- 21 Jul, 2022 1 commit
-
-
Jason Wang authored
The semicolon after the `}' is unneeded. Signed-off-by:
Jason Wang <wangborong@cdjrlc.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
- 20 Jul, 2022 1 commit
-
-
John Harrison authored
A bunch of code was copy/pasted using pr_err as the default way to report errors. However, drm_err is significantly more useful in identifying where the error came from. So update the code to use that instead. Signed-off-by:
John Harrison <John.C.Harrison@Intel.com> Reviewed-by:
Ashutosh Dixit <ashutosh.dixit@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220715004028.2126239-1-John.C.Harrison@Intel.com
-
- 19 Jul, 2022 3 commits
-
-
Daniele Ceraolo Spurio authored
This patch re-introduces support for GuC v69 in parallel to v70. As this is a quick fix, v69 has been re-introduced as the single "fallback" guc version in case v70 is not available on disk and only for platforms that are out of force_probe and require the GuC by default. All v69 specific code has been labeled as such for easy identification, and the same was done for all v70 functions for which there is a separate v69 version, to avoid accidentally calling the wrong version via the unlabeled name. When the fallback mode kicks in, a drm_notice message is printed in dmesg to inform the user of the required update. The existing logging of the fetch function has also been updated so that we no longer complain immediately if we can't find a fw and we only throw an error if the fetch of both the base and fallback blobs fails. The plan is to follow this up with a more complex rework to allow for multiple different GuC versions to be supported at the same time. v2: reduce the fallback to platform that require it, switch to firmware_request_nowarn(), improve logs. Fixes: 2584b354 ("drm/i915/guc: Update to GuC version 70.1.1") Link: https://lists.freedesktop.org/archives/intel-gfx/2022-July/301640.htmlSigned-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Dave Airlie <airlied@gmail.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Acked-by:
-
Ashutosh Dixit authored
Add the following sysfs files to gt/gtN/.defaults/: * rps_min_freq_mhz * rps_max_freq_mhz v2: Correct gt/gtN/.defaults/* file names in commit message v3: Remove rps_boost_freq_mhz since it is not consumed by userspace Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by:
-
Ashutosh Dixit authored
Create a gt/gtN/.defaults/ directory (similar to engine/<engine-name>/.defaults/) to expose default parameter values for each gt in sysfs. This allows userspace to restore default parameter values after they have changed. The empty 'struct gt_defaults' will be populated by subsequent patches. v2: Changed 'struct intel_rps_defaults rps_defaults' to 'struct gt_defaults defaults' (Andi) Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by:
-
- 15 Jul, 2022 1 commit
-
-
Chris Wilson authored
When resuming after hibernate sometimes we see hangs in unrelated kernel subsystems. These hangs often result in the following i915 trace: i915 0000:00:02.0: [drm] *ERROR* \ intel_gt_reset_global timed out, cancelling all in-flight rendering implying our reset task has been starved by the hanging kernel subsystem, causing us to inappropiately declare the system as wedged beyond recovery. The trace would be caused by our synchronize_srcu_expedited() taking more than the allowed 5s due to the unrelated kernel hang. But we neither need to perform that synchronisation inside the reset watchdog, nor do we need such a short timeout before declaring the device as unrecoverable. v2: Restore watchdog timeout to the previous 5 seconds (Ashutosh) Bug: https://gitlab.freedesktop.org/drm/intel/-/issues/3575Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220630043959.5708-1-ashutosh.dixit@intel.com
-
- 13 Jul, 2022 4 commits
-
-
Priyanka Dandamudi authored
For testing purposes, support forcing the lmem_bar_size through a new modparam. In CI we only have a limited number of configurations for DG2, but we still need to be reasonably sure we get a usable device (also verifying we report the correct values for things like probed_cpu_visible_size etc) with all the potential lmem_bar sizes that we might expect see in the wild. v2: Update commit message and a minor modification.(Matt) v3: Optimised lmem bar size code and modified code to resize bar maximum upto lmem_size instead of maximum supported size.(Nirmoy) v4: Optimised lmem bar size code.(Nirmoy) Signed-off-by:
Priyanka Dandamudi <priyanka.dandamudi@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by:
Nirmoy Das <nirmoy.das@intel.com> Signed-off-by:
-
Akeem G Abodunrin authored
Add support for the local memory PICe resizable bar, so that local memory can be resized to the maximum size supported by the device, and mapped correctly to the PCIe memory bar. It is usual that GPU devices expose only 256MB BARs primarily to be compatible with 32-bit systems. So, those devices cannot claim larger memory BAR windows size due to the system BIOS limitation. With this change, it would be possible to reprogram the windows of the bridge directly above the requesting device on the same BAR type. v2:Moved code to gt/intel_region_lmem.c and used only single underscore for function names.(Jani) v3: Optimised code. Signed-off-by:
Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by:
Michał Winiarski <michal.winiarski@intel.com> Cc: Stuart Summers <stuart.summers@intel.com> Cc: Michael J Ruhl <michael.j.ruhl@intel.com> Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Matt Roper authored
Accidental use of a "SLICE" macro where a "SUBSLICE" macro was intended causes the group ID for steering to be calculated incorrectly on pre-Xe_HP platforms. Fixes: 9a92732f ("drm/i915/gt: Add general DSS steering iterator to intel_gt_mcr") Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220712220513.3451794-1-matthew.d.roper@intel.com
-
Matthew Auld authored
Since segment_pages is no longer a compile time constant, it looks the DIV_ROUND_UP(node->size, segment_pages) breaks the 32b build. Simplest is just to use the ULL variant, but really we should need not need more than u32 for the page alignment (also we are limited by that due to the sg->length type), so also make it all u32. Reported-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Fixes: bc99f120 ("drm/i915/ttm: fix sg_table construction") Signed-off-by:
-
- 12 Jul, 2022 7 commits
-
-
Andrzej Hajda authored
On some machines hole_end can be small enough to cause subtraction overflow. On the other side (addr + 2 * min_alignment) can overflow in case of mock tests. This patch should handle both cases. Fixes: e1c5f754 ("drm/i915: Avoid overflow in computing pot_hole loop termination") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3674Signed-off-by:
Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by:
Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by:
-
Chris Wilson authored
One impact of commit 047a1b87 ("dma-buf & drm/amdgpu: remove dma_resv workaround") is that it stores many, many more fences. Whereas adding an exclusive fence used to remove the shared fence list, that list is now preserved and the write fences included into the list. Not just a single write fence, but now a write/read fence per context. That causes us to have to track more fences than before (albeit half of those are redundant), and we trigger more interrupts for multi-engine workloads. As part of reducing the impact from handling more signaling, we observe we only need to kick the signal worker after adding a fence iff we have good cause to believe that there is work to be done in processing the fence i.e. we either need to enable the interrupt or the request is already complete but we don't know if we saw the interrupt and so need to check signaling. References: 047a1b87 ("dma-buf & drm/amdgpu: remove dma_resv workaround") Signed-off-by:
Karolina Drobnik <karolina.drobnik@intel.com> Reviewed-by:
-
Chris Wilson authored
In monitoring a transcode pipeline that is latency sensitive (it waits between submitting frames, and each frame requires work on rcs/vcs/vecs engines), it is found that it took longer than a single jiffy for it to sustain its workload. Allowing an extra jiffy headroom for the userspace prevents us from prematurely parking and having to exit powersaving immediately. Link: https://gitlab.freedesktop.org/drm/intel/-/issues/6284Signed-off-by:
-
Chris Wilson authored
We employ a "waitboost" heuristic to detect when userspace is stalled waiting for results from earlier execution. Under latency sensitive work mixed between the gpu/cpu, the GPU is typically under-utilised and so RPS sees that low utilisation as a reason to downclock the frequency, causing longer stalls and lower throughput. The user left waiting for the results is not impressed. On applying commit 047a1b87 ("dma-buf & drm/amdgpu: remove dma_resv workaround") it was observed that deinterlacing h264 on Haswell performance dropped by 2-5x. The reason being that the natural workload was not intense enough to trigger RPS (using HW evaluation intervals) to upclock, and so it was depending on waitboosting for the throughput. Commit 047a1b87 ("dma-buf & drm/amdgpu: remove dma_resv workaround") changes the composition of dma-resv from keeping a single write fence + multiple read fences, to a single array of multiple write and read fences (a maximum of one pair of write/read fences per context). The iteration order was also changed implicitly from all-read fences then the single write fence, to a mix of write fences followed by read fences. It is that ordering change that belied the fragility of waitboosting. Currently, a waitboost is inspected at the point of waiting on an outstanding fence. If the GPU is backlogged such that we haven't yet stated the request we need to wait on, we force the GPU to upclock until the completion of that request. By changing the order in which we waited upon requests, we ended up waiting on those requests in sequence and as such we saw that each request was already started and so not a suitable candidate for waitboosting. Instead of asking whether to boost each fence in turn, we can look at whether boosting is required for the dma-resv ensemble prior to waiting on any fence, making the heuristic more robust to the order in which fences are stored in the dma-resv. Reported-by:
Thomas Voegtle <tv@lio96.de> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6284 Fixes: 047a1b87 ("dma-buf & drm/amdgpu: remove dma_resv workaround") Signed-off-by:
-
Chris Wilson authored
Avoid trying to invalidate the TLB in the middle of performing an engine reset, as this may result in the reset timing out. Currently, the TLB invalidate is only serialised by its own mutex, forgoing the uncore lock, but we can take the uncore->lock as well to serialise the mmio access, thereby serialising with the GDRST. Tested on a NUC5i7RYB, BIOS RYBDWi35.86A.0380.2019.0517.1530 with i915 selftest/hangcheck. Cc: stable@vger.kernel.org # v4.4 and upper Fixes: 7938d615 ("drm/i915: Flush TLBs before releasing backing store") Reported-by:
Mauro Carvalho Chehab <mchehab@kernel.org> Tested-by:
Chris Wilson <chris.p.wilson@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by:
Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by:
-
Chris Wilson authored
Don't allow two engines to be reset in parallel, as they would both try to select a reset bit (and send requests to common registers) and wait on that register, at the same time. Serialize control of the reset requests/acks using the uncore->lock, which will also ensure that no other GT state changes at the same time as the actual reset. Cc: stable@vger.kernel.org # v4.4 and upper Reported-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by:
Andi Shyti <andi.shyti@intel.com> Reviewed-by:
-
Matt Roper authored
This workaround may need to be extended to other platforms soon, but for now it's marked as DG2-specific. Signed-off-by:
Arun R Murthy <arun.r.murthy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220708215804.2889246-1-matthew.d.roper@intel.com
-
- 11 Jul, 2022 2 commits
-
-
Matthew Auld authored
If we encounter some monster sized local-memory page that exceeds the maximum sg length (UINT32_MAX), ensure that don't end up with some misaligned address in the entry that follows, leading to fireworks later. Also ensure we have some coverage of this in the selftests. v2(Chris): - Use round_down consistently to avoid udiv errors v3(Nirmoy): - Also update the max_segment in the selftest Fixes: f701b16d ("drm/i915/ttm: add i915_sg_from_buddy_resource") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6379Signed-off-by:
-
Dan Carpenter authored
The shmem_pin_map() function doesn't return error pointers, it returns NULL. Fixes: be1cb55a ("drm/i915/gt: Keep a no-frills swappable copy of the default context state") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
- 08 Jul, 2022 5 commits
-
-
Radhakrishna Sripada authored
Add Meteorlake PCI IDs. Split into M, and P subplatforms. v2: Update PCI id's v3: Move id 7d60 under MTL_M(MattR) Bspec: 55420 Signed-off-by:
Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by:
-
Radhakrishna Sripada authored
MTL has Xe_LPD+ display IP (version = 14), MTL graphics IP (version = 12.70), and Xe_LPM+ media IP (version = 13). Bspec: 55413 Bspec: 55416 Bspec: 55417 Bspec: 55418 Bspec: 55726 Bspec: 45544 Bspec: 65380 v2: rearrange the fields in pci_info(MattR) Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Matt Roper authored
Although all DSS belong to a single pool on Xe_HP platforms (i.e., they're not organized into slices from a topology point of view), we do still need to pass 'group' and 'instance' targets when steering register accesses to a specific instance of a per-DSS multicast register. The rules for how to determine group and instance IDs (which previously used legacy terms "slice" and "subslice") varies by platform. Some platforms determine steering by gslice membership, some platforms by cslice membership, and future platforms may have other rules. Since looping over each DSS and performing steered unicast register accesses is a relatively common pattern, let's add a dedicated iteration macro to handle this (and replace the platform-specific "instdone" loop we were using previously. This will avoid the calling code needing to figure out the details about how to obtain steering IDs for a specific DSS. Most of the places where we use this new loop are in the GPU errorstate code at the moment, but we do have some additional features coming in the future that will also need to loop over each DSS and steer some register accesses accordingly. Signed-off-by:
Matt Atwood <matthew.s.atwood@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220701232006.1016135-1-matthew.d.roper@intel.com
-
Umesh Nerlige Ramappa authored
The global sseu config is applicable only to gen11 platforms where concurrent media, render and OA use cases may cause some subslices to be turned off and hence lose NOA configuration. Ideally we want to return ENODEV for non-gen11 platforms, however, this has shipped with gfx12, so disable only for gfx12.50+. v2: gfx12 is already shipped with this, disable for gfx12.50+ (Lionel) v3: (Matt) - Update commit message and replace "12.5" with "12.50" - Replace DRM_DEBUG() with driver specific drm_dbg() Signed-off-by:
Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Acked-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by:
-
Umesh Nerlige Ramappa authored
DRM_DEBUG is not the right debug call to use in i915 OA, replace it with driver specific drm_dbg() call (Matt). Signed-off-by:
-
- 07 Jul, 2022 1 commit
-
-
Chris Wilson authored
Since we are not holding a wakeref, shrinking a bound object is not guaranteed. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6370Signed-off-by:
-
- 06 Jul, 2022 1 commit
-
-
Alan Previn authored
Both error-capture and relay-logging mechanism use the GuC log infrastructure. That means the KMD must send a log flush complete notification back to GuC after reading the data out. This call is currently being sent synchronously. However, synchronous H2Gs cause problems when the system is backed up. There is no need for this to be synchronous. The KMD wasn't even looking at the return status from it. So make it asynchronous and then there is no issue about time outs. Signed-off-by:
Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by:
-
- 04 Jul, 2022 1 commit
-
-
Thomas Hellström authored
In vma destruction, the following race may occur: Thread 1: Thread 2: i915_vma_destroy(); ... list_del_init(vma->vm_link); ... mutex_unlock(vma->vm->mutex); __i915_vm_release(); release_references(); And in release_reference() we dereference vma->vm to get to the vm gt pointer, leading to a use-after free. However, __i915_vm_release() grabs the vm->mutex so the vm won't be destroyed before vma->vm->mutex is released, so extract the gt pointer under the vm->mutex to avoid the vma->vm dereference in release_references(). v2: Fix a typo in the commit message (Andi Shyti) Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5944 Fixes: e1a7ab4f ("drm/i915: Remove the vm open count") Cc: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Signed-off-by:
Nirmoy Das <nirmoy.das@intel.con> Reviewed-by:
-
- 01 Jul, 2022 13 commits
-
-
Niranjana Vishwanathapura authored
VM_BIND and related uapi definitions v2: Reduce the scope to simple Mesa use case. v3: Expand VM_UNBIND documentation and add I915_GEM_VM_BIND/UNBIND_FENCE_VALID and I915_GEM_VM_BIND_TLB_FLUSH flags. v4: Remove I915_GEM_VM_BIND_TLB_FLUSH flag and add additional documentation for vm_bind/unbind. v5: Remove TLB flush requirement on VM_UNBIND. Add version support to stage implementation. v6: Define and use drm_i915_gem_timeline_fence structure for all timeline fences. v7: Rename I915_PARAM_HAS_VM_BIND to I915_PARAM_VM_BIND_VERSION. Update documentation on async vm_bind/unbind and versioning. Remove redundant vm_bind/unbind FENCE_VALID flag, execbuf3 batch_count field and I915_EXEC3_SECURE flag. v8: Remove I915_GEM_VM_BIND_READONLY and minor documentation updates. Signed-off-by:Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
-
Niranjana Vishwanathapura authored
Add some missing i915 uapi documentation which the new i915 VM_BIND feature documentation will be refer to. Signed-off-by:
-
Niranjana Vishwanathapura authored
VM_BIND design document with description of intended use cases. v2: Reduce the scope to simple Mesa use case. v3: Expand documentation on dma-resv usage, TLB flushing and execbuf3. v4: Remove vm_bind tlb flush request support. v5: Update TLB flushing documentation. v6: Update out of order completion documentation. Signed-off-by: -
Matt Roper authored
Small BAR support has now landed, which allows us to add the PCI IDs that correspond to add-in card designs of DG2 and ATS-M. There's also one additional MB-down PCI ID that recently appeared (0x5698) so we add it too. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
-
Gustavo Sousa authored
A new PVC-specific workaround has just been added to the BSpec. BSpec: 64027 Signed-off-by:
Gustavo Sousa <gustavo.sousa@intel.com> Reviewed-by:
-
Matthew Auld authored
With the uAPI in place we should now have enough in place to ensure a working system on small BAR configurations. v2: (Nirmoy & Thomas): - s/full BAR/Resizable BAR/ which is hopefully more easily understood by users. Signed-off-by: -
Matthew Auld authored
Falling back to memcpy/memset shouldn't be allowed if we know we have CCS state to manage using the blitter. Otherwise we are potentially leaving the aux CCS state in an unknown state, which smells like an info leak. Fixes: 48760ffe ("drm/i915/gt: Clear compress metadata for Flat-ccs objects") Signed-off-by:
Ramalingam C <ramalingam.c@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220629174350.384910-12-matthew.auld@intel.com
-
Matthew Auld authored
If the move or clear operation somehow fails, and the memory underneath is not cleared, like when moving to lmem, then we currently fallback to memcpy or memset. However with small-BAR systems this fallback might no longer be possible. For now we use the set_wedged sledgehammer if we ever encounter such a scenario, and mark the object as borked to plug any holes where access to the memory underneath can happen. Add some basic selftests to exercise this. v2: - In the selftests make sure we grab the runtime pm around the reset. Also make sure we grab the reset lock before checking if the device is wedged, since the wedge might still be in-progress and hence the bit might not be set yet. - Don't wedge or put the object into an unknown state, if the request construction fails (or similar). Just returning an error and skipping the fallback should be safe here. - Make sure we wedge each gt. (Thomas) - Peek at the unknown_state in io_reserve, that way we don't have to export or hand roll the fault_wait_for_idle. (Thomas) - Add the missing read-side barriers for the unknown_state. (Thomas) - Some kernel-doc fixes. (Thomas) v3: - Tweak the ordering of the set_wedged, also add FIXME. Signed-off-by: -
Matthew Auld authored
We should always be explicit and allocate a fence slot before adding a new fence. Signed-off-by:
-
Matthew Auld authored
It's not supported, and just skips later anyway. With small-BAR things get more complicated since all of stolen is likely not even CPU accessible, hence not passing I915_BO_ALLOC_GPU_ONLY just results in the object create failing. Signed-off-by:
-
Matthew Auld authored
A non-recoverable context must be used if the user wants proper error capture on discrete platforms. In the future the kernel may want to blit the contents of some objects when later doing the capture stage. Also extend to newer integrated platforms. v2(Thomas): - Also extend to newer integrated platforms, for capture buffer memory allocation purposes. v3 (Reported-by: kernel test robot <lkp@intel.com>): - Fix build on !CONFIG_DRM_I915_CAPTURE_ERROR Testcase: igt@gem_exec_capture@capture-recoverable Signed-off-by: -
Matthew Auld authored
Skip capturing any lmem pages that can't be copied using the CPU. This in now only best effort on platforms that have small BAR. Testcase: igt@gem-exec-capture@capture-invisible Signed-off-by:
-
Matthew Auld authored
If set, force the allocation to be placed in the mappable portion of I915_MEMORY_CLASS_DEVICE. One big restriction here is that system memory (i.e I915_MEMORY_CLASS_SYSTEM) must be given as a potential placement for the object, that way we can always spill the object into system memory if we can't make space. Testcase: igt@gem-create@create-ext-cpu-access-sanity-check Testcase: igt@gem-create@create-ext-cpu-access-big Signed-off-by:
-
