Pull s390 updates from Vasily Gorbik:

 - Rework inline asm to get rid of error prone "register asm"
   constructs, which are problematic especially when code
   instrumentation is enabled.

   In particular introduce and use register pair union to allocate
   even/odd register pairs. Unfortunately this breaks compatibility with
   older clang compilers and minimum clang version for s390 has been
   raised to 13.

     https://lore.kernel.org/linux-next/CAK7LNARuSmPCEy-ak0erPrPTgZdGVypBROFhtw+=3spoGoYsyw@mail.gmail.com/

 - Fix gcc 11 warnings, which triggered various minor reworks all over
   the code.

 - Add zstd kernel image compression support.

 - Rework boot CPU lowcore handling.

 - De-duplicate and move kernel memory layout setup logic earlier.

 - Few fixes in preparation for FORTIFY_SOURCE performing compile-time
   and run-time field bounds checking for mem functions.

 - Remove broken and unused power management support leftovers in s390
   drivers.

 - Disable stack-protector for decompressor and purgatory to fix
   buildroot build.

 - Fix vt220 sclp console name to match the char device name.

 - Enable HAVE_IOREMAP_PROT and add zpci_set_irq()/zpci_clear_irq() in
   zPCI code.

 - Remove some implausible WARN_ON_ONCEs and remove arch specific
   counter transaction call backs in favour of default transaction
   handling in perf code.

 - Extend/add new uevents for online/config/mode state changes of AP
   card / queue device in zcrypt.

 - Minor entry and ccwgroup code improvements.

 - Other small various fixes and improvements all over the code.

* tag 's390-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (91 commits)
  s390/dasd: use register pair instead of register asm
  s390/qdio: get rid of register asm
  s390/ioasm: use symbolic names for asm operands
  s390/ioasm: get rid of register asm
  s390/cmf: get rid of register asm
  s390/lib,string: get rid of register asm
  s390/lib,uaccess: get rid of register asm
  s390/string: get rid of register asm
  s390/cmpxchg: use register pair instead of register asm
  s390/mm,pages-states: get rid of register asm
  s390/lib,xor: get rid of register asm
  s390/timex: get rid of register asm
  s390/hypfs: use register pair instead of register asm
  s390/zcrypt: Switch to flexible array member
  s390/speculation: Use statically initialized const for instructions
  virtio/s390: get rid of open-coded kvm hypercall
  s390/pci: add zpci_set_irq()/zpci_clear_irq()
  scripts/min-tool-version.sh: Raise minimum clang version to 13.0.0 for s390
  s390/ipl: use register pair instead of register asm
  s390/mem_detect: fix tprot() program check new psw handling
  ...

Pull arch/csky updates from Guo Ren:
 "A small cleanup and a fixup"

* tag 'csky-for-linus-5.14-rc1' of git://github.com/c-sky/csky-linux:
  csky: Kconfig: Remove unused selects
  csky: syscache: Fixup duplicate cache flush

Pull CXL (Compute Express Link) updates from Dan Williams:
 "This subsystem is still in the build-out phase as the bulk of the
  update is improvements to enumeration and fleshing out the device
  model. In terms of new features, more mailbox commands have been added
  to the allowed-list in support of persistent memory provisioning
  support targeting v5.15.

  The critical update from an enumeration perspective is support for the
  CXL Fixed Memory Window Structure that indicates to Linux which system
  physical address ranges decode to the CXL Host Bridges in the system.
  This allows the driver to detect which address ranges have been mapped
  by firmware and what address ranges are available for future hotplug.

  So, again, mostly skeleton this round, with more meat targeting v5.15.

  Summary:

   - Add support for the CXL Fixed Memory Window Structure, a recent
     extension of the ACPI CEDT (CXL Early Discovery Table)

   - Add infrastructure for component registers

   - Add HDM (Host-managed device memory) decoder definitions

   - Define a device model for an HDM decoder tree

   - Bridge CXL persistent memory capabilities to an NVDIMM bus /
     device-model

   - Switch to fine grained mapping of CXL MMIO registers to allow
     different drivers / system software to own individual register
     blocks

   - Enable media provisioning commands, and publish the label storage
     area size in sysfs

   - Miscellaneous cleanups and fixes"

* tag 'cxl-for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (34 commits)
  cxl/pci: Rename CXL REGLOC ID
  cxl/acpi: Use the ACPI CFMWS to create static decoder objects
  cxl/acpi: Add the Host Bridge base address to CXL port objects
  cxl/pmem: Register 'pmem' / cxl_nvdimm devices
  libnvdimm: Drop unused device power management support
  libnvdimm: Export nvdimm shutdown helper, nvdimm_delete()
  cxl/pmem: Add initial infrastructure for pmem support
  cxl/core: Add cxl-bus driver infrastructure
  cxl/pci: Add media provisioning required commands
  cxl/component_regs: Fix offset
  cxl/hdm: Fix decoder count calculation
  cxl/acpi: Introduce cxl_decoder objects
  cxl/acpi: Enumerate host bridge root ports
  cxl/acpi: Add downstream port data to cxl_port instances
  cxl/Kconfig: Default drivers to CONFIG_CXL_BUS
  cxl/acpi: Introduce the root of a cxl_port topology
  cxl/pci: Fixup devm_cxl_iomap_block() to take a 'struct device *'
  cxl/pci: Add HDM decoder capabilities
  cxl/pci: Reserve individual register block regions
  cxl/pci: Map registers based on capabilities
  ...

Pull i2c updates from Wolfram Sang:

 - core supports now bus regulators controlling power for SCL/SDA

 - quite some DT binding conversions to YAML

 - added a seperate DT binding for the optional SMBus Alert feature

 - documentation with examples how to deal with I2C sysfs files

 - some bigger rework for the i801 driver

 - and a few usual driver updates

* 'i2c/for-mergewindow' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (42 commits)
  i2c: ali1535: mention that the device should not be disabled
  i2c: mpc: Restore reread of I2C status register
  i2c: core-smbus: Expose PEC calculate function for generic use
  Documentation: i2c: Add doc for I2C sysfs
  i2c: core: Disable client irq on reboot/shutdown
  dt-bindings: i2c: update bindings for MT8195 SoC
  i2c: imx: Fix some checkpatch warnings
  i2c: davinci: Simplify with dev_err_probe()
  i2c: cadence: Simplify with dev_err_probe()
  i2c: xiic: Simplify with dev_err_probe()
  i2c: cadence: Clear HOLD bit before xfer_size register rolls over
  dt-bindings: i2c: ce4100: Replace "ti,pcf8575" by "nxp,pcf8575"
  i2c: i801: Improve i801_setup_hstcfg
  i2c: i801: Use driver name constant instead of function dev_driver_string
  i2c: i801: Simplify initialization of i2c_board_info in i801_probe_optional_slaves
  i2c: i801: Improve status polling
  i2c: cht-wc: Replace of_node by NULL
  i2c: riic: Add RZ/G2L support
  dt-bindings: i2c: renesas,riic: Document RZ/G2L I2C controller
  dt-bindings: i2c: renesas,iic: Convert to json-schema
  ...

Commit d2bcbeab ("scsi: blkcg: Add app identifier support for
blkcg") introduced an FC_APPID config option under SCSI. However, the
added config option is not used anywhere. Simply remove it.

The block layer BLK_CGROUP_FC_APPID config option is what actually
controls whether the application ID code should be built or not. Make
this option dependent on NVMe over FC since that is currently the only
transport which supports the capability.

Fixes: d2bcbeab ("scsi: blkcg: Add app identifier support for blkcg")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

 - GENERIC_ALLOCATOR is duplicated
 - Remove USB_ARCH_HAS_OHCI & USB_ARCH_HAS_EHCI, because they
   have been removed from linux.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Cc: Arnd Bergmann <arnd@arndb.de>

The current csky logic of sys_cacheflush is wrong, it'll cause
icache flush call dcache flush again. Now fixup it with a
conditional "break & fallthrough".

Fixes: 997153b9 ("csky: Add flush_icache_mm to defer flush icache all")
Fixes: 0679d29d ("csky: fix syscache.c fallthrough warning")
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Co-Developed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Cc: Arnd Bergmann <arnd@arndb.de>

Pull LED updates from Pavel Machek:
 "This contains quite a lot of fixes, with more fixes in my inbox that
  did not make it (sorry)"

* tag 'leds-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: (36 commits)
  leds: lgm: Fix up includes
  leds: ktd2692: Fix an error handling path
  leds: as3645a: Fix error return code in as3645a_parse_node()
  leds: turris-omnia: add missing MODULE_DEVICE_TABLE
  leds: lp55xx: Initialize enable GPIO direction to output
  leds: lm36274: Add missed property.h
  leds: el15203000: Make error handling more robust
  leds: pwm: Make error handling more robust
  leds: lt3593: Make use of device properties
  leds: lp50xx: Put fwnode in error case during ->probe()
  leds: lm3697: Don't spam logs when probe is deferred
  leds: lm3692x: Put fwnode in any case during ->probe()
  leds: lm36274: Correct headers (of*.h -> mod_devicetable.h)
  leds: lm36274: Put fwnode in error case during ->probe()
  leds: lm3532: Make error handling more robust
  leds: lm3532: select regmap I2C API
  leds: lgm-sso: Drop duplicate NULL check for GPIO operations
  leds: lgm-sso: Remove unneeded of_match_ptr()
  leds: lgm-sso: Fix clock handling
  leds: el15203000: Introduce to_el15203000_led() helper
  ...

Pull VFIO updates from Alex Williamson:

 - Module reference fixes, structure renaming (Max Gurtovoy)

 - Export and use common pci_dev_trylock() (Luis Chamberlain)

 - Enable direct mdev device creation and probing by parent (Christoph
   Hellwig & Jason Gunthorpe)

 - Fix mdpy error path leak (Colin Ian King)

 - Fix mtty list entry leak (Jason Gunthorpe)

 - Enforce mtty device limit (Alex Williamson)

 - Resolve concurrent vfio-pci mmap faults (Alex Williamson)

* tag 'vfio-v5.14-rc1' of git://github.com/awilliam/linux-vfio:
  vfio/pci: Handle concurrent vma faults
  vfio/mtty: Enforce available_instances
  vfio/mtty: Delete mdev_devices_list
  vfio: use the new pci_dev_trylock() helper to simplify try lock
  PCI: Export pci_dev_trylock() and pci_dev_unlock()
  vfio/mdpy: Fix memory leak of object mdev_state->vconfig
  vfio/iommu_type1: rename vfio_group struck to vfio_iommu_group
  vfio/mbochs: Convert to use vfio_register_group_dev()
  vfio/mdpy: Convert to use vfio_register_group_dev()
  vfio/mtty: Convert to use vfio_register_group_dev()
  vfio/mdev: Allow the mdev_parent_ops to specify the device driver to bind
  vfio/mdev: Remove CONFIG_VFIO_MDEV_DEVICE
  driver core: Export device_driver_attach()
  driver core: Don't return EPROBE_DEFER to userspace during sysfs bind
  driver core: Flow the return code from ->probe() through to sysfs bind
  driver core: Better distinguish probe errors in really_probe
  driver core: Pull required checks into driver_probe_device()
  vfio/platform: remove unneeded parent_module attribute
  vfio: centralize module refcount in subsystem layer

Pull vfs name lookup updates from Al Viro:
 "Small namei.c patch series, mostly to simplify the rules for nameidata
  state. It's actually from the previous cycle - but I didn't post it
  for review in time...

  Changes visible outside of fs/namei.c: file_open_root() calling
  conventions change, some freed bits in LOOKUP_... space"

* 'work.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  namei: make sure nd->depth is always valid
  teach set_nameidata() to handle setting the root as well
  take LOOKUP_{ROOT,ROOT_GRABBED,JUMPED} out of LOOKUP_... space
  switch file_open_root() to struct path

Pull iov_iter updates from Al Viro:
 "iov_iter cleanups and fixes.

  There are followups, but this is what had sat in -next this cycle. IMO
  the macro forest in there became much thinner and easier to follow..."

* 'work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits)
  csum_and_copy_to_pipe_iter(): leave handling of csum_state to caller
  clean up copy_mc_pipe_to_iter()
  pipe_zero(): we don't need no stinkin' kmap_atomic()...
  iov_iter: clean csum_and_copy_...() primitives up a bit
  copy_page_from_iter(): don't need kmap_atomic() for kvec/bvec cases
  copy_page_to_iter(): don't bother with kmap_atomic() for bvec/kvec cases
  iterate_xarray(): only of the first iteration we might get offset != 0
  pull handling of ->iov_offset into iterate_{iovec,bvec,xarray}
  iov_iter: make iterator callbacks use base and len instead of iovec
  iov_iter: make the amount already copied available to iterator callbacks
  iov_iter: get rid of separate bvec and xarray callbacks
  iov_iter: teach iterate_{bvec,xarray}() about possible short copies
  iterate_bvec(): expand bvec.h macro forest, massage a bit
  iov_iter: unify iterate_iovec and iterate_kvec
  iov_iter: massage iterate_iovec and iterate_kvec to logics similar to iterate_bvec
  iterate_and_advance(): get rid of magic in case when n is 0
  csum_and_copy_to_iter(): massage into form closer to csum_and_copy_from_iter()
  iov_iter: replace iov_iter_copy_from_user_atomic() with iterator-advancing variant
  [xarray] iov_iter_npages(): just use DIV_ROUND_UP()
  iov_iter_npages(): don't bother with iterate_all_kinds()
  ...

Pull vfs d_path() updates from Al Viro:
 "d_path.c refactoring"

* 'work.d_path' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  getcwd(2): clean up error handling
  d_path: prepend_path() is unlikely to return non-zero
  d_path: prepend_path(): lift the inner loop into a new helper
  d_path: prepend_path(): lift resetting b in case when we'd return 3 out of loop
  d_path: prepend_path(): get rid of vfsmnt
  d_path: introduce struct prepend_buffer
  d_path: make prepend_name() boolean
  d_path: lift -ENAMETOOLONG handling into callers of prepend_path()
  d_path: don't bother with return value of prepend()
  getcwd(2): saner logics around prepend_path() call
  d_path: get rid of path_with_deleted()
  d_path: regularize handling of root dentry in __dentry_path()
  d_path: saner calling conventions for __dentry_path()
  d_path: "\0" is {0,0}, not {0}

Pull tracing updates from Steven Rostedt:

 - Added option for per CPU threads to the hwlat tracer

 - Have hwlat tracer handle hotplug CPUs

 - New tracer: osnoise, that detects latency caused by interrupts,
   softirqs and scheduling of other tasks.

 - Added timerlat tracer that creates a thread and measures in detail
   what sources of latency it has for wake ups.

 - Removed the "success" field of the sched_wakeup trace event. This has
   been hardcoded as "1" since 2015, no tooling should be looking at it
   now. If one exists, we can revert this commit, fix that tool and try
   to remove it again in the future.

 - tgid mapping fixed to handle more than PID_MAX_DEFAULT pids/tgids.

 - New boot command line option "tp_printk_stop", as tp_printk causes
   trace events to write to console. When user space starts, this can
   easily live lock the system. Having a boot option to stop just after
   boot up is useful to prevent that from happening.

 - Have ftrace_dump_on_oops boot command line option take numbers that
   match the numbers shown in /proc/sys/kernel/ftrace_dump_on_oops.

 - Bootconfig clean ups, fixes and enhancements.

 - New ktest script that tests bootconfig options.

 - Add tracepoint_probe_register_may_exist() to register a tracepoint
   without triggering a WARN*() if it already exists. BPF has a path
   from user space that can do this. All other paths are considered a
   bug.

 - Small clean ups and fixes

* tag 'trace-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (49 commits)
  tracing: Resize tgid_map to pid_max, not PID_MAX_DEFAULT
  tracing: Simplify & fix saved_tgids logic
  treewide: Add missing semicolons to __assign_str uses
  tracing: Change variable type as bool for clean-up
  trace/timerlat: Fix indentation on timerlat_main()
  trace/osnoise: Make 'noise' variable s64 in run_osnoise()
  tracepoint: Add tracepoint_probe_register_may_exist() for BPF tracing
  tracing: Fix spelling in osnoise tracer "interferences" -> "interference"
  Documentation: Fix a typo on trace/osnoise-tracer
  trace/osnoise: Fix return value on osnoise_init_hotplug_support
  trace/osnoise: Make interval u64 on osnoise_main
  trace/osnoise: Fix 'no previous prototype' warnings
  tracing: Have osnoise_main() add a quiescent state for task rcu
  seq_buf: Make trace_seq_putmem_hex() support data longer than 8
  seq_buf: Fix overflow in seq_buf_putmem_hex()
  trace/osnoise: Support hotplug operations
  trace/hwlat: Support hotplug operations
  trace/hwlat: Protect kdata->kthread with get/put_online_cpus
  trace: Add timerlat tracer
  trace: Add osnoise tracer
  ...

Pull devicetree updates from Rob Herring:

 - Refine reserved memory nomap handling

 - Merge some PCI and non-PCI address handling implementations

 - Simplify of_address.h header ifdefs

 - Improve printk handling of some 64-bit types

 - Convert adi,adv7511, Arm ccree, Arm SCMI, Arm SCU, Arm TWD timer, Arm
   VIC, arm,sbsa-gwdt, Arm/Amlogic SCPI, Aspeed I2C, Broadcom iProc PWM,
   linaro,optee-tz, MDIO GPIO, Mediatek RNG, MTD physmap, NXP
   pcf8563/pcf85263/pcf85363, Renesas TPU, renesas,emev2-smu,
   renesas,r9a06g032-sysctrl, sysc-rmobile, Tegra20 EMC, TI AM56 PCI, TI
   OMAP mailbox, TI SCI bindings, virtio-mmio, Zynq FPGA, and ZynqMP RTC
   to DT schema

 - Convert mux and mux controller bindings to schema. This includes MDIO
   IIO, and I2C muxes.

 - Add Arm PL031 RTC binding schema

 - Add vendor prefixes for StarFive Technology Co. Ltd. and Insignal Ltd

 - Fix some stale doc references

 - Remove stale property-units.txt. Superseded by schema in dt-schema
   repo.

 - Fixes for 'unevaluatedProperties' handling (enabled with experimental
   json-schema support)

 - Drop redundant usage of minItems and maxItems across the tree

 - Update some examples to use bindings with a schema

* tag 'devicetree-for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (83 commits)
  dt-bindings: Fix 'unevaluatedProperties' errors in DT graph users
  dt-bindings: display: renesas,du: Fix 'ports' reference
  dt-bindings: media: adv7180: Add missing video-interfaces.yaml reference
  dt-bindings: crypto: ccree: Convert to json-schema
  dt-bindings: fpga: zynq: convert bindings to YAML
  dt-bindings: rtc: zynqmp: convert bindings to YAML
  dt-bindings: interrupt-controller: Convert ARM VIC to json-schema
  of: of_reserved_mem: mark nomap memory instead of removing
  of: of_reserved_mem: only call memblock_free for normal reserved memory
  dt-bindings: Drop redundant minItems/maxItems
  dt-bindings: spmi: Correct 'reg' schema
  of: reserved-memory: Add stub for RESERVEDMEM_OF_DECLARE()
  dt-bindings: clk: vc5: Fix example
  dt-bindings: timer: renesas,tmu: add r8a779a0 TMU support
  dt-bindings: drm: bridge: adi,adv7511.txt: convert to yaml
  dt-bindings: PCI: ti,am65: Convert PCIe host/endpoint mode dt-bindings to YAML
  of: Remove superfluous casts when printing u64 values
  of: Fix truncation of memory sizes on 32-bit platforms
  dt-bindings: rtc: nxp,pcf8563: Absorb pcf85263/pcf85363 bindings
  dt-bindings: pwm: Use examples with documented/matching schema
  ...

This reverts commit 9ce650a7.

This commit causes watchdog lockups on my machine, and while I have no
idea what the cause is, it bisected right to this commit, and reverting
the change promptly fixes it.

At least occasionally one of the watchdog call traces was

  Call Trace:
    _raw_spin_lock_irqsave+0x35/0x40
    snd_pcm_period_elapsed+0x1b/0xa0 [snd_pcm]
    snd_usb_endpoint_start+0x1a0/0x3c0 [snd_usb_audio]
    start_endpoints+0x23/0x90 [snd_usb_audio]
    snd_usb_substream_playback_trigger+0x7b/0x1a0 [snd_usb_audio]
    snd_pcm_common_ioctl+0x1c44/0x2360 [snd_pcm]
    snd_pcm_ioctl+0x2e/0x40 [snd_pcm]
    __se_sys_ioctl+0x72/0xc0
    do_syscall_64+0x4c/0xa0
    entry_SYSCALL_64_after_hwframe+0x44/0xae

so presumably it's a locking error on that substream spinlock that
snd_pcm_period_elapsed() takes.  But at this point I just want to have a
working system so that I can continue the merge window work tomorrow.

Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull sound updates from Takashi Iwai:
 "As the diffstat scatters over the tree, we've got many tree-wide small
  changes, but also got quite a few intrusive changes in the core side.
  The only ABI-visible core change is the new rawmidi framing mode
  support while others are kernel-internal, mostly code refactoring
  and/or nice improvements.

  Here are some highlights:

  Core:
   - A new framing access mode for rawmidi to get timestamps
   - Cleanup / refactoring of buffer memory management helper code
   - Support for automatic negotiation of ASoC DAI formats
   - Revival of software suspend for PCM and control core, as a
     preliminary work for PCI BAR rescan support

  ASoC:
   - Accessory detection support for several Qualcomm parts
   - Support for IEC958 control with hdmi-codec
   - Merging of Tegra machine drivers into a single driver
   - Support for AmLogic SM1 TOACODEC, Intel AlderLake-M, several NXP
     i.MX8 variants, NXP TFA1 and TDF9897, Rockchip RK817, Qualcomm
     Quinary MI2S, Texas Instruments TAS2505

  USB-audio:
   - Reduction of latency at playback start
   - Code cleanup / fixes of usx2y driver
   - Scarlett2 mixer code fixes and enhancements
   - Quirks for Ozone and Denon devices

  HD-audio:
   - A few quirks for HP and ASUS machines
   - Display power management fixes

  Others:
   - FireWire code refactoring and enhancements
   - Tree-wide trivial coding-style fixes"

* tag 'sound-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (594 commits)
  ALSA: usb-audio: scarlett2: Fix for loop increment in scarlett2_usb_get_config
  ALSA: hda/realtek: fix mute/micmute LEDs for HP ProBook 630 G8
  ALSA: hda/realtek: fix mute/micmute LEDs for HP ProBook 445 G8
  ALSA: hda/realtek: fix mute/micmute LEDs for HP ProBook 450 G8
  ALSA: hda/realtek - Add ALC285 HP init procedure
  ALSA: hda/realtek - Add type for ALC287
  ALSA: scarlett2: Fix scarlett2_*_ctl_put() return values again
  ALSA: scarlett2: Fix pad count for 18i8 Gen 3
  ALSA: hda/realtek: fix mute/micmute LEDs for HP EliteBook 830 G8 Notebook PC
  ALSA: firewire-lib: Fix 'amdtp_domain_start()' when no AMDTP_OUT_STREAM stream is found
  ASoC: qcom: lpass-cpu: mark IRQ_CLEAR register as volatile and readable
  ALSA: hda: Release codec display power during shutdown/reboot
  ALSA: hda: Release controller display power during shutdown/reboot
  ALSA: hda/realtek: Apply LED fixup for HP Dragonfly G1, too
  ASoC: fsl: remove unnecessary oom message
  ASoC: tlv320aic32x4: dt-bindings: add TAS2505 to compatible
  ASoC: tlv320aic32x4: add support for TAS2505
  ASoC: tlv320aic32x4: add type to device private data struct
  ASoC: tegra30: ahub: Use devm_platform_get_and_ioremap_resource()
  ASoC: tegra: tegra210_admaif: Use devm_platform_get_and_ioremap_resource()
  ...

Pull SCSI updates from James Bottomley:
 "This series consists of the usual driver updates (ufs, ibmvfc,
  megaraid_sas, lpfc, elx, mpi3mr, qedi, iscsi, storvsc, mpt3sas) with
  elx and mpi3mr being new drivers.

  The major core change is a rework to drop the status byte handling
  macros and the old bit shifted definitions and the rest of the updates
  are minor fixes"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (287 commits)
  scsi: aha1740: Avoid over-read of sense buffer
  scsi: arcmsr: Avoid over-read of sense buffer
  scsi: ips: Avoid over-read of sense buffer
  scsi: ufs: ufs-mediatek: Add missing of_node_put() in ufs_mtk_probe()
  scsi: elx: libefc: Fix IRQ restore in efc_domain_dispatch_frame()
  scsi: elx: libefc: Fix less than zero comparison of a unsigned int
  scsi: elx: efct: Fix pointer error checking in debugfs init
  scsi: elx: efct: Fix is_originator return code type
  scsi: elx: efct: Fix link error for _bad_cmpxchg
  scsi: elx: efct: Eliminate unnecessary boolean check in efct_hw_command_cancel()
  scsi: elx: efct: Do not use id uninitialized in efct_lio_setup_session()
  scsi: elx: efct: Fix error handling in efct_hw_init()
  scsi: elx: efct: Remove redundant initialization of variable lun
  scsi: elx: efct: Fix spelling mistake "Unexected" -> "Unexpected"
  scsi: lpfc: Fix build error in lpfc_scsi.c
  scsi: target: iscsi: Remove redundant continue statement
  scsi: qla4xxx: Remove redundant continue statement
  scsi: ppa: Switch to use module_parport_driver()
  scsi: imm: Switch to use module_parport_driver()
  scsi: mpt3sas: Fix error return value in _scsih_expander_add()
  ...

Pull xfs updates from Darrick Wong:
 "Most of the work this cycle has been on refactoring various parts of
  the codebase. The biggest non-cleanup changes are (1) reducing the
  number of cache flushes sent when writing the log; (2) a substantial
  number of log recovery fixes; and (3) I started accepting pull
  requests from contributors if the commits in their branches match
  what's been sent to the list.

  For a week or so I /had/ staged a major cleanup of the logging code
  from Dave Chinner, but it exposed so many lurking bugs in other parts
  of the logging and log recovery code that I decided to defer that
  patchset until we can address those latent bugs.

  Larger cleanups this time include walking the incore inode cache (me)
  and rework of the extended attribute code (Allison) to prepare it for
  adding logged xattr updates (and directory tree parent pointers) in
  future releases.

  Summary:

   - Refactor the buffer cache to use bulk page allocation

   - Convert agnumber-based AG iteration to walk per-AG structures

   - Clean up some unit conversions and other code warts

   - Reduce spinlock contention in the directio fastpath

   - Collapse all the inode cache walks into a single function

   - Remove indirect function calls from the inode cache walk code

   - Dramatically reduce the number of cache flushes sent when writing
     log buffers

   - Preserve inode sickness reports for longer

   - Rename xfs_eofblocks since it controls inode cache walks

   - Refactor the extended attribute code to prepare it for the addition
     of log intent items to make xattrs fully transactional

   - A few fixes to earlier large patchsets

   - Log recovery fixes so that we don't accidentally mark the log clean
     when log intent recovery fails

   - Fix some latent SOB errors

   - Clean up shutdown messages that get logged to dmesg

   - Fix a regression in the online shrink code

   - Fix a UAF in the buffer logging code if the fs goes offline

   - Fix uninitialized error variables

   - Fix a UAF in the CIL when commited log item callbacks race with a
     shutdown

   - Fix a bug where the CIL could hang trying to push part of the log
     ring buffer that hasn't been filled yet"

* tag 'xfs-5.14-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (102 commits)
  xfs: don't wait on future iclogs when pushing the CIL
  xfs: Fix a CIL UAF by getting get rid of the iclog callback lock
  xfs: remove callback dequeue loop from xlog_state_do_iclog_callbacks
  xfs: don't nest icloglock inside ic_callback_lock
  xfs: Initialize error in xfs_attr_remove_iter
  xfs: fix endianness issue in xfs_ag_shrink_space
  xfs: remove dead stale buf unpin handling code
  xfs: hold buffer across unpin and potential shutdown processing
  xfs: force the log offline when log intent item recovery fails
  xfs: fix log intent recovery ENOSPC shutdowns when inactivating inodes
  xfs: shorten the shutdown messages to a single line
  xfs: print name of function causing fs shutdown instead of hex pointer
  xfs: fix type mismatches in the inode reclaim functions
  xfs: separate primary inode selection criteria in xfs_iget_cache_hit
  xfs: refactor the inode recycling code
  xfs: add iclog state trace events
  xfs: xfs_log_force_lsn isn't passed a LSN
  xfs: Fix CIL throttle hang when CIL space used going backwards
  xfs: journal IO cache flush reductions
  xfs: remove need_start_rec parameter from xlog_write()
  ...

Pull jfs updates from David Kleikamp:
 "JFS fixes for 5.14"

* tag 'jfs-5.14' of git://github.com/kleikamp/linux-shaggy:
  jfs: Avoid field-overflowing memcpy()
  jfs: remove unnecessary oom message
  jfs: fix GPF in diFree
  fs/jfs: Fix missing error code in lmLogInit()
  jfs: Remove trailing semicolon in macros
  fs: Fix typo issue

Pull configfs updates from Christoph Hellwig:

 - fix a memleak in configfs_release_bin_file (Chung-Chiang Cheng)

 - implement the .read_iter and .write_iter (Bart Van Assche)

 - minor cleanups (Bart Van Assche, me)

* tag 'configfs-5.13' of git://git.infradead.org/users/hch/configfs:
  configfs: simplify configfs_release_bin_file
  configfs: fix memleak in configfs_release_bin_file
  configfs: implement the .read_iter and .write_iter methods
  configfs: drop pointless kerneldoc comments
  configfs: fix the kerneldoc comment for configfs_create_bin_file

Pull dma-mapping updates from Christoph Hellwig:

 - a trivivial whitespace fix (Zhen Lei)

 - report -EEXIST errors in add_dma_entry (Hamza Mahfooz)

* tag 'dma-mapping-5.14' of git://git.infradead.org/users/hch/dma-mapping:
  dma-debug: report -EEXIST errors in add_dma_entry
  dma-mapping: remove a trailing space

Pull iommu updates from Joerg Roedel:

 - SMMU Updates from Will Deacon:

     - SMMUv3:
        - Support stalling faults for platform devices
        - Decrease defaults sizes for the event and PRI queues
     - SMMUv2:
        - Support for a new '->probe_finalize' hook, needed by Nvidia
        - Even more Qualcomm compatible strings
        - Avoid Adreno TTBR1 quirk for DB820C platform

 - Intel VT-d updates from Lu Baolu:

     - Convert Intel IOMMU to use sva_lib helpers in iommu core
     - ftrace and debugfs supports for page fault handling
     - Support asynchronous nested capabilities
     - Various misc cleanups

 - Support for new VIOT ACPI table to make the VirtIO IOMMU
   available on x86

 - Add the amd_iommu=force_enable command line option to enable
   the IOMMU on platforms where they are known to cause problems

 - Support for version 2 of the Rockchip IOMMU

 - Various smaller fixes, cleanups and refactorings

* tag 'iommu-updates-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (66 commits)
  iommu/virtio: Enable x86 support
  iommu/dma: Pass address limit rather than size to iommu_setup_dma_ops()
  ACPI: Add driver for the VIOT table
  ACPI: Move IOMMU setup code out of IORT
  ACPI: arm64: Move DMA setup operations out of IORT
  iommu/vt-d: Fix dereference of pointer info before it is null checked
  iommu: Update "iommu.strict" documentation
  iommu/arm-smmu: Check smmu->impl pointer before dereferencing
  iommu/arm-smmu-v3: Remove unnecessary oom message
  iommu/arm-smmu: Fix arm_smmu_device refcount leak in address translation
  iommu/arm-smmu: Fix arm_smmu_device refcount leak when arm_smmu_rpm_get fails
  iommu/vt-d: Fix linker error on 32-bit
  iommu/vt-d: No need to typecast
  iommu/vt-d: Define counter explicitly as unsigned int
  iommu/vt-d: Remove unnecessary braces
  iommu/vt-d: Removed unused iommu_count in dmar domain
  iommu/vt-d: Use bitfields for DMAR capabilities
  iommu/vt-d: Use DEVICE_ATTR_RO macro
  iommu/vt-d: Fix out-bounds-warning in intel/svm.c
  iommu/vt-d: Add PRQ handling latency sampling
  ...

Merge tag 'linux-kselftest-next-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest update from Shuah Khan:
 "Fixes to existing tests and framework:

   - migrate sgx test to kselftest harness

   - add new test cases to sgx test

   - ftrace test fix event-no-pid on 1-core machine

   - splice test adjust for handler fallback removal"

* tag 'linux-kselftest-next-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/sgx: remove checks for file execute permissions
  selftests/ftrace: fix event-no-pid on 1-core machine
  selftests/sgx: Refine the test enclave to have storage
  selftests/sgx: Add EXPECT_EEXIT() macro
  selftests/sgx: Dump enclave memory map
  selftests/sgx: Migrate to kselftest harness
  selftests/sgx: Rename 'eenter' and 'sgx_call_vdso'
  selftests: timers: rtcpie: skip test if default RTC device does not exist
  selftests: lib.mk: Also install "config" and "settings"
  selftests: splice: Adjust for handler fallback removal
  selftests/tls: Add {} to avoid static checker warning
  selftests/resctrl: Fix incorrect parsing of option "-t"

Merge tag 'linux-kselftest-kunit-fixes-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull KUnit update from Shuah Khan:
 "Fixes and features:

   - add support for skipped tests

   - introduce kunit_kmalloc_array/kunit_kcalloc() helpers

   - add gnu_printf specifiers

   - add kunit_shutdown

   - add unit test for filtering suites by names

   - convert lib/test_list_sort.c to use KUnit

   - code organization moving default config to tools/testing/kunit

   - refactor of internal parser input handling

   - cleanups and updates to documentation

   - code cleanup related to casts"

* tag 'linux-kselftest-kunit-fixes-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (29 commits)
  kunit: add unit test for filtering suites by names
  kasan: test: make use of kunit_skip()
  kunit: test: Add example tests which are always skipped
  kunit: tool: Support skipped tests in kunit_tool
  kunit: Support skipped tests
  thunderbolt: test: Reinstate a few casts of bitfields
  kunit: tool: internal refactor of parser input handling
  lib/test: convert lib/test_list_sort.c to use KUnit
  kunit: introduce kunit_kmalloc_array/kunit_kcalloc() helpers
  kunit: Remove the unused all_tests.config
  kunit: Move default config from arch/um -> tools/testing/kunit
  kunit: arch/um/configs: Enable KUNIT_ALL_TESTS by default
  kunit: Add gnu_printf specifiers
  lib/cmdline_kunit: Remove a cast which are no-longer required
  kernel/sysctl-test: Remove some casts which are no-longer required
  thunderbolt: test: Remove some casts which are no longer required
  mmc: sdhci-of-aspeed: Remove some unnecessary casts from KUnit tests
  iio: Remove a cast in iio-test-format which is no longer required
  device property: Remove some casts in property-entry-test
  Documentation: kunit: Clean up some string casts in examples
  ...

Pull powerpc updates from Michael Ellerman:

 - A big series refactoring parts of our KVM code, and converting some
   to C.

 - Support for ARCH_HAS_SET_MEMORY, and ARCH_HAS_STRICT_MODULE_RWX on
   some CPUs.

 - Support for the Microwatt soft-core.

 - Optimisations to our interrupt return path on 64-bit.

 - Support for userspace access to the NX GZIP accelerator on PowerVM on
   Power10.

 - Enable KUAP and KUEP by default on 32-bit Book3S CPUs.

 - Other smaller features, fixes & cleanups.

Thanks to: Andy Shevchenko, Aneesh Kumar K.V, Arnd Bergmann, Athira
Rajeev, Baokun Li, Benjamin Herrenschmidt, Bharata B Rao, Christophe
Leroy, Daniel Axtens, Daniel Henrique Barboza, Finn Thain, Geoff Levand,
Haren Myneni, Jason Wang, Jiapeng Chong, Joel Stanley, Jordan Niethe,
Kajol Jain, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas
Piggin, Nick Desaulniers, Paul Mackerras, Russell Currey, Sathvika
Vasireddy, Shaokun Zhang, Stephen Rothwell, Sudeep Holla, Suraj Jitindar
Singh, Tom Rix, Vaibhav Jain, YueHaibing, Zhang Jianhua, and Zhen Lei.

* tag 'powerpc-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (218 commits)
  powerpc: Only build restart_table.c for 64s
  powerpc/64s: move ret_from_fork etc above __end_soft_masked
  powerpc/64s/interrupt: clean up interrupt return labels
  powerpc/64/interrupt: add missing kprobe annotations on interrupt exit symbols
  powerpc/64: enable MSR[EE] in irq replay pt_regs
  powerpc/64s/interrupt: preserve regs->softe for NMI interrupts
  powerpc/64s: add a table of implicit soft-masked addresses
  powerpc/64e: remove implicit soft-masking and interrupt exit restart logic
  powerpc/64e: fix CONFIG_RELOCATABLE build warnings
  powerpc/64s: fix hash page fault interrupt handler
  powerpc/4xx: Fix setup_kuep() on SMP
  powerpc/32s: Fix setup_{kuap/kuep}() on SMP
  powerpc/interrupt: Use names in check_return_regs_valid()
  powerpc/interrupt: Also use exit_must_hard_disable() on PPC32
  powerpc/sysfs: Replace sizeof(arr)/sizeof(arr[0]) with ARRAY_SIZE
  powerpc/ptrace: Refactor regs_set_return_{msr/ip}
  powerpc/ptrace: Move set_return_regs_changed() before regs_set_return_{msr/ip}
  powerpc/stacktrace: Fix spurious "stale" traces in raise_backtrace_ipi()
  powerpc/pseries/vas: Include irqdomain.h
  powerpc: mark local variables around longjmp as volatile
  ...

Merge tag 'asm-generic-unaligned-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull asm/unaligned.h unification from Arnd Bergmann:
 "Unify asm/unaligned.h around struct helper

  The get_unaligned()/put_unaligned() helpers are traditionally
  architecture specific, with the two main variants being the
  "access-ok.h" version that assumes unaligned pointer accesses always
  work on a particular architecture, and the "le-struct.h" version that
  casts the data to a byte aligned type before dereferencing, for
  architectures that cannot always do unaligned accesses in hardware.

  Based on the discussion linked below, it appears that the access-ok
  version is not realiable on any architecture, but the struct version
  probably has no downsides. This series changes the code to use the
  same implementation on all architectures, addressing the few
  exceptions separately"

Link: https://lore.kernel.org/lkml/75d07691-1e4f-741f-9852-38c0b4f520bc@synopsys.com/
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=100363
Link: https://lore.kernel.org/lkml/20210507220813.365382-14-arnd@kernel.org/
Link: git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic.git unaligned-rework-v2
Link: https://lore.kernel.org/lkml/CAHk-=whGObOKruA_bU3aPGZfoDqZM1_9wBkwREp0H0FgR-90uQ@mail.gmail.com/

* tag 'asm-generic-unaligned-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  asm-generic: simplify asm/unaligned.h
  asm-generic: uaccess: 1-byte access is always aligned
  netpoll: avoid put_unaligned() on single character
  mwifiex: re-fix for unaligned accesses
  apparmor: use get_unaligned() only for multi-byte words
  partitions: msdos: fix one-byte get_unaligned()
  asm-generic: unaligned always use struct helpers
  asm-generic: unaligned: remove byteshift helpers
  powerpc: use linux/unaligned/le_struct.h on LE power7
  m68k: select CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
  sh: remove unaligned access for sh4a
  openrisc: always use unaligned-struct header
  asm-generic: use asm-generic/unaligned.h for most architectures

Merge tag 'perf-tools-for-v5.14-2021-07-01' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tool updates from Arnaldo Carvalho de Melo:
 "Tools:

   - Add cgroup support for 'perf top' (-G).

   - Add support for KVM MSRs in 'perf kvm stat'

   - Support probes on init functions in 'perf probe', to support the
     bootconfig format.

   - Improve error reporting in 'perf probe'.

   - No need to synthesize BUILD_ID records in 'perf inject' if the
     MMAP2 records have build ids already.

   - Allow toggling source code ('s' hotkey) in 'perf annotate' in all
     lines.

   - Add itrace options support to 'perf annotate'.

   - Support to custom DSO filters for 'perf script'.

  Hardware enablement:

   - Support the HYBRID_TOPOLOGY and HYBRID_CPU_PMU_CAPS features in the
     perf.data file header.

   - Support PMU prefix for mem-load and mem-store events, to support
     hybrid (BIG little) CPUs such as Intel's Alderlake.

   - Support hybrid CPUs in 'perf mem' and 'perf c2c'.

  Hardware tracing:

   - Intel PT now supports tracing KVM guests.

   - Timestamp improvements for ARM's Coresight.

  Build:

   - Add 'make -C tools/perf build-test' entries for
     libopencsd/CORESIGHT=1 and libbpf/LIBBPF_DYNAMIC=1.

   - Use bison's --file-prefix-map option to avoid storing full paths
     when using O= in the perf build.

  Tests:

   - Improve the 'perf test' entries for libpfm4 and BPF counters.

  Misc:

   - Sync msr-index.h, mount.h, kvm headers with the kernel originals.

   - Add vendor events and metrics for Intel's Icelake Server & Client"

* tag 'perf-tools-for-v5.14-2021-07-01' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (123 commits)
  perf session: Add missing evlist__delete when deleting a session
  perf annotate: Allow 's' on source code lines
  perf dlfilter: Add object_code() to perf_dlfilter_fns
  perf dlfilter: Add attr() to perf_dlfilter_fns
  perf dlfilter: Add srcline() to perf_dlfilter_fns
  perf dlfilter: Add insn() to perf_dlfilter_fns
  perf dlfilter: Add resolve_address() to perf_dlfilter_fns
  perf build: Install perf_dlfilter.h
  perf script: Add option to pass arguments to dlfilters
  perf script: Add option to list dlfilters
  perf script: Add dlfilter__filter_event_early()
  perf script: Add API for filtering via dynamically loaded shared object
  perf llvm: Return -ENOMEM when asprintf() fails
  perf cs-etm: Delay decode of non-timeless data until cs_etm__flush_events()
  tools headers UAPI: Synch KVM's svm.h header with the kernel
  tools kvm headers arm64: Update KVM headers from the kernel sources
  tools headers UAPI: Sync linux/kvm.h with the kernel sources
  tools headers cpufeatures: Sync with the kernel sources
  tools include UAPI: Update linux/mount.h copy
  tools arch x86: Sync the msr-index.h copy with the kernel sources
  ...

Merge more updates from Andrew Morton:
 "190 patches.

  Subsystems affected by this patch series: mm (hugetlb, userfaultfd,
  vmscan, kconfig, proc, z3fold, zbud, ras, mempolicy, memblock,
  migration, thp, nommu, kconfig, madvise, memory-hotplug, zswap,
  zsmalloc, zram, cleanups, kfence, and hmm), procfs, sysctl, misc,
  core-kernel, lib, lz4, checkpatch, init, kprobes, nilfs2, hfs,
  signals, exec, kcov, selftests, compress/decompress, and ipc"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (190 commits)
  ipc/util.c: use binary search for max_idx
  ipc/sem.c: use READ_ONCE()/WRITE_ONCE() for use_global_lock
  ipc: use kmalloc for msg_queue and shmid_kernel
  ipc sem: use kvmalloc for sem_undo allocation
  lib/decompressors: remove set but not used variabled 'level'
  selftests/vm/pkeys: exercise x86 XSAVE init state
  selftests/vm/pkeys: refill shadow register after implicit kernel write
  selftests/vm/pkeys: handle negative sys_pkey_alloc() return code
  selftests/vm/pkeys: fix alloc_random_pkey() to make it really, really random
  kcov: add __no_sanitize_coverage to fix noinstr for all architectures
  exec: remove checks in __register_bimfmt()
  x86: signal: don't do sas_ss_reset() until we are certain that sigframe won't be abandoned
  hfsplus: report create_date to kstat.btime
  hfsplus: remove unnecessary oom message
  nilfs2: remove redundant continue statement in a while-loop
  kprobes: remove duplicated strong free_insn_page in x86 and s390
  init: print out unknown kernel parameters
  checkpatch: do not complain about positive return values starting with EPOLL
  checkpatch: improve the indented label test
  checkpatch: scripts/spdxcheck.py now requires python3
  ...

The comment from the i801 driver is valid here, too, so copy it.
Reported-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Prior to commit 1538d82f ("i2c: mpc: Interrupt driven transfer") the
old interrupt handler would reread MPC_I2C_SR after checking the CSR_MIF
bit. When the driver was re-written this was removed as it seemed
unnecessary. However as it turns out this is necessary for i2c devices
which do clock stretching otherwise we end up thinking the bus is still
busy when processing the interrupt.

Fixes: 1538d82f ("i2c: mpc: Interrupt driven transfer")
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Pull cgroup updates from Tejun Heo:

 - cgroup.kill is added which implements atomic killing of the whole
   subtree.

   Down the line, this should be able to replace the multiple userland
   implementations of "keep killing till empty".

 - PSI can now be turned off at boot time to avoid overhead for
   configurations which don't care about PSI.

* 'for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: make per-cgroup pressure stall tracking configurable
  cgroup: Fix kernel-doc
  cgroup: inline cgroup_task_freeze()
  tests/cgroup: test cgroup.kill
  tests/cgroup: move cg_wait_for(), cg_prepare_for_wait()
  tests/cgroup: use cgroup.kill in cg_killall()
  docs/cgroup: add entry for cgroup.kill
  cgroup: introduce cgroup.kill

Pull percpu updates from Dennis Zhou:

 - percpu chunk depopulation - depopulate backing pages for chunks with
   empty pages when we exceed a global threshold without those pages.
   This lets us reclaim a portion of memory that would previously be
   lost until the full chunk would be freed (possibly never).

 - memcg accounting cleanup - previously separate chunks were managed
   for normal allocations and __GFP_ACCOUNT allocations. These are now
   consolidated which cleans up the code quite a bit.

 - a few misc clean ups for clang warnings

* 'for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
  percpu: optimize locking in pcpu_balance_workfn()
  percpu: initialize best_upa variable
  percpu: rework memcg accounting
  mm, memcg: introduce mem_cgroup_kmem_disabled()
  mm, memcg: mark cgroup_memory_nosocket, nokmem and noswap as __ro_after_init
  percpu: make symbol 'pcpu_free_slot' static
  percpu: implement partial chunk depopulation
  percpu: use pcpu_free_slot instead of pcpu_nr_slots - 1
  percpu: factor out pcpu_check_block_hint()
  percpu: split __pcpu_balance_workfn()
  percpu: fix a comment about the chunks ordering

Pull MIPS updates from Thomas Bogendoerfer:

 - add support for OpeneEmbed SOM9331 board

 - Ingenic fixes/improvments

 - other fixes and cleanups

* tag 'mips_5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (39 commits)
  MIPS: Fix PKMAP with 32-bit MIPS huge page support
  MIPS: CI20: Add second percpu timer for SMP.
  MIPS: CI20: Reduce clocksource to 750 kHz.
  MIPS: Ingenic: Add MAC syscon nodes for Ingenic SoCs.
  dt-bindings: clock: Add documentation for MAC PHY control bindings.
  MIPS: X1830: Respect cell count of common properties.
  MIPS: set mips32r5 for virt extensions
  MIPS: loongsoon64: Reserve memory below starting pfn to prevent Oops
  MIPS: MT extensions are not available on MIPS32r1
  mips/kvm: Use BUG_ON instead of if condition followed by BUG
  MIPS: OCTEON: octeon-usb: Use devm_platform_get_and_ioremap_resource()
  MIPS: add PMD table accounting into MIPS'pmd_alloc_one
  MIPS: Loongson64: fix spelling of SPDX tag
  MIPS: ingenic: rs90: Add dedicated VRAM memory region
  MIPS: ingenic: gcw0: Set codec to cap-less mode for FM radio
  MIPS: ingenic: jz4780: Fix I2C nodes to match DT doc
  MIPS: ingenic: Select CPU_SUPPORTS_CPUFREQ && MIPS_EXTERNAL_TIMER
  MIPS: Kconfig: ingenic: Ensure MACH_INGENIC_GENERIC selects all SoCs
  MIPS: cpu-probe: Fix FPU detection on Ingenic JZ4760(B)
  MIPS: boot: Support specifying UART port on Ingenic SoCs
  ...

Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control changes for the v5.14 kernel. Not so
  much going on. No core changes, just drivers.

  The most interesting would be that MIPS Ralink is migrating to pin
  control and we have some bindings but not yet code for the Apple M1
  pin controller.

  New drivers:

   - Last merge window we created a driver for the Ralink RT2880. We are
     now moving the Ralink SoC pin control drivers out of the MIPS
     architecture code and into the pin control subsystem. This concerns
     RT288X, MT7620, RT305X, RT3883 and MT7621.

   - Qualcomm SM6125 SoC pin control driver.

   - Qualcomm spmi-gpio support for PM7325.

   - Qualcomm spmi-mpp also handles PMI8994 (just a compatible string)

   - Mediatek MT8365 SoC pin controller.

   - New device HID for the AMD GPIO controller.

  Improvements:

   - Pin bias config support for a slew of Renesas pin controllers.

   - Incremental improvements and non-urgent bug fixes to the Renesas
     SoC drivers.

   - Implement irq_set_wake on the AMD pin controller so we can wake up
     from external pin events.

  Misc:

   - Devicetree bindings for the Apple M1 pin controller, we will
     probably see a proper driver for this soon as well"

* tag 'pinctrl-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (54 commits)
  pinctrl: ralink: rt305x: add missing include
  pinctrl: stm32: check for IRQ MUX validity during alloc()
  pinctrl: zynqmp: some code cleanups
  drivers: qcom: pinctrl: Add pinctrl driver for sm6125
  dt-bindings: pinctrl: qcom: sm6125: Document SM6125 pinctrl driver
  dt-bindings: pinctrl: mcp23s08: add documentation for reset-gpios
  pinctrl: mcp23s08: Add optional reset GPIO
  pinctrl: mediatek: fix mode encoding
  pinctrl: mcp23s08: Fix missing unlock on error in mcp23s08_irq()
  pinctrl: bcm: Constify static pinmux_ops
  pinctrl: bcm: Constify static pinctrl_ops
  pinctrl: ralink: move RT288X SoC pinmux config into a new 'pinctrl-rt288x.c' file
  pinctrl: ralink: move MT7620 SoC pinmux config into a new 'pinctrl-mt7620.c' file
  pinctrl: ralink: move RT305X SoC pinmux config into a new 'pinctrl-rt305x.c' file
  pinctrl: ralink: move RT3883 SoC pinmux config into a new 'pinctrl-rt3883.c' file
  pinctrl: ralink: move MT7621 SoC pinmux config into a new 'pinctrl-mt7621.c' file
  pinctrl: ralink: move ralink architecture pinmux header into the driver
  pinctrl: single: config: enable the pin's input
  pinctrl: mtk: Fix mt8365 Kconfig dependency
  pinctrl: mcp23s08: fix race condition in irq handler
  ...

Pull rdma updates from Jason Gunthorpe:
 "This contains a replacement driver for Intel iWarp hardware. This new
  driver supports the old ethernet hardware and also newer chips that
  can do ROCE.

  Other than that, this contains the typical mix of patches:

   - Driver updates and cleanups for bnxt_re, cxgb4, mlx4, and mlx5

   - Many static checker driven code clean ups, including a wide
     refcount_t conversion

   - Several series for the hns driver, more HIP09 HW capabilities,
     migration to new HW register manipulators, and code cleanups

   - Minor fixes and improvements in srp, rts, and cm

   - Improvements throughout for sysfs related code to use
     DEVICE_ATTR_*, make the ib_port sysfs first-class, and overall use
     sysfs APIs properly

   - Intel's new irdma driver replacing i40iw

   - rxe general clean ups and Memory Window support"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (211 commits)
  RDMA/core: Always release restrack object
  RDMA/mlx5: Don't access NULL-cleared mpi pointer
  RDMA/irdma: Fix potential overflow expression in irdma_prm_get_pbles
  RDMA/irdma: Check contents of user-space irdma_mem_reg_req object
  RDMA/rxe: Missing unlock on error in get_srq_wqe()
  RDMA/cma: Fix rdma_resolve_route() memory leak
  RDMA/core/sa_query: Remove unused argument
  RDMA/cma: Fix incorrect Packet Lifetime calculation
  RDMA/cma: Protect RMW with qp_mutex
  RDMA/cma: Remove unnecessary INIT->INIT transition
  RDMA/hns: Add window selection field of congestion control
  RDMA/hfi1: Remove use of kmap()
  RDMA/irdma: Remove use of kmap()
  RDMA/bnxt_re: Fix uninitialized struct bit field rsvd1
  IB/isert: Align target max I/O size to initiator size
  RDMA/hns: Fix incorrect vlan enable bit in QPC
  MAINTAINERS: Update Broadcom RDMA maintainers
  RDMA/irdma: Use the queried port attributes
  RDMA/rxe: Fix redundant skb_put_zero
  RDMA/rxe: Fix extra copy in prepare_ack_packet
  ...

Pull clk updates from Stephen Boyd:
 "This round has a diffstat dominated by Qualcomm clk drivers. Honestly
  though that's just a bunch of data so the diffstat reflects that.
  Looking beyond that there's just a bunch of updates all around in
  various clk drivers. Renesas and NXP (for i.MX) are two SoC vendors
  that have a lot of patches in here.

  Overall the driver changes look to be mostly enabling more clks and
  non-critical fixes that we could hold until the next merge window.

  I'm especially excited about the series from Arnd that graduates
  clkdev to be the only implementation of clk_get() and clk_put().
  That's a good step in the right direction to migreate eveerything over
  to the common clk framework. Now we don't have to worry about clkdev
  specific details, they're just part of the clk API now.

  Core:
   - clkdev is now the only option, i.e. clk_get()/clk_put() is
     implemented in only one place in the kernel instead of in
     drivers/clk/clkdev.c and in architectures that want their own
     implementation

  New Drivers:
   - Texas Instruments' LMK04832 Ultra Low-Noise JESD204B Compliant
     Clock Jitter Cleaner With Dual Loop PLLs
   - Qualcomm MDM9607 GCC
   - Qualcomm SC8180X display clks
   - Qualcomm SM6125 GCC
   - Qualcomm SM8250 CAMCC (camera)
   - Renesas RZ/G2L SoC
   - Hisilicon hi3559A SoC

  Updates:
   - Stop using clock-output-names in ST clk drivers (yay!)
   - Support secure mode of STM32MP1 SoCs
   - Improve clock support for Actions S500 SoC
   - duty cycle setting support on qcom clks
   - Add TI am33xx spread spectrum clock support
   - Use determine_rate() for the Amlogic pll ops instead of
     round_rate()
   - Restrict Amlogic gp0/1 and audio plls range on g12a/sm1
   - Improve Amlogic axg-audio controller error on deferral
   - Add NNA clocks on Amlogic g12a
   - Reduce memory footprint of Rockchip PLL rate tables
   - A fix for the newly added Rockchip rk3568 clk driver
   - Exported clock for the newly added Rockchip video decoder
   - Remove audio ipg clock from i.MX8MP
   - Remove deprecated legacy clock binding for i.MX SCU clock driver
   - Use common clk-imx8qxp for both i.MX8QXP and i.MX8QM
   - Add multiple clocks to clk-imx8qxp driver (enet, hdmi, lcdif,
     audio, parallel interface)
   - Add dedicated clock ops for i.MX paralel interface
   - Different fixes for clocks controlled by ATF on i.MX SoCs
   - Add A53/A72 frequency scaling support i.MX clk-scu driver
   - Add special case for DCSS clock on suspend for i.MX clk-scu driver
   - Add parent save/restore on suspend/resume to i.MX clk-scu driver
   - Skip runtime PM enablement for CPU clocks in i.MX clk-scu driver
   - Remove the sys1_pll/sys2_pll clock gates for i.MX8MQ and their
     bindings
   - Tegra clk driver no longer deasserts resets on clk_enable as it
     gets in the way of certain power-up sequences
   - Fix compile testing for Tegra clk driver
   - One patch to fix a divider on the Allwinner v3s Audio PLL
   - Add support for CPU core clock boost modes on Renesas R-Car Gen3
   - Add ISPCS (Image Signal Processor) clocks on Renesas R-Car V3U
   - Switch SH/R-Mobile and R-Car "DIV6" clocks to .determine_rate() and
     improve support for multiple parents
   - Switch Renesas RZ/N1 divider clocks to .determine_rate()
   - Add ZA2 (Audio Clock Generator) clock on Renesas R-Car D3
   - Convert ar7 to common clk framework
   - Convert ralink to common clk framework"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (161 commits)
  clk: zynqmp: Handle divider specific read only flag
  clk: zynqmp: Use firmware specific mux clock flags
  clk: zynqmp: Use firmware specific divider clock flags
  clk: zynqmp: Use firmware specific common clock flags
  clk: lmk04832: Use of match table
  clk: lmk04832: Depend on SPI
  clk: stm32mp1: new compatible for secure RCC support
  dt-bindings: clock: stm32mp1 new compatible for secure rcc
  dt-bindings: reset: add MCU HOLD BOOT ID for SCMI reset domains on stm32mp15
  dt-bindings: reset: add IDs for SCMI reset domains on stm32mp15
  dt-bindings: clock: add IDs for SCMI clocks on stm32mp15
  reset: stm32mp1: remove stm32mp1 reset
  clk: hisilicon: Add clock driver for hi3559A SoC
  dt-bindings: Document the hi3559a clock bindings
  clk: si5341: Add sysfs properties to allow checking/resetting device faults
  clk: si5341: Add silabs,iovdd-33 property
  clk: si5341: Add silabs,xaxb-ext-clk property
  clk: si5341: Allow different output VDD_SEL values
  clk: si5341: Update initialization magic
  clk: si5341: Check for input clock presence and PLL lock on startup
  ...

Pull drm updates from Dave Airlie:
 "Highlights:

   - AMD enables two more GPUs, with resulting header files

   - i915 has started to move to TTM for discrete GPU and enable DG1
     discrete GPU support (not by default yet)

   - new HyperV drm driver

   - vmwgfx adds arm64 support

   - TTM refactoring ongoing

   - 16bpc display support for AMD hw

  Otherwise it's just the usual insane amounts of work all over the
  place in lots of drivers and the core, as mostly summarised below:

  Core:
   - mark AGP ioctls as legacy
   - disable force probing for non-master clients
   - HDR metadata property helpers
   - HDMI infoframe signal colorimetry support
   - remove drm_device.pdev pointer
   - remove DRM_KMS_FB_HELPER config option
   - remove drm_pci_alloc/free
   - drm_err_*/drm_dbg_* helpers
   - use drm driver names for fbdev
   - leaked DMA handle fix
   - 16bpc fixed point format fourcc
   - add prefetching memcpy for WC
   - Documentation fixes

  aperture:
   - add aperture ownership helpers

  dp:
   - aux fixes
   - downstream 0 port handling
   - use extended base receiver capability DPCD
   - Rename DP_PSR_SELECTIVE_UPDATE to better mach eDP spec
   - mst: use khz as link rate during init
   - VCPI fixes for StarTech hub

  ttm:
   - provide tt_shrink file via debugfs
   - warn about freeing pinned BOs
   - fix swapping error handling
   - move page alignment into BO
   - cleanup ttm_agp_backend
   - add ttm_sys_manager
   - don't override vm_ops
   - ttm_bo_mmap removed
   - make ttm_resource base of all managers
   - remove VM_MIXEDMAP usage

  panel:
   - sysfs_emit support
   - simple: runtime PM support
   - simple: power up panel when reading EDID + caching

  bridge:
   - MHDP8546: HDCP support + DT bindings
   - MHDP8546: Register DP AUX channel with userspace
   - TI SN65DSI83 + SN65DSI84: add driver
   - Sil8620: Fix module dependencies
   - dw-hdmi: make CEC driver loading optional
   - Ti-sn65dsi86: refclk fixes, subdrivers, runtime pm
   - It66121: Add driver + DT bindings
   - Adv7511: Support I2S IEC958 encoding
   - Anx7625: fix power-on delay
   - Nwi-dsi: Modesetting fixes; Cleanups
   - lt6911: add missing MODULE_DEVICE_TABLE
   - cdns: fix PM reference leak

  hyperv:
   - add new DRM driver for HyperV graphics

  efifb:
   - non-PCI device handling fixes

  i915:
   - refactor IP/device versioning
   - XeLPD Display IP preperation work
   - ADL-P enablement patches
   - DG1 uAPI behind BROKEN
   - disable mmap ioctl for discerte GPUs
   - start enabling HuC loading for Gen12+
   - major GuC backend rework for new platforms
   - initial TTM support for Discrete GPUs
   - locking rework for TTM prep
   - use correct max source link rate for eDP
   - %p4cc format printing
   - GLK display fixes
   - VLV DSI panel power fixes
   - PSR2 disabled for RKL and ADL-S
   - ACPI _DSM invalid access fixed
   - DMC FW path abstraction
   - ADL-S PCI ID update
   - uAPI headers converted to kerneldoc
   - initial LMEM support for DG1
   - x86/gpu: add Jasperlake to gen11 early quirks

  amdgpu:
   - Aldebaran updates + initial SR-IOV
   - new GPU: Beige Goby and Yellow Carp support
   - more LTTPR display work
   - Vangogh updates
   - SDMA 5.x GCR fixes
   - PCIe ASPM support
   - Renoir TMZ enablement
   - initial multiple eDP panel support
   - use fdinfo to track devices/process info
   - pin/unpin TTM fixes
   - free resource on fence usage query
   - fix fence calculation
   - fix hotunplug/suspend issues
   - GC/MM register access macro cleanup for SR-IOV
   - W=1 fixes
   - ACPI ATCS/ATIF handling rework
   - 16bpc fixed point format support
   - Initial smartshift support
   - RV/PCO power tuning fixes
   - new INFO query for additional vbios info

  amdkfd:
   - SR-IOV aldebaran support
   - HMM SVM support

  radeon:
   - SMU regression fixes
   - Oland flickering fix

  vmwgfx:
   - enable console with fbdev emulation
   - fix cpu updates of coherent multisample surfaces
   - remove reservation semaphore
   - add initial SVGA3 support
   - support arm64

  msm:
   - devcoredump support for display errors
   - dpu/dsi: yaml bindings conversion
   - mdp5: alpha/blend_mode/zpos support
   - a6xx: cached coherent buffer support
   - gpu iova fault improvement
   - a660 support

  rockchip:
   - RK3036 win1 scaling support
   - RK3066/3188 missing register support
   - RK3036/3066/3126/3188 alpha support

  mediatek:
   - MT8167 HDMI support
   - MT8183 DPI dual edge support

  tegra:
   - fixed YUV support/scaling on Tegra186+

  ast:
   - use pcim_iomap
   - fix DP501 EDID

  bochs:
   - screen blanking support

  etnaviv:
   - export more GPU ID values to userspace
   - add HWDB entry for GPU on i.MX8MP
   - rework linear window calcs

  exynos:
   - pm runtime changes

  imx:
   - Annotate dma_fence critical section
   - fix PRG modifiers after drmm conversion
   - Add 8 pixel alignment fix for 1366x768
   - fix YUV advertising
   - add color properties

  ingenic:
   - IPU planes fix

  panfrost:
   - Mediatek MT8183 support + DT bindings
   - export AFBC_FEATURES register to userspace

  simpledrm:
   - %pr for printing resources

  nouveau:
   - pin/unpin TTM fixes

  qxl:
   - unpin shadow BO

  virtio:
   - create dumb BOs as guest blob

  vkms:
   - drmm_universal_plane_alloc
   - add XRGB plane composition
   - overlay support"

* tag 'drm-next-2021-07-01' of git://anongit.freedesktop.org/drm/drm: (1570 commits)
  drm/i915: Reinstate the mmap ioctl for some platforms
  drm/i915/dsc: abstract helpers to get bigjoiner primary/secondary crtc
  Revert "drm/msm/mdp5: provide dynamic bandwidth management"
  drm/msm/mdp5: provide dynamic bandwidth management
  drm/msm/mdp5: add perf blocks for holding fudge factors
  drm/msm/mdp5: switch to standard zpos property
  drm/msm/mdp5: add support for alpha/blend_mode properties
  drm/msm/mdp5: use drm_plane_state for pixel blend mode
  drm/msm/mdp5: use drm_plane_state for storing alpha value
  drm/msm/mdp5: use drm atomic helpers to handle base drm plane state
  drm/msm/dsi: do not enable PHYs when called for the slave DSI interface
  drm/msm: Add debugfs to trigger shrinker
  drm/msm/dpu: Avoid ABBA deadlock between IRQ modules
  drm/msm: devcoredump iommu fault support
  iommu/arm-smmu-qcom: Add stall support
  drm/msm: Improve the a6xx page fault handler
  iommu/arm-smmu-qcom: Add an adreno-smmu-priv callback to get pagefault info
  iommu/arm-smmu: Add support for driver IOMMU fault handlers
  drm/msm: export hangcheck_period in debugfs
  drm/msm/a6xx: add support for Adreno 660 GPU
  ...

Pull io_uring updates from Jens Axboe:

 - Multi-queue iopoll improvement (Fam)

 - Allow configurable io-wq CPU masks (me)

 - renameat/linkat tightening (me)

 - poll re-arm improvement (Olivier)

 - SQPOLL race fix (Olivier)

 - Cancelation unification (Pavel)

 - SQPOLL cleanups (Pavel)

 - Enable file backed buffers for shmem/memfd (Pavel)

 - A ton of cleanups and performance improvements (Pavel)

 - Followup and misc fixes (Colin, Fam, Hao, Olivier)

* tag 'for-5.14/io_uring-2021-06-30' of git://git.kernel.dk/linux-block: (83 commits)
  io_uring: code clean for kiocb_done()
  io_uring: spin in iopoll() only when reqs are in a single queue
  io_uring: pre-initialise some of req fields
  io_uring: refactor io_submit_flush_completions
  io_uring: optimise hot path restricted checks
  io_uring: remove not needed PF_EXITING check
  io_uring: mainstream sqpoll task_work running
  io_uring: refactor io_arm_poll_handler()
  io_uring: reduce latency by reissueing the operation
  io_uring: add IOPOLL and reserved field checks to IORING_OP_UNLINKAT
  io_uring: add IOPOLL and reserved field checks to IORING_OP_RENAMEAT
  io_uring: refactor io_openat2()
  io_uring: simplify struct io_uring_sqe layout
  io_uring: update sqe layout build checks
  io_uring: fix code style problems
  io_uring: refactor io_sq_thread()
  io_uring: don't change sqpoll creds if not needed
  io_uring: Create define to modify a SQPOLL parameter
  io_uring: Fix race condition when sqp thread goes to sleep
  io_uring: improve in tctx_task_work() resubmission
  ...

ASan reports a memory leak caused by evlist not being deleted on exit in
perf-report, perf-script and perf-data.
The problem is caused by evlist->session not being deleted, which is
allocated in perf_session__read_header, called in perf_session__new if
perf_data is in read mode.
In case of write mode, the session->evlist is filled by the caller.
This patch solves the problem by calling evlist__delete in
perf_session__delete if perf_data is in read mode.

Changes in v2:
 - call evlist__delete from within perf_session__delete

v1: https://lore.kernel.org/lkml/20210621234317.235545-1-rickyman7@gmail.com/

ASan report follows:

$ ./perf script report flamegraph
=================================================================
==227640==ERROR: LeakSanitizer: detected memory leaks

<SNIP unrelated>

Indirect leak of 2704 byte(s) in 1 object(s) allocated from:
    #0 0x4f4137 in calloc (/home/user/linux/tools/perf/perf+0x4f4137)
    #1 0xbe3d56 in zalloc /home/user/linux/tools/lib/perf/../../lib/zalloc.c:8:9
    #2 0x7f999e in evlist__new /home/user/linux/tools/perf/util/evlist.c:77:26
    #3 0x8ad938 in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3797:20
    #4 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6
    #5 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10
    #6 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12
    #7 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11
    #8 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8
    #9 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2
    #10 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3
    #11 0x7f5260654b74  (/lib64/libc.so.6+0x27b74)

Indirect leak of 568 byte(s) in 1 object(s) allocated from:
    #0 0x4f4137 in calloc (/home/user/linux/tools/perf/perf+0x4f4137)
    #1 0xbe3d56 in zalloc /home/user/linux/tools/lib/perf/../../lib/zalloc.c:8:9
    #2 0x80ce88 in evsel__new_idx /home/user/linux/tools/perf/util/evsel.c:268:24
    #3 0x8aed93 in evsel__new /home/user/linux/tools/perf/util/evsel.h:210:9
    #4 0x8ae07e in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3853:11
    #5 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6
    #6 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10
    #7 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12
    #8 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11
    #9 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8
    #10 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2
    #11 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3
    #12 0x7f5260654b74  (/lib64/libc.so.6+0x27b74)

Indirect leak of 264 byte(s) in 1 object(s) allocated from:
    #0 0x4f4137 in calloc (/home/user/linux/tools/perf/perf+0x4f4137)
    #1 0xbe3d56 in zalloc /home/user/linux/tools/lib/perf/../../lib/zalloc.c:8:9
    #2 0xbe3e70 in xyarray__new /home/user/linux/tools/lib/perf/xyarray.c:10:23
    #3 0xbd7754 in perf_evsel__alloc_id /home/user/linux/tools/lib/perf/evsel.c:361:21
    #4 0x8ae201 in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3871:7
    #5 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6
    #6 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10
    #7 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12
    #8 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11
    #9 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8
    #10 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2
    #11 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3
    #12 0x7f5260654b74  (/lib64/libc.so.6+0x27b74)

Indirect leak of 32 byte(s) in 1 object(s) allocated from:
    #0 0x4f4137 in calloc (/home/user/linux/tools/perf/perf+0x4f4137)
    #1 0xbe3d56 in zalloc /home/user/linux/tools/lib/perf/../../lib/zalloc.c:8:9
    #2 0xbd77e0 in perf_evsel__alloc_id /home/user/linux/tools/lib/perf/evsel.c:365:14
    #3 0x8ae201 in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3871:7
    #4 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6
    #5 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10
    #6 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12
    #7 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11
    #8 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8
    #9 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2
    #10 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3
    #11 0x7f5260654b74  (/lib64/libc.so.6+0x27b74)

Indirect leak of 7 byte(s) in 1 object(s) allocated from:
    #0 0x4b8207 in strdup (/home/user/linux/tools/perf/perf+0x4b8207)
    #1 0x8b4459 in evlist__set_event_name /home/user/linux/tools/perf/util/header.c:2292:16
    #2 0x89d862 in process_event_desc /home/user/linux/tools/perf/util/header.c:2313:3
    #3 0x8af319 in perf_file_section__process /home/user/linux/tools/perf/util/header.c:3651:9
    #4 0x8aa6e9 in perf_header__process_sections /home/user/linux/tools/perf/util/header.c:3427:9
    #5 0x8ae3e7 in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3886:2
    #6 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6
    #7 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10
    #8 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12
    #9 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11
    #10 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8
    #11 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2
    #12 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3
    #13 0x7f5260654b74  (/lib64/libc.so.6+0x27b74)

SUMMARY: AddressSanitizer: 3728 byte(s) leaked in 7 allocation(s).
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210624231926.212208-1-rickyman7@gmail.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

In perf annotate, when 's' is pressed on a line containing source code,
it shows the message "Only available for assembly lines".

This patch gets rid of the error, moving the cursr to the next available
asm line (or the closest previous one if no asm line is found moving
forwards), before hiding source code lines.

Changes in v2:
 - handle case of no asm line found in
   annotate_browser__find_next_asm_line by returning NULL and
   handling error in caller.
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210624223423.189550-1-rickyman7@gmail.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>