggly.anvils Fixes: f3f0e1d2 ("khugepaged: add support of collapse for tmpfs/shmem pages") Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> [4.8+] Signed-off-by:
-
Hugh Dickins authored
commit 042a3082 upstream. Several cleanups in collapse_shmem(): most of which probably do not really matter, beyond doing things in a more familiar and reassuring order. Simplify the failure gotos in the main loop, and on success update stats while interrupts still disabled from the last iteration. Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261526400.2275@eggly.anvils Fixes: f3f0e1d2 ("khugepaged: add support of collapse for tmpfs/shmem pages") Signed-off-by:
-
Hugh Dickins authored
commit 2af8ff29 upstream. Huge tmpfs testing reminds us that there is no __GFP_ZERO in the gfp flags khugepaged uses to allocate a huge page - in all common cases it would just be a waste of effort - so collapse_shmem() must remember to clear out any holes that it instantiates. The obvious place to do so, where they are put into the page cache tree, is not a good choice: because interrupts are disabled there. Leave it until further down, once success is assured, where the other pages are copied (before setting PageUptodate). Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261525080.2275@eggly.anvils Fixes: f3f0e1d2 ("khugepaged: add support of collapse for tmpfs/shmem pages") Signed-off-by:
-
Hugh Dickins authored
commit aaa52e34 upstream. Huge tmpfs testing on a shortish file mapped into a pmd-rounded extent hit shmem_evict_inode()'s WARN_ON(inode->i_blocks) followed by clear_inode()'s BUG_ON(inode->i_data.nrpages) when the file was later closed and unlinked. khugepaged's collapse_shmem() was forgetting to update mapping->nrpages on the rollback path, after it had added but then needs to undo some holes. There is indeed an irritating asymmetry between shmem_charge(), whose callers want it to increment nrpages after successfully accounting blocks, and shmem_uncharge(), when __delete_from_page_cache() already decremented nrpages itself: oh well, just add a comment on that to them both. And shmem_recalc_inode() is supposed to be called when the accounting is expected to be in balance (so it can deduce from imbalance that reclaim discarded some pages): so change shmem_charge() to update nrpages earlier (though it's rare for the difference to matter at all). Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261523450.2275@eggly.anvils Fixes: 800d8c63 ("shmem: add huge pages support") Fixes: f3f0e1d2 ("khugepaged: add support of collapse for tmpfs/shmem pages") Signed-off-by:
-
Hugh Dickins authored
commit 701270fa upstream. Huge tmpfs testing showed that although collapse_shmem() recognizes a concurrently truncated or hole-punched page correctly, its handling of holes was liable to refill an emptied extent. Add check to stop that. Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261522040.2275@eggly.anvils Fixes: f3f0e1d2 ("khugepaged: add support of collapse for tmpfs/shmem pages") Signed-off-by:
Matthew Wilcox <willy@infradead.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: <stable@vger.kernel.org> [4.8+] Signed-off-by:
-
Hugh Dickins authored
commit 006d3ff2 upstream. Huge tmpfs testing, on 32-bit kernel with lockdep enabled, showed that __split_huge_page() was using i_size_read() while holding the irq-safe lru_lock and page tree lock, but the 32-bit i_size_read() uses an irq-unsafe seqlock which should not be nested inside them. Instead, read the i_size earlier in split_huge_page_to_list(), and pass the end offset down to __split_huge_page(): all while holding head page lock, which is enough to prevent truncation of that extent before the page tree lock has been taken. Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261520070.2275@eggly.anvils Fixes: baa355fd ("thp: file pages support for split_huge_page()") Signed-off-by:
-
Hugh Dickins authored
commit 173d9d9f upstream. Huge tmpfs stress testing has occasionally hit shmem_undo_range()'s VM_BUG_ON_PAGE(page_to_pgoff(page) != index, page). Move the setting of mapping and index up before the page_ref_unfreeze() in __split_huge_page_tail() to fix this: so that a page cache lookup cannot get a reference while the tail's mapping and index are unstable. In fact, might as well move them up before the smp_wmb(): I don't see an actual need for that, but if I'm missing something, this way round is safer than the other, and no less efficient. You might argue that VM_BUG_ON_PAGE(page_to_pgoff(page) != index, page) is misplaced, and should be left until after the trylock_page(); but left as is has not crashed since, and gives more stringent assurance. Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261516380.2275@eggly.anvils Fixes: e9b61f19 ("thp: reintroduce split_huge_page()") Requires: 605ca5ed ("mm/huge_memory.c: reorder operations in __split_huge_page_tail()") Signed-off-by:
-
Konstantin Khlebnikov authored
commit 605ca5ed upstream. THP split makes non-atomic change of tail page flags. This is almost ok because tail pages are locked and isolated but this breaks recent changes in page locking: non-atomic operation could clear bit PG_waiters. As a result concurrent sequence get_page_unless_zero() -> lock_page() might block forever. Especially if this page was truncated later. Fix is trivial: clone flags before unfreezing page reference counter. This race exists since commit 62906027 ("mm: add PageWaiters indicating tasks are waiting for a page bit") while unsave unfreeze itself was added in commit 8df651c7 ("thp: cleanup split_huge_page()"). clear_compound_head() also must be called before unfreezing page reference because after successful get_page_unless_zero() might follow put_page() which needs correct compound_head(). And replace page_ref_inc()/page_ref_add() with page_ref_unfreeze() which is made especially for that and has semantic of smp_store_release(). Link: http://lkml.kernel.org/r/151844393341.210639.13162088407980624477.stgit@buzzSigned-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by:
-
Hugh Dickins authored
commit 906f9cdf upstream. The term "freeze" is used in several ways in the kernel, and in mm it has the particular meaning of forcing page refcount temporarily to 0. freeze_page() is just too confusing a name for a function that unmaps a page: rename it unmap_page(), and rename unfreeze_page() remap_page(). Went to change the mention of freeze_page() added later in mm/rmap.c, but found it to be incorrect: ordinary page reclaim reaches there too; but the substance of the comment still seems correct, so edit it down. Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261514080.2275@eggly.anvils Fixes: e9b61f19 ("thp: reintroduce split_huge_page()") Signed-off-by:
-
- 01 Dec, 2018 17 commits
-
-
Greg Kroah-Hartman authored
-
Mimi Zohar authored
commit e2598077 upstream. Intermittently security.ima is not being written for new files. This patch re-initializes the new slab iint->atomic_flags field before freeing it. Fixes: commit 0d73a552 ("ima: re-introduce own integrity cache lock") Signed-off-by:
Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by:
James Morris <jmorris@namei.org> Cc: Aditya Kali <adityakali@google.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dmitry Kasatkin authored
commit 0d73a552 upstream. Before IMA appraisal was introduced, IMA was using own integrity cache lock along with i_mutex. process_measurement and ima_file_free took the iint->mutex first and then the i_mutex, while setxattr, chmod and chown took the locks in reverse order. To resolve the potential deadlock, i_mutex was moved to protect entire IMA functionality and the redundant iint->mutex was eliminated. Solution was based on the assumption that filesystem code does not take i_mutex further. But when file is opened with O_DIRECT flag, direct-io implementation takes i_mutex and produces deadlock. Furthermore, certain other filesystem operations, such as llseek, also take i_mutex. More recently some filesystems have replaced their filesystem specific lock with the global i_rwsem to read a file. As a result, when IMA attempts to calculate the file hash, reading the file attempts to take the i_rwsem again. To resolve O_DIRECT related deadlock problem, this patch re-introduces iint->mutex. But to eliminate the original chmod() related deadlock problem, this patch eliminates the requirement for chmod hooks to take the iint->mutex by introducing additional atomic iint->attr_flags to indicate calling of the hooks. The allowed locking order is to take the iint->mutex first and then the i_rwsem. Original flags were cleared in chmod(), setxattr() or removwxattr() hooks and tested when file was closed or opened again. New atomic flags are set or cleared in those hooks and tested to clear iint->flags on close or on open. Atomic flags are following: * IMA_CHANGE_ATTR - indicates that chATTR() was called (chmod, chown, chgrp) and file attributes have changed. On file open, it causes IMA to clear iint->flags to re-evaluate policy and perform IMA functions again. * IMA_CHANGE_XATTR - indicates that setxattr or removexattr was called and extended attributes have changed. On file open, it causes IMA to clear iint->flags IMA_DONE_MASK to re-appraise. * IMA_UPDATE_XATTR - indicates that security.ima needs to be updated. It is cleared if file policy changes and no update is needed. * IMA_DIGSIG - indicates that file security.ima has signature and file security.ima must not update to file has on file close. * IMA_MUST_MEASURE - indicates the file is in the measurement policy. Fixes: Commit 65523218 ("xfs: remove i_iolock and use i_rwsem in the VFS inode instead") Signed-off-by:
Dmitry Kasatkin <dmitry.kasatkin@huawei.com> Signed-off-by:
-
Matthew Garrett authored
commit 50b97748 upstream. The EVM signature includes the inode number and (optionally) the filesystem UUID, making it impractical to ship EVM signatures in packages. This patch adds a new portable format intended to allow distributions to include EVM signatures. It is identical to the existing format but hardcodes the inode and generation numbers to 0 and does not include the filesystem UUID even if the kernel is configured to do so. Removing the inode means that the metadata and signature from one file could be copied to another file without invalidating it. This is avoided by ensuring that an IMA xattr is present during EVM validation. Portable signatures are intended to be immutable - ie, they will never be transformed into HMACs. Based on earlier work by Dmitry Kasatkin and Mikhail Kurinnoi. Signed-off-by:
Matthew Garrett <mjg59@google.com> Cc: Dmitry Kasatkin <dmitry.kasatkin@huawei.com> Cc: Mikhail Kurinnoi <viewizard@viewizard.com> Signed-off-by:
-
Mimi Zohar authored
commit f3cc6b25 upstream. All files matching a "measure" rule must be included in the IMA measurement list, even when the file hash cannot be calculated. Similarly, all files matching an "audit" rule must be audited, even when the file hash can not be calculated. The file data hash field contained in the IMA measurement list template data will contain 0's instead of the actual file hash digest. Note: In general, adding, deleting or in anyway changing which files are included in the IMA measurement list is not a good idea, as it might result in not being able to unseal trusted keys sealed to a specific TPM PCR value. This patch not only adds file measurements that were not previously measured, but specifies that the file hash value for these files will be 0's. As the IMA measurement list ordering is not consistent from one boot to the next, it is unlikely that anyone is sealing keys based on the IMA measurement list. Remote attestation servers should be able to process these new measurement records, but might complain about these unknown records. Signed-off-by:
-
Alexander Aring authored
commit f18fa5de upstream. This patch initialize stack variables which are used in frag_lowpan_compare_key to zero. In my case there are padding bytes in the structures ieee802154_addr as well in frag_lowpan_compare_key. Otherwise the key variable contains random bytes. The result is that a compare of two keys by memcmp works incorrect. Fixes: 648700f7 ("inet: frags: use rhashtables for reassembly units") Signed-off-by:
Alexander Aring <aring@mojatatu.com> Reported-by:
Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by:
-
Paul E. McKenney authored
commit 92aa39e9 upstream. The per-CPU rcu_dynticks.rcu_urgent_qs variable communicates an urgent need for an RCU quiescent state from the force-quiescent-state processing within the grace-period kthread to context switches and to cond_resched(). Unfortunately, such urgent needs are not communicated to need_resched(), which is sometimes used to decide when to invoke cond_resched(), for but one example, within the KVM vcpu_run() function. As of v4.15, this can result in synchronize_sched() being delayed by up to ten seconds, which can be problematic, to say nothing of annoying. This commit therefore checks rcu_dynticks.rcu_urgent_qs from within rcu_check_callbacks(), which is invoked from the scheduling-clock interrupt handler. If the current task is not an idle task and is not executing in usermode, a context switch is forced, and either way, the rcu_dynticks.rcu_urgent_qs variable is set to false. If the current task is an idle task, then RCU's dyntick-idle code will detect the quiescent state, so no further action is required. Similarly, if the task is executing in usermode, other code in rcu_check_callbacks() and its called functions will report the corresponding quiescent state. Reported-by:
Marius Hillenbrand <mhillenb@amazon.de> Reported-by:
David Woodhouse <dwmw2@infradead.org> Suggested-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> [ paulmck: Backported to make patch apply cleanly on older versions. ] Tested-by:
-
Janosch Frank authored
commit 1843abd0 upstream. Userspace could have munmapped the area before doing unmapping from the gmap. This would leave us with a valid vmaddr, but an invalid vma from which we would try to zap memory. Let's check before using the vma. Fixes: 1e133ab2 ("s390/mm: split arch/s390/mm/pgtable.c") Signed-off-by:
Janosch Frank <frankja@linux.ibm.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Message-Id: <20180816082432.78828-1-frankja@linux.ibm.com> Signed-off-by:
-
Phil Elwell authored
commit 760db29b upstream. There is a standard mechanism for locating and using a MAC address from the Device Tree. Use this facility in the lan78xx driver to support applications without programmed EEPROM or OTP. At the same time, regularise the handling of the different address sources. Signed-off-by:
Phil Elwell <phil@raspberrypi.org> Signed-off-by:
Paolo Pisati <p.pisati@gmail.com> Signed-off-by:
-
Salvatore Mesoraca authored
commit 30aba665 upstream. Disallows open of FIFOs or regular files not owned by the user in world writable sticky directories, unless the owner is the same as that of the directory or the file is opened without the O_CREAT flag. The purpose is to make data spoofing attacks harder. This protection can be turned on and off separately for FIFOs and regular files via sysctl, just like the symlinks/hardlinks protection. This patch is based on Openwall's "HARDEN_FIFO" feature by Solar Designer. This is a brief list of old vulnerabilities that could have been prevented by this feature, some of them even allow for privilege escalation: CVE-2000-1134 CVE-2007-3852 CVE-2008-0525 CVE-2009-0416 CVE-2011-4834 CVE-2015-1838 CVE-2015-7442 CVE-2016-7489 This list is not meant to be complete. It's difficult to track down all vulnerabilities of this kind because they were often reported without any mention of this particular attack vector. In fact, before hardlinks/symlinks restrictions, fifos/regular files weren't the favorite vehicle to exploit them. [s.mesoraca16@gmail.com: fix bug reported by Dan Carpenter] Link: https://lkml.kernel.org/r/20180426081456.GA7060@mwanda Link: http://lkml.kernel.org/r/1524829819-11275-1-git-send-email-s.mesoraca16@gmail.com [keescook@chromium.org: drop pr_warn_ratelimited() in favor of audit changes in the future] [keescook@chromium.org: adjust commit subjet] Link: http://lkml.kernel.org/r/20180416175918.GA13494@beastSigned-off-by:
Salvatore Mesoraca <s.mesoraca16@gmail.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Suggested-by:
Solar Designer <solar@openwall.com> Suggested-by:
-
Aaron Ma authored
commit 958c0bd8 upstream. Realtek USB3.0 Card Reader [0bda:0328] reports wrong port status on Cannon lake PCH USB3.1 xHCI [8086:a36d] after resume from S3, after clear port reset it works fine. Since this device is registered on USB3 roothub at boot, when port status reports not superspeed, xhci_get_port_status will call an uninitialized completion in bus_state[0]. Kernel will hang because of NULL pointer. Restrict the USB2 resume status check in USB2 roothub to fix hang issue. Cc: stable@vger.kernel.org Signed-off-by:
Aaron Ma <aaron.ma@canonical.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Greg Kroah-Hartman authored
commit b97b3d9f upstream. If we are not echoing the data to userspace or the console is in icanon mode, then perhaps it is a "secret" so we should wipe it once we are done with it. This mirrors the logic that the audit code has. Reported-by:
aszlig <aszlig@nix.build> Tested-by:
Milan Broz <gmazyland@gmail.com> Tested-by:
Daniel Zatovic <daniel.zatovic@gmail.com> Tested-by:
-
Linus Torvalds authored
commit c9a8e5fc upstream. After we are done with the tty buffer, zero it out. Reported-by:
-
Sebastien Boisvert authored
commit 4d54954a upstream. Tracing the event "fs_dax:dax_pmd_insert_mapping" with perf produces this warning: [fs_dax:dax_pmd_insert_mapping] unknown op '~' It is printed in process_op (tools/lib/traceevent/event-parse.c) because '~' is parsed as a binary operator. perf reads the format of fs_dax:dax_pmd_insert_mapping ("print fmt") from /sys/kernel/debug/tracing/events/fs_dax/dax_pmd_insert_mapping/format . The format contains: ~(((u64) ~(~(((1UL) << 12)-1))) ^ \ interpreted as a binary operator by process_op(). This part is generated in the declaration of the event class dax_pmd_insert_mapping_class in include/trace/events/fs_dax.h : __print_flags_u64(__entry->pfn_val & PFN_FLAGS_MASK, "|", PFN_FLAGS_TRACE), This patch adds a pair of parentheses in the declaration of PFN_FLAGS_MASK to make sure that '~' is parsed as a unary operator by perf. The part of the format that was problematic is now: ~(((u64) (~(~(((1UL) << 12)-1)))) Now, all the '~' are parsed as unary operators. Link: http://lkml.kernel.org/r/20181021145939.8760-1-sebhtml@videotron.qc.caSigned-off-by:
Sebastien Boisvert <sebhtml@videotron.qc.ca> Acked-by:
Dan Williams <dan.j.williams@intel.com> Cc: "Steven Rostedt (VMware)" <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: "Tzvetomir Stoyanov (VMware)" <tz.stoyanov@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Ross Zwisler <zwisler@kernel.org> Cc: Elenie Godzaridis <arangradient@gmail.com> Cc: <stable@vger.kerenl.org> Signed-off-by:
-
Jeffy Chen authored
commit 2ec16150 upstream. The current ordering of code in device_del() triggers a WARN_ON() in device_links_purge(), because of an unexpected link status. The device_links_unbind_consumers() call in device_release_driver() has to take place before device_links_purge() for the status of all links to be correct, so move the device_links_purge() call in device_del() after the invocation of bus_remove_device() which calls device_release_driver(). Fixes: 9ed98953 (driver core: Functional dependencies tracking support) Signed-off-by:
Jeffy Chen <jeffy.chen@rock-chips.com> Reviewed-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Krzysztof Kozlowski authored
commit 70c3250a upstream. After moving all nodes under "soc" node in commit 5d99cc59 ("ARM: dts: exynos: Move Exynos5250 and Exynos5420 nodes under soc"), the i2c20 alias in Peach Pit and Peach Pi stopped pointing to proper node: arch/arm/boot/dts/exynos5420-peach-pit.dtb: Warning (alias_paths): /aliases:i2c20: aliases property is not a valid node (/spi@12d40000/cros-ec@0/i2c-tunnel) arch/arm/boot/dts/exynos5800-peach-pi.dtb: Warning (alias_paths): /aliases:i2c20: aliases property is not a valid node (/spi@12d40000/cros-ec@0/i2c-tunnel) Fixes: 5d99cc59 ("ARM: dts: exynos: Move Exynos5250 and Exynos5420 nodes under soc") Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Marek Szyprowski authored
commit 5b23fcee upstream. FIMC LITE SYSMMU devices are defined in exynos5250.dtsi, but clocks for them are not instantiated by Exynos5250 clock provider driver. Add needed definitions for those clocks to fix IOMMU probe failure: ERROR: could not get clock /soc/sysmmu@13c40000:sysmmu(0) exynos-sysmmu 13c40000.sysmmu: Failed to get device clock(s)! exynos-sysmmu: probe of 13c40000.sysmmu failed with error -38 ERROR: could not get clock /soc/sysmmu@13c50000:sysmmu(0) exynos-sysmmu 13c50000.sysmmu: Failed to get device clock(s)! exynos-sysmmu: probe of 13c50000.sysmmu failed with error -38 Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Fixes: bfed1074 ("clk: exynos5250: Add missing sysmmu clocks for DISP and ISP blocks") Acked-by:
Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
