- 20 Apr, 2016 37 commits
-
-
Greg Kroah-Hartman authored
-
Greg Kroah-Hartman authored
commit e5bdfd50 upstream. This reverts commit d8f00cd6. Tony writes: This upstream commit is causing an oops: d8f00cd6 ("usb: hub: do not clear BOS field during reset device") This patch has already been included in several -stable kernels. Here are the affected kernels: 4.5.0-rc4 (current git) 4.4.2 4.3.6 (currently in review) 4.1.18 3.18.27 3.14.61 How to reproduce the problem: Boot kernel with slub debugging enabled (otherwise memory corruption will cause random oopses later instead of immediately) Plug in USB 3.0 disk to xhci USB 3.0 port dd if=/dev/sdc of=/dev/null bs=65536 (where /dev/sdc is the USB 3.0 disk) Unplug USB cable while dd is still going Oops is immediate: Reported-by:
Tony Battersby <tonyb@cybernetics.com> Cc: Du, Changbin <changbin.du@intel.com> Cc: Roger Quadros <rogerq@ti.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vladis Dronov authored
commit fa52bd50 upstream. The usbvision driver crashes when a specially crafted usb device with invalid number of interfaces or endpoints is detected. This fix adds checks that the device has proper configuration expected by the driver. Reported-by:
Ralf Spenneberg <ralf@spenneberg.net> Signed-off-by:
Vladis Dronov <vdronov@redhat.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Alexey Khoroshilov authored
commit afd270d1 upstream. There is no usb_put_dev() on failure paths in usbvision_probe(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Nicolai Hähnle authored
[Backport of upstream commit f6ff4f67, with an additional NULL pointer guard that is required for kernels 3.17 and older. To be precise, any kernel that does *not* have commit 954605ca "drm/radeon: use common fence implementation for fences, v4" requires this additional NULL pointer guard.] An arbitrary amount of time can pass between spin_unlock and radeon_fence_wait_any, so we need to ensure that nobody frees the fences from under us. Based on the analogous fix for amdgpu. Signed-off-by:
Nicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> (v1 + fix) Tested-by:
Lutz Euler <lutz.euler@freenet.de> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit 50353e6f, which is commit f6ff4f67 upstream, as it was backported to the 3.14-stable tree incorrectly. A correct fix will happen next. Reported-by:
-
Alan Stern authored
commit 972e6a99 upstream. The usbhid driver has inconsistently duplicated code in its post-reset, resume, and reset-resume pathways. reset-resume doesn't check HID_STARTED before trying to restart the I/O queues. resume fails to clear the HID_SUSPENDED flag if HID_STARTED isn't set. resume calls usbhid_restart_queues() with usbhid->lock held and the others call it without holding the lock. The first item in particular causes a problem following a reset-resume if the driver hasn't started up its I/O. URB submission fails because usbhid->urbin is NULL, and this triggers an unending reset-retry loop. This patch fixes the problem by creating a new subroutine, hid_restart_io(), to carry out all the common activities. It also adds some checks that were missing in the original code: After a reset, there's no need to clear any halted endpoints. After a resume, if a reset is pending there's no need to restart any I/O until the reset is finished. After a resume, if the interrupt-IN endpoint is halted there's no need to submit the input URB until the halt has been cleared. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Daniel Fraga <fragabr@gmail.com> Tested-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Peter Zijlstra authored
commit 28a967c3 upstream. Because event_sched_out() checks event->pending_disable _before_ actually disabling the event, it can happen that the event fires after it checks but before it gets disabled. This would leave event->pending_disable set and the queued irq_work will try and process it. However, if the event trigger was during schedule(), the event might have been de-scheduled by the time the irq_work runs, and perf_event_disable_local() will fail. Fix this by checking event->pending_disable _after_ we call event->pmu->del(). This depends on the latter being a compiler barrier, such that the compiler does not lift the load and re-creates the problem. Tested-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Theodore Ts'o authored
commit daf647d2 upstream. With the internal Quota feature, mke2fs creates empty quota inodes and quota usage tracking is enabled as soon as the file system is mounted. Since quotacheck is no longer preallocating all of the blocks in the quota inode that are likely needed to be written to, we are now seeing a lockdep false positive caused by needing to allocate a quota block from inside ext4_map_blocks(), while holding i_data_sem for a data inode. This results in this complaint: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ei->i_data_sem); lock(&s->s_dquot.dqio_mutex); lock(&ei->i_data_sem); lock(&s->s_dquot.dqio_mutex); Google-Bug-Id: 27907753 Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Yoshihiro Shimoda authored
commit 6490865c upstream. This patch adds a code to surely disable TX IRQ of the pipe before starting TX DMAC transfer. Otherwise, a lot of unnecessary TX IRQs may happen in rare cases when DMAC is used. Fixes: e73a9891 ("usb: renesas_usbhs: add DMAEngine support") Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Yoshihiro Shimoda authored
commit 894f2fc4 upstream. When unexpected situation happened (e.g. tx/rx irq happened while DMAC is used), the usbhsf_pkt_handler() was possible to cause NULL pointer dereference like the followings: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 80000007 [#1] SMP ARM Modules linked in: usb_f_acm u_serial g_serial libcomposite CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.5.0-rc6-00842-gac57066-dirty #63 Hardware name: Generic R8A7790 (Flattened Device Tree) task: c0729c00 ti: c0724000 task.ti: c0724000 PC is at 0x0 LR is at usbhsf_pkt_handler+0xac/0x118 pc : [<00000000>] lr : [<c03257e0>] psr: 60000193 sp : c0725db8 ip : 00000000 fp : c0725df4 r10: 00000001 r9 : 00000193 r8 : ef3ccab4 r7 : ef3cca10 r6 : eea4586c r5 : 00000000 r4 : ef19ceb4 r3 : 00000000 r2 : 0000009c r1 : c0725dc4 r0 : ef19ceb4 This patch adds a condition to avoid the dereference. Fixes: e73a9891 ("usb: renesas_usbhs: add DMAEngine support") Signed-off-by:
-
Michal Kazior authored
commit cf440128 upstream. The ieee80211_queue_stopped() expects hw queue number but it was given raw WMM AC number instead. This could cause frame drops and problems with traffic in some cases - most notably if driver doesn't map AC numbers to queue numbers 1:1 and uses ieee80211_stop_queues() and ieee80211_wake_queue() only without ever calling ieee80211_wake_queues(). On ath10k it was possible to hit this problem in the following case: 1. wlan0 uses queue 0 (ath10k maps queues per vif) 2. offchannel uses queue 15 3. queues 1-14 are unused 4. ieee80211_stop_queues() 5. ieee80211_wake_queue(q=0) 6. ieee80211_wake_queue(q=15) (other queues are not woken up because both driver and mac80211 know other queues are unused) 7. ieee80211_rx_h_mesh_fwding() 8. ieee80211_select_queue_80211() returns 2 9. ieee80211_queue_stopped(q=2) returns true 10. frame is dropped (oops!) Fixes: d3c1597b ("mac80211: fix forwarded mesh frame queue mapping") Signed-off-by:
Michal Kazior <michal.kazior@tieto.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Thadeu Lima de Souza Cascardo authored
[ Upstream commit b6ee376c ] When creating an ip6tnl tunnel with ip tunnel, rtnl_link_ops is not set before ip6_tnl_create2 is called. When register_netdevice is called, there is no linkinfo attribute in the NEWLINK message because of that. Setting rtnl_link_ops before calling register_netdevice fixes that. Fixes: 0b112457 ("ip6tnl: add support of link creation via rtnl") Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@redhat.com> Acked-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Haishuang Yan authored
[ Upstream commit be447f30 ] pskb_may_pull() can change skb->data, so we have to load ptr/optr at the right place. Signed-off-by:
Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by:
-
Haishuang Yan authored
[ Upstream commit 5745b823 ] pskb_may_pull() can change skb->data, so we have to load ptr/optr at the right place. Signed-off-by:
-
Bjørn Mork authored
[ Upstream commit e84810c7 ] Thomas reports: "Windows: 00 diagnostics 01 modem 02 at-port 03 nmea 04 nic Linux: T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2001 ProdID=7e19 Rev=02.32 S: Manufacturer=Mobile Connect S: Product=Mobile Connect S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage" Reported-by:
Thomas Schäfer <tschaefer@t-online.de> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Guillaume Nault authored
[ Upstream commit 1f461dcd ] Let channels hold a reference on their network namespace. Some channel types, like ppp_async and ppp_synctty, can have their userspace controller running in a different namespace. Therefore they can't rely on them to preclude their netns from being removed from under them. ================================================================== BUG: KASAN: use-after-free in ppp_unregister_channel+0x372/0x3a0 at addr ffff880064e217e0 Read of size 8 by task syz-executor/11581 ============================================================================= BUG net_namespace (Not tainted): kasan: bad access detected ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Allocated in copy_net_ns+0x6b/0x1a0 age=92569 cpu=3 pid=6906 [< none >] ___slab_alloc+0x4c7/0x500 kernel/mm/slub.c:2440 [< none >] __slab_alloc+0x4c/0x90 kernel/mm/slub.c:2469 [< inline >] slab_alloc_node kernel/mm/slub.c:2532 [< inline >] slab_alloc kernel/mm/slub.c:2574 [< none >] kmem_cache_alloc+0x23a/0x2b0 kernel/mm/slub.c:2579 [< inline >] kmem_cache_zalloc kernel/include/linux/slab.h:597 [< inline >] net_alloc kernel/net/core/net_namespace.c:325 [< none >] copy_net_ns+0x6b/0x1a0 kernel/net/core/net_namespace.c:360 [< none >] create_new_namespaces+0x2f6/0x610 kernel/kernel/nsproxy.c:95 [< none >] copy_namespaces+0x297/0x320 kernel/kernel/nsproxy.c:150 [< none >] copy_process.part.35+0x1bf4/0x5760 kernel/kernel/fork.c:1451 [< inline >] copy_process kernel/kernel/fork.c:1274 [< none >] _do_fork+0x1bc/0xcb0 kernel/kernel/fork.c:1723 [< inline >] SYSC_clone kernel/kernel/fork.c:1832 [< none >] SyS_clone+0x37/0x50 kernel/kernel/fork.c:1826 [< none >] entry_SYSCALL_64_fastpath+0x16/0x7a kernel/arch/x86/entry/entry_64.S:185 INFO: Freed in net_drop_ns+0x67/0x80 age=575 cpu=2 pid=2631 [< none >] __slab_free+0x1fc/0x320 kernel/mm/slub.c:2650 [< inline >] slab_free kernel/mm/slub.c:2805 [< none >] kmem_cache_free+0x2a0/0x330 kernel/mm/slub.c:2814 [< inline >] net_free kernel/net/core/net_namespace.c:341 [< none >] net_drop_ns+0x67/0x80 kernel/net/core/net_namespace.c:348 [< none >] cleanup_net+0x4e5/0x600 kernel/net/core/net_namespace.c:448 [< none >] process_one_work+0x794/0x1440 kernel/kernel/workqueue.c:2036 [< none >] worker_thread+0xdb/0xfc0 kernel/kernel/workqueue.c:2170 [< none >] kthread+0x23f/0x2d0 kernel/drivers/block/aoe/aoecmd.c:1303 [< none >] ret_from_fork+0x3f/0x70 kernel/arch/x86/entry/entry_64.S:468 INFO: Slab 0xffffea0001938800 objects=3 used=0 fp=0xffff880064e20000 flags=0x5fffc0000004080 INFO: Object 0xffff880064e20000 @offset=0 fp=0xffff880064e24200 CPU: 1 PID: 11581 Comm: syz-executor Tainted: G B 4.4.0+ Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014 00000000ffffffff ffff8800662c7790 ffffffff8292049d ffff88003e36a300 ffff880064e20000 ffff880064e20000 ffff8800662c77c0 ffffffff816f2054 ffff88003e36a300 ffffea0001938800 ffff880064e20000 0000000000000000 Call Trace: [< inline >] __dump_stack kernel/lib/dump_stack.c:15 [<ffffffff8292049d>] dump_stack+0x6f/0xa2 kernel/lib/dump_stack.c:50 [<ffffffff816f2054>] print_trailer+0xf4/0x150 kernel/mm/slub.c:654 [<ffffffff816f875f>] object_err+0x2f/0x40 kernel/mm/slub.c:661 [< inline >] print_address_description kernel/mm/kasan/report.c:138 [<ffffffff816fb0c5>] kasan_report_error+0x215/0x530 kernel/mm/kasan/report.c:236 [< inline >] kasan_report kernel/mm/kasan/report.c:259 [<ffffffff816fb4de>] __asan_report_load8_noabort+0x3e/0x40 kernel/mm/kasan/report.c:280 [< inline >] ? ppp_pernet kernel/include/linux/compiler.h:218 [<ffffffff83ad71b2>] ? ppp_unregister_channel+0x372/0x3a0 kernel/drivers/net/ppp/ppp_generic.c:2392 [< inline >] ppp_pernet kernel/include/linux/compiler.h:218 [<ffffffff83ad71b2>] ppp_unregister_channel+0x372/0x3a0 kernel/drivers/net/ppp/ppp_generic.c:2392 [< inline >] ? ppp_pernet kernel/drivers/net/ppp/ppp_generic.c:293 [<ffffffff83ad6f26>] ? ppp_unregister_channel+0xe6/0x3a0 kernel/drivers/net/ppp/ppp_generic.c:2392 [<ffffffff83ae18f3>] ppp_asynctty_close+0xa3/0x130 kernel/drivers/net/ppp/ppp_async.c:241 [<ffffffff83ae1850>] ? async_lcp_peek+0x5b0/0x5b0 kernel/drivers/net/ppp/ppp_async.c:1000 [<ffffffff82c33239>] tty_ldisc_close.isra.1+0x99/0xe0 kernel/drivers/tty/tty_ldisc.c:478 [<ffffffff82c332c0>] tty_ldisc_kill+0x40/0x170 kernel/drivers/tty/tty_ldisc.c:744 [<ffffffff82c34943>] tty_ldisc_release+0x1b3/0x260 kernel/drivers/tty/tty_ldisc.c:772 [<ffffffff82c1ef21>] tty_release+0xac1/0x13e0 kernel/drivers/tty/tty_io.c:1901 [<ffffffff82c1e460>] ? release_tty+0x320/0x320 kernel/drivers/tty/tty_io.c:1688 [<ffffffff8174de36>] __fput+0x236/0x780 kernel/fs/file_table.c:208 [<ffffffff8174e405>] ____fput+0x15/0x20 kernel/fs/file_table.c:244 [<ffffffff813595ab>] task_work_run+0x16b/0x200 kernel/kernel/task_work.c:115 [< inline >] exit_task_work kernel/include/linux/task_work.h:21 [<ffffffff81307105>] do_exit+0x8b5/0x2c60 kernel/kernel/exit.c:750 [<ffffffff813fdd20>] ? debug_check_no_locks_freed+0x290/0x290 kernel/kernel/locking/lockdep.c:4123 [<ffffffff81306850>] ? mm_update_next_owner+0x6f0/0x6f0 kernel/kernel/exit.c:357 [<ffffffff813215e6>] ? __dequeue_signal+0x136/0x470 kernel/kernel/signal.c:550 [<ffffffff8132067b>] ? recalc_sigpending_tsk+0x13b/0x180 kernel/kernel/signal.c:145 [<ffffffff81309628>] do_group_exit+0x108/0x330 kernel/kernel/exit.c:880 [<ffffffff8132b9d4>] get_signal+0x5e4/0x14f0 kernel/kernel/signal.c:2307 [< inline >] ? kretprobe_table_lock kernel/kernel/kprobes.c:1113 [<ffffffff8151d355>] ? kprobe_flush_task+0xb5/0x450 kernel/kernel/kprobes.c:1158 [<ffffffff8115f7d3>] do_signal+0x83/0x1c90 kernel/arch/x86/kernel/signal.c:712 [<ffffffff8151d2a0>] ? recycle_rp_inst+0x310/0x310 kernel/include/linux/list.h:655 [<ffffffff8115f750>] ? setup_sigcontext+0x780/0x780 kernel/arch/x86/kernel/signal.c:165 [<ffffffff81380864>] ? finish_task_switch+0x424/0x5f0 kernel/kernel/sched/core.c:2692 [< inline >] ? finish_lock_switch kernel/kernel/sched/sched.h:1099 [<ffffffff81380560>] ? finish_task_switch+0x120/0x5f0 kernel/kernel/sched/core.c:2678 [< inline >] ? context_switch kernel/kernel/sched/core.c:2807 [<ffffffff85d794e9>] ? __schedule+0x919/0x1bd0 kernel/kernel/sched/core.c:3283 [<ffffffff81003901>] exit_to_usermode_loop+0xf1/0x1a0 kernel/arch/x86/entry/common.c:247 [< inline >] prepare_exit_to_usermode kernel/arch/x86/entry/common.c:282 [<ffffffff810062ef>] syscall_return_slowpath+0x19f/0x210 kernel/arch/x86/entry/common.c:344 [<ffffffff85d88022>] int_ret_from_sys_call+0x25/0x9f kernel/arch/x86/entry/entry_64.S:281 Memory state around the buggy address: ffff880064e21680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff880064e21700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff880064e21780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff880064e21800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff880064e21880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Fixes: 273ec51d ("net: ppp_generic - introduce net-namespace functionality v2") Reported-by:
Baozeng Ding <sploving1@gmail.com> Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Reviewed-by:
Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by:
-
Paolo Abeni authored
[ Upstream commit ad0ea198 ] Currently, ingress ipv4 broadcast datagrams are dropped since, in udp_v4_early_demux(), ip_check_mc_rcu() is invoked even on bcast packets. This patch addresses the issue, invoking ip_check_mc_rcu() only for mcast packets. Fixes: 6e540309 ("ipv4/udp: Verify multicast group is ours in upd_v4_early_demux()") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Manish Chopra authored
[ Upstream commit 2c9a266a ] When running small packets [length < 256 bytes] traffic, packets were being dropped due to invalid data in those packets which were delivered by the driver upto the stack. Using pci_dma_sync_single_for_cpu ensures copying latest and updated data into skb from the receive buffer. Signed-off-by:
Sony Chacko <sony.chacko@qlogic.com> Signed-off-by:
Manish Chopra <manish.chopra@qlogic.com> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 83d6f1f1 ] Code that was added back in 2.6.38 has an obvious overflow when accessing a static array, and at the time it was added only a code comment was put in front of it as a reminder to have it reviewed properly. This has not happened, but gcc-6 now points to the specific overflow: drivers/net/wireless/ath/ath9k/eeprom.c: In function 'ath9k_hw_get_gain_boundaries_pdadcs': drivers/net/wireless/ath/ath9k/eeprom.c:483:44: error: array subscript is above array bounds [-Werror=array-bounds] maxPwrT4[i] = data_9287[idxL].pwrPdg[i][4]; ~~~~~~~~~~~~~~~~~~~~~~~~~^~~ It turns out that the correct array length exists in the local 'intercepts' variable of this function, so we can just use that instead of hardcoding '4', so this patch changes all three instances to use that variable. The other two instances were already correct, but it's more consistent this way. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: 940cd2c1 ("ath9k_hw: merge the ar9287 version of ath9k_hw_get_gain_boundaries_pdadcs") Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit e725a66c ] gcc-6 finds an out of bounds access in the fst_add_one function when calculating the end of the mmio area: drivers/net/wan/farsync.c: In function 'fst_add_one': drivers/net/wan/farsync.c:418:53: error: index 2 denotes an offset greater than size of 'u8[2][8192] {aka unsigned char[2][8192]}' [-Werror=array-bounds] #define BUF_OFFSET(X) (BFM_BASE + offsetof(struct buf_window, X)) ^ include/linux/compiler-gcc.h:158:21: note: in definition of macro '__compiler_offsetof' __builtin_offsetof(a, b) ^ drivers/net/wan/farsync.c:418:37: note: in expansion of macro 'offsetof' #define BUF_OFFSET(X) (BFM_BASE + offsetof(struct buf_window, X)) ^~~~~~~~ drivers/net/wan/farsync.c:2519:36: note: in expansion of macro 'BUF_OFFSET' + BUF_OFFSET ( txBuffer[i][NUM_TX_BUFFER][0]); ^~~~~~~~~~ The warning is correct, but not critical because this appears to be a write-only variable that is set by each WAN driver but never accessed afterwards. I'm taking the minimal fix here, using the correct pointer by pointing 'mem_end' to the last byte inside of the register area as all other WAN drivers do, rather than the first byte outside of it. An alternative would be to just remove the mem_end member entirely. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
[ Upstream commit 34b88a68 ] The syzkaller fuzzer hit the following use-after-free: Call Trace: [<ffffffff8175ea0e>] __asan_report_load8_noabort+0x3e/0x40 mm/kasan/report.c:295 [<ffffffff851cc31a>] __sys_recvmmsg+0x6fa/0x7f0 net/socket.c:2261 [< inline >] SYSC_recvmmsg net/socket.c:2281 [<ffffffff851cc57f>] SyS_recvmmsg+0x16f/0x180 net/socket.c:2270 [<ffffffff86332bb6>] entry_SYSCALL_64_fastpath+0x16/0x7a arch/x86/entry/entry_64.S:185 And, as Dmitry rightly assessed, that is because we can drop the reference and then touch it when the underlying recvmsg calls return some packets and then hit an error, which will make recvmmsg to set sock->sk->sk_err, oops, fix it. Reported-and-Tested-by:
Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Kostya Serebryany <kcc@google.com> Cc: Sasha Levin <sasha.levin@oracle.com> Fixes: a2e27255 ("net: Introduce recvmmsg socket syscall") http://lkml.kernel.org/r/20160122211644.GC2470@redhat.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Sergei Shtylyov authored
[ Upstream commit c1b7fca6 ] In a low memory situation, if netdev_alloc_skb() fails on a first RX ring loop iteration in sh_eth_ring_format(), 'rxdesc' is still NULL. Avoid kernel oops by adding the 'rxdesc' check after the loop. Reported-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Bill Sommerfeld authored
[ Upstream commit 59dca1d8 ] IPv4 interprets a negative return value from a protocol handler as a request to redispatch to a new protocol. In contrast, IPv6 interprets a negative value as an error, and interprets a positive value as a request for redispatch. UDP for IPv6 was unaware of this difference. Change __udp6_lib_rcv() to return a positive value for redispatch. Note that the socket's encap_rcv hook still needs to return a negative value to request dispatch, and in the case of IPv6 packets, adjust IP6CB(skb)->nhoff to identify the byte containing the next protocol. Signed-off-by:
Bill Sommerfeld <wsommerfeld@google.com> Signed-off-by:
-
Oliver Neukum authored
[ Upstream commit 1666984c ] In case bind() works, but a later error forces bailing in probe() in error cases work and a timer may be scheduled. They must be killed. This fixes an error case related to the double free reported in http://www.spinics.net/lists/netdev/msg367669.html and needs to go on top of Linus' fix to cdc-ncm. Signed-off-by:
Oliver Neukum <ONeukum@suse.com> Signed-off-by:
-
Bjørn Mork authored
[ Upstream commit 48906f62 ] Some devices will silently fail setup unless they are reset first. This is necessary even if the data interface is already in altsetting 0, which it will be when the device is probed for the first time. Briefly toggling the altsetting forces a function reset regardless of the initial state. This fixes a setup problem observed on a number of Huawei devices, appearing to operate in NTB-32 mode even if we explicitly set them to NTB-16 mode. Signed-off-by:
-
Florian Westphal authored
[ Upstream commit 5d150a98 ] When ipv6_find_hdr is used to find a fragment header (caller specifies target NEXTHDR_FRAGMENT) we erronously return -ENOENT for all fragments with nonzero offset. Before commit 9195bb8e, when target was specified, we did not enter the exthdr walk loop as nexthdr == target so this used to work. Now we do (so we can skip empty route headers). When we then stumble upon a frag with nonzero frag_off we must return -ENOENT ("header not found") only if the caller did not specifically request NEXTHDR_FRAGMENT. This allows nfables exthdr expression to match ipv6 fragments, e.g. via nft add rule ip6 filter input frag frag-off gt 0 Fixes: 9195bb8e ("ipv6: improve ipv6_find_hdr() to skip empty routing headers") Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Xin Long authored
[ Upstream commit 40b4f0fd ] As the member .cmp_addr of sctp_af_inet6, sctp_v6_cmp_addr should also check the port of addresses, just like sctp_v4_cmp_addr, cause it's invoked by sctp_cmp_addr_exact(). Now sctp_v6_cmp_addr just check the port when two addresses have different family, and lack the port check for two ipv6 addresses. that will make sctp_hash_cmp() cannot work well. so fix it by adding ports comparison in sctp_v6_cmp_addr(). Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Diego Viola authored
[ Upstream commit ee50c130 ] The JMC260 network card fails to suspend/resume because the call to jme_start_irq() was too early, moving the call to jme_start_irq() after the call to jme_reset_link() makes it work. Prior this change suspend/resume would fail unless /sys/power/pm_async=0 was explicitly specified. Relevant bug report: https://bugzilla.kernel.org/show_bug.cgi?id=112351Signed-off-by:
Diego Viola <diego.viola@gmail.com> Signed-off-by:
-
Boris Ostrovsky authored
commit ff1e22e7 upstream. Moving an unmasked irq may result in irq handler being invoked on both source and target CPUs. With 2-level this can happen as follows: On source CPU: evtchn_2l_handle_events() -> generic_handle_irq() -> handle_edge_irq() -> eoi_pirq(): irq_move_irq(data); /***** WE ARE HERE *****/ if (VALID_EVTCHN(evtchn)) clear_evtchn(evtchn); If at this moment target processor is handling an unrelated event in evtchn_2l_handle_events()'s loop it may pick up our event since target's cpu_evtchn_mask claims that this event belongs to it *and* the event is unmasked and still pending. At the same time, source CPU will continue executing its own handle_edge_irq(). With FIFO interrupt the scenario is similar: irq_move_irq() may result in a EVTCHNOP_unmask hypercall which, in turn, may make the event pending on the target CPU. We can avoid this situation by moving and clearing the event while keeping event masked. Signed-off-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
-
Alex Deucher authored
commit 0e5585dc upstream. Higher mclk values are not stable due to a bug somewhere. Limit them for now. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit f971f226 upstream. bug: https://bugs.freedesktop.org/show_bug.cgi?id=94692Signed-off-by:
-
Xishi Qiu authored
commit 6f25a14a upstream. It is incorrect to use next_node to find a target node, it will return MAX_NUMNODES or invalid node. This will lead to crash in buddy system allocation. Fixes: c8721bbb ("mm: memory-hotplug: enable memory hotplug to handle hugepage") Signed-off-by:
Xishi Qiu <qiuxishi@huawei.com> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Acked-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Joonsoo Kim <js1304@gmail.com> Cc: David Rientjes <rientjes@google.com> Cc: "Laura Abbott" <lauraa@codeaurora.org> Cc: Hui Zhu <zhuhui@xiaomi.com> Cc: Wang Xiaoqiang <wangxq10@lzu.edu.cn> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Takashi Iwai authored
commit 4a07083e upstream. ALSA system timer backend stops the timer via del_timer() without sync and leaves del_timer_sync() at the close instead. This is because of the restriction by the design of ALSA timer: namely, the stop callback may be called from the timer handler, and calling the sync shall lead to a hangup. However, this also triggers a kernel BUG() when the timer is rearmed immediately after stopping without sync: kernel BUG at kernel/time/timer.c:966! Call Trace: <IRQ> [<ffffffff8239c94e>] snd_timer_s_start+0x13e/0x1a0 [<ffffffff8239e1f4>] snd_timer_interrupt+0x504/0xec0 [<ffffffff8122fca0>] ? debug_check_no_locks_freed+0x290/0x290 [<ffffffff8239ec64>] snd_timer_s_function+0xb4/0x120 [<ffffffff81296b72>] call_timer_fn+0x162/0x520 [<ffffffff81296add>] ? call_timer_fn+0xcd/0x520 [<ffffffff8239ebb0>] ? snd_timer_interrupt+0xec0/0xec0 .... It's the place where add_timer() checks the pending timer. It's clear that this may happen after the immediate restart without sync in our cases. So, the workaround here is just to use mod_timer() instead of add_timer(). This looks like a band-aid fix, but it's a right move, as snd_timer_interrupt() takes care of the continuous rearm of timer. Reported-by:
Jiri Slaby <jslaby@suse.cz> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Helge Deller authored
commit ef72f311 upstream. The kernel module testcase (lib/test_user_copy.c) exhibited a kernel crash on parisc if the parameters for copy_from_user were reversed ("illegal reversed copy_to_user" testcase). Fix this potential crash by checking the fault handler if the faulting address is in the exception table. Signed-off-by:
Helge Deller <deller@gmx.de> Cc: Kees Cook <keescook@chromium.org> Signed-off-by:
-
Helge Deller authored
commit e3893027 upstream. We want to avoid the kernel module loader to create function pointers for the kernel fixup routines of get_user() and put_user(). Changing the external reference from function type to int type fixes this. This unbreaks exception handling for get_user() and put_user() when called from a kernel module. Signed-off-by:
-
Guenter Roeck authored
commit 3c2e2266 upstream. arm:pxa_defconfig can result in the following crash if the max1111 driver is not instantiated. Unhandled fault: page domain fault (0x01b) at 0x00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: : 1b [#1] PREEMPT ARM Modules linked in: CPU: 0 PID: 300 Comm: kworker/0:1 Not tainted 4.5.0-01301-g1701f680 #10 Hardware name: SHARP Akita Workqueue: events sharpsl_charge_toggle task: c390a000 ti: c391e000 task.ti: c391e000 PC is at max1111_read_channel+0x20/0x30 LR is at sharpsl_pm_pxa_read_max1111+0x2c/0x3c pc : [<c03aaab0>] lr : [<c0024b50>] psr: 20000013 ... [<c03aaab0>] (max1111_read_channel) from [<c0024b50>] (sharpsl_pm_pxa_read_max1111+0x2c/0x3c) [<c0024b50>] (sharpsl_pm_pxa_read_max1111) from [<c00262e0>] (spitzpm_read_devdata+0x5c/0xc4) [<c00262e0>] (spitzpm_read_devdata) from [<c0024094>] (sharpsl_check_battery_temp+0x78/0x110) [<c0024094>] (sharpsl_check_battery_temp) from [<c0024f9c>] (sharpsl_charge_toggle+0x48/0x110) [<c0024f9c>] (sharpsl_charge_toggle) from [<c004429c>] (process_one_work+0x14c/0x48c) [<c004429c>] (process_one_work) from [<c0044618>] (worker_thread+0x3c/0x5d4) [<c0044618>] (worker_thread) from [<c004a238>] (kthread+0xd0/0xec) [<c004a238>] (kthread) from [<c000a670>] (ret_from_fork+0x14/0x24) This can occur because the SPI controller driver (SPI_PXA2XX) is built as module and thus not necessarily loaded. While building SPI_PXA2XX into the kernel would make the problem disappear, it appears prudent to ensure that the driver is instantiated before accessing its data structures. Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
- 12 Apr, 2016 3 commits
-
-
Greg Kroah-Hartman authored
-
Andi Kleen authored
commit e17dc653 upstream. Jiri reported some time ago that some entries in the PEBS data source table in perf do not agree with the SDM. We investigated and the bits changed for Sandy Bridge, but the SDM was not updated. perf already implements the bits correctly for Sandy Bridge and later. This patch patches it up for Nehalem and Westmere. Signed-off-by:
Andi Kleen <ak@linux.intel.com> Signed-off-by:
-
Jiri Olsa authored
commit e72daf3f upstream. Using PAGE_SIZE buffers makes the WRMSR to PERF_GLOBAL_CTRL in intel_pmu_enable_all() mysteriously hang on Core2. As a workaround, we don't do this. The hard lockup is easily triggered by running 'perf test attr' repeatedly. Most of the time it gets stuck on sample session with small periods. # perf test attr -vv 14: struct perf_event_attr setup : --- start --- ... 'PERF_TEST_ATTR=/tmp/tmpuEKz3B /usr/bin/perf record -o /tmp/tmpuEKz3B/perf.data -c 123 kill >/dev/null 2>&1' ret 1 Reported-by:
Jiri Olsa <jolsa@kernel.org> Signed-off-by:
-
